Directorate Of Town Panchayats Tender

Providing and laying Tack Coat over WBM/ WMM Surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5

Providing and laying 50 mm conslidated thick Dense Bituminuous macadam using 0.24 cum of 26.50-13.20 mm,0.25cum of 13.20-2.36mm and 0.23cum of 2.36mm and below and with 53.20kg of vt 30 bitumen premixing 10 sqm including cost and conveyance of all materials to CMP site,heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tons capacity,conveying the mix by tipper trucks to work site,spreading the mix uniform thickness of 50mm with paver to the specified grade and cross sections and compaction by vibratory/ pneumapic roller to the required density etc., including labour for accending to pavor at sites etc., including hire charges and fuel charges for 20-30 CMP with bitumen tipper trucks, paver finisher/9 m paver finisher,vibratory/ pneumapic rollers and all other tools and plant required including to all other incidental charges etc., complete as per specification using CMP as clause 505 MORTH Rev-5.

Providing and laying 30 mm thick compacted Bituminous concrete which shall consist of construction of a single course / Wearing course on previously prepared bituminous base to the requirements of the specification using 45.27 kg 60/70 grade bitumen and 5.03 kg Shredding plastic per 10 sqm with CMP & Paver., heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant-tons capacity, conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 30mm with machanical paver to the specified grades and cross sections and compaction by Vibrator roller to the required density etc., including labour for loading for loading for loading bitumen into bitumen tank and metal feeder unit, labour for attending to paver site etc including hire charges and fuel charges for 20-30 CMP with bitumen tipper trucks paver finisher, power rollers and all other tools and plant required including all other incidental charges etc., complete as per specification using CMP as per MORTH Standard Specification using CMP as per Clause.111, 112, 501, 508 and 900.

Road marking with Hot applied Thermoplastic compound with Reflectorising Glass beads on Bituminous Surface,Providing and laying of hot applied thermoplastic compound 2.5 mm. thick including reflectorising glass beads @ 250 gms. per sqm. area, thickness of 2.5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes etc. complete. (as per MORT & H specification No.803).