Directorate Of Town Panchayats Tender

Suppling and fixing of 20 mm thick Cudapah slab including cost and conveyance of all materials and all labour charges etc. complete as per standard specification

Supply and fabrication of steel using TMT rods for all Reinforced cement concrete works including cost and conveyance of all materials and all labour charges for cuting, bending and placing the rod in position and tying up the rods with binding wire and other incidental charges etc., complete. as per standard specification SS 86 7 & 3, 86A V, VI & VII

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456-2000 Using 20mm and down grade hard broken granite Stone jelly for all RCC items of works with mimimum cement contenet of 325 kg /cum and maximum water cement ratio of 0.55 incluting admixtur (plasticier /super plasticiser ) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workabillity without imparing strength and durabillity with about (5.0cum), 7730kg of 20mm machine crushed stone jelly and with about (3.3cum),5156 kg of 10- 12mm machine crushed stone jelly and with about (4.79 cum) 7670kg of sand but excluting cost of reinforcedment grill and fabricating charges centering and shuttering but incluting laying vibrating with machine vibrating ,finishing ,curring ,etc,,and providing fixtures like fan clamps in the RCC Floor /roof slabs wherever necessary without claiming extra cost etc., compete complying with standard specificaton and as directed by the departmental officer -The Coarse and Fine aggregates to be used should comply with the requirements of IS Standards. (No separate payments will be made by the depatment for the excess usage of materials )

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge

Granolythic Floor finishing with Plain Cement Concrete 1:2:4mix, (One Part of Cement Two Part of Sand Four Part of Aggregate ) 25mm thick using ISS 6 to 10 mm Chips including cost and conveyance of all materials and all labour charges for mixing, laying, compacting and curing the concrete to site and other incidental charges etc., complete. as per standard specification 28 V & VI, S25

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Providing and laying of 83mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.