Corporation Of Chennai Tender

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5 (This Rate Is Applicable Only If Work Is Done During Night)

Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) ( Procured from State/ Central Public sector undertakings only) Including Cost of Bitumen emulsion At The Site Including Labour Charges For Preparing The Surface And Applying Required Quantity of Bitumen Emulsion As Prime Coat Using Bitumen Sprayer Etc. Complete Over Wet Mix Macadam As Per Clause 502 of Mort & H Specifications. (This rate is applicable only if the work is carried out during Night.)

Providing and laying Tack coat over the existing bituminous surface using 2.0 kgs of bitumen emulsion (Rapid Setting 1) ( Procured from State/ Central Public sector undertakings only) per 10 Sq.m area including cost of bitumen emulsion at the site, including labour charges for preparing the surface, and applying the required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete as per Clause 503 of MoRT&H Specifications Rev.5 (This rate is applicable only if the Work is carried out during NIGHT)

Providing and laying 50mm consolidated thick bituminous macadam using 0.20 cum for 26.50- 13.20mm, 0.43 cum of 13.20-2.36mm and 0.08 cum of 2.36mm & below size IRC metal with 37 Kgs of VG30 bitumen ( Procured from State/ Central Public sector undertakings only) for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 504 of MORTH Rev-5 (This Rate Is Applicable Only If The Work Is Carried Out During Night)

Providing and laying Bituminous Concrete to 30 mm thick using 0.13 cum of 19.00- 9.50mm,0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30 bitumen ( Procured from State/ Central Public sector undertakings only) for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 . (This Rate Is Applicable Only If The Work Is Carried Out During Night).

Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed As Per Mort& H Specification No.803

Providing And Fixing Reflective Road Studs of Category a Raised Pavement Markers Made Out of Poly Carbonate / Methyl Methecrylate /Abs Moulded Body Conforming to astm D 788 And Reflective Panels With Micro Prismatic Lens Capable of Providing Total Internal Reflection of The Light Entering The Lens Face With Retro Reflectance And Chromaticity Values Conforming to astm D4280. The Reflective Raised Pavement Markers Shall Also Confirm To The Morth Circular No Rw/Nh. 33023/10/97- Do.Iii Dt 11.06.97. The Height, Width And Length Shall Not Be Less Than 15mm, 90mm And 100mm And With Minimum Reflection Area of 13 Sq.m On Each Side And The Slope To The Base Shall Be 35+/-5Degree Each Reflectors Shall Have A Cil Not Less Than Values Specified In Table 2 of Said Morth Circular. The Strength of Deteachment of The Integrated Cylindrical Shanks, (of Diameter Not Less Than 19+/-2mm And Height Not Less Than 30+/-2mm) From The Body Is To Be A Minimum Value of 500Kgf. Fixing Will Be By Drilling Holes On The Road For The Shanks to Go Inside, Without Nails And Using Epoxy Resin Based Adhesive As Per Manufacturer’S Recommendation And Complete As Directed By The Engineer.The Marker Shall Support a Load of 13635Kg Tested In Accordance With Astm D4280 And Confirming to Irc 35-2015 Guidelines And .2 Year Manufacturers Warranty For The Satisfactory Field Performance To Be Submitted To The Engineer Incharge For Payment Processs As Mort&H Specification 804 Etc., Complete