Directorate Of Town Panchayats Tender

Vibrated Cement Concrete of grade M20 Nominal Mix 1 : 1.5 : 3 ( One part of Cement on point five of sand part of sand three part of aggregates) using ISS size 20mm and below HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost of soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and Exculding form work maintaining of protective bunds, cofferdams, etc., complete as per relevant standard specifications, TNDSS NO: 28 V, VI (S2) V, VI (S5A) VII for Abutment, Pier, Toe wall, Cutoff wall & Retaining wall.

Vibrated Reinforced Cement Concrete of grade M25 design mix using ISS size HBG graded metal including cost and conveyance of all materials to site including cost of cement at site including cost soft water, labour charges for mixing, transporting, laying and curing concrete , working at depths , tools and plants and Exculding form work including all other incidental charges etc; complete as per relevant standard specifications, for DIRT WALL CUM BED BLOCK OVER ABUTMENTS AND BED BLOCK OVER PIERS, Approach Slab and Deck Slab 30 V, VI (S5) VII & 13.

Supplying and erecting centering for Sides and Soffits including necessary supports and strutting up to 3.29mt height for plane surfaces as detailed below in all floors with all cross bracings using mild steel sheets of size 90mm x60mm and 10BG stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by Casuarina props of 10cm to 13cm dia supported at not more than 75cm centre to centre etc. complete Complying with standard Specification without Strutting. (TNSS NO or NBC No 30(S) 86 86 A V, VI(S3) VII for Abutments, Wing walls, Pier, Deck Slab, Approach Slab etc.

Supplying ribbed tor steel rods including cutting cranking fabricating assembling laying in exact position tying with soft steel wire 16 or 18 BWG etc. complete for all RCC Works. as per the design given including cost of steel and binding wire also in all floors as per standard specification. SS86 & 86A, V, VI (S3) (S6) VII.

Providing filter media behind the abutments and wings with clean III graded material 53mm to 5.6mm to 600mm thick and well compacted in layers with smaller sized towards the soil and bigger size towards the wall including cost and conveyance to work site including all labors and other incidental charges including hire charges for tools and plants employed etc., for filter media as per MOST's (Roads Wing) specifications for Roads and Bridges " Fourth Revision Cl. 309-3-2-13 and 305 -4-4 etc., complete.

Vibrated cement Concrete M30 design mix using ISS size HBG graded metal including cost and conveyance of all materials to worksite and cement at site including all labour charges for fixing concrete, laying, vibrating, hire charges for tools and plants, compacting, curing with all leads for soft water, including all other incidental charges, Exculding form work, cost of pre-moulded expansion joints and fixing the same in position etc., complete for wearing coat of 75mm uniform thickness over deck slab and approach slab. TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Vibrated Cement Concrete M20 grade, Nominal Mix using 20mm ISS size hard granite broken metal including cost and conveyance of all materials to site and cement at site including labour charges for mixing, transporting, laying, and curing concrete, working at heights, hire charges for tools and plants, including all other incidental charges,etc.,complete as per standard specification for PCC PARAPETS OVER WINGS.TNDSS NO: 28 V, VI (S2) V,VI (S5A) VII

Supply and fixing of PVC pipes of 90mm dia. 6 KFS Including cost and conveyance of pipes to the site and fixing in position to proper grade and level, including labour charges for fixing and including all other incidental charges etc. complete.

Providing and fixing Kraft paper or tarred felt of specified thickness bearing for full width of deck slab and for full width of bearing including cost and conveyance of work site labour for fixing the incorrect position and all other incidental charges etc. complete.

Providing and fixing 300mm wide PVC EXPANSION JOINT in 20mm expansion gap provided in between decks over pipes and in between deck and dirt all over abutment as shown in the drawings including cost and conveyance of expansion joints including Shalimar pad and joint sealant etc., complete.

Granite rough stone dry packing 300 mm thick for revetment and apron using good size granite rough stone properly wed with quarry spells including cost and conveyance of all materials to site labour charges for packing the same in position and all often incidental charges etc. complete for revetment.

Construction of Granular Sub-base by providing close graded material, mixing in a mechanical plant at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, Complete as per clause 401.

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well-prepared surface and compacting with vibratory roller to achieve the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH

Providing and laying Prime Coat over WBM/ WMM Surface using 7Kg of Emulsion Bitumen (SSI) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5

Providing and laying Tack Coat over WBM/ WMM Surface (treated with primer) using 2.50 Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it, including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5

Providing and laying 50mm Consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50 – 13.20 mm Graded metal and 0.25 cum of 13.20 – 2.36 mm Grade metal and 0.23 cum of 2.36 mm & below with 53.20 kgs of 60/70 Grade Bulk bitumen for premixing per 10 Sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50 mm with mechanical pavers to the specified grades and cross sections and compaction by Vibratory/Pneumatic rollers to the required density etc., including labour for loading bitumen into bitumen tank and Metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20 – 30 ton CMP With bitumen boiler tipper, trucks, paver Finisher/9M, Vibrator rollers and all other tools and plants required, including all other incidental charges etc., complete as per standard specification using CMP Clause 505 of MORTH Rev-5

Providing and laying Bituminous Concrete 30mm Consolidated thick using 0.13 cum of 19.00 – 9.50mm,0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 mm & below with 45.27 kgs of 60/70 Grade Bulk bitumen & 5.03Kgs of Shredded Plastic (10%) for premixing per 10 Sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20 – 30 ton capacity, Conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40 mm with mechanical pavers to the specified grades and cross sections and compaction by Vibratory/Pneumatic rollers to the required density etc., including labour for loading bitumen into bitumen tank and Metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20 – 30 ton CMP With bitumen boiler tipper, trucks, paver Finisher/9M, Vibrator rollers and all other tools and plants required, including all other incidental charges etc., complete as per standard specification using CMP Clause 507 of MORTH Rev-5

Road marking with Hot applied Thermoplastic compound with Reflectorizing Glass beads on Bituminous Surface, Providing and laying of hot applied thermoplastic compound 2.5 mm. thick including reflectorizing glass beads @ 250 gms. per sqm. area, thickness of 2.5 mm. is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level, uniform and free from streaks and holes etc. complete. (as per MORT & H specification No.803).

Random rubble masonry in cement motor 1:5 (one Part of cement, Five part of Crushed Stone Sand (M- Sand)) mix using all granite stones and bond stones for foundation and basement from approved quarry including watering, curing, and labour charges etc., completed as per standard specification

Providing and Laying cement concrete pipe NP3 forculvertfirst classbeddingofgranular material including fixing collar with cement mortar 1:2but excluding excavation, protection works back filling concrete and masonry works in head wall and parapets.