Directorate Of Town Panchayats Tender

Reinforced cement concrete 1:1.5 :3 mix (one cement One and half sand and three Coarse aggregate) using 20mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., to complete as per std., specification.1.5m to 4.5m below G.L.

0 m to 1.50m below G.L.

0m to 4.5m from G.L.

4.5m to 7.32m from GL

7.33m to 10.98m from GL

10.98m to 14.64m from GL

Supplying and erecting centering for sides and soffits including supports and strutting up to 3.00m height for plane surface such as RCC Slab, Rectangular Beams, Tee (or) ELL Beams, Lintel Bed Block, Slabs, Landing Slabs, Beams Canopy, Side Slab (or) Square (or) Round columns etc., as detailed below with all cross branching using M.S. Sheets of size 80cm x 60cm and B.G. 10 stiffened with welded M.S. Angles of size 25 x 25 x 3mm for boarding laid over silver oak or country wood joints of 10cm to 30cm to dia spaced at 75cm c/c etc., complete complying with standard specifications as directed by departmental officers etc., complete.PLANE SURFACE Below G.L.

G.L. to 3.30m

5.31 to 6.30 m

8.31 to 9.30 m

CURVED SURFACE 0 to 3.30 m

8.31 to 9.30 m

SQUARE COLUMN Below G.L.

0 to 3.30m

3.31 to 4.30 m

4.31 to 5.30 m

5.31 to 6.30 m

6.31 to 7.30 m

7.31 to 8.30 m

Painting two coats ready mixed Approved Exterior Emulsion of first quality and of approved colour over a primingcoat including through scarbing clan removel ofone coat of priming with best Cement paint as directed by the department officers etc complete and including necessary plaster of paris whever regd.(S.l.No.358) -10sqm complete. as per std., specifications.

Supply and fabrication and placing in position of TMT steel rods to required size and length as directed by the departmental officers including cost of binding wire, cutting, bending and tying with proper position etc., including cost and conveyance of all materials to site and all labour charges etc., complete Complying with Standard Specification as per TNDSS No.97 V,VI (S6) VII (S6) VII-3,

Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers.

Providing and fixing of Reinforced Cement Concrete inner access Ladder in Reinforced Cement concrete 1:1.5:3 (One cement, one and half Sand and three aggregate) using 20mm HBG stone for OHT including cost of reinforcement, placing gril in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 45cmm consisting of two Nos. of vertical post of 10cm x 15cm and step slab 25mmx25mm etc., complete and as directed by departmental officers.

Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.63mm Hdpe Pipe

Refilling with excavated soil (other than sand) complying with the standard specification for filling in Pipe Line Trenches

Supplying and fixing in position of the following PVC and G.I specials best approved quality conforming to ISS and providing leak proof joint with PVC adhesive etc., complete complying with standard specification.50mm GI Pipe B Class

80mm GI Pipe

110mm PVC Pipe

75mm 6KSC PVC

63mm Hdpe Pipe