Corporation Of Chennai Tender

Providing and laying first quality plain ceramic tiles of all colours of size 305mmx305mmx6mm set in C.M.1:3 12mm thick including pointing with white cement labour materials etc. (Relevant ISI.std).

Supplying and paving second quality colour glazed tiles 30x20cm x 6 mm with relevent ISI STD size of approved make set in C.M. 1:3 (1 cement and 3 river sand) 20mm thick and pointing with same colour cement polishing clearing etc. complete..

Supplying and fixing White glazed water closet pan of 51cm size without trap but with cement foot rests 25x12.5cm including 100mm dia stoneware stand pipe 15x10cm S.W. T junction 150mm dia through lime concrete alround the closet stand pipe and neat finishing of water closet apartment 120x90cm etc. complete as directed during execution..

Supplying and fixing white glazed earthern ware wash basin of size 55x40cm of approved make with a pair of G.I.brackets 15mm diaC.P.Pillar tap 32mm C.P.waste fittings with rubber plugs andC.P.chain 32mm 75cm long P.V.C.waste pipe with necessary union solder joint 90cm long with 15mm lead and brass connections with brass nuts and 15mm dia G.M.wheel valve and giving necessary connection etc. complete including cost of white lead teakwood plug screws rubber washers including painting two coats of approved make and colour paint over etc. complete. (wash basin should be got approved by the Buildings Engineer before use onworks).

Supplying and fixing C.P.screw downtap of size 20mm

Supplying and Jointing 25mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete.

Supplying and Jointing 40mm dia P.V.C pipe.includingcutting threading and jointing with necessary specials fixing towall with clamps and screws including making holes in the wall ordrilling holes in roof and making good the wall or roof afterfixing with necessary scaffolding etc. complete.

Supplying and erecting HDPE plastic vertical cylindrical 2000 Litre Water Storage Tank. Strickly adhering ISI Standard as per ISI Mark 12701 (Latest revision) including all taxes and freight charges within Corpn.City limit.

Supplying and fixing 40mm dia G.M.Gate valve.

Supplying and fixing P.V.C. pipe 110mm dia rain water down fallpipe as per ISI standard (I.S.4985)including P.V.C.Bends withoutdoor arrangements shoes gratings with F.I.Clamps 40mmx20mm ofsuitable size fixed to wooden kplugs embeded in walls in cementmortar 1:3 (1 cement and 3 river sand including cutting holes inwalls and making good the same after fixing the plugs etc.complete as directed during execution..

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door:Providing and fixing casement dorrs fabricated form Un-Plasticized Polyvinyl Chloride (UPVC) sections. Profiles:The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash shold be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extructed seals. Hardware: All the hardware like friction stays,handles should be screwed with self tapping screws. The handless, licks should be designed so that they cannot be released from outside. Glazing:The window system should be glazed with 5 mm plain float glass / 6mm bison lam Installation:The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the palstered brick wall using self expanding nylon plug and driving MS electroplated screws into plug.

Supplying and fixing partly glazed and partly doors with both side laminated particle Board single leaf or double leaf aluminium door with frame and shutter made of anodized aluminium extruded sections of Hindalco/jindal or apoproved equivalent bnrand. The door frame shall be of size 101.66x44.45mm 12 gauge fixed in position (Top and side Verticals) with teak wood plug embedded in wall screwing etc. The styles to pand intermediater rails of shutter shall be of size 44.45x44.45mm 12 gauge section and the bottom rail shall be of size 101.66x44.45mm 12 gauge with necessary glazing plete of approved quality. The bottom panalling shall be with 12mm thick flat pressed twin finished Laminated P.C.T. grade both side laminated to a Height of 90cm from the floor level super particle board of fire and Moisture resistent properties of approved make and quality. The top glazing shall be of 5mm thick glass panes of approved quality free from undulations and waves fixed by snap on beeding of glazing plate rubber gasket with necessary anodoized aluminium hinges heavy duty automatic door closer of approved make .and quality and aluminium tower bolt. Aluminium push .plate handle four leverred mortice lock of approved .make and quality and all other fittings fixing the .shutter over the frame the entire work confirming to .relevant ISI Specification.(Relevent ISO code)..

Supplying and fixing M.S.Grill gate of required size in twoshutters with necessary iron members gun metal cups and wheels75mm dia. with fittings locking arrangements etc. complete including painting a priming coat of approvedprimer etc. complete (The design of gate furnished is subject toalteration during execution.).

Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and LED tube)

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp

Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point

Cost of supply of 30W LED Street Light Fitting

Supply of 16" ( 400mm ) sweep size WALL MOUNTING FAN

Supply & installation of Split type 1.5 TON Air conditioner ( 5 Star rating )

Plastering with cement mortar 1:3 (1 cement and 3 river sand)20mm thick including curing etc. complete.

Painting old iron work two coats with ready mixed paint of superior quality and approved colour.(ISI STD).

Painting the OLD plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years..

Construction of Inspection chamber of size 60x60x60cm with necessary earth work excavation 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement 4 river sand and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 river sand) for 23cmthick wall benching channelling and plastering interior exterior and top with c.M.1:3 (1 cement and 3 riversand) 12mm thick and providing 7.5cm thick RCC loose slabcovering in CC 1:2:4 ( 1 Cement 2 river sand and 4 blue granitebroken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose etc. complete.

Aluminium repair works

Plumbing repair works

Electrical repair works

Fixing Screen