Corporation Of Chennai Tender

Writing name boards for the school buildings and otherinstitution of Corporation of Madras with the size of letters 5cmto 25cm as directed after scrapping the old paint from nameboards and re painting with two coats of superior quality ofpaint on both sides and then writing the letters at front face ofthe board with the above size of letters includingscaffolding etc. complete as directed during execution

Construction of inspection chambers of 60x60x60cm sizeswith earth work excavation for foundation 23cm thickconcrete bed using 40mm brick jelly concrete in C.M. 1:4:10 forfoundation brick work in C.M. 1:6 for chambe plastering withC.M. 1:3 12mm thick benching channelling supplying and fixing45x45cm medium weight L.S. cover and frame etc. complete (M.D.49)

Wiring with 2 x 1.5 sqmm (22 /0.3) PVC insulated SC unsheathed Copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A F.T. switch, covered with hylum sheet of 3mm thick with painting of suitable colour, with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (For electronic Regulator)

Supply of 16" ( 400mm ) sweep size WALL MOUNTING FAN

Cost of supply of 18w 4 feet LED fitting with LED tube complete set (Patty and LED tube)

Supply of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for 9 W / 11W CFL lamp with CFL

Art work as per the direction of department official, over Oil Painting with first class quality and approved colour including a priming coat with thorough scrapping clean removal of dirt., etc., complete and including necessary plaster of paris, putty, etc., wherever required (Relevent ISI STD), excluding putty works.

Brick work using country bricks 8 3/4"x4 1/4"x2" specially moulded for well steining work in C.M.1:4 ( 1 cement and 4 Crushed Stone Sand (Commercially called M-Sand) Sand and) including, curing, etc.,complete for 23cm thick walls.

Plastering with cement mortar 1:4 (1 cement and 4 Crushed Stone Sand (Commercially called M-Sand))12mm thick including curing, etc., complete

Supplying and fixing fully polished cuddapah slab for the cup board etc. including cutting to required size necessary cement mortar for fixing etc. complete

Supplying and fixing P.V.C. screw down tap of size 20mm dia

Supply & Fixing of 48" sweep size CEILING FAN of 5 Star Rated with double ball bearing , down rod, canopy complete set (with out speed regulator) ( INCLUDIN SUPPLY & FIXING OF FAN CLAMP WITH SIDE PLATE AND 45 cm. ( 18" ) CROSS ARM WITH 300 MM DOWN PIPE )

Supplying and fixing P.V.C. pipe 110mm dia rain water downfall pipe as per ISI standard (I.S.4985) with door arrangements including P.V.C.Bend, shoes, grating with F.I.clamps 40mmx20mm of suitable size fixed to wooden plugs embedded in walls in cement mortar 1:3 ( 1 cement and 3 Crushed Stone Sand (Commercially called M-Sand) including cutting holes in walls and making good the same after fixing the plugs etc.complete as directed during the execution.

Suplying and fixing fully panelled with both side laminated particle board signle of double shutter aluminimum door with door srame and shutter frame made if anodized aluminium extruded sections of Hidalco/jindal or any approved brand. The door Frame shall be of size 101.66x44.45mm 12 gauge (Top abd sude vertical) Fixed in poistion with Necessary teak wood plugs Embedded in the wall with screwing etc. The styles Top and intermediate rails of the shutter should be of size 44.45x44.45mm 12 gauge secion. And the bottom rail shall be of size 101.66x44.45mm 12 gauge with necessary glazing plate of approved quality entrie shutter shall be of 12mm thick flat pressed twin finished laminated P.C.T. grade both side lminated super article board of fire and moisture resistance properties of approved make and quality properly fixed in position to a Height of 90cm from the floor level including Heavy duty automatic door closer of approved make and quality aluminium push plat handle four levered mortice lock of approved made and quality and all other fitings etc.complete. The entire work confirming to the relevant I.S.I. specifications.

Supplying and paving second quality colour glazed tiles 30x20cm x 6 mm with relevent ISI STD size of approved make set in C.M. 1:3 (1 cement and 3river sand) 20mm thick and pointing with same colour cement polishing clearing etc.complete.

Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour

Painting old iron work with one coat of ready mixed paint of superior quality and approved colour.(ISI STD).

Supplying and Jointing 20mm dia PVC pipe.including cutting threading and jointing with necessary specials fixing to wall with clamps and screws including making holes in the wall or drilling holes in roof and making good the wall or roof after fixing with necessary scaffolding etc. complete..