Directorate Of Town Panchayats Tender

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3 M height for plain surfaces such as RCC Slab. Rectangular beams,. Tee Beam (or) L Beams Lintel,.Bed Block, Slabs landing slabs square or round column etc., as detalied below with all cross bracings using M.S.Sheets of size 90 cm x 60 cm and BG 10 stiffened with welded M.S.Angles of size 25x225x3 mm for boarding laid over silver oak or countrey wood joists of 10cm to 13cm dia spaced at an intervals of 75 cm c/c etc., complete complying with standard spefication as directed by departamental officers TNDSS NO: 30& 86

Circular surface

Plain Surface

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials)

Brick work in Cement mortar 1:5 (One Cement Five Sand) mix using country bricks of size 9"x4 3/8" x2 3/4" including all cost and conveyance of all materials as per Standard Specification TNDSS NO: 31 & similar to 31C V, VI (S5) VII

Plastering with Cement mortar 1:5 (one cement five sand) mix 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc complete complying with std specification TNDSS No: 56 & 57

Plastering with Cement mortar 1:3 (one cement three sand) mix 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc complete complying with std specification TNDSS No: 56 & 57

Supply, fabrication and fixing of MS door using MS angle and sheet of approved quality with one coat of red oxide primer including cost and conveyance of all materials and labour charges to site etc., and complete

Painting with Two Coats with Weather sealed Exterior emulsion Paint as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. (The Colour and shade of the paint shall be got approved by the departmental officers.)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer 61 V, VI (S4) 3

Charges for conducting Geophysical survey to locate favorable point for drilling borewell point including cost of transformation of machinery and labour charges etc complete complying with standard specification.

Drilling of 6" dia Bore well in hard rock area to any required depth as decided by the Departmental officers including Transportation from one place to anothr place with in Tamilnadu State by direct method using contractor's rig tools at the site shown by the Departmental Officers including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Supply and erection of 180mm dia PVC Casing Pipe of approved quality to require depth including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Supply and delivery of 1.50HP Single phase Submergeble Pumpset as per Is 8034 with Panal Board including all labour charges etc (20 Lpm x 125mHead) TWAD SSRB S.No - 2/17

Supply and Delivery and fixing ofHDPE tank of 1000 litre capasity as per IS1 12701/1996 inculding, unloading, transportation and labour charges for fixing of the GI pipes and Specials for Pipe connection works Inculding cutting,threading and Fixing charges etc., Complete

Supply and delivery of pipes and pipes specials including all charges etc.,Complete

32mm GI Pipes B class

32mm GI coupling (Havey)

32mm GI Bend

32 mm GI union

MS Bore Cover

MS Clamp Set

2.5 Sqmm 3 core Flat cable

20mm GI Pipe B class

20mm GI Elbow

20mm Dia Tank nipple

20mm GI Tea

20x15mm GI reducer coupling

15mm Waste Not Tap

HDPE Pipe 75 mm

Earth work excavation of pipe line trench and depositing on bank with initial lead of 10m & initial lift of 2m in hard stiff clay, black cotton soil, hard red earth shales murram ordinary gravel stony earth and earth mixed with 50% of a fair size boulders and hard gravelly soil including refilling the trenches with excavated earth etc., Complete complying with standard specification.

Supply and fixing of electrical metrials including all charges etc.,Complete

32A - TP MCP isolators

Wooden board

32Ams Fuse carrier

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade on 7/20 GI bearer wire for service connection mains.(PWD Electrical Standard data No.SD. 56).

Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps,pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days