Directorate Of Town Panchayats Tender

Plain Cement Concrete 1:4:8 mix (One Cement, Four Fine Aggregate and Eight Coarse Aggregate) Using 40mm ISS HBG metal for foundation and basement including dewatering if found necessary and including cost and conveyance of all materials to site, and labour charges for mixing, laying and curung etc complete as per standard specification.

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site and labour charges for mixing, laying and curung etc complete as per standard specification.

Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam for 150mm thick specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density,including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers MOST 406

Supplying and laying Precast Designer Paver Block confirming to IS 1568-2006 specification manufacturing and laying standard of M40 grade 63 mm thick (table clauses 5 and 9.14) suitable for bus terminals industrial complexes road on expensive soils etc., including the cost of paver block of size 225mm x 12.50 mm x 80mm and conveyance of materials to work site mentioned in the tender schedule cost of loading and unloading handling during over sand bed of 150mm thick (excluding the cost of sand) conveyance paver block cutter to site and hire charges of vibrators and block cutter operator and labour for leveling the sand to paver block etc., complete ISI 15658-2006.

Manufacturing and Supply, Fixing of the Cement concrete blocks of size 20 x 20 x 15cm in M20 grade Mix and dry packing them in apron or revetments and the cost shall inclusive all materials, conveyance with necessary moulding charges and labour charges etc complete .including Pointing.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

Supply and GI STEEL TUBULAR POLE FOR STREET 4 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 4000mm Length

Supply and Fixing of 48W LED Street Light Fitting with LED Including Cost and Conveyance As Per Standard Specifications.

Supplying and Fixing weld mesh of Size 7.5 cm x 5 cm - 10 Guage and outer frame by 35 x 35 x 5 mm 'L' angle and Diagonal Support by 25 x 5 mm MS Flat Including 32 mm Dia Gi Pipe 'B" Class the rate including cost of cutting and welding charges and Fixing G.I Pipe in the masonry.

Supply and Fixing of Stone Bench with Chair type and fully dressed stone of Size length 1.50 m Breadth,0.45 m Total Height 0.80 m Including Cost and Conveyance of All materials and Labour charges etc., Completed

Supplying and Fixing of Phoenic Tree to a height of 6 Feet including application of pesticides and planting in a position etc.,

Supplying and planting border plants like Duranta /Alamenda/ Mini Lxora at 150 mm c/c in zig-zag manner well grown and maintained in polythene bags at nusery with nesessary manure etc., complete as directed by the engineer incharge..

Supply and Fixing four seater seesaw of size 2.10 meter long and 1.50 'meter width supporting with 35mm dia of C.R. pipe of 'B' class thickness and 4 Nos. of seat arrangements, one safety back rest up and down movement will controlled by heavy duty bearing mounting. Finishedwith out door polyester powder coating with foundation clamps

Supply and Fixing Double swing made of 50mm,63.4mm 'B' class C.R. pipes.Dimensions height 3.048 meter, Length 3.048 meters. Tested bearing supported molded chains with attractive colours. Seating arrangements made by G.I. sheet. Finished with out door polyester powder coating with foundation clamps.

Supply and Fixing of Dust Bin - Chimpanzee,Gorilla,Rabbit Etc,., As Directed by Departmental officers.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification

Providing and laying in position , standardised Concrete Mix M20 Grade in accordance with IS 456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 Kg/M3 and Maximum water cement ratio of 0.55 including admixture (plasticiser/super plasticiser ) in recommended proportions as per IS 9103 as accelerate , retard setting of concrete improve workability without impairing strength and durability with about (5 cu.m ) 7730 kg of 20mm machine crushed stone jelly and with about (3.3 cu.m) 5156 kg of 10-12mm machine crushed stone jelly and about (4.79 cu.m) 7670 kg of sand , but excluding cost of reinforcement grill and fabricating charges centering and shuttering and also including laying vibrating with mechanical vibrators finishing curing etc., and providing fixtures like fan clamps in the RCC floor /roof slabs wherever necessary without claiming extra etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards