Directorate Of Town Panchayats Tender

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Supply, delivery and fixing of CP-PLUS : 4CH NVR ( Support 4 CH IP Camera input up to 6MP Resolution Preview and Playback Max 40MBPS/20MBPS Incoming/Outgoing bandwidth Support 1 SATA HDDS up to 4TB Each, 2 USB Ports (2.0).Support Multibrand network cameras Mobile software ICMOB,GCMOB,CMS Software,KVMS Pro) TWAD 2022-23 , SCH ITEM NO.34A,PAGE NO.226

Supply, delivery and fixing of CC-PLUS:4MP IP Bullet Camera ( 1/3 " 4MP PS CMOS Image Sensor Max 20FPS@4MP , Max 25/30FPS@3MP.H.265 and H.264 Triple-Stream Encoding,WDR(120 DB), Day/Night (1CR),3D-DNR,ROI,AWB,AGC,BLC,HLC,2.8MM Fixed Lens (3.6mm Optional). IR Range of 30 Mtrs,IP67,PDE)

Supply, delivery and fixing of CP PLUS:4 PORT POE with two uplink (6, 10/100MBPS; RJ45 Ports; Max. 30W output of single POE port) TWAD 2022-23 , SCH ITEM NO.33A,PAGE NO.226

Supply, delivery and fixing of 2TB CC TV surveillance Hard disk western digital, self encrypting drive (SED) hardware-based data security and deliver and instannt secure erase feature for safe, fast and easy drive retirement. They meet NIST 800-88 media sanitization specifications. TWAD 2022-23 , SCH ITEM NO.38,PAGE NO.227

Supply, delivery and fixing of Camera Back Box - weather proof DCM enclosure for camera and connectors. (PVC BOX 4X4 FOR CAMERA)

Supply, delivery and fixing of RJ 45 Jack pin (A RJ45 cobbector is a modular 8 Position, 8 Pin connector used for terminating CAT5E or CAT6 Twisted pair cable)

Supply, delivery and fixing of Sintex : Big box ( Sintex FRP junction box, weatherproof for cctv camera and power supply)

Supply, delivery and fixing of Patrol light : RB

Supply, delivery and fixing of ERD: 5A 12V Power supply (input - 100-240V AC 50/60HZ Category - Switch mode power adaptor (SMPS) output type - DC output - 12 Volts 5 Amp)

Supply, delivery and Laying of CAT 6E Cable. (CAT6 UTP Cable supports gigabit Ethernet (1000 base-T) standard. Operates at a bandwidth up to 250 MHZ,This cable well exceeds the requirements of TIA/EIA-568 C.2 Category 6 ISO/IEC class E TWAD 2022-23 , SCH ITEM NO.29,PAGE NO.225

Supply, delivery and Laying of CAT 6E CABLE , cctv camera cable with pipe and other accesories TWAD 2022-23 , SCH ITEM NO.29,PAGE NO.225

Installation, Testing & configuration charges for Camera, & DVR etc., complete

Installation, Testing & configuration charges for NVR Installation (CP-PLUS:4CH NVR -HNVR Installation and Online Configuration)

Supply and fixing of MS Post with foundation of 0.30m dia and 0.60m depth using PCC 1:2:4 concrete etc., complete

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.