Directorate Of Town Panchayats Tender

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for

Supplying and ertecting centering to sides and sofits including supports and strutting with necessary cross basing for plain surface such as RCC slabs rectangulars beams all beams lintgel etc..,centering for sofits up to 3 meter height using mild streel sheet of size 90 cm x60cmx 10mm gauge with MS angles of size 25mm x 25mmx3mm laid over silver oak (CW) joists of sizes 10 cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO :30 &86(for square beam ). FOOTING

COLUMN

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. BASEMENT

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - BASEMENT

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Brick work in cement mortar 1:5 mix using (One cement and five sand) using best quality of III class Country bricks of size (8 3/4"x4 1/4"x 2 3/4") for foundation including curing cost and conveyance of all materials to site and all labour charges etc., complete as per standard specification TNDSS specification No.31 & 31C- 10m3

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with Standard specification

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Plastering in Cement mortar 1:5 (one cement five crushed stone sand)using 12 mm thick including cost of conveyance of materials and labours charges etc.., complete as per standard specifications (MoRTH Specification :Clause :1000/1300)

Painting two coats with ready mixed plastic emulsion paint S.I.358 plastic emulsion paint of approved quality and colour over a priming coat,including through scrapping,clean removal of dirt,etc and complete and including necessary plaster of pairs of,putty,wherever required including cost snd conveyance of all materials and all labours charges etc..,complete as per standard specification and as directed by the department officers.TNBP No:66-A(SI.NO;358).

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333='C:\Users\hari\Desktop\hussain\BALAJI SIR\MARKET TUFIDCO\Santhosh\TS COPY Final\[Boothapandi Final Estimate TS Copy.xlsx]Detailed Estimate'!B390

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of roof with Roofing with Galvanised Coruugated Iron Sheet of 0.8mm thickness - 10 m2 thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supplying and fixing of M.S grill of approved design for doors, windows and ventilators using necessary mild steel flats for inner and outer memebers which should be fixed to window frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Supply and fixing of Water CO2 stored Pressure Type 9 liters capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation

Wiring with 2 x 1.5 sq.mm(22/0.3)PVC insulated SC unsheated copper conduter of 1100v grade in suitable PVC rigid pipe consealed in wall and ceiling with PVC acceries in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point/fan point(for electronic regulator)SD 18

Wiring with 2 x 1.5 sq.mm(22/0.3)PVC insulated SC unsheated copper conduter of 1100v grade in suitable PVC rigid pipe consealed in wall and ceiling with PVC acceries with 150 x 100 x 113mm TW switch box and 5A 3 switch with continous earth wire connection of 5A flushtype switch with painting of suitable colour with continues eartb wire connection 14 SWG TC wire for Concealed PVC Fan point (SD 19)

Wiring with 2x1.5sqmm PVC insulated SC unsheated CU conductor of 1100 V grade with ISI mark confirming to IS: 694/1990 in suitable PVC rigid pipe of 1.8mm thick with ISI mark concealed in wall and ceiling with PVC a0.45essories in flush with wall for 5 AMPS 3 PIN C.S. PLUG POINT AT CONVENIENT PLACES including the cost of cable, PVC pipes and specials, brass screws, flush type 5 amps 3 Pin C.S. plug, 16 gauge Msjoint box, 16 gauge MS switch box covered by laminated hylem sheet 3mm thick, cement, labour and making good of the concealed portion with suitable colour for concealed PVC plug point. SD -10

Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and LED tube)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work SD -211 PG N0 -211

Supply and fixing of 4way SP DB of 16A / Way with 16A DP switch with metal clad of 500 V (Side Handle) F&N on suitable angle iron frame work with trunking box MS cable SD -142

Supply and fixing og TNEB meter board suitable for 32A three phase service connection with 3 Nos 32 A fuse unit (500v) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW connection with 7/20 PVC insulated copper wire EB meter to fuse unit (SD 126)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipeconcealed in wall and ceiling with continuous earth wire connectionof 14SWG TC wire and making good of the concealed portion with suitable colour SD -351

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipeconcealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion withsuitable colour SD -70

Supplying and fixing of 60 W LED street Light Fitting with LED ( Philips /Havells) including cost of materials loading and unloading charges

Supply fixing and errection of CCTV Camara including cost and Conveyance of all materials to site etc complete as per Specification (5units / park)(PWD SOR Page (153 TO 157) a) CCTV Camera (Q)

CCTV Camera (Q)

Network Video Recorder (PWD SOR PG.NO :154)

Hard disc for NVR 4TB (PWD SOR PG.NO :155)

24 Port Patch Panel (PWD SOR PG.NO :156)

Rack With Accesssories -4U (PWD SOR PG.NO :155)

Armoured LAN & CCTV Cable (CAT-6) (PWD SOR PG.NO 153)