Directorate Of Town Panchayats Tender

Supplying , errecting and Centering for Side and Soffiots including necessary supports for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90x60cm & 10 gauge stiffened, welded with steel angle of size 25x25x3mm for boarding laid over silver oak joists (Country wood) of size 10x6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 -13cm dia.spaced @ 75cm c/c etc., complete complying with standard specifications for Side wall etc., Complete. Mat and Grade Beam

Column

Supplying and Fabrication of Steel and placing in position MS / Ribbed tor steel grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc., Complete complying with standard specification in force per Kilogram.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

A)  Brick Work in Cement Mortor 1:5 Mix (one cement, five M- Sand ) using new best country Bricks of size 8 ¾” x 4 ¼” x 2 ¾” from approved quarry including cost and conveyance of all materials to site. loading and unloading charges and labour charges for mixing, laying and curing etc. complete. complying with std. specifications.

Supply and Filling of Gravel from an approved Quarry including cost and conveyance of red gravel and labour charges for loading, unloading, filling, leveling, consolidate by water etc., complete as per standard specification.

Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three M-sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Plastering in C.M. 1 : 5 (one cement, five sand) to 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Plastering in Cement Mortar 1:3 Mix (one Cement, Three M-sand ) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications

Solid PVCDoor Shutters using 19Gauge 19mmMS square tubes for stylesandouter frames. 15mmMS squaretubes for top, lockandbottomrails. Thesteel tubes shall be covered with 5mm thick solid PVC Sheets. Shutterusing5mmthicksolidPVCSheetsfor panelling shall rigidly fixed in position including necessary furnitureand fittings. Theover all sizeof stylesshallbe50mmx30mm. Theoverallsizeoftop rail, lockrail andbottomrail shallbe75mmx30mm. Theoverallsizeofframesshallbe50mmx45mmwith suitable rabate for housing the shutter ( Solid panel PVC door with frame)

Supplying and fixing of M.S.Grill Gate of approved design using necessary mild steel flats for inner and outer members which should be fixed to Gate frames inclusive of priming coat of best approved quality red oxide primer etc., complete complying with standard specifications.

Supplying and fixing over the floors best quality of Scratch Ceramic Tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.,

Supply and fixing in position 22" Indian type water closet with foot reset includes "P" (or) "S" trap including cost and conveyance of all materials to site and all labour charges etc., to complete as per std.,specifications.

Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Supplying and fixing in position best Indian make white glazed earthenware WASH HAND BASIN of 560x406mm with a a pair of C.I. Brackets, 15mm dia C.P. Pillar tap, 32mm G.I. Waster water pipe, 32mm dia C.P. Brass waster coupling, plug with chain, 15mm dia PVC connection, 15mm G.M. wheel valve with ISI mark and necessary G.I. union and G.I. Elbow, including fixing wash hand basin in position with white lead, clamps, teakwood plugs, screws, rubber washer etc., complete without any leakage complying with standard specifications.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality etc., complete

Wiring with 2x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade insuitable heavy gauge MSconduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14SWG TC wire for light point / fan point (for electronic regulator) SD-24

WaterTightBulkHeadFittingsuitablefor100/60WattsLamp with Guard Heavy Type

Supply and Run of 4 x 4 sq.mm(56/0.3) PVC insulated Sc unsheathed Cu.Conductor of 1100V grade in 25mm dia G.I pipe ("B"class) suitable bend at both ends with necessary angle iron up right and end supports for mains.SD-72

Supply and fixng of TNEB meter board suitable for 3phase 63A service connection made up of suitable angle iron frame work of size 2 feetx1-1/2 feet using angle iron of size1-1/2"x1-1/2"x1/4" rigidly fixed on wall covered with hylem sheet of size 2feet x 1/2feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos.63A fuse units (500V),1No.neutral link,copper earth flat of size1"x1/4"with inter connection of EB meter to fuse units by7/16 PVC insulated copper wire with earth connection complete SD-129

Supply and fixing of 1000 ltr Capacity HDPE Tank including cost of all materials to site and all labour charges (WD-M1418 Page 87 SOR 2024-25 Volume 1)

Supply and delivery of following PVC and GI Pipes and Other materials of good quality including cost of materials and labour with cost for coveyence to site etc Complete complying with standard Specifications. 20mm dia PVC Pipe wc (M-0876 Page 146 SOR 2024-25 Volume 1)

40mm dia PVC Pipe (M-0878 Page 147 SOR 2024-25 Volume 1)

20mm dia PVC TEE (M-0899 Page 148 SOR 2024-25 Volume 1)

20mm dia PVC Elbow (M-1117 Page 158 SOR 2024-25 Volume 1)

20mm dia PVC Tap (M-0510 Page 87 SOR 2024-25 Volume 1)

40mm pvc Elbow (M-0890 Page 147 SOR 2024-25 Volume 1)

40mm PVC TEE (M-0902 Page 148 SOR 2024-25 Volume 1)

40mm- 20mm PVC Reducer

40mm ball valve (MW-M0228 Page 233 SOR 2024-25 Volume 2)

110mm dia PVC Pipe (M-0865 Page 146 SOR 2024-25 Volume 1)

110mm dia PVC TEE (M-0949 Page 150 SOR 2024-25 Volume 1)

110mm dia PVC Elbow Door type (M-0945 Page 150 SOR 2024-25 Volume 1)

110mm dia PVC end cap (M-1050 Page 155 SOR 2024-25 Volume 1)

75mm dia PVC Pipe (M-0862 Page 146 SOR 2024-25 Volume 1)

75mm dia PVC Elbow (M-0939 Page 150 SOR 2024-25 Volume 1)

75mm dia PVC TEE (M-0947 Page 150 SOR 2024-25 Volume 1)

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Supplying and fixing best approved quality Brass C.P anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.