Department Of Local Administration Tender

Code No.2.18.2: Close timbering over areas including strutting,shoring and packing cavities (wherever required ) etc. complete (measurements to be taken of the face area timbered) . Depth exceeding 1.5m but not exceeding 3m

Code No.2.25: Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m

Code No.2.26.1: Extra for every additional lift of 1.5m or part there of in excavation / banking excavated or stacked materials - all kinds of soil

Code No.2.27: Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete

Code No.5.1.2: Providing and laying in position Reinforced cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Code No.4.1.5: Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No.4.12: Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacture's specification.

Code No.5.9.1: Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete

Code No.5.9.2: Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness) including attached pilasters, butteresses , plinth and string courses etc.

Code No.5.9.3: Centering and shuttering including strutting, propping etc and removal of form for - Suspended floors, roofs, landings, balconies and access platform

Code No.5.22.6: Steel reinforcement for R.C.C.work including straightening , cutting, bending, placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more

Code No..6.1.2: Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 coarse sand)

Code No.10.25.2: Steel work welded in built up sections/ framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works.

Code No.13.9.2: Cement plaster 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement - 20mm cement plaster

Code No.13.16.1: 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)

Code No.13.21: Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers

Code No.15.2.1: Demolishing cement concrete manually /by mechanical means including disposal of material within 50 metres lead - nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Code No.15.2.2: Demolishing cement concrete manually /by mechanical means including disposal of material within 50 metres lead - Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Code No.30.7: Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Code No.31.4.2: Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete - 50 to 80 mm nominal bore.

Code No.31.5.1B: Making connection of uPVC distribution branch with Upvc main of following sizes by providing and fixing tee including cutting the pipe etc.,compete.-110 mm dia to 160 mm dia nominal bore.

Code No.31.48.4A: Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 80 mm dia.

Code No.31.48.4B: Providing and fixing C.I. sluice valve (PN 1.6) (with handwheel) conforming to IS 14846 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 100 mm dia.

Code No.31.48.7C: Providing and fixing C.I. non return valve (PN 1.6) conforming to IS 5312 and ISI marked, with bolts, nuts, rubber insertion etc.,complete (the tail pieces if required will be paid separately) - 80 mm dia

Code No.31.136.1H: Providing, laying and jointing G.I pipes of medium class (blue)(TATA,TNT,Nezone,Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,excluding GI specials such as bends,tees, elbow,coupling,reducer etc.,complete all as per IS and CPWD specification. -80mm dia.

Code No.31.136.1I: Providing, laying and jointing G.I pipes of medium class (blue)(TATA,TNT,Nezone,Apollo,Zenith) conforming to IS specification 1239 part I and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,excluding GI specials such as bends,tees, elbow,coupling,reducer etc.,complete all as per IS and CPWD specification. -100mm dia.

Code No.31.137.1H: Providing and fixing in position G.I. equal Tee (UNIQUE/R Brand/HB Brand/UI Brand)conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 80mm dia.

Code No.31.137.1I: Providing and fixing in position G.I. equal Tee (UNIQUE/R Brand/HB Brand/UI Brand)conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete- 100mm dia.

Code No.31.141.1G: Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 80 mm dia.

Code No.31.141.1H: Providing and fixing in position G.I. elbow (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 100 mm dia.

Code No.31.145.1H: Providing and fixing in position G.I. coupling (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete - 80 mm dia.

Code No.31.145.1I: Providing and fixing in position G.I. coupling (UNIQUE/R Brand/HB Brand/UI Brand) conforming to IS 1239 part II and ISI marked,including labour charges for jointing,jointing materials etc,complete - 100 mm dia.

Code No.31.149.1H: Providing and fixing in position G.I. pipe nipple 15cm long, including labour charges for jointing, jointing materials etc,complete -100 mm dia.

Code No.31.160.1A: Providing, laying and jointing UPVC pipes(Finolex /Jain / Supreme / Truebore / Nandi) (1 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 20mm dia.

Code No.31.161.1D: Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC pecials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Code No.31.161.1E: Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC pecials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 90mm dia.

Code No.31.161.1F: Providing, laying and jointing UPVC pipes(Finolex / jain / Supreme / Truebore / Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC pecials such as bends,tees, threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.

Code No.31.165.1H: Providing and fixing in position UPVC moulded unequal Tee (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110 x 90mm dia

Code No.31.165.1L: Providing and fixing in position UPVC moulded unequal Tee (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 140 x 110mm dia

Code No.31.168.1L: Providing and fixing in position UPVC moulded elbow (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90mm dia

Code No.31.173.1C: Providing and fixing in position UPVC moulded saddle set (Finolex / jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 90 x 20mm dia

Code No.31.250.1F: Supplying of electrically operated wet type submersible motor and pumpset (Texmo/KSB/Taro/Kirloskar make), AC 3 phase, 415 volts, 50 Hz, 2900-3000 RPM. The pump shall have brass impeller, high grade steel shaft with sufficient stages with suitable suction and delivery sizes, complete. The rate includes, all taxes, freight, etc., FOR at site in UT of Puducherry. The pumpset shall be guaranteed for a period of one year from the date of commissioning.(10 HP Submersible motor and pumpset open Well).

Code No.31.252.1A: Supplying and fixing of 63 Amps capacity wall mounting panel board of size 1200mmx750mmx225 mm made of 16 gauge CR M.S. sheet painted with two coats of enamel paint, over zinc chromate primer, suitable for fixing switch disconnector, fuse switches etc. The panel board shall include power mat, copper busbar, 3mm thick hylan sheet, square voltmeter (96 mm-IMP/AE/L&T/Siemens), voltmeter selector switch, square ammeter (96 mm-IMP/AE/L&T/Siemens), 3 Nos of C.T. coil, 3 Nos. of indicator, 3 Nos. of toggle switches and 3 Nos. of side lock fuses, with 2 A fuse link complete.The board shall be mounted on an angle frame of 30mm x 30mm x 6mm with legs. The rate is inclusive of internal wiring and with copper earth flat linked with shutters and doors. Supplying and fixing of 2 Nos. of TPN (CG/L&T/Siemens/Standard make) 63 Amps, 415 V disconnector witch/cubical switch/fuse switch with fuse links complete . (1 No. for E.D. supply and 1 No. for Diesel Generator supply).Supplying and fixing of 2 Nos of 63 Amps, 415 V sconnector fuse switch/TPN Cubical switch (CG/L&T/Siemens/standard make) with fuse links capacitor motor control (1 number of power capacitor and 1 number of motor control), complete.- upto 12.5HP

Code No.31.256.1A: Supplying and fixing of fully automatic air break star-delta starter range for 5A to 13A F.A.S.D. (Bharat Culter Hammer/L&T/Siemens make) with suitable M.S. angle frame etc., complete.- 5HP to 12.5 HP pumpsets

Code No.31.258.1A: Supplying and fixing of 1x3x4 sqmm (single run) PVC insulated copper submersible flat flexible cable of Finolex make complete.-upto 10HP pumpset.