Department Of Atomic Energy Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Department Of Atomic Energy - DAE Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Dec 2024
Closing Date2 Jan 2025
Tender Amount₹ 3,89,85,000
Costs
EMD
₹ 7,79,700Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Indoor Shuttle Court At Sports Complex In Anupuram Township.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_GSO_839023_1Tender No
GSO/CTC/CEG/143/2024Tender Authority
Department Of Atomic Energy ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Technical Bid and Forms ACDFGH to be filled and uploaded
Form of Agreement to be signed and uploaded
Annexure 2 to 4 to be signed and uploaded
BOQ Items
... More
All kinds of soil upto 1.50mtr depth
380
-
-
... More
All kinds of soil exceeding 1.50 mtr depth but not exceeding 3.00 mtr depth
100
-
-
... More
Earthwork excavation by mechanical means (Hydraulic excavator)/manual means for foundations, trenches, etc., not exceeding 1.5mtr. in width or 10 sqm on plan in following type of soil/rock including bailing of water, if necessary, dressing of sides, levelling and ramming the bottom of trenches, refilling the sides of foundation as required with selected excavated earth and depositing/ disposing the surplus earth (Disposed soil to be levelled by breaking clods, if any and neatly dressed) within a lead of 50m, etc., all complete as per specifications and as directed.
-
-
-
... More
Ordinary/ soft rock upto 1.50 mtr. Depth
5
-
-
... More
Ordinary/ soft rock exceeding 1.50 mtr. depth but not exceeding 3.0 mtr. depth
5
-
-
... More
Excavating trenches of required width by mechanical means (Hydraulic excavator)/ manual means for pipes, cables etc., for depth upto 1.5m in all kinds of soil including excavation for sockets, dressing of sides, ramming of bottoms, getting out the excavated soil and then refilling the soil as required in layers not exceeding 200mm in depth, consolidating each deposited layer by ramming, watering etc., and disposing of surplus excavated soil as directed within a lead of 50m, (Disposed soil to be levelled by breaking clods, if any and neatly dressed) etc., all complete as per specification.
260
-
-
... More
Earthwork excavation for trial pits of required size in hard gravelly soil and other types of soil upto 1.50 mtr. depth without damaging the existing underground service lines including shoring, strutting, bailing of water, protection of existing underground utilities such as water line, service cables, etc., refilling the sides of trial pit as required with selected excavated earth and depositing / disposing the surplus earth (Disposed soil to be levelled by breaking clods, if any and neatly dressed) with a lead of 50 metres and finishing the surface to proper level etc., all complete as per specifications and as directed by Engineer- in-Charge.
50
-
-
... More
Filling available selected excavated earth (excluding rock) in trenches, plinth, sides of foundation etc., in layer not exceeding 200 mm in depth including consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.5m etc., all complete as per specification.
180
-
-
... More
Providing gravel base 100mm thick (consolidated thickness) including spreading gravel in uniform layers, watering, ramming, consolidating etc., all complete as directed.
110
-
-
... More
Clearing heavy jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30cm measured at a height of 1m above ground level, removal of rubbish upto a distance of 60m outside the periphery of the area cleared, cutting and stacking the useful fire wood if any within an initial lead of 100 mtrs etc., all complete as per specification and as directed by Engineer-In-Charge.
1580
-
-
... More
Trimming of tree branches, which causing hindrance to free vehicle movement, blocking street light and touching the building etc., on road sides, avenues, streets and near buildings, including cutting the branches of trees using necessary tools, collecting, transporting and disposing them at places shown by the department using their own means of conveyance all as directed by the Engineer-in- charge.
-
-
-
... More
Beyond 300mm upto and including 600mm Girth Trees
10
-
-
... More
Beyond 600mm upto and including 1200mm Girth Trees
5
-
-
... More
Providing Pre-Construction Anti-termite Treatment using Chlorpyriphos E.C 20% with 1 % concentration as detailed below including cost of chemicals, labour and all other incidental charges for entire ground floor area of building and injecting termicide emulsion to the soil in contact with the foundation along the perimeter of both internal and external walls, etc., all as per IS: 6313 (Part-2). Note:- 1) Top surface of cosolidated earth within plinth walls shall be treated with chemical emulsion @ 5 Ltr/Sq.m of the surface before the sand bed or sub-grade is laid.
2) Treatment along the external perimeter and internal perimeter at junction of the wall and the floor of the building shall be treated with chemical emulsion @ 7.5 Ltr/Sq.m, to facilitate this holes shall be provided @ 150mm apart upto GL for inner side and upto 300mm below GL for external perimeter. 3) The entire treatment shall be done as per the specifications and instructions of the termicide Manufacturer and as directed by the Department. 4) The treatment should be done by an agency specialized in the job having sufficient knowledge of anti termite treatment. 5) Five years guarantee from the date of completion of maintenance period shall be given by the contractor in the prescribed format of the department for the above anti-termite treatment work.
1200
-
-
... More
Providing and laying in position of plain cement concrete using hard granite broken stone in foundations, trenches etc. including mechanical mixing, ramming, compaction, leveling, curing, dewatering, if any including the cost of formwork etc., all complete as per specifications.
-
-
-
... More
1 : 1.5 : 3 (1 cement : 1.5 sand : 3 graded stone aggregate 25mm nominal size) .
44
-
-
... More
Providing and laying 75mm thick Base course under the flooring with cement concrete 1 : 2 : 4 using 25mm size hard broken stone including consolidation, formwork, curing etc., complete as per specifications.
1090
-
-
... More
Filling in depression with cement brick aggregate concrete 1:2:4 using 20mm size broken brick aggregate including compacting, curing etc., all complete upto Floor V level
7
-
-
... More
Providing, erecting, placing in position and removing Formwork for all insitu concrete works at all lifts and all shapes such as circular works, chamfers, splays, etc., using Steel / Plywood shuttering including centering, scaffolding, strutting, propping with necessary bracing in all areas, fixing of EPs, cutting holes and fixing pipe sleeves, applying of approved form oil over surface in contact with concrete, de-shuttering after specified curing period, etc., all complete as per drawings and specifications.
[Note : Measurement for the formwork shall be the area of forms in contact with concrete surfaces. Stop boards for construction joints will not be measured seperately for payment. Centering and shuttering where exceeding 3.5m height in one floor shall be measured and paid for seperately.]
-
-
-
... More
For Plain Surfaces upto 3.5m Lvl
1300
-
-
... More
For Plain Surfaces above 3.5m Lvl
1280
-
-
... More
Providing and casting insitu Reinforced Cement Concrete of the following grades of design mix by Weigh batching using machine crushed hard broken granite stone of nominal size 20mm including cost of admixtures in recommended proportion wherever required, mechanical mixing, transporting, placing at all lifts, vibrating, consolidation, curing, finishing smooth all exposed faces, for all insitu concrete items, etc., as per drawings and specifications.
Note :
1) The rate quoted shall be exclusive of reinforcement and formwork which will be paid for separately under relevant items.
2) The rate of concrete shall include the cost of admixture in recommended proportions as per IS 9103 as per direction of Engineer-in-charge.
3) Cement proportion for Concrete Mix shall be on the basis of weigh batching only as per design mix.
4) The cost towards any upward / downward variation required to obtain the specified strength over the minimum cement content will be paid for or deducted at the rate specified in Schedule 'F'.
-
-
-
... More
M 30 Grade Concrete (The Cement content considered is 370 Kg per Cu.m) - Upto FFL
255
-
-
... More
M 30 Grade Concrete (The Cement content considered is 370 Kg per cu.m) - above FFL and upto floor V
290
-
-
... More
Extra for finishing the fresh concrete pavement surface using vacuum dewatering system including vibrating the surface using screed vibrator, placing the filter mat, top mate, dewatering using vacuum pump, finishing the surface using power floater and power trowel, etc., all complete as per specification and as directed by the Engineer-in-charge.
800
-
-
... More
Providing, cutting, bending, placing and binding Steel reinforcement using TMT bars of Fe-500D grade in all reinforced cement concrete works including cutting, bending, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire, cost of cover blocks in C.M 1:2, etc., complete as per specifications and drawings.
Important Note: The required quantity of steel reinforcement as mentioned in the schedule should be procured by the contractor only of SAIL, Rashtriya Ispat Nigam Limited (VIZAG), TATA Steel & JINDAL from authorised dealers which shall conform to IS: 1786 (Latest Edition).
67
-
-
... More
Providing, hoisting and fixing in position of 50mm thickness of precast slabs in cement concrete 1:2:4 using hard broken stones of maximum size 20mm finished smooth of various sizes and patterns including necessary formwork and moulds, mechanical mixing, finishing the exposed surface, curing, fixing at all levels, grouting with CM / Cement grout wherever required, etc., all complete excluding cost of reinforcement which will be measured separately under relevant item as per specifications and as direction of the Engineer-in-charge.
12
-
-
... More
Providing and constructing brick masonry at all lifts using approved well cured flyash bricks (made as per IS 12894 or latest edition) in cement mortar 1:5 using crushed stone sand. (Flyash+crushed stone sand+ lime+ additive/cement with water proofing chemicals and accelerators) (non modular of class designation 5.0 ) with mortar in the ratio 1:1:4, where 1 part of flyash(IS 3812 or latest), 1 part of cement (IS 269 latest) and 4 parts of fine aggregate(IS 2116 latest), including suitable scaffolding, raking out joints, curing complete as per specifications and drawings for foundation, superstructure, etc. for the following floors.
-
-
-
... More
Upto FFL
40
-
-
... More
Beyond FFL to 3.00m Lvl
115
-
-
... More
Beyond 3.00m to 6.00m Lvl
95
-
-
... More
Beyond 6.00m to 9.00m Lvl
60
-
-
... More
Providing and constructing 110 mm thick brick masonry at all lifts for partition walls using approved well cured flyash bricks (made as per IS 12894 or latest edition) in cement mortar 1:4 using crushed stone sand. (Flyash+crushed stone sand+ lime+ additive/cement with water proofing chemicals and accelerators) (non modular of class designation 5.0 ) with mortar in the ratio 1:1:4, where 1 part of flyash(IS 3812 or latest), 1 part of cement (IS 269 latest) and 4 parts of fine aggregate(IS 2116 latest), including supplying and providing 2 Nos. of 6/8mm MS rod at every third layer, scaffolding, raking out joints, curing complete as per specifications.
140
-
-
... More
Providing and fixing in position of 230/110mm wire cut brick masonry using wire cut bricks of approved make in Cement Mortar 1:4 (1 Cement: 4 Coarse sand) in all shapes and sizes including scaffolding, curing, raking out joints, sunken pointing the joints using suitable sealents of brick colour, etc., all complete as per specifications and as directed by Engineer-in-charge.
13
-
-
... More
Providing and fixing in position of Terracota Jaali of size 300 x 200 x 100 mm of make Nuvocotto (Edan Series) or other approved equivalent make including fixing the jaali with approved adhesive, pointing the joints with approved sealents of jaali colour/shade, scaffolding, transportation, curing, at all lifts etc., all complete as per the specifications and as directed by the Engineer-In-Charge.
(Note: The Terracota Jaali shall be got approved by the Engineer before making bulk order.)
13
-
-
... More
Providing and fixing Marble / Granite work gang saw cut mirror polished, (pre moulded and prepolished slab) machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1 : 4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment, epoxy touch ups, etc., including rubbing, curing, finishing, providing holes of required diameter, providing opening to fix counter basins, providing grooves wherever required, etc., all complete at all levels as per specifications.
(Note: The marble/Granite stones slab shall be got approved by the Engineer before making bulk order.)
-
-
-
... More
Granite - Ruby red/Jet Black (16 - 18mm thick)
30
-
-
... More
Supplying and fixing 20mm (±2mm) thick both side polished Kota Stone slabs for Shelves in Cupboard/Wardrobe/Shoe rack, etc., including fixing by cutting a chase of appropriate width with cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specifications and as directied by Engineer-in-charge.
(Note : Kota stones shall be got approved by the Engineer before making bulk order)
13
-
-
... More
Providing and fixing pressed steel door frames of make Steeltech or NCL Seccolor or SIGNUM conforming to IS: 4351 manufactured by roll formed using 1.6mm thick Galvanised steel sheets including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including provision for fixing steel butt hinges with mortar guards, lock strike plate and shock absorbers as specified including applying one coat of approved etch primer after pre-treatment of the surface and painting the exposed surfaces with two coats of anticorrosive paint of approved make and colour, filling the hollow of door frame and hold fast pocket of size 230x115x150mm with CC 1:2:4 using 12mm downgraded stone aggregate etc., all complete as per specification and as directed by Engineer-in-charge.
-
-
-
... More
Profile A - 90 x 60 mm Single rebate
10
-
-
... More
Providing and fixing Wardrobe, built-in cupboard shutters, drawers, etc., fabricated from roll formed sections made of Galvanized Steel Colour Coated/Powder Coated (Base Steel as per IS 513 “D” quality, Galvanized as per IS 277 with Zinc of 120 grams/ Sq. Mtr.) of TATA / JINDAL or approved make with total coated thickness of 0.58 mm as detailed below:-
Dimensions of Sections:- External frame section shall be of 48mm x 50mm x 0.58mm thickness, mullion section shall be of 48mm x 50mm x 0.58mm thickness, shutter section shall be of 47mm x 20mm x 0.58mm thickness and beading section shall be of 12mm x 12mm x 0.58mm thickness. Paint specifications:- Coated Sections shall be with Primer Coat of Epoxy Primer of 5-7 microns thick, finish painted with a Polyester Paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns, or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Fixing Details: The frame & Shutter Sections shall be cut to length and mitre joined with Corner Bracket made of polypropelene. Mullion Section shall be joined with Frame / Mullion using Nylon / polypropelene Mullion Cap, Ethyl Propylene Diamine Monomer (EPDM) Gasket shall be used all around glass/ particle board in shutter, between frame and glazed shutter and both sides of fixed glass.
-
-
-
... More
Accessories: Each shutter shall be provided with one set of S.S pivot hinges, Handle made of high grade Aluminium powder coated with nylon receiver. Gaskets made of Ethyl Propylene Diamine Monomer (EPDM), Aluminium 'T' section of 1.2mm thick for double shutter joint, 90mm aluminium hasp and staples for wardrobe shutters, etc.,
Panels:- Glass shutter and fixed glass portions should be provided with a glass of 4mm Plain Tinted Glass of make Saint gobain or other approved equivalent make. Wardrobe / cup board shutter shall be provided with 6mm thick both side laminated cement bonded particle board of Bisonlam or approved equivalent make Frame should be fixed to brick / concrete masonry by using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames.
Profile A - 90 x 60 mm Single rebate
13
-
-
... More
Providing and fixing in position of 12mm thick Cement bonded pre-laminated particle board of `Bison Lams' or approved equivalent make panels prelaminated with decorative lamination on both sides for door shutters, partitions, cupboard shutters, sliding shutters, etc., including cutting to required shape and size, making as per drawing with Anodized aluminium frame alround with lock rails at the centre for each leaf, fixing in structural opening, providing teakwood lipping alround for sliding shutters, etc., all as per specification and as directed by the Engineer-In-Charge. (Note:- Aluminium frame work will be paid for seperately under relevant item.)
15
-
-
... More
Providing and fixing Sliding glass door Notice board of approved size of make Schoolneeds or Corporate Concepts or Alkosign made up of anodized aluminium frame work along with 5mm thick clear float glass of “SAINT COBAIN” or approved equivalent make for sliding door including providing sliding arrangement, star locks, 12mm thick soft board covered with colour (blue / maroon) blazer / flannel cloth backed with PVC sheet, providing clamps at the back side for wall mounting, etc., all complete as directed by Engineer-in-charge.
3
-
-
... More
Supplying, fitting, fixing in position of 5mm thickness Tinted glass of approved colour of "Saint Gobain" or approved equivalent make for doors, partition, windows, fixed glazing, louvers, etc., including fixing with putty, TW beading, Neoprene gasket, etc., all complete as per drawing and specifications.
60
-
-
... More
Providing and fixing Dual Reflective Sun Control Film of Garware or approved equivalent make over the existing windows including cleaning the glass, pasting the films over glass without void / air gaps using approved adhesive, cleaning, etc., all complete as per manufacturer specification and as directed by Engineer-In-Charge.
30
-
-
... More
Providing and fixing in position Aluminium partitions, doors, windows, ventilators, louvers, fixed glazing, sliding windows north light glazing, sliding shutter 'E' Channel, trellis, etc., using heavy duty standard anodized aluminium extruded sections, anodized aluminium sheets as per relevant IS code of "JINDAL" or approved equivalent make including pivots, approved door and window handles, door stopper, EPDM gasket, neoprene gasket lining, stainless steel screw, mastic filling, weather strips, washers, reinforcing the door shutters at top and bottom with MS rod threaded and fixed to vertical members, etc., as required and as per drawing etc., all complete at all heights and as directed by the Engineer in charge.
Note:- 1. Payment shall be made on the basis of weight of aluminium members/section fabricated and actually installed in position without extra allowance for wastage no extra payment shall be made for non-aluminium consumable items like screws, gasket, weather strips PVC/Neoprene lining, sliding wheels for windows, in built tower bolt, reinforcing rods, etc.,
2. Glazing, particle boards, Aluminium grills, mesh etc., will be paid separately under relevant items. 3. All fittings except under Note-1 will be paid seperately under relevant item and the fittings shall be of matching colour anodized aluminium sections. 4. The aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cleat angles at no extra cost. 5. The aluminium section shall be anodized with "MATT FINISH" (15 micron thick) finishing and of approved shade / colour with the approval of Engineer-In-Charge.
1390
-
-
... More
Supplying, fabricating bending and fixing the position of AISI 304 grade stainless steel section for hand railing/hanger rods made of Hollow tubes, channels, plates, etc., of required size including butt / mitre welding, grinding, buffing, polishing, making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement, drilling holes in floor/walls embedding/ grouting with suitable grouting materials, etc., all complete as per drawing and specification and as directed by Engineer-In-Charge.
Note:- 1. The stainless steel tubular pipe/ section shall conform to ASTM A554/A312.
2. All welding joint shall conform to V groove joint and joint shall be ground finish.
3. There shall not be any spatter or imperfection on the pipe and the pipe surface shall be ground and smooth.
4. External surface of SS pipe shall be buffed to mirror finish. 5. The rate shall be inclusive of providing ball joiners, flush joiners, base plate/flanges, cover plate, end caps epoxy glue, round face/square face glass connecters for fixing etched colour glass if any of required size with gaskets including curved railings where ever required cost of screws, weld etc., 6. The entire pattern of stainless steel hand railing work/pattern including fixing of etched glass, if any in the hand rail shall be got approval by Engineer in charge/Achitect before execution.
7. Only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc., for payment purpose.
610
-
-
... More
Supplying and fixing in position single leaf/double leaves of the 35mm thickness of ISI marked non decorative type factory made flush door shutters having solid hardwood block board core with commercial facing on both sides, internal teakwood lipping (Internal lipping shall have a total depth of not less than 25mm) using second class teak wood on all four sides, phenol bonded, hot pressed, conforming to IS: 2202 latest edition, of various sizes with necessary test certificate as per drawings and specifications. Note: 1) Cost of Door frame shall be paid for separately under relevant item.
2) The width of the frame including lipping shall not be less than 45mm and not more than 75mm.
4
-
-
... More
Providing Vision panel of size 150x200mm in WPC door / Solid core flush door shutters with 4mm thick clear float glass of approved make including cutting the door shutter to required shape and size, fixing glass with TW beading alround, etc., all complete as per specification and as directed by Engineer-In-Charge.
2
-
-
... More
Supplying and fixing factory made approved PVC solid door frame and panelled PVC door shutter with furniture fittings as detailed below as per specification and as directed. i) Door Shutter The door shutter shall be of 28mm thick factory panelled door of make Accucel or other approved equivalent make using solid PVC frame profile with integral FP-7114 as frame and 3mm thick H.P.L (high pressure compact laminated) as in fill, including the shutter frame shall be reinforced with 39 x 19 x 0.6mm thick GI - C stiffner alround in between FP - 7114, providing telescopic polymeric L corner at four corners, providing 75 x 38 x 18mm Zinc coated MS - C clamp at lock rail joint, providing FP - 1208 beading alround the HPL infill, the joints shall be made by SP 5 epoxy seal and fevikwick, etc., as per manufacturer specification. ii) Fittings:- The door shutter shall be fixed with the following hardware fittings.
a) 4 Nos. of 75 mm long stainless steel butt hinges of GARG brand bearing ISI mark with suitable stainless steel screws.
b) Two numbers of 125mm long anodised aluminium D handle of make Classic/CLASSIC or approved equivalent as per IS - 208 bearing ISI mark with suitable CP screws.
c) Two numbers of 75mm long anodised aluminium baby latch type tower bolt with suitable CP screws.
d) One number of 50mm long solid PVC door buffer with 75mm long CP screws. Note: 1) All furniture fittings shall be of approved quality and make. 2) The rate quoted shall be inclusive of fixing of door shutters with required hardware fittings as detailed above. 3) The rate shall be inclusive of dismantling of existing damaged door shutter and disposal of dismantled materials at GSO store.
18
-
-
... More
Providing and fixing IS : 12817 marked Stainless steel butt hinges (Heavy weight) of size 125 x 65 x 2.50mm of make GARG or approved equivalent make including fixing with suitable stainless steel screws, etc., complete.
8
-
-
... More
Providing and fixing of 100 x 63 x 4mm Aluminium butt hinges conforming to IS : 205 of make 'Classic or Crown' or approved equivalent make including anodised transparent or dyed to required colour or shade, fixing with necessary CP screws, etc., all complete as per specification.
54
-
-
... More
Providing and fixing IS:208 marked Aluminium handles of size 125mm x 12mm dia. of make 'Classic or Crown' or approved equivalent make including anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade, fixing with necessary SS screws etc., all complete as per specification.
13
-
-
... More
Providing and fixing of 250 x 16 mm ISI marked Aluminium sliding door bolts (Aldrops) of 'Classic or Crown or Global ' or approved equivalent make as per IS 2681 including anodised transparent or dyed to required colour or shade, fixing with 5 Nos of clip and staple with necessary CP screws etc., all complete as per specification.
13
-
-
... More
Providing and fixing anodised Aluminium hook and eye of 250mm long with suitable screws.
13
-
-
... More
Providing and fixing 300mm long plate fixed with three / four prong type anodised aluminium robe hooks of approved make with suitable screws.
11
-
-
... More
Providing and fixing Anodised aluminium hanging type door twin rubber stoppers of required colour or shade including fixing with necessary screws etc., all complete as per specifications.
13
-
-
... More
Providing and fixing 50mm long and 40mm dia. PVC solid door buffer with 75mm x 10mm SS screws and cup washers.
13
-
-
... More
Providing and fixing Sliding window latch for sliding windows of make EBCO or other approved make including fixing with necessary screws as directed by the Engineer-in-charge.
14
-
-
... More
Providing and fixing Stainless steel Roller wheels of approved quality and make for aluminium sliding door shutters including fixing as directed by Engineer-In-Charge
4
-
-
... More
Providing and fixing in position universal Hydraulic door closer bearing ISI mark of EVERITE/GODREJ or approved equivalent make as per IS:3564 (Type-B No.2) including fixing as per specifications.
13
-
-
... More
Providing and fixing double action hydraulic floor spring of "HARDWYN" or "GODREJ" or approved equivalent make with ISI mark, pivoting and all other arrangements including cost of cutting floor, SS cover plates with brass pivots & other necessary accessories required for the work to facilitate smooth operation of the door shutter etc., all complete as directed by the Engineer-in-charge.
4
-
-
... More
Supplying, fabricating and fixing Steel Grills of required pattern and size for Windows/Ventilators, Staircase Hand Rails, etc., fixed to openings/wooden frames at site, comprising of MS square bars / MS rounds / MS flats, etc., including fixing with necessary wood screws for fixing grills / by welding in steel windows, painting with two coats of anti corrosive paint of approved colour and make over a coat of red oxide zinc chromate primer/ zinc phosphate primer, etc., all completed as per specification.
[Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedment's for fixing the steel works.]
730
-
-
... More
Supplying, fabricating and fixing of EPs, Structural Steel work and pipe sleeves etc., at all lifts comprising MS angles, MS plates, tees flats, rounds, squares, other structural steel sections, pipe sleeves and pipes of various sizes, IS channels, IS beams, square rods, etc., of TATA or SAIL or approved equivalent make including cutting, welding, bending to shape, painting exposed faces with two coats of anti-corrosive paint of approved colour over a coat of red oxide zinc chromate primer / zinc phosphate primer, embedding with Cement concrete, etc. complete all as per specifications and drawings.
Note: The rate shall be inclusive of lifting arrangements if any required to hoist and concrete embedments for fixing the steel works.
4850
-
-
... More
Supplying, erection in position rolling shutter including assembling fitting and fixing standard steel rolling shutters of pull and push type conforming to IS:6248 with all accessories such as slide guide channel with stiffeners, bracket, plate, Pulley, U-clamp, Spring and pipe shaft, lock plate, pulling hook, sliding lock, roller ball bearings, curtain shall be built up of interlocking MS lathe section formed from cold-rolled steel strips of 1.20mm thickness and 75mm wide, gear, pulling hook handle with necessary fittings and locking arrangements on both ends including 1.25mm thick MS hood cover, galvanising the lathe section, guide rails, bottom plate, hood cover, bracket plate and suspension shaft, painting two coats of anti-corrosive paint of approved colour and make over a coat of red oxide zinc chromate primer / zinc phosphate primer, etc., all complete as per specification, drawing, and as directed by the Engineer for various structural openings. (Note: Actual area of opening only shall be measured and paid). .
9
-
-
... More
Supplying, fabricating and fixing weld mesh panel of required size for windows, ventilators, etc., by using 25mmx25mm square aparture weld mesh made by steel wire dia not less than 3mm including the cost of welding, screws for fixing necessary fittings and fixers, painting with two coats of anti corrosive paint of approved colour and make over a coat of zinc chromate primer, etc., all completed as per specification. Note:- The mild steel rolled section like angles, flat required to fabricate the weld mesh panel will be paid separately under the relevant item.
25
-
-
... More
Providing and laying Indian Patent Stone flooring of 20mm thick with cement concrete 1:2:4 (1 Cement: 2 Coarse sand: 4 graded stone aggregate) finished with a floating coat of neat Cement using 20/10mm and below size hard broken stones including laying in panels, cement slurry, consolidation, curing, rubbing the surfaces smooth etc., all complete as per specification.
210
-
-
... More
Providing and fixing glass strips in joints of terrazzo / IPS flooring using 40/20mm wide & 4mm thick glass strips including grinding the top surface smooth to match with the floor, etc., complete as per specifications.
630
-
-
... More
Providing and fixing 14-16mm thick White Agaria Marble Stone slab table rubbed, exposed edges rounded and polished of required size and fixed in urinal partitions, shelves above wash basin, etc., by cutting a chase of appropriate width with chase cutter and embedding the stone into the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) finished smooth, front face polishing, rounding the edges, etc., all complete as per specification and as directied by Engineer-in-charge.
5
-
-
... More
Providing and fixing Granite stone in Flooring with 16-18mm thick one side Leather finished granite stone slab of approved shade, colour, size and texture laid over 20mm (average) thick base in cement mortar 1 : 4 (1 cement : 4 coarse sand) including laying, chamfering, providing grooves where ever required, pointing the joints with approved grouting materials, curing, cleaning, polishing, etc., all completed as per drawings and specification.
Note : The Granite stones shall be got approved by the Engineer before making bulk order. The rates for steps shall be inclusive of providing three Nos. of 4mm grooves @ 25mm interval on all the treads from the nosing edge.
-
-
-
... More
Ruby red/Pitch black for Flooring
50
-
-
... More
Ruby red/Pitch black for Steps riser and treads using single piece of length upto 2mtr.
12
-
-
... More
Providing and laying Kota stone slab in Flooring with 20-25mm thick Kota stone of required size of approved shade and texture laid over 20mm (Average) thick base of cement mortar 1 : 4 (1 cement : 4 sand) and joints treated with grey cement slurry mixed with colour pigments to match the shade of the slab including curing, rubbing and polishing in three levels to obtain mirror polish, waxing to give smooth finish, etc., all complete at all levels as per specifications.
160
-
-
... More
Providing Half Round Edge Moulding to 16-18mm thick marble / Granite or 20mm thick Kota stone counters, vanities, sills, etc. including machine polishing the edges to give high gloss finish etc., all complete as per specifications and as directed by Engineer - in – charge.
-
-
-
... More
Granite work
90
-
-
... More
Kota stone work
20
-
-
... More
Providing and laying first quality Jointless polished Vitrified tiles (Italian marble series) of size 1200x600mm and 15mm thick with water absorptions less than 0.08% conforming to IS: 15622 of make SOMANY or KAJARIA or JOHNSON for flooring and skirting in all colours, shades and design of approved pattern including setting over base layer of 20mm thick in cement mortar 1:4, jointing with grey cement slurry @ 3.3 kg per sqm or by using tile adhesive of approved make, grouting the joints with epoxy based joint filling material or other equivalent jointing materials, curing, cleaning the surface with acid wash etc., all complete as per specification and as directed by Engineer in charge. (Note:- The sample shall be got approved by the Engineer-in-charge before making bulk order)
50
-
-
... More
Providing and laying 1st quality Rectified (Jointless) Ceramic floor tiles (Glazed or Anti-skid) of size 300 x 300 mm or more confirming to IS : 15622 of KAJARIA (Approved concept of Digital Series) or SOMANY (Digital Series - Glasstra) or JOHNSON (Approved concept of Satin & Rustic / Glossy series) or other approved make in all colours, shades in Floors laid over 20 mm thick cement mortar 1 : 4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry @ 3.3 kg per sqm or by using Cement based high polymer modified quick set tile adhesive (water based) or other approved tile adhesive including grouting the joints with white cement and matching pigments etc., all complete as per specification.
70
-
-
... More
Providing and fixing 1st quality Rectified (Jointless) Glazed ceramic wall tiles of approved concept series confirming to IS 15622 of "KAJARIA/ SOMANY / JOHNSON" or other approved make in all colours, shades of following sizes in Skirting, Risers of steps and Dados laid over 12 mm thick bed of cement mortar 1 : 3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm or by using Cement based high polymer modified quick set tile adhesive (water based) or other approved tile adhesive including providing Motiff tiles, pointing in white cement mixed with pigment of matching shade, curing, etc., all complete as per specifications and as directed by Engineer-in-Charge.
-
-
-
... More
Wall tiles of 300x600 mm or more [KAJARIA (Digital Series) or JOHNSON (Satin &Rustic / Glossy series)]
170
-
-
... More
Supplying and fixing of Rigid PVC nosing of approved quality and colour at the corners of Ceramic tiles dadooing including finishing all complete as directed and as per specifications.
90
-
-
... More
Providing and laying of Maple wood sports flooring of Sports Hub / NUPIN / RICOCHET or approved make as per Badminton World Federation (BWF) standards including fixing over the finished floor surface as per manufacturere specifications and as direcetd by Engineer-in-Charge. Note:- a) The under frame:- Made of pine wood runners of 70mmx45mm, treated with anti-termite solution and fixed on the bottom side with 10/19mm thick Rubber air cushioned pads, stappled through the two wings at 300mmx300mm. The floor surface shall be treated with vapour barrier and the runners having air cushion pads to be placed on the vapour barrier in perfect level at 350mm in 1 direction. b) Finish: - The surface board shall be screwed to the runner through the tongue only and lock to the screwed tongue by the groove of adjoining board. Ends of the boards shall be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion of 15 to 20 mm shall be left open between the wooden flooring surrounding tiled area / walls. After installation the floor will be machine sanded in uniform level and finishing with P.U. Polishing and water based polyurethane lacquer. c) Marking:- Game line marking shall be carried out in required colors before applying the finishing coat. d) Warranty: A warranty bond shall be executed for the period of 5 years from the date of defect liability period.
830
-
-
... More
Supplying and laying of one course of Vitrified Cool Roof tiles over roof slab / sloped surface of terrace and skirting using tiles of size 300x300mm and 10mm (±5%) thickness of make SOMANY (or) JOHNSON (or) PAVIT or approved equivalent make and conforming to IS: 15622 (Group B1a (or) Group B1b) approved colour with SRI (Solar Reflectance Index) 78, Solar reflection 0.70 & initial remittance 0.75 laid on 20mm thick bed on Cement mortar 1:4 mixed with integral water proofing admixture including removal of dead mortar from roof slab, cleaning the surface, exposing floor & wall function along parapet and column if any, sealing the floor & wall junction with water proofing mortar, laying screed concrete in CC 1:2:4 to form slope and haunch portion along parapet, if any required including laying tiles with required slope as per manufacturer specification, grouting the joints with approved tile grout, etc., all complete as per manufacturer Specification and as directed by Engineer-in-Charge. (Note: - Cost of screed concrete in CC 1:2:4 and bond coat will be paid for separately under relevant item.)
170
-
-
... More
Providing and applying SBR based bond coat of make MC Bauchemie (Naufufill-SBR) or FOSROC (Nitobond SBR) or FAB Chemical (Mixbond SBR) or Bostik (Boscocem 475) or other approved make including preparation of surfaces by scrubbing / cleaning the fungus / stains, cleaning with water, filling the cracks with approved crack filler and including cost of all materials, labour, tools and plants, curing, scaffolding at all lifts, etc., all complete as per specifications and as directed by Engineer-In-Charge. (Note: Mixing ratio of chemicals, consumption and application shall be as per manufacturer specifications.)
170
-
-
... More
Providing and laying Cementitious water proofing treatment system comprising of bond coat, top screed concrete including preparation of surface by removing the existing loose surfaces, cleaning the surface by washing throughout, filling the cracks if any using approved crack fillers, applying bond coat, finishing the top with 20mm thick IPS flooring with water proofing admixtures, leak test, curing, etc., all complete as detailed below as per manufacturer specifications and as directed by the Engineer-in-Charge.
i) Crack Treatment: Making 'V' groove (upto 6mm depth and 6 mm width) along the surface cracks, cleaning the surface by sprinkling water to remove all the loose particles, dust and filling the cracks with Polymer modified cementitious crack sealer of make FAB Chemical (Mixbuild GP) or Bostik (Crack fill). Mixing ratio, consumption and application procedure shall be as per manufacturer specifications.
ii) Bond coat : Applying Base primer bond coat with of make FAB chemical (Mix Bond SBR) or Bostik (Boscocem 475) over the existing surface. Mixing ratio, consumption and application procedure shall be as per manufacturer specifications.
iii) IPS flooring with water proofing admixture : After applying one coat of bond coat (within 30 minutes) while bond coat is in tacky condition, laying of Indian Patent Stone Flooring (IPS) with cement concrete 1:2:4; 20mm thick using 10mm and below size hard broken stones shall be commence which is mixed with integral water proofing of make FAB chemicals (MIX BOND AC) or Bostik (HYDROMENT 476) and mixing of fibre reinforcement of approved make as per manufacturer specifications. After completion of surface finishing, control joints (Groove) shall be provided with suitable groovers. Application procedure shall be as per manufacturer specifications and as directed by the Engineer-in-Charge. Note:- This treatment should be done by an agency specialized in the job having sufficient knowledge of waterproofing treatment, authorized trained applicator should be used to carry out the work.
100
-
-
... More
Designing, manufacturing and erection of Self supported Steel roofing system (Trussless) over a span of 25Mtr of make Proflex or other approved make confirming to IS 15965/ASTM A792M made up of with pre-painted galvalume coated steel sheet of 1.4mm (± 0.02mm) base metal thick having coil width of 912mm (± 2mm) and 1.5mm (± 0.02mm) after paint thick of Grade-D (Min 350MPa Yield strength) and coating mass 150AZM including fabricating the roof profile as per design, errecting using cranes, fixing using required fasteners/ SDS wahers, epoxy paint laquer, necessary overlappings/crimping, providing necessary electrical hangers to fix electrical fittings (Approximately each electrical hangers around 25 kg) at every across 1.5m length and 3m along length, flashing by folding bottom sheet to cover the puff portion at the exposd edges/ ends, fixing rain water gutters lower ends, trimming, cutting to profile foam fillers etc., all completed as per manufacturer specification and as directed by the Engineer-in-Charge. Note:-
1) Only exposed area without overlapping will be measured for payment. 2) Design report shall be submitted and vetted by the Department well in advance before commencing the manufacturing of Zinc Alu sheets. 3) Required provisions for installation of solar panels over the roof and provision of routing of conduits shall be provided in the roof sheets and the same may be duly approved by the Department. 4) The above work should be done by specialized agency having sufficient knowledge in trusless roofing system.
1220
-
-
... More
Providing and fixing of Self Supported Galvalume Cladding system for Gable end area with pre-painted galvalume coated steel sheet of 0.8mm (± 0.02mm) base metal thick having base coil width of 610mm (± 4mm) profiled to 305mm (± 10mm) and 0.85mm (± 0.02mm) after paint thick of Grade-D (Min 350MPa Yield strength) and coating mass 150AZM confirming to IS 15965 including mechanically seamed manufactured by MIC Hydraulic Machines to profiles, fixing top and bottom using required fasteners/ SDS wahers over the structural steel support, epoxy paint laquer, proper overlapping and seaming between different sheets without making holes or preventing the overturning the roof by wind addition, etc., all completed as per manufacturer specification and as directed by the Engineer-in-Charge. Note:-
1) Only exposed area without overlapping will be measured for payment.
2) The rate of item is including fitting as per standerd specification.
3)The vendor shall give windload calculation before start of the work and the vendor shall be entirely responsible for the damage of the same during transport and installation.
4) The above work should be done by specialized agency having sufficient knowledge in trusless roofing system.
170
-
-
... More
Plastering the ceiling / exposed surfaces of concrete with CM 1:3; 6mm thick to make the surface uniform, free from undulations and imperfections including hacking pock marking of surfaces with pointed tool, scaffolding, curing at all lifts etc., all complete as per specifications and as directed by Engineer-incharge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement]
490
-
-
... More
Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on internal faces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-incharge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement]
1770
-
-
... More
Plastering with Cement Mortar 1:5, 12mm thick for brickwork / Concrete on its external faces at all lifts including scaffolding, curing and forming grooves wherever necessary all complete as per specifications and as directed by the Engineer-incharge. [Note: 6mm premium glass fibre of make Dugar & Co or Recron shall be mixed with Cement @ 60 gms of glass fibre per 50kgs of cement]
1800
-
-
... More
Providing Raised Cement Mortar bands with plain cement mortar 1:3 for elevational purpose over parapet, sunshade, RCC drop, etc., at all levels including hacking pock marking of concrete surfaces with pointed tool, scaffolding, curing and forming grooves wherever necessary, etc., all complete as per drawing & specifications and as directed by Engineer-In-Charge.
(Note : Rate shall be quoted for 1 mtr long and 1 cm wide band. Length will be measured in running metres, width of the band will be measured in CM and the quantity shall be calculated in metre-cm units)
-
-
-
... More
12mm thick 75mm depth Raised Cement Mortar bands
150
-
-
... More
Supplying and fixing in position of Alkali resistance Glass fibre mesh (4-5mm square aperture with 145 gsm) over the joints of RCC and Brick work with cement paste before plastering as directed by Engineer-in-charge.
190
-
-
... More
Painting all internal faces of walls / ceiling plastered surfaces with two coats of Acrylic Emulsion paint of make Asian (Tractor) / Berger (Bison) or other approved equivalent make of approved shade over a coat of interior wall primer of make Asian (Professional) / Berger (BP Primer) or other approved equivalent make including preparation of surfaces, applying the primer coat, scaffolding, etc., all complete at all lifts as per specifications.
440
-
-
... More
Painting all internal faces of walls / plastered surfaces with two coats of Acrylic Emulsion paint of make Asian (Tractor) / Berger (Bison) or other approved equivalent make of approved shade over a coat of interior wall primer of make Asian (Professional) / Berger (BP Primer) or other approved equivalent make including preparation of surfaces, applying approved make wall care putty as per manufacturer specification, sanding the surface, making surface smooth without porous, applying the primer coat, scaffolding, etc., all complete at all lifts as per specifications.
1770
-
-
... More
Providing Painting over all exposed surfaces at all heights over rough cast plaster/plain plaster with Two Coats of premium exterior emulsion paint of make Asian (APEX - Dust proof exterior emulsion) / Berger (Anti dustt weather coat) or other approved equivalent make of approved shade over a coat of exterior wall primer of make Asian / Berger or other approved equivalent make including preparation of surfaces, curing, scaffolding etc., all complete as per specifications.
-
-
-
... More
Painting over Plain Plaster at all lifts.
1850
-
-
... More
Painting External wall with Textured paint of approved pattern/ finish in three coats (One coat of Texture and two coats of External paint) over a coat of external primer of approved colour and texture of make "Berger (Walmasta) or Asian" (Apex Duracast) or approved equivalent make at external surface at all levels and height including preparing the base surface, sand the surface with sand paper, wash and scrub with coir/wire brush, attending to broken edges /corners or patches of plastered surface with cement grout, scaffolding, staging, painting one coat of Weather coat External primer of make Berger or other approved make, application of illusion texture using Berger- Walmasta exterior texture or other approved make, making approved patterns/designs using trowel/ roller, providing vertical/horizontal grooves if any required, painting the top surface with two coats of overcoat using weather coat exterior emulsion of make Berger (Weather coat smooth) or other approved make, cleaning the surface etc., all complete as per manufacturer's specification and as directed by Engineer-in-charge.
180
-
-
... More
Painting for wood work with two coats of synthetic enamel paint of approved colour and make over a coat of primer over new wood work suitably prepared for receiving the primer and paint by scraping, rubbing, applying wood filler, wood putty, making surface smooth, etc., as per specifications.
8
-
-
... More
Art Painting at external wall with indoor games theme of approved design as detailed below including preparation of surfaces by applying the primer coat, applying one or more coats of approved make wall care putty if required, making surface smooth without porous by sanding, applying two coats of (APEX - Ultima Protek) / Berger (Weather coat Long Life 10), making hand art of approved theme/drawings, finishing the art/painting, scaffolding etc., all complete at all lifts as per specifications and as directed by Engineer-In-Charge.
1) Preparing the surface and applying one coat of primer Smartcare Damp Sheath Exterior primer / Berger HS Dampstop Elasto of make Asian or Berger or other approved equivalent make.
2) Applying one or more coats of approved make wall care putty, making surface smooth without porous by sanding, removing the dust, making surface ready for applying top coat.
3) Applying two coats of Exterior painting using Asian (APEX - Ultima Protek) / Berger (Weather coat Long Life 10) or other approved equivalent make of approved shade. Colour and design shall be as per approved concept/ theme.
4) Hand art painting of approved theme as per design and manufacturer specification. Indoor game theme like - Badminton, basket ball, chess etc., of make Asian or Berger or other approved make shall be used.
5) Painting over the preparation of surface with one or more coat of Exterior emulsion paint of make Asian (APEX - Ultima Protek) / Berger (Weather coat Long Life 10) or other approved make using suitable brush, cotton or roller as per manufacturere instructions.
6) After completion of drawing one coat of clear PU shall be applied over entired painting/art area and cleaning the floor surface etc.
(Note : The painting shall be done with specialised manpower having sufficient knowledge in art painting)
95
-
-
... More
Providing and fixing in position of white glazed vitreous china ware ORISSAPAN water closet of size 580x440mm of PARRYWARE/ HINDWARE or approved equivalent make with "S" or "P" trap with all jointing materials including making holes in masonry, fixing the Orissapan, joining the pipe and trap with Lip Ring of "PRINCE" of approved make, reconstructing the same, encasing the pan and trap with brick jelly concrete 1:2:4 and back filling extra space with river sand/brick jelly concrete, all as per specifications and as directed by the Engineer-in-Charge.
2
-
-
... More
Providing and fixing high level/Low level polymer DUAL flushing cistern of 3/6 litres capacity of make "PARRYWARE/ HINDWARE model SLIMLINE" or approved equivalent conforming to IS: 7231 including fixing cistern at required height and level with necessary TW wall plugs, screws, connecting inlet and outlet, connecting the cistern and closet with suitable dia. PVC pipes and fittings conforming to IS:4985 etc., complete as per standard specifications.
2
-
-
... More
Providing and fixing in position of white glazed vitreous chinaware European type water closet comprising of:
i) White glazed vitreous chinaware European Water Closet of "Parryware (Niagara)" or approved equivalent make including fixing with necessary plugs, screws and packing the joints with cement mortar 1:1, joining the pipe and trap with WC pan connector of Ashirvad or approved equivalent make etc., all complete as per specifications and as directed.
ii) White Solid Anti-microbial seat cover of "Parryware" or approved equivalent make including fixing.
iii) High level/Low level polymer Dual flushing cistern of 3/6 litres capacity of make "PARRYWARE model SLIMLINE" or approved equivalent make conforming to IS: 7231 including fixing cistern, connecting the cistern and closet with Flush bends, PVC pipe, WC pan connector of Ashirvad or approved equivalent make, cup bush washer, etc.,
Note: (i) Tenderer shall note that the cost quoted shall be inclusive of all materials like EWC, Seat Cover, Flushing Cistern, flush bends, etc., (ii) All the above items for quality colour and make shall be got approved before making bulk order.
4
-
-
... More
Providing and fixing in position best vitreous China Wash Basin comprising of:
i) White glazed vitreous China ware wash hand basin of size 560x440mm Inoya / 550x450mm Indus/ 550x400mm Oxford of Parryware or approved equivalent make fixed with Multi purpose rag bolt or painted CI brackets.
ii) 32mm heavy quality PTMT waste coupling of Prayag or approved equivalent make, washer, check nuts.
iii) 15mm heavy quality PTMT Pillar cock of make PRAYAG or approved equivalent make.
iv) 32mm PTMT Bottle trap (Prayag or equivalent make) Note: (i) Tenderer shall note that the cost quoted shall be inclusive of all materials like wash basin, waste coupling, pillar cock, Bottle trap, nails, screws and plugs which are necessary for fixing including cost of labour.
(ii) Quality, colour and make for all the above items shall be got approved before making bulk order.
9
-
-
... More
Providing and fixing in position of vitreous Chinaware urinal comprising of :
i) Urinals of "Parryware (New Magnum)" or equivalent make with suitable CI brackets/MS clamps.
ii) 32mm PTMT urinal domed waste coupling of make Prayag or equivalent make.
iii) 15mm PTMT spreaders of make Prayag or equivalent make and connection as directed.
iv) 32mm PTMT Bottle trap of Prayag or approved make .
v) 15mm PTMT Urinal push cock of make Prayag
Note:- (i) Tenderer shall note that the cost quoted shall be inclusive of all materials like urinal basin, waste coupling, spreader, bottle trap, push angle cock, nails, screws and plugs which are necessary for fixing including cost of labour.
(ii) All the above items for quality, colour and make shall be got approved before making bulk order.
4
-
-
... More
Providing and fixing 5mm thick mirrors of "SAINT GOBAIN" or approved equivalent make of approved size backed with 4mm thick AC sheet or marine plywood including 30x20mm aluminium frame works, painting with two coats of enamel paint over one coat of primer for backing sheet, fixing in frame work with gasket, fixing firmly against brick wall with suitable clamps, etc., all complete as per specification and as directed by Engineer-in-charge.
3
-
-
... More
Providing and fixing heavy quality 600mm CP Towel rail of approved make with wall flange including suitable CP screws all complete as per specifications and as directed by Engineer-in-charge.
10
-
-
... More
Providing and fixing heavy quality Brass GRAB bar 450mm long of approved make with wall flange including suitable screws all complete as per specifications and as directed.
1
-
-
... More
Providing and fixing heavy quality 15mm PTMT Long body screw down Bib Cock with wall flange of 'PRAYAG' or approved equivalent make including fixing with suitable valve/cup, flange etc., all complete as per specification.
3
-
-
... More
Providing and fixing heavy quality 15mm PTMT Bib Cock with wall flange of 'PRAYAG' or approved equivalent make including fixing with suitable valve/cup, flange etc., all complete as per specification.
2
-
-
... More
Providing and fixing heavy quality 15mm PTMT Angle Stop Cock with wall flange of 'PRAYAG' or approved equivalent make including fixing with suitable valve/cup, flange etc., all complete as per specification.
15
-
-
... More
Providing and fixing heavy quality 15mm C.P. Brass screw down Concealed type stop cock extra heavy body with adjustable wall flange conforming to IS-8931 and bearing ISI mark of approved make including fixing with suitable SS valve / cup, flange etc., all complete as per specification.
3
-
-
... More
Providing and fixing heavy quality 15mm PTMT two way bib cock with wall flange conforming of make Prayag or approved equivalent make and shape including fixing with suitable, flange etc., all complete as per specification.
4
-
-
... More
Supplying and fixing Health Faucet (hand shower - ABS Chrome plated) with 1m long flexible tube with wall hook of approved make including fixing the wall hooks, finishing the surface, etc., all complete as per specification and as directed.
4
-
-
... More
Providing and fixing 15mm dia. and 450mm long PVC inlet connection with PVC check nuts and washers at both ends suitable for Cold and Hot Water Connection confirming to IS specification of 'PRAYAG / PARRYWARE' or approved equivalent make with ISI mark including fixing etc., all complete as directed by Engineer.
15
-
-
... More
Providing and fixing heavy quality Chromium Plated 100mm Square overhead Shower and 225mm long shower arm with wall flange of 'PRAYAG (Drizzle) / METRO-S' or approved equivalent make including fixing with suitable SS valve/cup, flange etc., all complete as per specification.
3
-
-
... More
Providing and fixing PTMT Liquid Soap Dispenser - push Button type of "Prayag" or approved equivalent make including fixing and making good the surface after fixing as per specifications.
9
-
-
... More
Supplying, laying and fixing in position the following sizes of ductile iron pipes in standard length of K-9 class conforming to IS:8329/2000, suitable for rubber gasket (SPR) push on joints, pipes shall be bearing with ISI marks and cement mortar lining inside barrel including lowering them into the excavated trenches and laying, fixing in position to proper grade and alignment all as per IS:12288 and standard specifications including cutting the pipes to the required length, cost of labour, pipes and other materials, tools and plants for laying and installing the pipe lines and testing the lines to the required hydrostatic pressure of 14 kgs./sq.cm. at the specified intervals but excluding cost of Ductile iron specials / fittings and joints which will be paid under relevant items. (Note: The effective length of the DI fittings / specials, valves, double flanged pipes, etc., will be deducted from the overall measurement of the pipe line for making payment against this item).
-
-
-
... More
100mm dia. K-9 class DI pipes
80
-
-
... More
Providing and fixing rubber gasket (SBR or EPDM) push on joints to the following sizes of DI pipes including insertion of rubber gasket into the centering rings of the socket of the pipes and pushing the spigot end into socket and making the joint intact to withstand the hydrostatic pressure of 14Kgs./sq.cm. including cost of all materials, rubber gasket, tools and plants, etc., complete conforming to IS:5382/1985 and IS:12288/1987.
-
-
-
... More
100mm dia. NB DI pipes
5
-
-
... More
Supplying and fixing tested heavy quality DI specials / fittings K-12 class socket, spigot and flanged specials such as bends, collars tapers, tees, duckfoot bend, flanged socket and flanged spigot tail pieces, blank flanges, etc. and conforming to IS:9523/2000 and IS:8329/2000 drilling holes to the flanged fittings shall be PN classification and socket specials /fittings shall be suitable for rubber gasket (SPR) push on joints, etc., complete (Joints will be paid for separately under relevant items).
-
-
-
... More
Upto 300mm dia.
300
-
-
... More
Labour charges only for cutting the existing main DI/CI pipe line of following diameter with steel saw and making provision for new connection by introducing the DI/CI specials including making good the leakages, testing at required pressure all complete as per specifications and as directed at site. (Note: Cost of CI/DI specials and joints will be paid for separately under relevant item.)
-
-
-
... More
100mm dia. pipes
2
-
-
... More
Providing and fixing PVC Nahani trap of FINOLEX/PRINCE or approved equivalent make conforming to the relevant IS code, heavy quality of self cleaning design with 75mm internal dia. and outlet 125mm dia. PVC grating with perforated holes on top, including embedding in cement concrete 1:2:4, forming circular holes by providing and fixing 110mm OD uPVC SWR-TYPE B pipes of required height upto floor level, levelling and rendering smooth, making good the floor and wall etc., complete as per specifications. (Rate shall include cost of PVC pipe and it shall not be paid extra).
6
-
-
... More
Providing and fixing PVC Multi Floor Trap of FINOLEX/PRINCE or approved equivalent make conforming to the relevant IS code, heavy quality of self cleaning design with 110mm internal dia and outlet 125mm dia. PVC grating with perforated holes on top, including embedding in cement concrete 1:2:4, forming circular holes by providing and fixing 110mm OD PVC pipes of required height upto floor level, levelling and rendering smooth, connecting the outlet and inlets, making good the floor and wall etc., complete as per specifications. (Note: Rate shall be inclusive of cost of PVC pipe and embedding PCC.)
8
-
-
... More
Providing and fixing 100mm Square PTMT gratings of "Prayag" or approved equivalent make over the rain water pipes fixing in CM 1:3 as per specifications.
22
-
-
... More
Providing and fixing best quality 110mm OD SWR uPVC pipes - Type A (suitable for ventilation work and rain water applications) conforming to IS: 13592 - latest edition with ISI mark including moulded fittings/specials such as bends, shoes, etc., jointing with seal ring conforming to IS - 5382 leaving 10mm gap for thermal expansion, fixing to the wall with adequate no. of PVC clips for rain water down take pipes etc., all complete as per specifications and as directed by the Engineer in charge.
60
-
-
... More
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Class-I) of SDR-11 of approved make conforming to IS 15778 having thermal stability for hot and cold water supply including providing CPVC plain and brass threaded fittings, fixing the pipe with concealed clamps at 1 m spacing, jointing of pipes and fittings with 1 step CPVC solvent cement, cost of cutting chasses and making good the same, testing of joints complete, etc., all complete as per specification and as directed by Engineer In-Charge. (Note: Concealed work including cutting chases and making good the wall, etc.,)
-
-
-
... More
20mm dia Nominal size
130
-
-
... More
25mm dia Nominal size
30
-
-
... More
32mm dia Nominal size
20
-
-
... More
Providing and Fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Class-I) of SDR-11 of approved make conforming to IS 15778 having thermal stability for hot and cold water supply including providing all CPVC plain and brass threaded fittings, fixing the clamps at 1m spacing, jointing of pipes and fittings with 1 step CPVC solvent cement, testing of joints, etc., all complete as per specification and as directed by Engineer In-Charge. (Internal work-Exposed on wall)
-
-
-
... More
25mm dia Nominal size
10
-
-
... More
32mm dia Nominal size
10
-
-
... More
40mm dia Nominal size
15
-
-
... More
50mm dia Nominal size
15
-
-
... More
Supplying, fixing and testing of following dia CPVC Ball Valve of approved make including fixing over GI/CPVC pipe using with female ends, screwed bonnet, integral seat, non rising spindle class-I including fixing the valve etc., all complete as per specification and as directed by Engineer In-Charge.
-
-
-
... More
25mm dia. CPVC Ball valve
2
-
-
... More
32mm dia. CPVC Ball valve
2
-
-
... More
40mm dia. CPVC Ball valve
2
-
-
... More
Providing and fixing the following internal dia. Gun metal full way gate valve of "Leader" or approved equivalent make bearing ISI mark confirming to IS:778 with female ends, screwed bonnet, integral seat, non rising spindle class-I including fixing the valve etc., all complete as directed by the Engineer-in-charge.
-
-
-
... More
25mm internal dia. Gate valve
3
-
-
... More
32mm internal dia. Gate valve
2
-
-
... More
40mm internal dia. Gate valve
2
-
-
... More
50mm internal dia. Gate valve
2
-
-
... More
Providing and fixing PTMT ball cock (LP/HP) with epoxy coated aluminium rod with HD ball of make "PRAYAG" or other approved equivalent make with all accessories in over head water tanks.
-
-
-
... More
25mm nominal bore
1
-
-
... More
Providing and placing in Position on Terrace (at all floor levels) of HDPE cylindrical Vertical water storage tank of 1000 Litres capacity conforming to IS:12701 with cover of make SINTEX or approved equivalent make including suitable locking arrangement, fixing with inlet, outlet and over flow pipes with necessary checknuts, etc., all complete as per specification and as directed by Engineer-in-Charge.
1
-
-
... More
Supplying, laying and jointing of following dia. of Rigid PVC pipe and specials of approved make with ISI mark as per IS 4985:2000 unloading at work site, laying and fixing the pipes and specials with necessary solvent cement of approved make, testing to required working pressure etc., all complete excluding earthwork excavation which will be paid separately under relevant item as per specification and as directed by the Engineer-in-charge.
-
-
-
... More
50mm OD PVC pipe of class-3 (6Kg/Sq.cm)
15
-
-
... More
Providing and laying of following dia. of SWR uPVC pipes - Type B (Suitable for soil and waste discharge system having wall thickness of minimum 3.2 to maximum 3.8mm) of approved make conforming to IS - 13592 - Latest edition including the cost of PVC pasting type specials such as door bends, door tees and cowls etc., heavy quality for soil waste or vent or antisyphonage PVC pipe, fixing with PVC pipe clips or laid embedded under floor slab and fixed to walls wherever required, etc., all complete as per specifications.
-
-
-
... More
75mm OD uPVC pipes and specials.
75
-
-
... More
110mm OD uPVC pipes and specials.
50
-
-
... More
Providing and laying of underground drainage / Sewerage uPVC pipes of SN 8 class (SDR-34) conforming to IS:15328 of approved make suitable for elastomeric sealing ring joints including cost of spigot and socket end pipes with provision for sealing rings, specials, cutting, jointing with elastomeric seals, testing, etc., all complete as per specifications and as directed by Engineer-in-Charge.
-
-
-
... More
110mm OD uPVC pipes SN8 Class
70
-
-
... More
160mm OD uPVC pipes SN8 Class
70
-
-
... More
200mm OD uPVC pipes SN8 Class
70
-
-
... More
Providing and constructing GULLY CHAMBER of internal finished size 300 x 300mm including providing, supplying and fixing 150 x 150mm (±10mm) PVC Gully trap with PVC grating at top of approved make including excavation in all types of soils, backfilling, embedding the trap in plain cement concrete 1:4.5:8 using 40mm size granite aggregates and constructing the chamber above the embedded PVC with 110mm thick (plus or minus 5mm) bricks in Cement Mortar 1:5 with well burnt stock bricks, plastering over both internal and external faces of brick work with Cement Mortar 1:3; 12mm thick finished smooth with a floating coat of neat cement on both faces, providing and fixing 400 x 400 x 25mm precast slab in reinforced cement concrete of 1:2:4 using 12mm and below hard broken granite stones including cost of gully trap, chamber etc., all complete as per specification.
10
-
-
... More
Construction of rectangular Manhole/ Inspection Chamber of following size clear internally with brick masonry walls 230mm thick using well burnt chamber bricks in Cement Mortar 1:5 (with necessary corbelling as required), plastering with Cement Mortar 1:3; 12mm thick inside and outside, inside finished smooth with a floating coat of neat cement and outside trowel finished including excavation in all types of soils, back filling, providing and laying bed concrete 150mm thick and having 150mm wide projection on all the sides with Plain Cement Concrete 1:4.5:8 using 40mm maximum size hard granite broken stone, forming, benching and channelling in plain cement concrete 1:2:4 using 20mm maximum size hard broken granite stone, finishing smooth etc., all as per specifications, drawings and as directed at site - to an initial depth upto 1.00 metre.
(Note: The rate quoted shall be excluding the cost of cover slab & steel reinforcement which will be paid for separately under relevant item.)
-
-
-
... More
600x450mm for initial depth of 1.00 metre.
14
-
-
... More
Extra depth of rectangular manhole/ inspection chambers of size 600x450mm over the initial depth of 1.00 metre.
4
-
-
... More
900x600mm for initial depth of 1.00 metre.
6
-
-
... More
Extra depth of rectangular manhole/ inspection chambers of size 900x600mm over the initial depth of 1.00 metre.
5
-
-
... More
Construction of rectangular rain water Inspection Chamber of 900 x 600mm size clear internally with brick masonry walls 230mm thick using well burnt chamber bricks in Cement Mortar 1:5 (with necessary corbelling as required), plastering with Cement Mortar 1:3; 12mm thick inside and outside, inside finished smooth with a floating coat of neat cement and outside trowel finished including excavation in all types of soils, back filling, providing and laying bed concrete 150mm thick and having 150mm wide projection on all the sides with Plain Cement Concrete 1:4.5:8 using 40mm maximum size hard granite broken stone, forming, benching and channelling in plain cement concrete 1:2:4 using 20mm maximum size hard broken granite stone, finishing smooth etc., all as per specifications, drawings and as directed at site - to an initial depth upto 1.00 metre. (Note: The rate quoted shall be excluding the cost of cover slab & steel reinforcement which will be paid for separately under relevant item.)
8
-
-
... More
Supplying and fixing of Steel steps with zinc coating of size dowel distance 330mm c/c and leg length 225mm with 16mm dia. Core material of steel with zinc coating encapsulated with plastics / PE of 2.5mm thick of make Linktech or other approved make including fixing by drilling holes, applying cement paste with bonding agents, fixing the rungs to required alignment, etc., all complete as per specifications and as directed by Engineer-in-charge.
12
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking in to and make good the walls, floors with cement concrete 1:2:4 mix (1cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) cement plastered on both side with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain, etc., complete.
-
-
-
... More
For pipes 250 to 300 mm diameter
1
-
-
... More
Supplying laying and jointing of RCC hume pipes with collars of class NP-2 as per IS specifications including aligning to proper level and line as directed at site, jointing with Cement Mortar 1:2, curing, etc., complete as per specification.
-
-
-
... More
100mm dia. RCC hume pipes
50
-
-
... More
150mm dia. RCC hume pipes
25
-
-
... More
250mm dia. RCC hume pipes
25
-
-
... More
300mm dia. RCC hume pipes
20
-
-
... More
Supplying, placing of 250mm dia RCC hume pipe collars of class NP-2 as per IS specifications including aligning to proper level and line as directed at site, jointing with Cement Mortar 1:2, curing, etc., complete as per specification.
10
-
-
... More
Construction of Granular sub-base (Grading-I) by providing close grade Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 of MORT&H specifications for road and bridge works( 5th Revision) and as directed by the Engineer - in - charge.
160
-
-
... More
Providing and laying of Wet Mix Macadam (WMM) for Sub-base and base course conforming to clause 406 of MORT&H Specification for road and bridge works (Fifth Revision) using 53mm downgraded stone aggregate including cost of coarse aggregates, fine aggregate, premixing the Material with water at OMC in mechanical mix plant, carriage of mixed Material by tipper to site, laying in uniform layers with paver/motor grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density, etc., all as per specification and as directed by Engineer-in-charge.
210
-
-
... More
Providing and laying 60mm thick factory made chamfered edge prefabricated cement concrete interlocking Solid / perforated paver block of M-30 grade made by table vibratory method using PU moulded with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand including cost of sand filling, levelling with required slope, ramming the surface, watering, consolidation using vibratory earth rammers, filling the joints with sand, cleaning, etc., all complete as per specification and as directed by the Engineer-incharge.
680
-
-
... More
Providing and laying factory made precast Kerb stone of M-20 grade cement concrete of size 100mm thick & 500mm ± 50mm depth with suitable interlocking arrangement, top chamfering of size 50x70 mm or as approved size including excavation, conveying, laying the precast kerb blocks in position to the required line, level and curvature, making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), jointing / pointing the joints with cement mortar 1:3, refilling the sides, compacting, making drainage opening wherever required, etc., all complete as per specification and as directed by the Engineer-in-charge.
(Note: Length of finished Kerb edging shall be measured for payment and Precast kerb stone shall be approved by Engineer-in-charge.)
260
-
-
... More
Dismantling Reinforced cement concrete at all lifts including clearing and depositing the same with a distance of 100 metres as directed by Engineer-in-charge.
2
-
-
... More
Dismantling Brick work in cement mortar at all lifts including clearing and depositing the debris within a distance of 100 metres all as directed by Engineer-in-charge.
2
-
-
... More
Part - B Electrical Items Supply and installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with all the required accessories like round JBs, Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc, on roof slab, column, beams etc as per the detailed specification.
-
-
-
... More
25 mm Dia 1.8mm, wall thickness GI Heavy Duty ERW Conduits with 75mm deep junction boxes
660
-
-
... More
Supply and installation of following sizes of Heavy Duty, Hot Dip Galvanised MS ERW Conduits for Electrical & Communication System with required Solid Long Bends, Check Nuts, Nipples, Couplings, Reducers, Copper Clips, Copper Conductor, GI Wire etc, in Floor, Walls, Brick, Block Masonry, etc. including chasing & replastering as per the detailed specification.
-
-
-
... More
25 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes
1050
-
-
... More
32 mm Dia 1.8mm, wall thickness Heavy Duty ERW Conduits with 50mm deep junction boxes
150
-
-
... More
Supply and installation of following sizes of Heavy Duty, Hot Dip Galvanised GI pipes with required accessories on Floor, column, beams etc including chasing and replastering as per the detailed specification.
-
-
-
... More
50 mm NB, 4.5mm wall thickness Heavy Duty GI pipe
50
-
-
... More
Supply and Embedment of following sizes of flush mounting POWDER COATED TPN/SPN DB Enclosures with Double Door and per Phase isolation DBs consisting of Phase, Neutral and Earth Bus and interconnecting wires etc. at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.
-
-
-
... More
TPN, 6 Way Distribution Board Powder coated Per Phase Isolation DBs Per phase Isolation kit with all accessories. Cat No:507671,Cat No: 507945 or equivalent
9
-
-
... More
Supply and Embedment of following sizes Cable end termination box at suitable depth in brick work as per the detailed specification and as directed by the Engineer-in-charge.
-
-
-
... More
TPN, 6 way Cable end box,cat No:507917 or equivalent suitable for SPN 16/ TPN 6 way Distribution Board cat No:507613/507671
9
-
-
... More
Supply and Embedment of 50mm Deep, Square/Rectangular Concealed type and GI double earthed modular metal boxes of the following types and as specified in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification.
-
-
-
... More
ONE/TWO Module box
33
-
-
... More
THREE Module box
7
-
-
... More
FOUR Module box
2
-
-
... More
SIX Module box
37
-
-
... More
Eight Module box
23
-
-
... More
Supply and Embedment of MS fan Hook Boxes in RCC roof slab with finishing and making good as per drawing No:IGC/ESD/9170/8009 and the detailed specification.
6
-
-
... More
Supply, embedment and flush mounting of following sizes of Metal Clad Socket in sheet steel enclosure with Plugs and Socket including chipping and finishing as per the detailed specification.
-
-
-
... More
1 Phase, 20A MC socket box with 20A SP MCB
2
-
-
... More
Supply and installation of 6mtr length DWC HDPE pipes,200 mm OD / 175 mm ID with Coupler as required including excavation at a depth of 1200 mm in all types of soil, backfilling complete as directed by Engineer-in-Charge. 6mtr will be measured as 1No.
2
-
-
... More
Supply and embedment of concealed type MS boxes of the following types and as specified in RCC/Brick/Concrete Block Masonry with finishing and making good as per the detailed specification.
-
-
-
... More
300(W) X 300(H) X 120(D) mm, 1.8mm thick sheet MS Box
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%