Corporation Of Chennai Tender

Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials Transportation Loading Unloading Charges And All Taxes Including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining Etc Complete .

Supplying And Fixing of Digitally Printed Retroreflective Single Arrow Sign Board Made of Type Xi Grade Cube Corner Micro Prismatic Grade Sheeting Confirming To Irc 67-2012 As Per Astmd-4956-09 Specifications, Digitally Printed Using Latex Printer For Traffic Colour Logos/Text And Laminated With Clear Electro- Cut Film And Applied To Proper Prepared Sign Substrate Made of 4mm Thick Aluminum Composite Material (Acm) And Back Support Frame Angle of 25mm X 25mmx3mm Supported By 32Nb, 2.7mm Thick Stainless Steel Pipe All Round In 304 Grade And 2 Nos. of Vertical Posts of 65Nb, 3.04mm Thick Stainless Steel Pipe of 304 Grade Firmly Fixed To The Found By Means of Properly Designed Foundation of Size 300 mm X 300 mm X 450 mm With M15 Grade Cement Concrete And The Item Shall Include Earthwork Excavation, Cost of Materials, Loading, Unloading, Lead, Lift, Transportation Etc, Complete As Per Approved Template. The Sign Board Base Made of Type Xi Micro Prismatic Grade Reflector Sheeting of White Color Should Pass Minimum Co-Efficient of Retro-Reflection Values As Per The Table 6.9 of Irc 67-2012. The Retro Reflective Sheeting Shall Be Covered Under 10 Years Warranty Issued For Field Performance And Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained By The Engineer-In- Charge. The Warranty Shall Be Inclusive of Digitally Printed Logos/Text/Legends And Their

Supplying And Fixing Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To-Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).