Corporation Of Chennai Tender

Providing and laying first quality Vertified tiles of all colours of size 605mmx605mmx9.6mm in cm 1:3 12mm thick including pointing with white cement. Labour Materials etc. (Relevent ISI std).

Supplying and fixing 12mm thick flat pressed twin finished laminated P.C.T. grade both side laminate super particle(M.D.F) board of fire and moisture resistance properties of approved make and quality properly fixed in position (ISI STD).

Supplying and fixing partly glazed and partly doors with both side laminated particle Board single leaf or double leaf aluminium door with frame and shutter made of anodized aluminium extruded sections of Hindalco/jindal or apoproved equivalent bnrand. The door frame shall be of size 101.66x44.45mm 12 gauge fixed in position (Top and side Verticals) with teak wood plug embedded in wall screwing etc. The styles to pand intermediater rails of shutter shall be of size 44.45x44.45mm 12 gauge section and the bottom rail shall be of size 101.66x44.45mm 12 gauge with necessary glazing plete of approved quality. The bottom panalling shall be with 12mm thick flat pressed twin finished Laminated P.C.T. grade both side laminated to a Height of 90cm from the floor level super particle board of fire and Moisture resistent properties of approved make and quality. The top glazing shall be of 5mm thick glass panes of approved quality free from undulations and waves fixed by snap on beeding of glazing plate rubber gasket with necessary anodoized aluminium hinges heavy duty automatic door closer of approved make .and quality and aluminium tower bolt. Aluminium push .plate handle four leverred mortice lock of approved .make and quality and all other fittings fixing the .shutter over the frame the entire work confirming to .relevant ISI Specification.(Relevent ISO code)..

Supplying and fixing 55cm x 40cm colour glazed wash basin withl ead and brass connection C.P. pillar tap and other fittings etc. complete.

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red-oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS

Supplying and fixing colour metal roofing sheets made up of Galvalumed Aluminum-Zinc Alloy coated steel, AZ-150 and Hi-tensile Grade 550 steel of thickness 0.47mm, Trapezoidal profile over all width 1080 mm etc

Providing of Rain Water Harvesting struture using precast well ring size 1200 (inner dia) x 4500mm (Height) (300mm x 15Nos) x 80mm (thick) using 1:4:8 concrete necessary earth work excavation providing PCC 1:4:8 and bottom well rings 150x200mm thick using 1:1.5:3 concrete, RCC cover slab of 1680mm dia 180mm thick . Providing bore hole of size 300mm dia using hand bore set upto 8.50m depth including shifting of the hand bore from one place to another plac with in 5km, erecting 200mm dia slotted PVC pipe (6kg/cm2) with cowl, filling with 20mm HBG metal out side peripheral of the pipe including cost, conveyance, cleaning the site and finishing etc., complete.

BORE FLUSHING

MOTOR REPAIR

RO PLANT ROOM DOOR REPAIR

DENTAL ROOM CHAIR REPAIR AND PIPE REPAIR

BIO WASTE DOOR REPAIR

MAIN DOOR REPAIR