Directorate Of Town Panchayats Tender

For Supply,Installation,Testing&Commissioning Nowaste Fuel Free Incinerator With Emission Control Device(Model-STNW-100ECD) COMBUSTION CHAMBER-PRIMARY Material: Boiler Grade Steel Plate Thermal Insulation : A) Inner phase:IS:8 Grade Premium Quality Fire Bricks & Ceramic clay B) Outer Phase:With 50mm Thick Glass wool C) Protected With 0.7mm Thick Aluminum Sheet Dimension: Dia 1200mm,Height:1250mm,Thickness 4mm.(Cylindrical part).Upper and Bottom conical area thickness 6mm and 4mm Erection : Erected upon four leegs made of high quality TATA Stel pipe of dia.76mm and thickness 4mm at 600mm from ground level. Other Features: waste loadingdoor,cleaning door,Acss ladder,peep hole,Ash chamber with door. Volume : 1cubic meter/ 35CFT Capacity : per day 1MT/10 Hours Efficiency : 99.3% Fuel Consumption: for Incinrator is Nil For wet scrubber system-Full day Power supply to run a 1HP Pump Dry wet Ratio: 2:1(60% Dry and 40% wet garbage) CHAMBER Secondary burning with the help of additional air inlet tubes Material : MS Pipe Dimension: Dia.458mm,Height:3000mm,Thicknss:10mm Thermal Insulation: Tri-cast ceramic clay Coating,Thickness:50mm EMISSION CONTROL SYSTEM ECD is an air Pollution control devices that are used to remove particulate matter from flue gas. Emission Control Device: wet scrubbing system water consumption: 60 Ltrs/Day CHIMNEY Material : Seamless Carbon Steel Pipe Dimension: Dia.254mm,Thick:8mm Additional Features: 1.Port hole and access ladder for routine maintenance and emission tests 2.Speecially designd diffuseer prevents rain water entering the chamberFountation Footing

Earthwork excavating and depositing on bank with an initial lead of 10m & initial lift of 2m in hard stiff clay, stiff black cotton, hard red earth shales, muram, graverl stoney earth & earth mixed with small size boulders & hard gravelly soil as per S.S 20B as Per Standard Specification.

Plain Cement Concrete 1:4:8 Mix (one part cement, Four part sand and Eight part of aggrigate) using 40mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.as Per Standard Specification.