Directorate General Of Lighthouses And Lightships Tender

Painting two coats or more coat Exterior weather paint (APEX ULTIMA) over a coat of cement primer with First quality of approved manufactures on undecorated wall surface, Ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar draps and other foreign matter etc., applying one coat of cement primer including the cost of supply of all labours, materials, tools & plants, scaffolding and ladder, brushes, putty wherever required and all other charges etc., complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work for wood.( Lighthouse Doors and Windows).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work under a coat of With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.( Lighthouse Handrail).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work for wood. (Buildings)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work under a coat of With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.

French polish to the old wooden furnitures like cot, dining chairs, teapoy etc after attended to the minor repairs including replacement of new wooden members if necessary as per the direction and condition of the materials etc complete.

Wooden single cot

Wooden chair with arm

Tea poy

Wooden table

Wooden dining table

Wooden dining chair

Repairs to brick or concrete wall removing the cracked surface in "V" cutting same to Re- plastering with C.M 1:3 (1 cement, 3 riversand) including cost of all labours, materials, tools, scaffolding, curing, etc. complete.

Cleaning of open well by removal of roots if and unwanted things mechanically or by manually and disposal of the same as directed as per the conditions. Cost including man and materials, tools & plants etc complete.

Cleaning of Septic Tank by removal of slugde mechanically or by manually and disposal of the same as directed as per the conditions . Cost including man and materials ,tools & plants etc complete.

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Replacing the existing broken glass panes with new glass panes 4mm thick including removing the broken glass panes and beadings and replacing of teak wood wooden beadings to the doors & windows, cost inclusive of all materials, labours, tools, etc., complete.

Replacement of unserviceable/ broken fittings of doors windows, Ventilators, Cupboards of shutters and as wherever directed with new aluminium fittings (Heavy duty) fitted with brass screws, including removing damaged fitting and Disposing unserviceable materials from the site etc, supply of all materials, labours, tools, etc. complete.

100mm Al. butt hinges

75mm Al. butt hinges

Replacement of Al. Tower bolt 250 mm x 10 mm:

Replacement of Al. Aldrop 300 mm x 16 mm

Replacement of Al.Aldrop 250 mm x 16 mm

Al. tower bolt 150mm x 10mm

Door stopper Aluminium with rubber head

Replacing the damaged water fittings with new water supply fittings and fixtures of approved quality as per the following items including all labour, materials etc complete and specials should be of ISI make and approved quality, colour and make complete with Epoxy coated aluminium rod.

15 mm C.P. brass stop cock

15 mm PVC connection pipe with brass unions

C.P brass 15mm dia heavy duty ( Long body)

15mm dia stop cock (concealed)

15mm dia 230mm shower arm

15mm dia shower rose 100mm dia

25mm dia Ball valve

32mm dia Ball valve

40mm dia Ball valve

CP Brass 15 mm two way Tap with Health Faucet Set

CP waste coupling with 32 mm dia pipes

Providing and fixing PTMT grating 125 mm nominal dia. of approved quality and colour.

Providing and fixing PTMT gully trap

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible Pipe 32mm dia.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. This includes jointing of pipes & fittings with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

75 mm dia Pipes

110 mm nominal dia Pipes

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

Coupler 110mm

Coupler 75 mm

110 mm dia PVC Elbow

110 mm dia PVC "TEE"

110 mm dia PVC Bend / offset

PVC 110 mm Door bend

PVC 75 mm door bend

PVC 75 mm plain bend

Replacement of damaged netlon mesh of windows, ventilators, meat safe, shutters etc and as wherever directed including removing the damaged netlon mesh and refixing with new ones with teak wood being, including disposal of unserviceable materials etc, supply of all labours, tools, materials, etc. complete

Raking out joints in lime / cement mortar and preparing the surface for repointing. Flush pointing With cement mortor 1:3 mixed with 2% integral water proofing compound by weight of cement for flat brick tile on top of roof, as directed including supply of all labours, materials, tools & plants etc., Complete

Providing and laying in situ seven course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with Aluminium paint ( shall be paid separately at item no.22 & 23).

Applying priming coat With ready mixed aluminium primer of approved brand and manufacture.

Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Dismantling tile work in floors and walls in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-inCharge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600mm x 600 mm.

Providing and fixing Glazed tiles for walls Dadoing/ Decorative tiles Concept type design tiles Dadoing for washroom, Anti Skid tile flooring are confirming to IS: 13753 of minimum thickness 10mm of approved make like (NITCO, Orient, Somany, Kajaria) or equivelent in all colour, Glazed tile of size 300mm x 450mm & floor tiles 300 mm x 300mm after spreading & leveling with C.M.1:3 of thick 20mm (avg) & pointing with white cement of approved quality admixture with colour pigment etc. as directed including supply of all labour, material, curing, tools & plants etc. complete.

Providing & fixing ceramic Antiskid tiles of approved first quality, size and colour (300mm x 300mm)

Decorative concept design tiles for walls of bath room walls, toilets etc., (300mm x 450mm)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, Verandah and steps and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Providing edge moulding to 18 mm thick granite stone counters, Vaniti etc., including machine polishing to edge to give high gloss finish complete as per design approved by Engineer-in-Charge.

Kitchen (cooking platform)

Verandah and Steps

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern I.W.C: pan of size 580mm x 440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

E.W.C. pan with ISI marked white solid plastic seat.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

White Vitreous China Wash basin size 550mm x400 mm with a 15 mm CP Brass single hole basin mixer.

Size 450mm x 300 mm with single hole 15mm C.P. brass pillar tap ( approved colour )

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :

610mm x 510mm bowl depth 200mm

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Plain cement concrete 1:3:6 (1 Cement : 3 coarse sand derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) standard specifications and as directed by the Engineer-in-charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) including supply of material and labour charges etc complete for kerb wall.

Providing 15 mm thick Cement Plaster in single coat on rough side of single or half brick wall for interior / exterior plastering up to floor two level, including arises, internal rounded angles chamfers and/ or rounded angles not exceeding 80 mm in girth and finished even and smooth in CM 1 : 4 including supply of all labours, tools, materials, etc. complete as directed by the engineer in charge.

Providing and laying factory made chamfered edge 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.

Providing and fixing bath room fittings like Mirror,Towel rail, Soap dishtray including cost of supply of all materials, labours, Screws and tools and all other charges etc., complete.

600mm x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick.

PTMT soap Dish Holder having length of 138mm.

600 mm long towel rail.

Providing and fixing water supply pipe in various dia of CPVC of approved first quality pipes ( FINOLEX/ PRINCE/ ASHIRVAD/ORIPLAST/SUPREME) including all CPVC fittings like Elbow,Tee etc., fixing in walls, ceiling with necessary G.I Clamps, Screws and laying of pipes in trenches of dia varying from 20 mm to 75 mm dia as and directed, including cost of supply of all materials, labours, tools and plants and all other charges etc., complete.

20mm dia CPVC pipe

25mm dia CPVC pipe

32mm dia CPVC pipe

Making soak pit 2.5 m diameter 3.0 metre deep with 45 cm x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5, including material and labour all complete as directed.

Supply & Fixing of Prefabricated Portable EWC toilet block of approved make for single user shall be suitable for mounting on plain ground. The Superstructure and base shall be manufactured by using roto-moulded process. The overall dimension of toilet shall be 910 mm (w) x 1075 mm (D) x 2060 mm (H) 1.FLOOR / BASE: The floor/ base shall be double wall constructed readymade base made out with Plastics material by roto-moulded process. The PUF shall be filled in cavity between two walls for extra load bearing. The base shall be single piece moulded with required outlets. Special handle shall be provided on two side of toilet block for easily shifting, loading and un-loading the whole block. 2.Wall / Roof (Superstructure): The superstructure of toilet shall be One piece moulded Plastics walls and roof with single wall construction by Roto molded process. The superstructure shall be fixed on Base with suitable fasteners. The air ventilator shall be provided in three side walls for cross air circulation. A special top cap shall also be fixed on top of toilet for natural light and air vent. The superstructure shall have sufficient number of embossed ribs for better strength. 3.DOOR SHUTTER: 20mm thick and 600mm width Single leaf shutter shall be made out with extruded PVC Section. The door shutter shall be provided with 1 No. aldrops at outside & 1 No. tower bolt in side for locking, and 100mm long handles shall also provide on both the sides 4.SANITATION, PLUMBING & ELECTRICAL WORK: 1 No. Ceramic EWC pot (ISI marked) with solid plastic seat cover and PVC good quality flush tank, 1 No. Drain hole with C.P grater,1 no. Tap connection with PVC Pipe & CP Tap, 1 no of CP health faucet, 1 No of LED Bulb with switch shall be provided inside the toilet. Note : Civil works for base platform not included. The Bio toilet shall be ready to use in all respects and all works including materials, labour, transportation, loading, unloading, installation etc., shall be firms scope. Any item not specifically mentioned, but required for bio toilet installation/ functioning at site as directed by engineer-in-charge shall be provided and no additional claim shall be made on this account. The firm shall ensure the inspection of bio toilets for approval as per the specification at manufactures place, to avoid rejection of item after delivery at site.

Supply & Fixing of Bio septic tank of approved make 2000 Litre Specification: Capacity 2000 Ltr, Length 1200 mm, diameter 1200 mm, No of Man Hole : 2 nos, Man hole of dia 450 mm as directed by engineer-in-charge. The firm shall ensure the inspection of bio septic tank for approval as per the specification at manufactures place, to avoid rejection of item after delivery at site.

Supplying and fixing of Prefabricated shelter shall be suitable for mounting on readymade concrete floor / pillars. The components shall be fabricated at factory for easy to assembly at site. (designed for differently abled person)SPECIFICATION FOR PUF INSULATED PREFABRICATED CABIN. Size : 6*6*8 Ft M.S. Structure: The supported M.S. Structure like column, truss / portal truss, purlin, tie member etc. shall be made out with suitable size rolled / tube / folded sections. The structure shall be painted with One coat of red oxide as primer. Wall: The insulated walls shall be made of Sandwich panels. The sandwich panels shall be made out of 0.35mm thick Pre coated steel sheet on both side of PUF ( Polyurethane foam ). The total thickness of panel shall be 30mm. The panels are join together by tongue and groove method. (RAL 9002- WHITE COLOUR) Roof: The insulated Roof cladding shall be done with sandwich type panels. The panels shall be made out with 0.35 mm thick Pre coated Profile steel sheets at outer side and 0.35 mm thick Pre coated plain sheet at inner side of PUF ( Polyurethane foam ). Total thickness of roof panel shall be 30 mm. Suitable ridge shall be made out from Pre coated steel sheets. The roof shall have minimum projection of 0.3m from the eaves wall and 0.15m from the gable walls. (RAL9002 -WHITE COLOUR) Door : The door frame shall be made out with MS Folded section. The shutter shall be made out with Pre coated steel sheets both side of PUF. The door shutter shall be fixed with the door frame with hinges. The door shutter shall be provided with 1 No. aldrops at out side, 1 no. Tower bolts at the center inside and handles shall be provided on both the sides. The width of Door shall be 1mt . Ventilator: 3 side suitable ventilator shall be provided. SANITATION, PLUMBING & ELECTRICAL WORK: 1 No. Ceramic EWC pot (ISI marked) with solid plastic seat cover and PVC good quality flush tank, 1 No. Drain hole with C.P grater,1 no. Tap connection with PVC Pipe & CP Tap, 1 no of CP health faucet, 1 no of side handle / CP towel rail, 1 No of LED Bulb with switch shall be provided inside the toilet. Notes : Civil works for base platform not included. The Bio toilet shall be ready to use in all respects and all works including materials, labour, transportation, loading, unloading, installation etc., shall be firms scope. Any item not specifically mentioned, but required for bio toilet installation/ functioning at site as directed by engineer-in-charge shall be provided and no additional claim shall be made on this account.Provision for 300 litres Loft tank: Shall be provided on top of the toilet Roof. The firm shall ensure the inspection of bio toilets for approval as per the specification at manufactures place, to avoid rejection of item after delivery at site.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).Schedule 40.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.