Directorate Of Town Panchayats Tender
... More
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Directorate Of Town Panchayats Tender
Civil And Construction
Water Storage And Supply
Eprocure
Opening Date14 Aug 2024
Closing Date20 Aug 2024
Tender Amount₹ 11,77,00,000
Costs
EMD
₹ 11,77,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
2024-25 Knmt Improvements Of Water Supply System To Pothanur Town Panchayat
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_DTP_473108_1Bid Award Id
ViewTender No
Roc 124-2024Tender Authority
Directorate Of Town Panchayats ViewPurchaser Address
-Website
http://https://www.tn.gov.in/dtp/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Reinforced Cement Concrete using M30 Design mix with required cement, sand and 20 mm and 10 mm Machine crushed HBG stone including the cost of all materials, labour charges, mixing by using mechanical mixer machine, placing in position, lifting, vibrating by using mechanical vibrator, finishing & curing but excluding the cost of reinforcement and fabricating, centering, shuttering and strutting charges etc, complete. From upto 1.5 mt Below GL
32.5
-
-
... More
From 1.5 to 4.5 mt Below GL
178.11
-
-
... More
From 4.5 to 9.00 mt below GL
93.98
-
-
... More
From 0.0 to 4.5 mt Above GL
146.39
-
-
... More
From 4.50m to 7.32m ht. Above GL
546.93
-
-
... More
From 7.32m to 10.98m ht.Above GL
44.96
-
-
... More
From 10.98m to 14.64m ht.Above GL
44.96
-
-
... More
From 14.64m ht., to 18.30m ht.Above GL
217.02
-
-
... More
From 18.30 m to 21.96m ht. Above GL
68.03
-
-
... More
Sinking of infiltration well of 4.50m internal dia and 5.5m external dia below water level including ali incidental charges in light or sandy soil. 1st Depth of 2m
6
-
-
... More
2nd Depth of 2m
6
-
-
... More
3rd Depth of 2m
6
-
-
... More
4th Depth of 2m
6
-
-
... More
5th Depth of 2m
1.8
-
-
... More
Porous concrete in CC 1:4 (One cement and four hard broken granite jelly of a size 20mm) for steining of infiltration well excluding cost of centering but including curing etc., complete and as directed by the Engineers @ well curb including all labour charges etc, complete.
145.45
-
-
... More
Providing steel centering & shuttering with necessary strutting arrangements of sides and soffits for all RCC or PCC items including cost and conveyance of materials as directed by the Engineers @ well curb including all labour charges etc, complete. Plane Surface Upto 3.30m ht., below GL
936.57
-
-
... More
From 3.30 - 4.30M above GL
229.72
-
-
... More
7.30 - 8.30M above GL
229.72
-
-
... More
10.30 - 11.30M above GL
229.72
-
-
... More
15.30 - 16.30M above GL
458.58
-
-
... More
From 3..3m to 4.3 m from floor slab
316.38
-
-
... More
Square column upto 3.30m ht. Below GL
70.4
-
-
... More
upto 3.30m ht.
168.96
-
-
... More
From 3.30m to 4.30m ht.
51.2
-
-
... More
4.30 m to 5.30 m height
51.2
-
-
... More
5.30 m to 6.30 m height
51.2
-
-
... More
6.30 m to 7.30 m height
51.2
-
-
... More
7.30 m to 8.30 m height
51.2
-
-
... More
8.30 m to 9.30 m height
51.2
-
-
... More
9.30 m to 10.30 m height
51.2
-
-
... More
10.30 m to 11.30 m height
51.2
-
-
... More
11.30 m to 12.30 m height
51.2
-
-
... More
12.30 m to 13.30 m height
51.2
-
-
... More
13.30 m to 14.30 m height
51.2
-
-
... More
14.30 m to 15.30 m height
42.24
-
-
... More
Circle column upto 3.30m ht. Below GL
400.59
-
-
... More
Circle column upto 3.30m ht.
9.33
-
-
... More
Circle column From 3.30m to 4.30m ht.,
50.96
-
-
... More
Circle column From 4.30m to 5.30m ht.,
2.83
-
-
... More
From 5.30m to 6.30m ht.,
2.83
-
-
... More
From 6.30m to 7.30m ht.,
2.83
-
-
... More
From 7.30m to 8.30m ht.,
2.83
-
-
... More
From 8.30m ht., to 9.30m ht.,
2.83
-
-
... More
From 9.30m ht. to 10.30m ht.
2.83
-
-
... More
From 10.30m ht. to 11.30m ht.
2.83
-
-
... More
From 11.30m ht., to 12.30m ht.,
2.83
-
-
... More
From 12.30m ht., to 13.30m ht.,
2.83
-
-
... More
From 13.30m ht., to 14.30m ht.,
2.83
-
-
... More
From 14.30m ht., to 15.30m ht.,
2.54
-
-
... More
curved surface upto 3.30m ht. Below GL
574.66
-
-
... More
curved surface 14.30 - 15.30M above GL
61.05
-
-
... More
curved surface 15.30 - 16.30M above GL
209.9
-
-
... More
curved surface From 0m to 3.3 m from floor slab
533.15
-
-
... More
curved surface From.3m to 4.3 m from floor slab
57.58
-
-
... More
Supply, fabrication and placing in position of Steel, including Cutting, Bending & Therading including cost and conveyance of materials as directed by the Engineers @ well curb including all labour charges etc, complete.
165584.73
-
-
... More
Plastering with cm 1:3 (One Cement and three Sand) mix, 12mm thick including all cost and conveyance of materials to site and all Labour charges etc, complete.
127.17
-
-
... More
Plastering in Cement Mortor 1:5 Mix (one Cement, five M- Sand) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.
150.13
-
-
... More
Supply delivery and fixing in position of CI man hole cover with frame of 60cm x 60cm x with locking arrangement etc., complete and as directed by departmental officers.
6
-
-
... More
Supply delivery and fixing of PVC Mould CI steps in position at 30cm centre to centre in staggered manner and as directed by departmental officers.
63
-
-
... More
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
3680.37
-
-
... More
Labour for filling the coarse sand passingthrough a sieve of 10 meshes to 2.5 cm andretained in 20 meshes to 2.5 cm well washed and cleaned to be free from impurities including stacking.Plugging the bottom of the well with coarse sand of approved sizes and grade as directed by the department engineers.
32.07
-
-
... More
Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size100mmx60mm with a rebate of 30/ 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., MS Hand rail
10250
-
-
... More
Diversion of river water by using sand bags if necessary.
306
-
-
... More
Supplying and filling in foundation and basement with filling m sand in layers of not more than 15cm.thick well rammed watered and compacted -1Cu.m etc., complete complying with standard specification.
15.96
-
-
... More
Plain Cement concrete 1:4:8 (one cement, four sand and eight course aggregate of 40mm size hard blue granite broken stone) for levelling course for foundation including the cost of mixing, placing the concrete in position, consolidating, finishing etc. complete.
774.58
-
-
... More
Supplying and fixing in position of RCC (1:1.5:3) inside access ladder of 3.57m length using 20mm size HBS jelly including cost of all materials, centring, shuttering,strutting, fabrication and placing in position of reinforcement, finishing, curing etc. complete and as directed by Department Engineer.
4
-
-
... More
Construction of RCC spiral staircase in RCC 1:1.5:3 (1 Cement : 1.5 Sand : 3 Coarse Aggregate) using 20 mm HBGS of 1.80 m diameter of required height for approach to the roof of Service Reservoir with RCC Handrails including earthwork excavation, providing CC 1:4:8 mix, RCC footing 1:1.5:3 mix, GL platform etc., and also including cost of steel reinforcement, fabrication charges, scaffolding, centering, precasting charges, cement, painting etc. complete as per standard specifications and as directed by Engineer. The staircase shall be braced to the column of service reservoir at suitable interval. (in the BOQ, quantity column the exact height to be mentioned from GL to roof slab bottom to get total value of work to be done.
2
-
-
... More
Supplying and fixing of RCC 1:1.5:3 (1 Cement : 1.5 Sand : 3 Coarse Aggregate) using 20 mm HBGS for RCC Handrails of 0.91 m height over the top of roof slab of approved pattern and design including the cost of reinforcement, centering, precasting, finishing etc complete
72.26
-
-
... More
Fiber Reinforced Concrete frane aand Covers As per IS 12592/2002 ,Part 1 & 2 Supply and installation of 600mm dia FRC manhole cover to suit 600 mm clear opening manhole frame (extra heavy duty)
4
-
-
... More
Providing and fixing of RCC Ventilator 1:1.5:3 (one cement, one and half sand and three course aggregate of 20mm size hard blue granite broken stone) for ventilators of approved pattern including cost of cement, reinforcement, centering, shuttering, strutting etc., complete - 0.30m dia
8
-
-
... More
Refilling the foundation with excavated Soil (other than sand) in layers of not more than 15cm thick, watering, well ramming, consolidating, complying with standard specification and as directed by TWAD Board Officers.
640.84
-
-
... More
Supplyong of Ductile Iron class PN - 10 flanged pipes as per IS 8329/2000 (each double flanged pipe length shall be 2.0m) For Inlet 250mm dia
56
-
-
... More
For outlet 300mm dia
16
-
-
... More
Supply and delivery of the following dia of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron ofGrade GGG 40 or equivalent grade,Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 ORing protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163-89/ISI 4846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application withpressure rating PN 10/16. For DI 250mm dia Valve
4
-
-
... More
For DI 300mm dia Valve
2
-
-
... More
Supply & delivery of following DUCTILE IRON SPECIALS AS PER IS 9523/2000 for valve for OHT as per IS standards Flanged spigot (tail pcs) specials for 250mm dia Valves (Such as Inlet,scour & over flow)
384
-
-
... More
Supply & delivery of following DUCTILE IRON SPECIALS AS PER IS 9523/2000 for valve for OHT as per IS standards -Flanged spigot (tail pcs) specials for 300mm dia outlet Valves
172
-
-
... More
Specials for installation of double flanged pipes DI 250mm dia Duck foot D/F bend
456
-
-
... More
Specials for installation of double flanged pipes DI 300mm dia Duck foot D/F bend
210
-
-
... More
Specials for installation of double flanged pipes DI 250mm dia flanged socket
162
-
-
... More
Specials for installation of double flanged pipes DI 300mm dia flanged socket
72
-
-
... More
Specials for installation of double flanged pipes DI 250mm dia 90 degree D/F bend
588
-
-
... More
Specials for installation of double flanged pipes DI 300mm dia D/F 90 degree bend
136
-
-
... More
Providing pipe connection by lifting pipes and specials in vertical direction and placing the same for required alignment including lifting the pipes and specials in various heights of inlet, outlet, overflow and scour including earthwork excavation conveying the pipe and specials into the trenches, laying to proper grade and alignment cutting, threading and jointing with jointing materials with required specification including labour charges and supply of valves pipes, specials MS Clamps to fix the pipes with the columns including all taxes duties and connected charges etc. complete and taxes duties and connected charges etc. complete and as directed by Engineer incharge. Vertical laying up to 2m ht. from G.L.
14
-
-
... More
Vertical laying from 2m to 4m.
14
-
-
... More
Vertical laying from 4m to 6m
14
-
-
... More
Vertical laying from 6m to 8m
14
-
-
... More
Vertical laying from 8m to 10m
14
-
-
... More
Vertical laying from 10m to 12
14
-
-
... More
Vertical laying12,m 14m
14
-
-
... More
Vertical laying14m 16m
14
-
-
... More
Vertical laying16m 18m
6
-
-
... More
Vertical laying18m 19.5 m
6
-
-
... More
Construction of Brick work valve Chamber with M20 Grade concrete . The rate should include earth work excavation in various soils met with at the site of work, refilling the pit after the construction of the pit, PCC M10 for Blinding Concrete, Brick work in CM 1:5 and plastering with CM 1:5 - 12mm thick, cost of steel reinforcement fabrication charges, Cover slab with manhole cover etc., and fixing the valves in position inside the pit including laying, jointing of valves, HDPE pipes and specials including the cost of jointing materials such as bolts and nuts RI sheets washers etc., complete and as directed by the Departmental Engineer
6
-
-
... More
Labour charges for Painting Board Emblem in accordance with the size and specifications as approved by the Board on the Service Reservoirs including cost ofall consumables, one coat of base paint, scaffolding charges including painting NRDWP Logo on the Service Reservoirs., complete and as directed by department engineers.
16
-
-
... More
Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers - Hard stiff clay, stiff black cotton, hard red earth, shales,murram gravel, stoney earth and earth mixed with smallsize boulders and hard gravelly soil.SS20B Pumping Main 150 MM Dia DI K7
940
-
-
... More
200 MM Dia DI K7
1618
-
-
... More
300 MM Dia DI K7
750
-
-
... More
Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers - Hard stiff clay, stiff black cotton, hard red earth, shales,murram gravel, stoney earth and earth mixed with smallsize boulders and hard gravelly soil.SS20B Distribution System 90 mm HDPE PE100PN6
2685
-
-
... More
110 mm HDPE PE100PN6
3189
-
-
... More
125 mm HDPE PE100PN6
1359
-
-
... More
140 mm HDPE PE100PN6
1858
-
-
... More
160 mm HDPE PE100PN6
1111
-
-
... More
180 mm HDPE PE100PN6
1287
-
-
... More
200 mm HDPE PE100PN6
1379
-
-
... More
225 mm HDPE PE100PN6
85
-
-
... More
250 mm HDPE PE100PN6
54
-
-
... More
Labour for cutting open road for laying water mains orsewer Distribution System BT Cutting
702.38
-
-
... More
Labour for cutting open road for laying water mains orsewer Distribution System CC Cutting
468.25
-
-
... More
Supply and Delivery DUCTILE IRON SOCKET/SPIGOT PIPES FOR CLASS K7 AS PER IS 8329/2000 (Connecting main laying on Foot Bridge) Pumping Main 100mm diameter
180
-
-
... More
150mm diameter
1655
-
-
... More
200mm diameter
1773
-
-
... More
300mm diameter
750
-
-
... More
Supply & delivery of following sizes of HDPE PIPES confirming to IS 4984/2016 Distribution System 90 mm HDPE PE100PN6
2685
-
-
... More
110 mm HDPE PE100PN6
3189
-
-
... More
125 mm HDPE PE100PN6
1359
-
-
... More
140 mm HDPE PE100PN6
1858
-
-
... More
160 mm HDPE PE100PN6
1111
-
-
... More
180 mm HDPE PE100PN6
1287
-
-
... More
200 mm HDPE PE100PN6
1379
-
-
... More
225 mm HDPE PE100PN6
85
-
-
... More
250 mm HDPE PE100PN6
54
-
-
... More
Supply and Delivery DUCTILE IRON SPECIALS AS PER IS 9523/2000 Pumping main 150mm - 90 Deg D/S Bend
80
-
-
... More
150mm - 45 Deg D/S Bend
128
-
-
... More
150mm - 22 1/2 Deg D/S Bend
238
-
-
... More
200mm - 90 Deg D/S Bend
64
-
-
... More
200mm - 45 Deg D/S Bend
78
-
-
... More
200mm - 22 1/2 Deg D/S Bend
132
-
-
... More
300mm - 90 Deg D/S Bend
130
-
-
... More
300mm - 45 Deg D/S Bend
196
-
-
... More
300mm - 22 1/2 Deg D/S Bend
328
-
-
... More
Supply, Delivery and fixing of DI D/F Gate valves (Soft Seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro' body passage, inside and outside color Blue including Flange/socket and Flange/spicot tail pieces, etc., loading,unloading, Transportation charges and stacking etc. complete as per specifications. All the valves are to be compatible for burried application with pressure rating PN 10/16. Pumping Main & Distribution System 80mm sluice valve
38
-
-
... More
Pumping Main & Distribution System 100mm sluice valve
11
-
-
... More
Pumping Main & Distribution System 150mm sluice valve
9
-
-
... More
Pumping Main & Distribution System 200mm sluice valve
7
-
-
... More
Supply, Delivery and fixing of DI D/F Gate valves (Soft Seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro' body passage, inside and outside color Blue including Flange/socket and Flange/spicot tail pieces, etc., loading,unloading, Transportation charges and stacking etc. complete as per specifications. All the valves are to be compatible for burried application with pressure rating PN 10/16 Distribution System 250mm sluice valve
3
-
-
... More
Supply, Delivery and fixing of DI D/F Gate valves (Soft Seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade GGG40 or equivalent grade, wedge fully rubber lined with EPDM, replaceable spindle nut, without gland packing and with 3 O-Ring protection on the shaft and seals of NBR and the valves should be of vaccum tight and 100% leak proof with face to face dimentions as CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING All the valves should be with electrostatic powder coating both inside and outside with pocket less straight thro' body passage, inside and outside color Blue including Flange/socket and Flange/spicot tail pieces, etc., loading,unloading, Transportation charges and stacking etc. complete as per specifications. All the valves are to be compatible for burried application with pressure rating PN 10/16 Pumping main 300mm Sluice valve
2
-
-
... More
Manufacture, Supply and Delivery of Tamper proof C.I. DOUBLE AIR VALVE AS PER ISI 14845/2000 with pressure range from PN 1.0 to 2.5 with body and cover made of Ductile Iron of Grade GGG 40 or equivalent grade conforming to IS 1865 with Food Grade Epoxy Powder coating(EP-P) inside and for outside of colour blue RAL 5005. All internal parts such as float, shell etc., cover bolts, made of Austenitic alloy steel of SS AISI 304/316. The float shall be made of Polytetrafluroethylene/ Austenitic alloy steel of AISI 304/316. Gaskets and seals of EPDM / Neoprene rubber and as amended from time to time and suitable for water supply main including loading freight, transit, unloading and stacking them at site etc. complete Pumping Main 50 mm Valve
5
-
-
... More
SI NO12.14.6 DI Pressure Reducing and Flow Limit Control Valve (PN10/16) with the function to reduce higher upstream pressure into a preset lower downstream pressure and to not allow flow rate in the line to exceed beyond the defined set point. The flow orifice diameter is designed based on the set point as per the design requirement. The set point can be changed to a maximum of +10%. “Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Pressure Reducing and flow limit control valve with cast body of ductile iron grade GGG-40 or equivalent grade or as per IS 3896-Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - to prevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. 2 pressure gauges for operator-friendly control to determine the actual inlet and outlet pressure connected directly to the valve. Flange connection dimensions according to EN 1092, Part 2/ ISO 7005[DIN]/ IS 1538, all parts (Epoxy coating, and diaphragm) in contact with medium are as per KTW and DVGW certified (harmless)/WRAS & NSF approved. The EPDM rubber & Epoxy coating (EP-P) should be approved by W270.(EP-P)/ WRAS & NSF.”Pilot valve system having Stainless Steel / Brass fittings with spring of stainless steel 304 as per standard parts according to DIN EN 12 266-1 and Stainless steel 316 orifice plate shall be as per the set point of flow rate, all the external control tubing of SS 304 / Copper/ reinforced plastic rated PN16, Tightness to DIN EN 12 266-1, leakage rate A (or) equivalent and the needle valve/ speed control device should be provided to vary opening speed of the main diaphragm with self- cleaning filter to avoid possibility of dirt build up inside the control tubing Distribution System 80mm
1
-
-
... More
100mm
6
-
-
... More
200mm
3
-
-
... More
250mm
1
-
-
... More
Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorriosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished. Distribution System 100 mm
5
-
-
... More
Supply and delivery of DI D/F specials of conforming to IS 9523/2000 specifications at site of work including all taxes, duties, loading, transportation, unloading, insurance etc., complete and as directed by Engineer incharge. Pumping Main 150 mm Flanged Socket Tail Piece
168
-
-
... More
150 mm Flanged Spigot Tail Piece
192
-
-
... More
150 mm DUCKFOOT BEND
135
-
-
... More
150x150x100 mm DI D/S Tee with Flange
22
-
-
... More
200x150x250 mm DI D/S Tee with Flange
31
-
-
... More
150x 150 mm DI D/S Tee with Flange
27
-
-
... More
100 mm Flanged Socket Tail Piece
18
-
-
... More
100 mm Flanged Spigot Tail Piece
20
-
-
... More
100 mm DUCKFOOT BEND
160
-
-
... More
200 mm Flanged Socket Tail Piece
84
-
-
... More
200 mm Flanged Spigot Tail Piece
92
-
-
... More
200 mm DUCKFOOT BEND
90
-
-
... More
300 mm Flanged Socket Tail Piece
148
-
-
... More
300 mm Flanged Spigot Tail Piece
168
-
-
... More
300 mm DUCKFOOT BEND
184
-
-
... More
Lowering of DI pipes and specials carefully into the trench and laying to proper grade and alignment including labour charges, incidental and operational charges etc complete as per standard specifications and as directed by the Departmental Engineer. Pumping Main 150mm diameter
940
-
-
... More
Pumping Main 200mm diameter
1773
-
-
... More
Pumping Main 300mm diameter
750
-
-
... More
Lowering HDPE PE100PN6 pipes and specials to trench and laying to proper grade and alignment and as directed by the Departmental Engineer Distribution System 90 mm HDPE PE100PN6
2685
-
-
... More
110 mm HDPE PE100PN6
3189
-
-
... More
125 mm HDPE PE100PN6
1359
-
-
... More
140 mm HDPE PE100PN6
1858
-
-
... More
160 mm HDPE PE100PN6
1111
-
-
... More
180 mm HDPE PE100PN6
1287
-
-
... More
200 mm HDPE PE100PN6
1379
-
-
... More
225 mm HDPE PE100PN6
85
-
-
... More
250 mm HDPE PE100PN6
54
-
-
... More
Cutting of CI and DI pipes and specials true to axis and filing smoothly and finishing the ends complete, with / without water in the pipe including labour charges, incidental and operational charges etc complete as per standard specifications and as directed by Departmental Engineer. Pumping Main 150mm diameter
10
-
-
... More
200mm diameter
18
-
-
... More
300mm diameter
8
-
-
... More
Cutting the HDPE pipes true to axis and finishing the ends complete. Distribution System 90 mm HDPE PE100PN6
67
-
-
... More
110 mm HDPE PE100PN6
80
-
-
... More
125 mm HDPE PE100PN6
34
-
-
... More
140 mm HDPE PE100PN6
46
-
-
... More
160 mm HDPE PE100PN6
28
-
-
... More
180 mm HDPE PE100PN6
32
-
-
... More
200 mm HDPE PE100PN6
34
-
-
... More
225 mm HDPE PE100PN6
2
-
-
... More
250 mm HDPE PE100PN6
1
-
-
... More
Jointing C.I/ D.I-S/S pipes and specials with rubber gaskets (tyton joint) including cost of lubricants. (including cost of jointing materials) Pumping Main 150mm diameter
171
-
-
... More
200mm diameter
323
-
-
... More
300mm diameter
137
-
-
... More
Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc.,complete as per directed by Departmental Engineers. Distribution System 90 mm HDPE PE100PN6
54
-
-
... More
110 mm HDPE PE100PN6
64
-
-
... More
125 mm HDPE PE100PN6
27
-
-
... More
140 mm HDPE PE100PN6
37
-
-
... More
160 mm HDPE PE100PN6
22
-
-
... More
180 mm HDPE PE100PN6
26
-
-
... More
200 mm HDPE PE100PN6
28
-
-
... More
225 mm HDPE PE100PN6
2
-
-
... More
250 mm HDPE PE100PN6
1
-
-
... More
Testing of DI/HDPE pipes with hydraulic testing equipment by filling with water ( including cost of water ) and testing to recommended pressure in convenient strectches and attending the burst if any occurred during the test , excluding the cost of pipes , including other incidental and operational charges etc . complete for following diameters of pipes Pumping Main 150mm diameter
940
-
-
... More
200mm diameter
1618
-
-
... More
300mm diameter
750
-
-
... More
Testing of DI/HDPE pipes with hydraulic testing equipment by filling with water ( including cost of water ) and testing to recommended pressure in convenient strectches and attending the burst if any occurred during the test , excluding the cost of pipes , including other incidental and operational charges etc . complete for following diameters of pipes Distribution System 90 mm HDPE PE100PN6
2685
-
-
... More
110 mm HDPE PE100PN6
3189
-
-
... More
125 mm HDPE PE100PN6
1359
-
-
... More
140 mm HDPE PE100PN6
1858
-
-
... More
160 mm HDPE PE100PN6
1111
-
-
... More
180 mm HDPE PE100PN6
1287
-
-
... More
200 mm HDPE PE100PN6
1379
-
-
... More
225 mm HDPE PE100PN6
85
-
-
... More
250 mm HDPE PE100PN6
54
-
-
... More
Barricading work (Where the lines are in narrow width of municipality area, busy streets like Market, Bus-stand and in the Highways etc.) for laying of pipe line using casurina poles at 1.50m center to center (8cm to 10cm dia. and 1.80m height) vertical with horizontal poles in two rows, painting the vertical poles in the road facing sides with ready mix paint, tying the vertical and horizontal poles with coir rope including supplying, delivery and fixing of GI sheet (0.90m x 0.8mm thick) in the horizontal poles and fixing 75mm dia. reflectors including earth work excavation for fixing vertical posts and finally removing and stacking the materials safely for further use etc., complete and as directed by Department engineers.
9789
-
-
... More
Construction of Thrust blocks using M20 grade Concrete using 20 mm Blue granite jelly for plain cement concrete, including necessary excavation,sand filling, M20 grade concrete and shuutering charges for all the sides and providing skin reinforcement for all sides using 12mm @200 mm c/c asperdrawing etc all complete ( The rate is inclusive of cost of reinforcement rods ) 150mm - 90 Deg D/S Bend
4
-
-
... More
150mm - 45 Deg D/S Bend
4
-
-
... More
150mm - 22 1/2 Deg D/S Bend
6
-
-
... More
200mm - 90 Deg D/S Bend
2
-
-
... More
200mm - 45 Deg D/S Bend
3
-
-
... More
200mm - 22 1/2 Deg D/S Bend
4
-
-
... More
300mm - 45 Deg D/S Bend
1
-
-
... More
300mm - 22 1/2 Deg D/S Bend
4
-
-
... More
Construction of chamber for sluice valve & scour valve using second class chamber bricks in cement mortar 1:4 and necessary plastering with cement mortar 1:3 for 12 mm both inside and outside, precast concrete covers as per drawing , as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing. Pumping main 150mm diameter
7
-
-
... More
200mm diameter
2
-
-
... More
300mm diameter
2
-
-
... More
Construction of chamber for sluice valve & scour valve using second class chamber bricks in cement mortar 1:4 and necessary plastering with cement mortar 1:3 for 12 mm both inside and outside, precast concrete covers as per drawing , as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing. P For Scouring 80 mm Valve
5
-
-
... More
Construction of chamber for sluice valve & scour valve using second class chamber bricks in cement mortar 1:4 and necessary plastering with cement mortar 1:3 for 12 mm both inside and outside, precast concrete covers as per drawing , as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing. P For Air Valve 50 mm Valve
10
-
-
... More
Construction of chamber for sluice valve & scour valve using second class chamber bricks in cement mortar 1:4 and necessary plastering with cement mortar 1:3 for 12 mm both inside and outside, precast concrete covers as per drawing , as per IS specifications and as directed by the engineers for the following sizes in metres,as per drawing. Distribution System Valve pit of size -4.0mx2.0m
54
-
-
... More
Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
978.9
-
-
... More
DI Flow rate Limit control Valve (PN10/16) with the function to limit the flow rate to a set point. In case the downstream demand increases beyond the set limit, the valve closes down to bring the flow back to set limit. The valve shall have an orifice plate and the orifice diameter is designed based on the set point as per the requirement and installed downstream of the control valve.“Manufacture supply and delivery of DI D/F Diaphragm type own medium controlled Flow rate Limit Control valve with cast body of ductile iron grade GGG-40 or equivalent grade or as per IS 3896-Part-2-1985 customized control cylinder for linear control behaviour or equivalent, performed diaphragm and pull out safe profile sealing ring of EPDM, threaded inserts (CORFIX - to prevent the coating from coming off in the connections area as well as corrosion and incrustations in the control circuit) or equivalent. Flange connection dimensions according to EN 1092, Part 2/ ISO 7005[DIN]/ IS 1538, all parts (Epoxy coating, and diaphragm) in contact with medium are as per KTW and DVGW certified (harmless)/WRAS & NSF approved. The EPDM rubber & Epoxy coating (EP-P) should be approved by W270. (EP-P)/ WRAS & NSF.” Pilot valve system having Stainless Steel / Brass fittings with spring of stainless steel 304 as per standard parts according to DIN EN 12 266-1, orifice plate shall be as per the set point of flow rate and all the external control tubing of SS 304 / Copper/ reinforced plastic rated PN16 Tightness to DIN EN 12 266-1, leakage rate A (or) equivalent and the needle valve/ speed control device should be provided to vary opening speed of the main diaphragm with self-cleaning filter to avoid possibility of dirt build up inside the control tubing. 100 mm diameter
1
-
-
... More
150 mm diameter
2
-
-
... More
Excavating of driving pit and receiving pit of size 3.00m (length) x 3.50m (breadth), upto 5m depth in all soil strata including shoring and strutting using 6mm tk MS Plate of size 3.50m x 3.50m usable for 20 operations and providing 16mm thickness MS plate of size 3.00m x 3.50m with 100mm x100mm x 12mm angles of 4m length for holding the MS plates for Thrust arrangements to receive the impacts during pushing operation of encasing pipe. Lowering the following size of MS encasing pipe by using Contractor’s crane and machineries and jointing MS pipes by welding, across the National Highways/State Highways/ Railways/Canal crossing etc and driving the horizontal bore by pushing / jacking method (trenchless technology method) using contractor’s machineries such as cranes, jacks, jacking materials, generator, welding machineries, compressor, jack hammer and other equipments etc. without interfering and causing any hindrance to the movement of traffic or any other vehicles, without any disturbances to the railway/road/canal formation etc. including bailing / pumping of water where ever necessary without affecting any installation like water supply pipeline/telephone cable, electric cables etc. passing nearby area and scooping the earth inside the pipes and pit and depositing the surplus earth in a convenient place and leveling the site after completion of entire work as directed by TWAD Engineers. The rate includes the cost of driving pit, thrust bed/wall and receiving pit to the depth of om to 5m excluding the cost of MS pipes. For 200mm dia MS encasing pipe for various thickness
150
-
-
... More
Electrical Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP, Fully Automatic Air break Star Delta up to 20 HP and Auto Transformer starter for above 20 HP starting and for continuous operation. 3840 lpm against a total head of 60m
2
-
-
... More
1200 lpm against a total head of 25m
6
-
-
... More
400 lpm against a total head of 25m
2
-
-
... More
Supply and delivery of floor mounted type FCMA Air/ Oil Cooled soft starter suitable for the LT motor offered for operation in AC three Phase 50Hz (+/- 5%), 415V(+/-10%) including line contactors suitable for next standard higher KW rating, Over load relay, instrument panel with frequency meter, Ammeter, Voltmeter, indicating lamp 6Nos, LED ON/OFF type and Start /Stop push button. - 75HP or Suitable
2
-
-
... More
Supply and delivery of Star-Delta starter where panel boards are available confirming to IS 13947, IEC60947-1 and as amended thereafter with suitable KW rating for operation in AC/three Phase/50HZ(+/- 5%) and 415V (+/- 10%) including 3 pole magnetic contactor with under voltage release - 3 nos., CT operated Ammeter(65 mm dia) with suppressed scale, Voltmeter (65mm dia), Voltmeter selector swicth, Minature Circuit breaker, Thermal Overload relay, Air Break contactors suitable for next Standard higher KW rating, Single phasing preventor, dry running preventor and On/Off Push button switches, wiring with 1 sq.mm/4 sq. mm copper pvc insulated cable, powder coated vermin proof box, including the capacitor (the cost of capacitor is to be taken separately). 5 HP or Suitable
2
-
-
... More
12.5 HP or Suitable
6
-
-
... More
Supply, delivery, erection, testing and commissioning of following sizes of power shunt capacitor for power factor improvement, suitable to operate on 415V, 3Ph,50Hz A/C supply, on suitable angle iron frame-works (37.5 mm x 37.5 mm x 6.24mm ) at a height of 0.25m from the ground, including earthing and incidental civil works etc., complete. 22 kVAR
2
-
-
... More
4 kVAR
6
-
-
... More
2 kVAR
2
-
-
... More
Supplying and fixing of following capacity Triple Pole fuse carrier in MS Sheet steel encloure with provision for accommodating the TNEB meter including earthing etc., complete as per TANGEDCO which includes LT meter panel board 400 Amps
1
-
-
... More
Supplying and fixing of following capacity Triple Pole SFU with fuses on suitable angle iron frame with earth connection only. 400 Amps
1
-
-
... More
Supply, delivery, erection, testing and commiossioning of floor mounted M.V.panel(SCADA Compatible) with aluminium bus bars and consisting of required quantities of the following accessories with necessary interconnections between busbars, switches and trunking box, measuring instruments such as voltmeters,ammeters with selectorswitches, energy meter,phase indicating lamps, Mechanical Interlock, etc., complete with incidental civil works and comprising of following and as per specifications & drawings; The panel shall be powder coated as per specification. Capacity of M.V. Panel - 400 Amps
2
-
-
... More
400 A FP MCCB 25 kA (Incomer) - 2 nos
2
-
-
... More
200 A TPN MCCB 10 kA - 2 nos for pumps
8
-
-
... More
63 A TPN MCCB 10 kA - 8 nos for pumps
1
-
-
... More
32 A TP MCB 10 kA for Spare
2
-
-
... More
160 A TP MCCB 10 kA - 2 nos for Pump cap.
8
-
-
... More
32 A TP MCCB 10 kA - 8 nos for Pump cap.
3
-
-
... More
Supplying and laying following LTUG cables in a trench to be excavated at a depth of 2 ½ ' putting 6” layer of sand and covering the cable with brick and sand refilling the earth to make good as directed. 2 Runs Each DO - 3 ½ core 240 sq.mm. for PS(Incomer)
100
-
-
... More
DO - 3.5 core 95 sq.mm - Panel to Starter (PS) - Sump
60
-
-
... More
DO - 3 core 50 sq.mm - Starter to Motor - Sump
100
-
-
... More
DO - 4 core 4 sq.mm - Panel to Starter (PS)
240
-
-
... More
DO - 3 core 4 sq.mm - Starter to Motor
2800
-
-
... More
DO - 4 core 4 sq.mm. for Aux.supply
50
-
-
... More
Supplying and fixing of cable gland and termination with Aluminium cable lugs for following PVC UG cable and with earth connection DO - 3 ½ core 240 sq.mm.
16
-
-
... More
DO - 3 ½ core 95 sq.mm.
16
-
-
... More
DO - 3 core 50 sq.mm
10
-
-
... More
DO - 3 core 4 sq.mm
40
-
-
... More
DO - 4 core 4 sq.mm
10
-
-
... More
Supply, delivery and erection of Three Phase 4 way 32 Amps, 10kA LDB with the following:1 No of 40 A FP isolator for incoming supply3 Nos. of 16A, DP RCCB3 Nos. of 16A, SP MCB1 No of 16A, DP MCB3 Nos of 6A, DP MCBin sheet steel enclosure fitted with busbars and neutral links and suitable angle iron frame works with provision for earthing etc. complete.
1
-
-
... More
Run of 2 of 2.5 sq mm PVC unsheathed copper single core cable in PVC pipe for mains with continuous earth connection by 14 SWG wire From the MCB DB to the Switch boards in office, store,and 16A power socket.
150
-
-
... More
Wiring with 2.5 sq mm PVC insulated single core copper cables of 650 V Grade on suitable rigid PVC pipe on wall and ceiling with PVC accessories, with MS switch box covered with 3 mm thick hylam sheet with continous earth wire connection of 14 SWG TC wire. Light points
8
-
-
... More
Fan Points
1
-
-
... More
Supply and installation of 240 V - 1 x 20 W LED TL fitting box type with enamelled reflector complete with all accessories - choke, starter, tube, etc. suitable for wall mounting or roof mounting on conduit tube.
4
-
-
... More
Supplying and fixing of 18" sweep AC exhaust fan complete including providing necessary opening in the wall.
1
-
-
... More
Supply and fixing of 48" sweep AC ceiling fan complete with regulator with lm down rod (stem pipe) including supplying and fixing of fan clamp with side plates and cross arms
1
-
-
... More
Earthing as per IS 3043/1987 and Latest amendments specifications with necessary masonary work.
4
-
-
... More
Supply and connection of earthing conductor including two coats of approved painting and laying between earth pit and equipment. 40 x 6 mm GI Flat
150
-
-
... More
Supply and connection of earthing conductor including two coats of approved painting and laying between earth pit and equipment .25 x 6 mm GI Flat
50
-
-
... More
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. Above 70HP to 80HP
2
-
-
... More
7.5HP to 20HP
4
-
-
... More
3HP to 7.5HP
4
-
-
... More
Supply and delivery of 11 KV/433 Volts, 22 KV/433 Volts, three Phase 50 HZ double wound oil immersed natural air cooled, core type continous rating, outdoor distribution power transformer with copper winding for voltage ratio 22-11 KV/433 volts between phases with neutral brought out at LV side. The transfer shall be contained in a mild steel plain & radiator cooled tank, conforming to IS 1180 (Part I) of 2014 with off-load tap switch for ±10% on L.V side and ±5 % on H.V.side. The transformer shall be supplied with first filling of oil and consisting of all the fittings and accessories such as Inspection cover,Oil level indicator with minimum and filling level markings, Externally operated off circuit tap changing switch with locking device & keys, H.V. Terminals- Bushings, L.V. Terminals cable box Rating plate, Two earthing terminals, Two lifting hooks etc complete as per IS 1180 (Part I) of 2014 and as amended thereafter 160KVA
1
-
-
... More
Supply, Laying and Jointing of HT cable -XLPE insulated Armoured Aluminium Conductor Cable. - 3C X 185 sqmm
60
-
-
... More
11KV HT Cables Jointing( including termination kit) - 3C X 185 sq.mm
7
-
-
... More
Supply, conveying and fixing CI specials as per the latest revision of IS 1538 including with ISI markings on it including earthwork excavation, lowering into the trenches, aligning, refilling the trenches with excavated soil, watering and ramming to consolidation, etc. 300 x 300mm Flange tee
2
-
-
... More
250 x 300mm Taper
2
-
-
... More
150 x 200mm Taper
8
-
-
... More
200 x 200mm Flange tee
8
-
-
... More
200 mm dia CI blank flange
1
-
-
... More
300 mm dia CI blank flange
1
-
-
... More
Supply, conveying and fixing following CI pipes as per latest revision of IS 1536 with ISI markings on it excluding earthwork excavation 300 mm D/F C.I cut pipe - 0.5m long
3
-
-
... More
300 mm D/F C.I cut pipe - 1.0m long
4
-
-
... More
200 mm D/F C.I cut pipe - 0.5m long
12
-
-
... More
200 mm D/F C.I cut pipe - 1.0m long
16
-
-
... More
Supplying, delivery and installation at site, conveying and fixing the CI sluice valves as per IS 14846/2000 PN 1 with ISI marking including loading, transportation charges and stacking etc complete as per specifications 300mm Sluice valve
3
-
-
... More
200mm Sluice valve
8
-
-
... More
Supplying, delivery and installation at site, conveying and fixing the CI D/F Reflux valves as per IS 5312/Part I /84 with Bye-pass arrangements with ISI marking including loading, transportation charges and stacking etc complete as per specifications 300mm Reflux Valve
3
-
-
... More
200mm Reflux Valve
8
-
-
... More
Supplying, delivery and installation at site, conveying and fixing the CI D/F NRV as per IS 5312/Part I /84 with Bye-pass arrangements with ISI marking including loading, transportation charges and stacking etc complete as per specifications 300mm NRV
2
-
-
... More
200mm NRV
8
-
-
... More
Supplying, delivery and installation at site, conveying and fixing the CI double air valve as per IS14845/2000 with ISI marking including loading, transportation charges and stacking etc complete as per specifications 50mm Double Air valve
5
-
-
... More
HSC Connection - 20 mm - Providing House service connection with MDPE 20mm pipe (supply, lowering, jointing & testing), electrofusion tapping saddle PE 80 blue, PN 12.5 with female threaded metal insert of SS 304, Brass Ferrule as per IS 319 grade of sizes 15mm, 20mm and 25mm size and threaded to suit the corresponding bore sizes of 15mm dia size (1/2"), Poly Propylene compression Male Threaded Adaptor with metal insert of SS 304, Poly propylene 90 Degree Compression elbow with compression joint at both ends, Poly Propylene compression Female Threaded Adaptor with metal insert of SS 304 and protection box of size 20cm x 30cm for fixing of Water Meter all as per standard including road cutting, replacement of utilities providing house service connection, refilling, retoration of roads/drains testing etc complete with materials and specification as instructed by department officers
800
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements