Directorate Of Town Panchayats Tender

Providing and laying tack coat of 2.50 kgs/10 sqm over the BT surface treated with binder using 2.50 kgs of bituminous Emulsion RS1 for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev V Specifications

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5

Providing and laying Bituminous Concrete to 30mm thick using 0.13 cum of 19.00 - 9.50mm, 0.17cum of 9.50 -2.36mm and 0.26cum of 2.36 and below with 45.27kgs of VG30 / VG40 bitumen for premixing and 5.03 Kg of threaded plastic waste per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min required temperature in central hot mix plant 20-30ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5.

Collection, Supply and filling of Well Gravel including cost and conveyance of gravel to work site and all labour charges for stacking them to departmental gauge at road sides for premeasurement by the departmental officers and spreading and compacting

Road Marking with Hot Applied Thermoplastic Compound with Refletiorising Glass Beads on Bituminous Surface - Providing and lying of hot applied thermoplastic compound 2.5mm thick including refectorising glass beads @250gms per sqm area, thickness of 2.5mm exclusive of surface applied glass beads as per IRC 35. The finished surface to be level uniform and free from streaks and holes, etc.,

Providing and erecting direction and place identification Refro - reflectroised signs made out of cube corner Micro Prismatic Grade Sheeting Confirming to type-xi standards of IRC-67 : 2012 and ASTM D 4956-09,Specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mm x25mm x 3mm mild steell single and surrounded on a mild steel angle post 75x75x6mm with a clear height of not less than 2.10m from the ground level to the bottom of the signboard and 0.60 below ground level.The Retro-reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of three year outdoor exposure report shall be obtained as per IRC 67:2012 (as per MORTH and H Specification No.801) ( For location of black spot, curve sharp bend, junction, ghat Roads and Critical Zone.