Directorate Of Town Panchayats Tender

Supply and delivery of UG/LT 35sq.mm 3.5. core 1.1.KV Grade Armoured Aluminium Conductor Cross Linked Poly Ethylene insulated PVC sheathed Cable Conforming to IS 7098 /1988 and as Amended Thereafter with ISI Marking (TWAD SR .pg.no.120. sl.no.6 )

Laying of 35sq,mm 3.5 core UG/LT Cable For laying Ground level including Earth work (As per Pg.no.122.(12.3) sl.no.1

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Manufacturing supplying and fixing of MILD STEEL Window made out of 40 x 40 x 6 mm M.S angle for outer frame, 35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets ( 18 G ) with 5Nos,of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers.

Supplying and fixing of rolling shutters shall be pull and push type (Gear operated) made of 18G/3" lathe sections which consist of five main parts such as curtain, lock plate, guide channels rollers and hood cover. These five main parts are made out of special components detailed below: curtain shall be of 18G/3" lath sections cut to required size and filled with heavy cast iron / MS clips. For 8'0"(2.45m) high rolling shutter lath sections provided shall be not less than 37 numbers. Lock plate shall be 10GMS sheet and attached to the side brackets with 20mm square bar.Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high carbon coil springs. 2 springs shall be supplied. Side brackets shall be of 10G MS plate and cast iron "U" clamps shall be rivetted to the side brackets. Roller shall be of heavy cast iron pullies fitted with heavy duty "C" class 40mm steel pipe and high tensile high arbon coil springs - 2 springs shall be supplied. Hood cover shall be of 0.8mm CRCA sheet reinforced with 25mmx25mmx3mm MS angle or gate channel. The rolling shutter in addition to the above should have pulling hook and shall be coated on exposed area with heavy coat of red oxide primer etc., complete.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Lower end) with 2 module 100W fan step regulator (Lower end) with 600mm down rod with fan clamp with side plates and cross arm of size 450mm (18")

supply and fixing of 48W LED street light fitting with LED (Higher end) with 25 mm dia. GI pipe (class B) with 1 no. 25 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting

Wiringwith2x1.5sq.mm. PVC insulatedsinglecoreunsheathedFRLScopper conductor cableof 1100Vgrade in suitable heavygaugeMSconduit pipeonwall andceilingwithMSaccessorieswith150mmx100mmx75mmMS switchbox influshwithwallwith3mmthickhylumsheet cover for5A3pinnon interlocking flush type CSplug with painting of suitable colour with continuous earthwire connection of 1.5 sq.mm copper wire wire for open plug point

Supply of 250 Lpm X 100m Head Open Well Submersible Bed Type Moter including Tranporting and all Labour Charges Etc., Complete

Supply and Delivery of 10Sqmm Copper Cable including Tranporting and all Labour Charges Etc., Complete

75HP-150HP/56-112KW Unit 1 No. Rate for 2024- 25 in Rupees 29141 1 No. (which includes LTCT meter panel board, 6Nos. suitable fuse carriers and 3 Nos. CT coil)

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplyandfixingof200ATPNsheetsteeldoublebreakswitchwithHRCfusesandneutralonsuitableangleironframe work with MS cable entry boxes PWD earthing SSD 154