Directorate Of Town Panchayats Tender

Plain Cement Concrete 1:2:4 Mix (one Part of cement, two Part of M- Sand and four Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and laying Rubberised interlocking Paver block M50 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2007 Of rubberized interlocking paver lock in size of minimum compressive strength of 30N mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

RCC 1:1½:3 (One cement one point five sand and three aggregates) mix using 20mm gauge hard granite broken stone jelly in all RCC works connected to the work excluding shuttering , Centering and cost of Reinforcement grills but including curing ,finishing etc complete with standard specification and as directed by Engineer incharge.

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire and labour charges for cutting bending tying etc . Complete complying with standard specification in force and as directed by department officials.-

Supplying and Fixing weld mesh 7.5 X5.00 cm 10 gauge tranporting fitting as per standard specification.

Pipe standard with an earth electrode of 6Mtr. Class 'B' GI pipe of dia not less than 80mm complete with necessary masonry work

Manufacturing and supplying and fixing of position of column IS HB 450 , IS HB 250 RCC 100X50 angle of available length fixing of equal distsnce including cost and conveyance all materials and all labour charges etc.., complete

Fabricating supplying and fixing of pre painted galvanium iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.060 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Plastering walls with cement mortar 1:5 (One cement five P-Sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges,Curing etc completeand as directed by department officials..

Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 10mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57

Paving the flooring with Vitrified tiles of size 600mm x 600mm x 8mm of approved colour and quality laid in cement mortar 1:3 (one cement and three sand ) 20mm thick in all floors and the top pointed with the colour cement etc., complete.

Supplying and fixing of M.S. grill using M.S. angle frames and inner using 10 x 10mm square rods including cost of M.S. angles (25mm x 25 mm x 6mm) T , L angles, flats and square rods in proper position including labour charges for cutting, welding, and including labour charges for priming cost of red oxide painting and erection in a proper position etc. complete as per standard specification and Grill design , Thickness of square rod are approved by the departmental engineers.

Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification.

Weathering course with Brick jelly lime concrete using 20mm gauge brick jelly in pure slaked lime ( no sand to be added ) over roof slab, the proportion of brick jelly to lime being '32 to 12.5 laid in a single layer of required thickness and slope and top well beaten with wooden beaters by constanly wetted the surface by sprinkling lime jaggary water etc complete., as per standard specification.

Finishing with top of roof with one course of Machine Pressed Tiles of 20mm thick of approved quality laid in cement mortar 1:3 12mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same red oxide mixed mortar etc complete. As per standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification .

Supply and delivery of PVC,C.I /D/F and RCC Pipes to a standard length of 6m with a one end socket and other end free the rate should inclusive of all taxes. The pipes should be quaranteed for pressure.

90mm PVC Pipe 6 KSC/CM2

90mm PVC Coupler

90 mm PVC Dummy

90mm PVC Bend

90mm PVC TEE

Lowering PVC rigid pipes and special to trench and laying to proper grade and alignment with PVC coupler and cement paste and excuting to required pressure including conveyance of water for filling during testing etc completed as per standard specification.

Refilling the excavated earth for the pipe line laying as per standard specification.