Directorate Of Town Panchayats Tender

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2007 of rubberized interlocking paver block in size of minimum compressive strength of 40N mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 100mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,

Plastering in C.M. 1 : 5 to 12 mm thick including all cost and conveyance of all materials to site including cost of cement which will be purchared locally by the contractor and conveyance of the same to the actual work site and cost form work including watering curing and all leads of good potable water and all other.

Providing UPVC (Un-Plasticized Polyvinyl Chlodide) Door : Providing and fixing casement doors fabricated from un-plasticized polyvinyl choloride (UPVC) chamber system which provides hig insulation properties with outer frame 60mmx 55mm with an outer wall thickness of 2.4mm. The window unit shoulddesigned with all corner joints mitred and fusion welded. Windows Should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1 mm to have dimensional stability. The sash should be of 60 x 74 mm. The profiles should have co-exturded scals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside . Glazing: The window system should be glazed with 5mm plain float glass/ 6mm bison lam Installation : The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system shoud be fixed directly to the plastered brick wall using self expanding nylon plug and driving mselectoplated screws into plug

Door

Supplying and fixing in position of size Western type Water closet (10 lit Capacity) of approved quality with S or P trap including fixing the same in position etc., completed.

Supplying and fixing in position of Urinals with Necessary Accessories including cost and conveyance of all materials and labours charges etc., as per standard specification (For Ladies)

Colour washing two coats using emlusion over one coat of primer including cost and conveyance of all materials and labours charges etc., as per standard specification

Painting two coats with best-approved quality Colour Enamel paint for New Iron Works including cost and conveyance of enamel paint etc., Complete.

Dadooing the walls from the floor level with white glazed tiles of 300mm x 200mm x 6mm of best and approved quality set in cement mortar 1:2 mix (one cement and two sand) 12mm thick and pointing with white cement neatly as directed Complying with standard specifications

Supply and Delivery of 2.00 H.P. Submergible Motor with pump set. 20X125 (LPMXHEAD)

Supplying and Delivery of 2.5 Sq.mm Submersible water proof cable.

Supplying and Delivery Suitable Panel board for the submersible consist of ammeter, voltmeter pilot lamp bi-metal relay contact kit complete wire and fixed in metal box with lock and Key.

Labour Charges for Erection of 2 HP Supmersible Pump Set with all accessories.

Supply and Laying of 1000Lits capacity HDPE Tank with approved Quality Including all cost and conveyance etc.

Supply and delivery of Flowing GI Pipes and specials

32mm UPVC pipe

20mm GI Coupling

20mm GI Elbow

20mm GI Tee

20mm GI Union

15mm GI Tap

20mm Gate Valve

32mm GI Coupling

32mm Gate Valve

32mm Elbow

32mmx20mm Reducer

Supply and fixing of Incinerator for Ladies as per PWD SDR

Supply and Fixing wash Basin with Mirror (550 x 400 mm)

Wiring with 2X2.5sq.mm PVC unsealed sc cooper cable 650vgrated suitable with PVC pipe open light point

Supply and fixing of bulk head fittingg including all cost and conveyance etc., complete

Supply and fixing of Street light fitting including all cost and conveyance etc., complete

Providing floor fining ceramic tillss size 305x305x6mm thick including all cost and conveyance etc., complete

Supply and fixing SS Steel Hand rails including all cost and conveyance etc., complete