Corporation Of Chennai Tender

Supplying and fixing in position best Indian type water closet51cm of superior quality and approved make white glazed earthernware with 'P' or 'S' trap and a pair of porcelin footrest and forming flooring alround water closet using 40mm size broken brick jelly concrete in C.C1:4:10(1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10broken brick jelly) and sand filling around the closet including finishing the surface with C.M.1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 20mm thick including making good all the disturbed portions,etc., complete.

Providing and fixing colour glazed E.W.C. with rose wood seatings (Black)low level flusing tank with fittings, etc., complete.(m.d18)

Painting old iron work two coats with ready mixed paint of superior quality and approved colour.(ISI STD)

Supplying and fixing Hydraulic Door Closer of approved make.

Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and LED tube)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 mm x 100 mm x 113mm TW switch box in flush with wall with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS socket with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Providing and fixing 15cm iron pad lock for locking arrangements in the existing doors.(ISI STD)

Providing boring, using hand bore set, 150mm dia upto hard formation and boring 100mm dia below this in rock formation including hire charges of hand bore set and its accessories, labour charges and transport charges for drillings,preparing the site etc.,providing and erecting 110mm dia (O.D.) P.V.C.pipe plain (wall thickness 4.5mm and slotted) upto water column and

Supplying and Jointing 40mm dia P.V.C pipe.including cutting, threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete

Supplying & Jointing 25mm dia PVC pipe.including cutting, threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc.,complete

Supplying & Jointing 20mm dia PVC pipe.including cutting, threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding,etc.,complete.

Supplying and fixing of 1.0 HP Jet Pump Set includ...ries. ( Kiloskar, Texmo, CRI or equivalent Brand)

Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( ON EXISTING CLAMP WITH 300 MM DOWN PIPE )

Supplying and Fixing of Digitally Printed Retroreflective Double Arrow Sign board size 1970mm x 900mm made of Type XI grade cube corner micro prismatic grade sheeting confirming to IRC 67-2012 as per ASTMD-4956-09 Specifications, Digitally Printed using Latex Printer for Traffic Colour logos/text and laminated with UV Resistant clear electro-cut film and applied to proper prepared sign substrate made of 4mm thick Aluminum Composite Material (ACM) with 0.25mm aluminium skin thick on both sides and back support frame angle of 25mm x 25mmx3mm Supported by 32NB, 2.7mm Thick Stainless steel pipe all round in 304 grade and 2 nos. of vertical posts of 65NB, 3.04mm thick stainless steel pipe of 304 grade firmly fixed to the found by means of properly designed foundation of size 300 mm x 300 mm x 450 mm with M15 Grade cement concrete and the item shall include earthwork excavation, cost of materials, loading, unloading, lead, lift, transportation etc, complete as per approved template. The signs shall be manufactured using a system of matched components of reflective sheeting and overlay films and digital inks manufactured and supplied by the reflective sheeting manufacturer .Digitally printed traffic colour (red, blue, green, yellow, orange and brown) areas on white sheeting shall not be having less than 70 percent of the value of the coefficient of retro reflection established for its colour and type of sheeting as given in Table 6.9 of IRC 67-2012.The coefficient of retro reflection after the stipulated warranty period shall be minimum 80 percent of the initial value of the printed sign (initial value shall be minimum 70% of the values given in table 6.9 of IRC 67-2012). Match component system warranty for the components like retro-reflective sheeting, overlay films and digital inks shall be provided by the manufacturer. The Retro reflective sheeting shall be covered under 10 years warranty issued for field performance and certified copy of completed three years outdoor exposure report shall be obtained by the engineer-in-charge. The warranty shall be inclusive of digitally printed logos/text/legends and their bonding to the retro-reflective sheeting (as per MoRT&H Specification No.801). The latex printer used for digital printing should be used with Inks of low VOC emission and should have Greenguard, eco logo certificate as per UL 2801 Standards. The warranty & Test certificates shall be obtained from the retro-reflective sheeting manufacturer by the contractor and shall be submitted to engineer-in-charge.

Supplying and erecting SINTEX or approved equivale...taxes and freight charges within Corpn.City Limit.Help

Solid panel PVC door with frame Solid PVC door shutters using 19 gauge 19mm MS sq..tubes for styles and outer frames. 15mm MS sq.tubes for top, lock and bottom rails. The steel tubes shall be covered with 5 mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheet for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mmx30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30 mm. The over all size of frames shall be 50mmx45mm, with suitable rabate for housing the shutter.including labour charges etc., complete.as per ISI standard.

Supplying and fixing 55cm x 40cm colour glazed wash basin withl ead and brass connection, C.P. pillar tap and other fittings,etc., complete.