Directorate Of Town Panchayats Tender

Design, Supply erection testing and handing over of High Mast structure Bajaj/Philips/ make or equlvalent with required number of continuously tapered hot dip galvanized steel polygonal sides sections with telescopic strip to a total height of 12 meters capable of staning the maximum wind Pressure at the site with single flange base plate secured welded the bottom of the base mast section with vertically movable hot di galvanized lantern carriage and accessories such as electrical junction box brackets for providing & Nos of flood light luminaries with control gear box completed bed fame assembly, Pully drive, stainless steel wire rope single double drum self lubricating winch arrangement suitable for raising and lowering the luminaries camage ring flexible multi core power cable and necessary high tensile hot dipped galvanized foundation bolt & nuts along with washers and anchor plates and templates accessorieds in the Mast a) Design and casting suitable foundation with 1:2:4 mix RCC concrete with 30 cm projection above the ground level with 2 mts depth with necessary for 3 phase 415 V So 12 for rasing and lowering of the lantern carriage complete to operate all fitting mounted in the base to couple with winch-1 set C) Feeder Pillar box comprising 0.90m x 0.45mx1.20m floor Al frame with 63A TPN main switch 1 No 63A fuse unit 3 Nos 63A power contactor with automatic timer arrangements and reversing starter for the 3 phase motor-1 set D) Neon aviation obstruction light (glow world -1 No E) 2 Nos of special al earth electrodes with copper plate 300x300x3mm and copper flat (1"x1/4") inter connection as per ISS complete with earth connection-1 set F) Hot dip galvanized lightening arrestor-1 No G) Flood light luminaries of specially Heavy type water proof dust proof integral luminaries fitting provided with 200 Watts LED light fitting glow world with 20 watts LED Bulb with drives, Alglas coated reflectors with cable connection etc., complete as per standard specification 6 nos

Supply and fixing of brass cable grand for 4x16 Sqmm PVC Armoured LTUG cable with earth connection

Supply and laying of 4x16 sq.mm PVC Armoured LTUG cable in a trench to be excavated at a depth of 0.75mtr putting 0.15mtr layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good (as per site condition)