Electronics Corporation Of Tamil Nadu Limited Tender

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Providing and laying in position, Standardized Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and downgraded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticizer / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Supplying, fabricating , installing and fixing in position structural steel work and inserts comprising edge angle, MS angles, plates, tees, flats, and other structural steel sections as per drawings holding down bolts, anchor bolts, anchor plates, pipe sleeves etc., The rate is includes cutting, welding, bending to shape fabricating, drilling holes, threading, welding lugs etc., with all tools, tackles and labour as per design and drawing and as directed by site in charge.The rate includes of painting, including surface cleaning, wire brushing, removal of mills, scale, dust, rust, oil and grease etc., applying one coat of red oxide Zinc chromate primer and two or more coats of Synthetic enamel paint in approved colour and shade etc., complete as directed by the Executive Engineer before use on works

Supply of 120W LED light fittings as per technical specification enclosed etc. with Warranty of Two years from the date of commissioning all complete complying with standard specification.

Installation and Commissioning of 120W LED light etc. all complete complying with standard specification.

1.5 sq.mm PVC Coated multistranded Copper wire each of 10mtr length (Red, Black, Green) Colours - per fitting 45mtr etc. all complete complying with standard specification.

Double Pole MCB 6/10Amps with Din Trail 1/2 Mtr etc. all complete complying with standard specification.

32A MCB TPN with Din Trail 1/2 Mtr etc. all complete complying with standard specification.

8SWG GI wire for ploe earthing etc. all complete complying with standard specification.

32mm GI pipe 4mtr length as per standards etc. all complete complying with standard specification.

SUPPLYING AND ERECTION OF 8MTR HEIGHT OCTAGONAL STREET LIGHT POLE FREE STANDING DOUBLE ARM a. Height of pole : 8Mtrs. b. Size of pole : Top 70 mm X Bottom 130mm c. Thickness : 3mm d. Base plate : 250 x 250 x 12mm as per IS-875 with following specification. e. Foundation Bolt : M16 x 600mm (4 No’s) along with bolts (EN 8 grade) and necessary lock nuts & washers. f. Wind Loads for design : As per IS-875 g. Metal protection treatment : Hot Dip Galvanized confirming to BSEN ISO 1461 [65 micron thickness] h. M 20 X 700mm long ‘J’ type foundation bolts (EN 8 grade) and necessary nuts & washers.

SUPPLYING AND ERECTION OF 8 MTR HEIGHT OCTAGONAL STREET LIGHT POLE FREE STANDING SINGLE ARM a. Height of pole : 8Mtrs. b. Size of pole : Top 70 mm X Bottom 130mm c. Thickness : 3mm d. Base plate : 220 x 220 x 10mm as per IS-875 with following specification. e. Foundation Bolt : M16 x 600mm (4 No’s) along with bolts (EN 8 grade) and necessary lock nuts & washers. f. Wind Loads for design : As per IS-875 g. Metal protection treatment : Hot Dip Galvanized confirming to BSEN ISO 1461 [65 micron thickness] h. M 20 X 700mm long ‘J’ type foundation bolts (EN 8 grade) and necessary nuts & washers.

Supply and laying of 4 core x 10 sq.mm PVC armoured Copper cable in a depth of 500mm in ground wherever trench is not available, excavated trench to be refill and finished to its orginal condition and Cable Termination (Make: HAVELLS/POLYCAB / PARACON /FINOLEX )

Supply and laying of 4 core x 6 sq.mm armoured Copper cable in a depth of 500mm in ground wherever trench is not available, excavated trench to be refill and finished to its orginal condition and Cable Termination (Make: HAVELLS/POLYCAB / Qublex /FINOLEX/ ORBIT )

Supply and fixing of Steel Cable glands suitable for 4 core x 10 sq.mm L.T.U.G. cable with cable Lugs as per standard specification

Supply and fixing of Steel Cable glands suitable for 4 core x 6 sq.mm L.T.U.G. cable with cable Lugs as per standard specification

Supply, Installation, Testing & Commissioning with Street light Controller (SLC) THREE Phase as per technical specification enclosed suitable for outdoor type, Using with 50mm x 50mm MS "L" Angle support in such way to errect panel at height of 500mm from ground Level with Warranty of Two years from the date of commissioning.

Supply & Installation, Testing & Commissioning of Main Lighting Panel , Industrial Type TPMCB DB with IP54 Protection Higher End a. 12 ways 3 phase DB b. Incomer 63 Amps TPN MCB - 1 No's c. Outgoing 32 Amps TPN MCB - 5 No's Enclosed self-standing type, suitable for outdoor type, Using with 50mm x 50mm MS "L" Angle support in such way to errect panel at height of 500mm from ground Level.

Preparation of CEIG Drawings, Liasioning with CEIG for Getting drawing approval for Electrical Inspector and original safety certificate, submit the original hard copy and soft copy (Statutory fees shall be reimbursed)