Directorate Of Town Panchayats Tender

providing and Laying Tack Coad 2 kg /10 sqm Surface using of emulsion Bitumen for 10 m² and cost of Emulsim Bitumen which will be supplied and procured by the contractor himself at his own cost as per Special condition appended including labour charges. for preparing the surface for laying the tack coat and for applying the required quantity of bituminons by mechanical sprayer including hire and the fuel for all tools and plants employed etc completed. MURTH Specifications 111, 112,501, 503 & 900.

Providing and laying Tack coat 2.50 Kg/10 m² over Wet Mix Macadam surface using of RS1 Emulsion Bitumen for 10 m² and cost of Emulsion Bitumen which will be supplied and procured by the contractor himself at his own cost as per special condition appended including labour charges for preparing the surface for laying the tack coat and for applying the required quantity of bituminous by mechanical sprayer including hire and fuel for all tools and plants employed etc complete MORTH Specifications 111,112,501,503 & 900.

Providing and laying 50 mm consolidated thick Dense Bituminous Macadam using 0.24 m³ of 26.50 - 13.20 mm, 0.25 m³ of 13.20-2.36 mm and 0.23 m³ of 2.36 mm & below and with 53.20 Kgs of VG30/VG40 bitumen for premixing per 10 m² including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc, including labour for attending to paver at site etc, including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver Finisher/9m paver finisher, Vibratory/ Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc complete. using CMP Clause 505 MORTH Rev-5.

Road marking with hot thermoplastic compound with reflectorising glass beads on bituminous surferce providing and Laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250 Gms/m² area thickness of 2.5mm exclnsive of surferce applied glass beads en per IRC: 35. The finished surface to be level uniform on of free from streaks and holes on per MORT @ H Specification No.803

Supply and filling of well gravel filling approved quarry including cost and Conveyance of all matericals to site and all Labour charges for filling etc. Complete.

Providing and laying Bituminous Concrete 30-40 mm thick using 0.13 m³ of 19.00-9.50 mm, 0.17 m of 9.50-2.36 mm and 0.26 m³ of 2.36 and below with 50.30 Kgs of VG 30/VG 40 bitumen for premixing per 10 m² including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40 mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc, including labour for attending to paver to site etc, including hire charges and fuel charges for 20-30 ton CMP with bitumen boiler, tipper trucks, Paver Finisher / 6 m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc complete. using CMP Clause 507 of MORTH Rev-5.