Chennai Metropolitan Development Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Chennai Metropolitan Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date5 Oct 2023
Closing Date2 Nov 2023
Tender Amount₹ 16,80,00,000
Costs
EMD
₹ 33,60,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Proposed Construction Of Bus Terminus In At Mamallapuram
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CMDAC_376164_1Bid Award Id
ViewTender No
Tener Notice No.18/2023-2024Tender Authority
Chennai Metropolitan Development Authority ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
600mm DIA
13100
-
-
Carrying out initial working pile load test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete.
-
-
-
600 mm dia - Safe vertical load capacity -95 MT - (for 35 RM )
5
-
-
Carrying out Dynamic Initial vertical load test on Bored cast-in-situ pile as specified in ASTM D4945 for specified test loads. ( 750mm dia - 500 mm dia ). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete
5
-
-
Earth work excavation for all foundations in all type of soils and sub soils to the required depth for Footings, plinth / grade beams, etc,. by mechinaries including manual excavation for the following type of soil / rock as per detailed specification. As per SS 20B as hard rock requiring blasting inclusive of shoring strutting and baling out water wherever necessary and including refilling 0 to 2.0m depth consolidation depositing the surplus earth in places shown clearing and leveling the site with an initial lead of 10 metre and lifts as specified hereunder etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers.
-
-
-
For Grade slab, Compound wall - 0 to 2 M
11000
-
-
Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 5 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
11100
-
-
Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.
4522
-
-
Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge.
8760
-
-
Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc.,
-
-
-
Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.
Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth.
Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.
Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12" to a depth of 8" around the building before laying the plinth projection. This holes has to be be closed after the treatment.
8300
-
-
Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 cement , 4 sand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.
2350
-
-
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
-
-
-
For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
26980
-
-
For pile cap, grade beam, raft slab etc.
3210
-
-
For plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.
4371
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.
3265
-
-
Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge
-
-
-
The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge
-
-
-
Pile Cap, grade beam, Grade Slab
4220
-
-
Lower Ground Floor
2515
-
-
Upper Ground Floor
1950
-
-
First Floor
543
-
-
Terrace Floor
334
-
-
Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
1794
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge
-
-
-
Ground Floor ( Lower & Upper )
743
-
-
First Floor
197
-
-
Terrace Floor
76
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
-
-
-
Ground Floor ( Lower & Upper )
94
-
-
First Floor
99
-
-
Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine P.sand) according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
17019
-
-
Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
8295
-
-
Plastering 15 mm thick for external surfaces with cement mortar 1:5 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed.
Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
8434
-
-
Supply and Laying with best quality approved Kotah stone slab not less than 20 mm thick and the size of slab in general not less than 600 x 600 mm machine cut and machine high pre-polished, set in C.M 1:3 (1 of cement : 3 of manufactured sand ), 20 mm thick topped with white cement slurry (for surface contact of the bottom of the Kotah slab) as per approved pattern/design as per drawing by using irrespective of size and shape, including finishing the joints with white cement slurry, cutting, edge chamfering and polishing rough, medium, nice and acid wash and tin-oxide polish. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
10655
-
-
Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
1198
-
-
Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
294
-
-
Foamed PVC Door frame : Specification: Providing factory made Pre Laminated FPVC Door Frame of the size 105 X 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre jointed with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame frame with the help of PVC Fasteners of 3 nos. to be provided for each vertical member, GI stiffners of ( U channel of size 29 X 9, 1mm, 150mm long) - 3 Nos at hinge point, Frame Reinforcement of (U' GI channel of size 46 X 22 X 0.6mm), bottom tie rod of ('U' GI channel Size of 15 X 15 X 1mm ), etc., Complete complying with the standard Specification. the door frame should be got approved from the Executive Engineer before use on work
-
-
-
Providing of 35mm thick factory made pre - laminated ABS ( Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent desings consisting of all round frame made out of water proof solid PVC bar of size 20 X 32 mm reinforced by 32 X 32 mm 2 nos ., for vertical made out of LVL core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with pre- laminated ABS sheets thickness of 1.5mm PVC edge bending of size 0.45mm on the vertical sides. hardware made out of steels coated butterfly hinges - 3nos for each shutter and ISI make SS round lock Complete complying with the standadrd Specification . the door shutter and frame should be got approved from the Departmental Engineer before on use
-
-
-
Size of door (DD1) - - 1.8 X 2.4 m
27
-
-
Size of door (DD2) - 1.5 X 2.4 m
8
-
-
Size of door (D1) - 1.0 X 2.4 m
90
-
-
Size of door (D2) - 0.75 X 2.4 m
93
-
-
Size of door (D3) - 1.1 X 2.4 m
16
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
139
-
-
UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on wor
14
-
-
Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Engineer-in-charge.
5520
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)
139
-
-
Painting the Ceiling with Two coats of first quality Plastic Emulsion paint of approved colour over one coat of primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
17019
-
-
Supply and painting of two coats of Plastic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.
Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.(Internal surface)
8295
-
-
Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
9861
-
-
Providing guildeline road marking kerb painting (special acrylic medium pigmented ) involving cleaning the surface free of dirt and loose particles applying one coat of primer and applying one layer of 20 to 25 microns. Rate shall include for all materials & labour components etc., as complete all respects complying with relevant IRC specifications, as directed by the Engineer-in-charge.
571
-
-
Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with pattern design of 50% colour and 50% Plain made of M40 grade concrete - 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.
2934
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
99
-
-
Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturer's specification after entire completion of laying pipes, sanitary fittings etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
854
-
-
TERRACE WATERPROOFING:
Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations."
i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement.
The roof slab / gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO:1 (or) other approved equivalent make shall be spread over the prepared surface
On the spread mortar provide and lay well burnt brick bats (COBA) to a average minimum thickness of 55 mm (i.e.. minimum 40 mm thickness at lower end and 70 mm thickness at higher end). An additional layer of brick bat (COBA) shall be laid over the existing brick bat COBA surface if required to get the required gradient for adequate drainage giving a slope of approximately 1 in 120, which will be measured separately under relevant item.
-
-
-
The gap between brick bat shall be filled with cement mortar 1:4 admixed with waterproofing compound like CICO NO:1 or approved equivalent afterwards curing shall be carried out for two days a final layer of cement mortar of 1:3 admixed with water proofing compound like CICO NO:1 or approved equivalent make shall be laid to a thickness of 20 mm and draw a false line of 300 mm x 300 mm."
The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, water proofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )
6991
-
-
Providing and laying water proofing treatment to surfaces and the like consisting of :i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. ii) IInd course of 20mm cement plaster 1:2 (1 cement : 2 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
8677
-
-
Supply and applying water proofing treatment on Retaining walls external surface at Basement, UG Sump and STP raft sides etc. using cement admixed with water proofing compound in the following order.
i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement
ii) Supply and Fixing of 50 long 18 mm dia GI nozzles in the hole of about half the depth of member size along construction joints, and honey comb areas at a spacing not more than 1m c/c.
iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement.
-
-
-
iv) Sealing & cutting of nozzles and leveling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.
v)Supply and applying one coat of TAPECRETE Acrylic Polymer Modified Cementitious Slurry Coat over well prepared surface as a Primer and applying CICO CORCHEM 206 - I Polyurethane Based Elastomeric Coating to the thickness of 1.5 mm over TAPECRETE slurry coat applied surface.
vi) Lay protective plaster layer with 20 mm thick Cement Mortar 1:4 (1 cement: 4 coarse sand) admixed with Normal setting integral Waterproofing compound CICO NO.1 at the rate of 2% by weight of cement over the third coat of brush topping.
286
-
-
Fixed Glass Partitions - frameless partition glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, etc, all the necessary fittings upto all height including scaffolding all complete as shown in attached drawing as per the direction of Engineer-in-charge.
9618
-
-
Fixed Glass Doors - frameless patch fitting door consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make floor spring, top patch, pivot, bottom patch, corner lock, H type handle ( standard) & etc., complete. The rate including cost of all materials, necessary fittings upto all height, scaffolding, labour charges, loading, unloading and transportation charges etc., complete as showing the drawing with relevent standard specification and as directed by the departmental Engineer-in-charge.
18
-
-
Providing, cutting and fixing desired 50 mm thickness of expansion joint filler Dura Board HD-100 (closed cell, compressible ,pre-molded Polymer joint filler board ) in black color Manufactured by Supreme Industries Limited Conforming IS Standard IS 1838 (Part-3) Having density of 95kg /Cu. Mt. Non-Staining with less than 1% water absorption & Compression recovery of 93 % minimum as per specifications. Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, scaffolding etc., complete with relevent standard specification and as directed by the departmental Engineer-in-charge.
45
-
-
Providing and laying in panels not more than 20 sqm in plan granolithic flooring with cement concrete 1:1.5:3 using coarse graded aggregate of 6 to 12 mm size laid monolithic with floor concrete and finished smooth with power trowel including preparation of concrete surface and form work. The screed shall be laid for effective separation of panels not exceeding 20 sqm in plan etc and Unevenness in floor finish shall not exceed +2mm in one squaremetre area. Including sprinkling of Nitoflor Hardtop Standard evenly a shake on a ready mixed non-metallic monolithic floor hardening compound with very hard granulates of mineral origin over concrete floor when the concrete in green and touch dry condition at the rate of 5 Kgs/Sqm. Nitoflor Hardtop Standard shall possess a compressive strength of 50N/mm² as per IS: 516-1959, Moh's hardness not less than 8, as per specification and instructions of the manufacturer.
Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, pumping, loading, unloading, preparation of surface, ncessary haccking in RCC surface, power trowel, smooth finishing, fixing of screed dtrips, tools and plants, fuel, curing as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
9340
-
-
Construction of Granular sub-base of 125mm compacted thickness ( Drainage Layer botom most) by providing laying, spreading and compacting of Open graded Material conforming to Grading III of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.
420
-
-
Construction of Granular sub-base of 125mm compacted thickness by providing laying, spreading and compacting of Close graded Material conforming to Grading V of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.
420
-
-
Construction of Wet Mix Macadam 250mm compacted thickness in two layers by providing , laying , Paving , and compacting of aggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensor pavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work.
835
-
-
Providing and construction of Dry Lean Concrete Base course of 150 mm compacted thickness over a prepared sub base with coarse and fine aggregate conforming to IS 383 as per table 600-1 of MORTH specification produced in a batching plant and conveyed in tippers to the laying site with a moisture content as per the design mix and laid with mechanised paver finisher and compacted with a 8-10 tonne vibratory roller to the requisite grade and levels as specified in drawings with adequate curing by covering the surface with hessen cloth and keeping it wet for 7 days. The design mix shall be such that the average compressive strength of each consequetive group of 5 concrete cubes shall not be less than 7Mpa at 7 days. In addition the compressive strength of any individual concrete cube shall not be less tha 5.5 Mpa at 7 days. The concrete mix shall be proportioned with a maximum aggregate cement ratio of 14:1 where OPC is used and 12:1 where PPC or PSC is used. The minimum cement content shall not be less than 140 Kg/Cum of concrete. The rate shall include for all incidentals as specified in clause 601.12 of MORTH
500
-
-
Providing and Construction of M40 Grade Pavement Quality Concrete of 280mm thickness including dowel joints over a prepared Base Course of PCC layer with 53 grade of cement, coarse and fine aggregate conforming to IS 383, coarse aggregate 25 mm & 12.5 mm Granite/Basalt/Trap metal & clean seived approved sand conforming to the gradation asspecified in Table 600-3 of MORTH clause 602., loading materials to cement conrete batch mix plant of adequate capacity ( normaly 25% more capacity than the paving equipment preferably 120 Cum/hour ) as per approved mix design satisfying the characteristic flextural strength of not less than 4.2 Mpa. The mix shall be transported to site in transit truck /tippers/ dumpers of 5-6 Cum capacity, laid with a slip form paver with electronic sensor fitted with vibrators shich shall operate at a frequency of 8000-10000 impulses per minute under load with a maximum spacing of 600mm and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, fixing of Dowel bars and Longitudinal tie bars ,joint filler, separation membrane, sealant primer, joint sealant, debonding strip, curing compound as approved, finishing with power trowel to the required grade, level and alignment, textured with texturing machine, finishing etc.,
-
-
-
making groove cutting for construction joint of size (4 x 10mm) and filling the same with polyurethene sealent, making groove cutting for expansion joint of size (8 x 10mm) and filling the same with polyurethene sealent, providing Isolation joint of 20mm wide to the full depth of the concrete and fixing with isolation pad of 20mm thick and sealing the top with polyurethene sealent to the size of 20 x 20mm and curing (curing shall be as per clause 602.9.12 of MORTH) including cost of all materials, labour, lead and lift, hire charges of machineries , including the initial saw cut and filling of Polysulphide/Polyurethene sealants in contraction, expansion joints etc., complete in accordance with MORT&H technical specification clause No. 602 and with all other incidental charges inclding the trial length and as per the direction of the Engineer-In-Charge of work. (Reinforcement and Dowel bars shall be paid under relevant item)
900
-
-
PLUMBING WORKS
-
-
-
Supplying & fixing in position 15 mm dia brass/ C.P screw down tape (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).(Garden)
30
-
-
Constructing solid block masonry manhole various size of deep in cement mortar 1:3( 1 Cement: 3 M.sand ) R.C.C. Raft & top slab with cement concrete 1:2:4, plain cement concrete 1:4:8 mix for base course (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size )above that 150 mm thick RCC M25 raft slab inculding reinforcement 10mm dia 150mm c/c bothways. Plastering inside walls with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), finished with a floating coat of neat cement ,supplying and fixing SFRC manhole cover with farame of size 600x600 mm , PVC foot rest as per detailed drawing etc the quoted rate shall also necessary excavation and back filling etc complete.complete as per standard design : (the chamber and cover should be got approved by the Executive Engineer before use on works)
-
-
-
Manhole 600 x 600 mm internal size ( Depth up to 1000mm)
6
-
-
Manhole 900x900x1000-1400 mm Size
4
-
-
Manhole 900x900x1500-2400 mm Size
2
-
-
SOIL,WASTE & RAIN WATER SYSTEM:
-
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Internal &External
-
-
-
200mm Dia
50
-
-
160mm Dia
1400
-
-
110mm Dia
620
-
-
75mm Dia
590
-
-
50mm dia
150
-
-
40mm dia
120
-
-
Supplying and fixing PVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.
-
-
-
110mm dia
8
-
-
75mm dia
6
-
-
Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three M sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).
140
-
-
Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron double gratings of size 150 X 150 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).
10
-
-
Making through holes in Plain or Reinforced Cement Concrete with Diamond Core Drilling System by using BOSCH power tools of following diameter in 150mm thick toilet floor slab
-
-
-
100mm dia 150mm thick
110
-
-
200mm dia 150mm thick
53
-
-
200mm dia 180mm thick
40
-
-
200mm dia 200mm thick
15
-
-
Supplying and fixing Lipped Mouth Porcelain Flat Back Urinal(white colour) of size 26.5x31.5x44cm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge.
31
-
-
Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.
50
-
-
Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.
49
-
-
Supplying and fixing heavy duty 15mm CP shower unit comprising of CP 15mm dia hot & cold mixer with CP spout, overhead shower set comprising of CP shower arm, rose etc.,complete with CP wall flanges. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.
4
-
-
Supplying, Installing, Testing and Commisioning the best quality approved make of white glazed floor mounted european water closet with inbuild porcelin cistern 6/3 LPF and wash basin for physically challenge persons (hindware -matrix -70002)with necessary grap railes,hinged railes for support,pan connector bend ,checknut,stopcock etc,. colour solid seat and cover with polythene buffer and flap,CP flanges, CP bolts and nuts,brackets with nuts and boults wall flanges etc, complete ,wash basin shall include 15mm dia CP lever oprareted piller cock with waste coupling , 32mm dia CP bottle trap with extension pipe,supporting bracket with neccesary steel to support the basin 1 No,15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc., complete complying with standard specification and as directed by the department officers.the quality and mak of EWC & wash basin with full set should be got approved by the Executive Engineer before use on work.
5
-
-
Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plug & CP screws etc., complying with standard specification and as directed by the Department officers.
4
-
-
Supplying and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm using rawl plug & brass screws for fixing etc., complete complying with standard specification and as directed by the Engineer Incharge before use on work.
4
-
-
Supplying and fixing CP angle cock with wall flange including cutting and making good the walls wherever required etc., complete complying with standard specification and as directed by the Engineer Incharge before use on work.
120
-
-
Supplying and fixing in position Mirror of size 1000x780mm of approved quality and brand with necessary plastic back PVC frame with bottom stand using brass screws rawl plugs for fixing etc complete complying with standard specification and as directed by the Departmental officers. The colour of frame and quality of mirror should be got approved by the Executive Engineer before use on work
6
-
-
INTERNAL WATER SUPPLY SYSTEM:
-
-
-
Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal
-
-
-
20 mm Dia Cpvc Pipe
900
-
-
25 mm Dia Cpvc Pipe
400
-
-
32 mm Dia Cpvc Pipe
450
-
-
40 mm Dia Cpvc Pipe
60
-
-
50 mm Dia Cpvc Pipe
60
-
-
65 mm Dia Cpvc Pipe
80
-
-
EXTERNAL WATER SUPPLY SYSTEM:
-
-
-
Supplying, laying, jointing, testing & Commissioning of UPVC Schedule 80 pressure pipes as per ASTM D 1785 with Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The quoted rate shall include necessary earth works, fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes. (For under ground or above ground external water supply piping.) Vertical & External including landscape
-
-
-
20 mm Dia Upvc Pipe
60
-
-
25 mm Dia Upvc Pipe
40
-
-
32 mm Dia Upvc Pipe
600
-
-
40 mm Dia Upvc Pipe
650
-
-
50 mm Dia Upvc Pipe
350
-
-
Supplying, installing,testing and commissioning of approved make CONCEALED STOP COCK for toilet including neccesary accessories etc,complete,works include making require size curout in wall,and fixing the control box property,redoing the same etc,complete the quality and make of concealed stop cock should be got approved by concern department Engineer before use on work.
58
-
-
Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre long flexible tube including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.
54
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
20 mm Dia
6
-
-
25 mm Dia
12
-
-
32 mm Dia
40
-
-
40 mm Dia
12
-
-
50 mm Dia
6
-
-
65 mm Dia
6
-
-
Supply, Installation, testing and commissioning of domestic water transfer pump set mounted on a MS skid with electric control panel with cyclic timer, dry run protection, OHT level based operation, pressure switch, pressure transmitter, electrical wiring, cabling with cable tray as specified from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like ball valves, butterfly valves, non return valves, pressure gauges and dead end flanges on suction and discharge headers complete as required. Pump capacity - 3.3 LPS @ 45 mtr head, (DWS OHT Transfer pump) (1working + 1 standby)
1
-
-
Supply, Installation, testing and commissioning of Flushing water transfer pump set mounted on a MS skid with electric control panel with cyclic timer, dry run protection, OHT level based operation, pressure switch, pressure transmitter, electrical wiring, cabling with cable tray as specified from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like ball valves, butterfly valves, non return valves, pressure gauges and dead end flanges on suction and discharge headers complete as required. Pump capacity - 2.5 LPS @ 45 mtr head, (FWS OHT Transfer pump) (1working + 1 standby)
1
-
-
Supply, Installation, testing and commissioning of irrigation water pump from STP with electric control panel with starter, logic controller relays, pressure switch, pressure transmitter, electrical wiring, cabling with cable tray as specified from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like ball valves, butterfly valves, non return valves, pressure gauges and dead end flanges on suction and discharge headers complete as required.Price shall include with required float control arrangment.2 nos. (1working + 1 standby) vertical/horizontal in line, multistage, centrifugal pumps complete in S.S. coupled with TEFC motor Pump Capacity:1.6 LPS @ 35 mtr head (1working + 1 standby)
1
-
-
Supply, installation in position, testing and commissioning of electrically driven Submersible Dewatering pumps of Semi-open non clog impeller with control panel of approved make or equivalent, , necessary wiring, cable alleys, earthing, interlocking, starter with Automatic float type level controlle.PFC should be considered in control panel to monitor ON/OFF/TRIP status of the pump in BMS(2 set=2W+2S)(Location: WTP plant room&STP Plant Room)Pump capacity:1.1 LPS @ 13 mtr head
2
-
-
Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs. following references from SR-TWAD Board
-
-
-
300mm
120
-
-
150mm
280
-
-
Reaming from 200mm dia pilot bore to 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level.
400
-
-
Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 ( 1.1 (4,6,3),
-
-
-
200mm dia CS
48
-
-
200mm dia RS
72
-
-
150mm dia RS
280
-
-
Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.
-
-
-
200mm dia CS
48
-
-
200mm dia RS
72
-
-
150mm dia RS
280
-
-
Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.
4
-
-
Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield
test by 'V' notch method.
32
-
-
Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.
4
-
-
Supplying and fixing Ductile Iron manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement,two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by the Engineer-in-charge.
12
-
-
Fabricating and fixing of Puddle flanges in water tanks with making in G.I 'C' Class pipe with Hot Dip Galvanizing 6mm thick plate alround 3" / 6" with proper thread on the pipes and necessary flanges for bigger diameter pipes, etc. complete. (the puddle flanges sholud be got approved by the Executive Engineer before use on works) The rate including cost of all materials, Fixing charges, Labour charges and Transportation charges etc., complete with standard specification and as directed by the departmental engineer-in-charge.
-
-
-
150mm GI Puddle Flange
2
-
-
100mm GI Puddle Flange
2
-
-
80mm GI Puddle Flange
4
-
-
65mm GI Puddle Flange
2
-
-
50mm GI Puddle Flange
8
-
-
40mm GI Puddle Flange
17
-
-
32mm GI Puddle Flange
8
-
-
Design, supply, installation, testing and commissioning of 35 KLD Sewage treatment plant (STP) with MBBR technology FBBR system: bar screen chamber, grit chamber, primary collection-equalization tank, raw sewage transfer pump set with standby, aeration tank - MBBR reactor, air blowers, motor for blower, tube settling tank, sludge pump set with standby, sludge holding tank, sludge drying beds, processed sewage collection tank - filter feed tank, filter feed pump set with standby, pressure sand filter, activated carbon filter, treated sewage collection tank, electrical panel board.
FBBR system: bar screen chamber, grit chamber, primary collection-equalization tank, raw sewage transfer pump set with standby, aeration tank - MBBR reactor, air blowers, motor for blower, tube settling tank, sludge pump set with standby, sludge holding tank, sludge drying beds, processed sewage collection tank - filter feed tank, filter feed pump set with standby, pressure sand filter, activated carbon filter, treated sewage collection tank, electrical panel board.
1
-
-
Supply, installation, testing and commissioning of water treatment plant, which contains Pressure Sand filter, carbon filter and chlorination system (5000 LPH) with required pumps and accessories as required
1
-
-
Supplying and erecting in position of following 1000 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc., complete. The rate excluding civil works and including cost of all materials, Installation and trial run, labourcharges, loading and unloading charges, Transportation chargse etc., complete with relevent standard specificaion and as directed by the departmental Engineer-in-charge.
1
-
-
Construction of Rain water Recharge well (1500mm dia) as per consultant drawing with necessary connections, Earth work - digging the well for recharge well.
supply and installation of Reinforced concrete Rings - 5 feet OD & 1 feet Height, 50 MM Thick - 10 no's.
supply and installation of Reinforced concrete slab- 5 feet in dia, 200 mm thick, and 25 mm perforated - 8 mm mild steel rods used for reinforcement -1"" Perforated - 1no's.
supply and installation of Reinforced concrete closing slab - 3 feet in dia OD, 75 mm thick, 8 mm mild steel rods used for reinforcement with 600mm x 600mm Square FRP/Plastic manhole cover - 1no's.
supply and installation of MS grating - 6*6inch square - 2no's
Filtration Media Installation For recharge Well Unit: 40 mm crushed stones - 0.12cum, 20 mm crushed stones - 0.12cum, Brick Bats - 0.12cum, Mixture of Brick Bats and Gravels for filling the gap between excavated earth and RCC rings- 1.6cum
-
-
-
Shifting of excavated earth to the approved / authorised dumping yard as directed by the authorities / Site in charge.
supply and installation of `V' WIRE SCREEN - 0.75 mm Slots. SS-304 Material - 0.5 mtrs Height - 6 "" diameter - 2no's
Drilling a bore well - 200mm dia by high speed compressor- 4MTRS.
supply and installation of 110mm PVC PIPE PN-6 - 4 rmtr, 110mm PVC PIPE PN-6 Perforated with 10 mm Zigzag holes to easy percolate the water - 4 rmtr, 12mm Gravel Packing between bore well hole and PVC pipe and Inserting into the Bore Well- 4 mtrs.
supply and installation of - 180GSM Gio-fabric sheet to cover V-Wire screen,
Shifting of excavated earth upto 1000mtrs as directed by site in charge. (the well sholud be got approved by the Executive Engineer before use on works)
-
-
-
Size - 1500mm diameter, 4.0 mtr depth and 200mm dia bore upto 4 rmtr.
18
-
-
ELECTRICAL WORKS
-
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4points / Coil) Higher End
291
-
-
Wiring, testing and commissioning of 2Rx1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC conduit pipe on concealed wall and ceiling with PVC accessories in flush continuous earth wire connection by 1 sq.mm. PVC insulated SC unsheathed copper wire , ISI marked concealed in ceiling with PVC accessories for additional light (length of point upto 6 mtr) (SD-313) (6 Points/coil)
103
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V PVC conduit pipe concealed wall and ceiling with PVC accessories GI metal back box and 6A modular switch & 6A modular Socket ( board itself Point ) in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point (8 points/coil)
66
-
-
Wiring with 3R x1.5 sq.mm. (22/0.3) and 1 run of 1.0 Sqmm PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1 run of 1.0 Sq.mm wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End
36
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade Pvc conduit pipe on concealed wall and ceiling with Pvc accessories GI metal back box and 6A modular switch & 2 module Fan Requlator in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point (length of point 7.5 to 9.0 mtr)
(4 points)
72
-
-
Lift Shaft Wiring : Wiring, Connecting, Testing & Commissioning for lift well light point and 6Amps power socket outlet for all 4 floors with 2 x 2.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 2.5 sqmm FRLS PVC insulated standed copper conductor cable as earth wire in MS conduit including providing and fixing switch box, 2 Nos. of 5A single way module switch (for controlling light point and socket Outlet ) for each floor of the lift well , with bulkhead lamp 1 No. 5A 5 Pin shuttered socket outlet with flush type switch for each floor of the lift well and making necessary connections complete etc. ( 6 points)
12
-
-
Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections and Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End
64
-
-
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.
100
-
-
Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.
52
-
-
Supply and fixing of manufacturer's GI metal back box and 3 nos of 6A modular switch, 3nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
20
-
-
Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection complete with all accessories as required as per the site condition. (For AC Plug)
41
-
-
Supply and run of 2Run 1.5(22/0.3) sqmm and 1R of 1.0 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe with 2 mm thick, ISI marked on wall and ceiling with continuous earth wire connection with painting of suitable colour.
1860
-
-
Supply and run of 2 Run x 2.5 sqmm and 1R of 1.5sq sqmm PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.
3635
-
-
Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of Grade in suitable MS Conduit pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour.earth wire connection of 2.5 sq.mm wire PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour (for Bus bay fitting, 15 Amps socket, 20 Amps AC socket)
3726
-
-
Supplying, installation, testing and commissioning of 32 AMPS SPN industrial plug & socket for Bus depo dock with 32 Amps SP MCB in Manufactures box fixed flush with the wall including cost of material, necessary interconnection etc, with earthing etc., all complete and as directed by the departmental officers.,
4
-
-
Supplying, installation, testing and commissioning of 32 AMPS TPN industrial plug & socket for e vechicle charging with 32 Amps 4P MCB in Manufactures box fixed flush with the wall including cost of material, necessary interconnection etc, with earthing etc., all complete and as directed by the departmental officers.,
4
-
-
Supply and fixing of 63A TPN MCCB WITH ENCLOSURE-for Lift. The Enclosures shall be IP 65 with transparent flaps or Doors. The Enclosure shall have flaps to access the circuits based on the specific circuit requirements. The doors / flaps shall be made of Thermoplastic Polycarbonate and the rest of the Board shall be made of Polysterene.In case of extreme outdoor conditions as high UV radiation, the board shall be made of complete Polycarbonate material ( Please follow special remarks at the end of the specifications). The Distribution board shall be surface type and internal screws used for mounting Din Rails & fixing of the board shall be made of stainless steel V2A screws.Blanking strips shall be provided to ensure closure of unused module spaces. The Enclosure shall be with multi-level knockouts for cable glands.(Lift Control )
3
-
-
Supply and laying of following size 25mm dia PVC conduits in floor/wall/ceiling etc.including necessary bends, elbow,etc,in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose & for work station etc.)The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface
360
-
-
Supplying and concealing modular type TV /Telephone socket with top pin with suitable with concealed type manufacturer's GI metal back box and TV / Telephone modular socket in flush with wall mounted on poly carbonate front plate with socket mounting metal parts, for making good of the concealed portion with suitable colour.
14
-
-
DISTRIBUTION BOARD
-
-
-
Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.
6
-
-
Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
5
-
-
Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.
4
-
-
Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush wall with earth connection only.
6
-
-
Supply and fixing VERTICAL THREE PHASE MCCB DISTRIBUTION BOARD WITH MCB 8way per phase, flush type fitted with bus bars and neutral links with 15 numbers of 20/32 Amps Single Pole MCB & 2nos of 40A triple pole MCB, one number of Four Pole 100 Amps MCCB/Isolator with ISI mark etc., all Complete, complying with relevant standard specification and as directed by the Departmental Officers. with IP 42 Protection.
1
-
-
Supply and fixing VERTICAL THREE PHASE MCCB DISTRIBUTION BOARD WITH MCB 4 way per phase, flush type fitted with bus bars and neutral links with 2 numbers of 20/32 Amps & 2nos of 40A triple pole MCB, one number of Four Pole 100 Amps MCCB/Isolator with ISI mark etc., all Complete, complying with relevant standard specification and as directed by the Departmental Officers. with IP 42 Protection.
2
-
-
Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.63A 4P MCCB switch as incoming and 2 nos.32A 3P MCB , AND 6nos 16 SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End
3
-
-
Supply and fixing VERTICAL THREE PHASE MCCB DISTRIBUTION BOARD WITH MCB 8 way per phase, flush type fitted with bus bars and neutral links with 8 numbers of 20/32 Amps & 4nos of 40A triple pole MCB, one number of Four Pole 100 Amps MCCB/Isolator with ISI mark etc., all Complete, complying with relevant standard specification and as directed by the Departmental Officers. with IP 42 Protection.
2
-
-
Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 42 / Weather proof Protection Double Door type with powder coated including all interconnections and accessories like bolts, nuts and associated civil works, etc; The rate shall be inclusive of necessary cable/conduit adopter boxes for IN and OUT wiring. 6 W TPN Outdoor DB - ( External Lighting - Outdoor type with suitable Pedestal frame with lock and key )
Supply,Erection, Testing and Commissioning of the following Type feeder pillar enclosure with MCCBs / MCBs /ELCBs, / Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the CMDA department requirement.
Incomer 63 A TPN MCCB with Timer control On/OFF 32 SP MCB - 18 Nos : 6W TPN Outdoor DB. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. The rate shall be included to fixing the DB where as in concealed / or open as per site condition.(Street light Control DB)
1
-
-
Supply and fixing of 12way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) 1No. 32A 30 MA 4 Pole ELCB as incoming and 10 Nos. 6A to 32A SP MCB outgoing in flush with wall.The MCB DB and MCB's should be with ISI mark (like standard make)
12
-
-
Supply and fixing of double door type 12way SPN MCB board with IP 42 Protection with 20A 2 pole MCB isolator as incoming and 6Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be with the ISI mark etc., all Complete, complying with relevant standard specification and as directed by the Departmental Officers.
2
-
-
Supply and fixing of 63A/40A 4P MCB in Metal sheet enclosure in surface / concealed configuration including and connecting accessories with earth connection (SD-140)
1
-
-
LIGHT FITTINGS
-
-
-
Supply, installation, testing and commissioning of 40W LINEAR LED light fitting with cool day light, made out of CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. Model No : CCP-121-28-57-SL-NWH
228
-
-
Supply and Fixing of 20W 4' LED Tube Light with PVC unsheathed copper leads from terminals to the fitting. (Make : Philips/Crompton/Havelles )
148
-
-
Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive. Model no : LCDSPLN-R -18-CDL
134
-
-
Supply, installation, testing and commissioning of 36 W LED 2X2 light fitting with cool day light, made out of CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive. Model no : LCTLRNE-36-FO-CDL
30
-
-
Supply, installation, testing and commissioning of 9 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive. Model No : LCDEP-09-CDL
14
-
-
Supply, installation, testing and commissioning of 10w integrated LED Bulk Head luminaire comprises of die cast housing,diffuser & frame inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive. Model No : LBHE-10-CDL
18
-
-
Supply, installation, testing and commissioning of 70w Wellglass with advanced designed vertical fins which aides in zero dust accumulation. Luminaire has an efficacy of 110 lm/W. Ingress protection of IP66. made of Pressure Die Cast Aluminium housing, inter connecting wiring and fixing of Heavy duty High bay light fixture Suitable S -hook including accessories all inclusive. Model No : TIP-311-70-57-SL-CP-NSG
107
-
-
Supply, Erection,Testing and Commissioning of 8mtr high hot dipped galvaniszed octogonal pole with 120W LED light Fitting. The Pole shall have bottom 155mm A/F top 70mm A/F made up of 3mm thick HT sheet Steel plate along with 300 x 300 x 12 mm base plate and 1.5 mtr single arm bracket Suitable for above pole of ultimate strength 410 mpa IS 2713( part II )1986. Suitable for mounting 1 no of 120W LED Street Light Fitting including base plate and Concreate Foundation with M24 x 750mm long J type Foundation bolts( EN8grade). The Pole Should be Provided with 6 Amps SP MCB housed in Weather proof box DP 6 Amps MCB 4 way 30 Amps Rated terminal block for loop in and loop out cable arragnements, SMC box for Loop in and loop out including earth with 1 mtr long 25 mm dia B class GI pipe as Earth Electrode with charcoal, salt with 10 SWG GI Wire interconnected with street light Pole. Cable Entry & Exit in GI pipe of 2.5" Dia fitted in pole with clamps and as per drawing and technical specification.
44
-
-
Supply, installation, testing and commissioning of 20M HIGHMAST continuously tapered, polygonal cross section of at least 20 sides conforming to as per IS 875 (part 3) 1987 for loading. High mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a polygonal
section. Masts are in two sections for 20 Mtr having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with a fully penetrated flange which is
free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimination of helical stress concentration. For environmental protection of the mast, the entire
fabricated mast is Hot Dip Galvanised (Single Dip) internally and externally, having uniform coating thickness of 85 / 65 microns for bottom / top sections respectively.To be supplied with required ACCESSORIES, TWIN L E D AVIATION LUMINAIRE, FEEDER PILLAR, 12 nos 400W L E D FLOOD LIGHT, along with ERECTION OF HM WITH ACCESSORIES, CIVIL FOUNDATION and Other Works, Earthing with Charcoal as required, Erection of Highmast Feeder Pillar with Armoured Cable, CONNECTING CABLES FOR JB ON HM LANTERN, Transportation and Crane Charges ( Model No : HM-1220 + HM-1220-ACC + GLN-704 + HM-FP + CFS-506-400-57-60D-SL-GL-NSG)
6
-
-
Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1metre down rod with fan clamp, and wiring to the neary by point with 1.5 sqmm FRLS , PVC insulated copper wires, including ncessary accessories and harwares as required.
72
-
-
Supply and fixing of 375mm(15")sweep (Heavy duty) AC Exhaust fan complete with provision of holes in the wall including all required accessories.
18
-
-
Supplying, installation, testing and commissioning of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories.
7
-
-
Supply, Installation, Testing & Commissioning of 60W LED LANDSCAPE LIGHT Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection. Decorative post top for 360 degree Indirect light with IP 65 protection, Resistant to impact and corrosion. Glare-free and better uniformity. MAPLE LPTO-60-WW-M make :Crompton Features and details
Aesthetically designed and soft illumination effectumens : 2450 lm
power : 60W colour : multi colour
Included components : post Top Rate shall inclusive of necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application. Crompton CAT REF : - MAPLE LPTO-60-WW-M Equivalent.
10
-
-
Supply, Installation, Testing & Commissioning of 10W LED bollard light fittings Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be require with lumen package as per requirement. Crompton CAT REF : - LBLA3-10-CDL / Equivalent-(LANDSCAPE LIGHT). rate shall inclusive of necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application .
25
-
-
Supply, Installation, Testing and commissioing of Sturdy & heavy duty aluminium blade for higher air delivery | Sleek & stylish design 120 spokes nickle chrome plated guard | Smooth oscillation 600MM SWEEP, 100W MOTOR, 1400RPM, 110CMM AIR DELIVERY with Suitable switch socket outlet for maintenance isolation.(AIR CIRCULLATOR FAN)
10
-
-
Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
250
-
-
Supply and Laying of 3 1/2 x 150sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
125
-
-
Supply and Laying of 3 1/2 x 95sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
325
-
-
Supply and Laying of 31/2 x 35sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
875
-
-
Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.(SD-745)
1500
-
-
Supply and Clamping of 3 1/2 core x 185 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-229)
150
-
-
Supply and Clamping of 3 1/2 core x 150 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-228)
150
-
-
Supply and Clamping of 3 1/2 core x 95 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-226)
225
-
-
Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-223)
350
-
-
Supply and Clamping of 3 1/2 core x 25 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. (SD-222)
330
-
-
Supply and Clamping of 4C x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
1600
-
-
Supply and laying of 3.5CX 25sqmm Cu. armoured LTUG Cable in the existing cable tray
125
-
-
Supply and laying of 4CX16sqmm Cu. armoured LTUG Cable in the existing cable trench
300
-
-
Supply and laying of 3CX2.5sqmm Cu. armoured LTUG Cable in the existing cable trench
2600
-
-
Supply and laying of 8CX2.5sqmm Cu. armoured LTUG Cable in the existing cable trench
100
-
-
Supply and fixing of brass cable gland for 3.5 x185 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. (SD 193)
12
-
-
Supply and fixing of brass cable gland for 3.5 x150 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. (SD 192)
6
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 95 Sq.mm PVC LTUG armoured cable with earth connection
22
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection
28
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection
12
-
-
Supply and fixing of brass cable gland for 3.5 x25 sqmm Copper cable XLPE armoured LTUG cable with earth connection. SD-186
10
-
-
Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.
166
-
-
Supply and fixing of brass cable gland for 4C x16 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cable LTUG cable with earth connection.
214
-
-
Supply and fixing of brass cable gland for 8C x 2.5 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and providing cable end termination of 3 1/2 X 185 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
12
-
-
Supply and providing cable end termination of 3 1/2 X 150 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
6
-
-
Supply and providing cable end termination of 3 1/2 Core x 95 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
22
-
-
Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
28
-
-
Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
12
-
-
Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm Copper armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
10
-
-
Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
166
-
-
Supply and providing cable end termination of 4 C x 16sq.mm Copper armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
10
-
-
Supply and providing cable end termination of 3C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
214
-
-
Supply and providing cable end termination of 8C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be IP Rated for outdoor applications, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529
107
-
-
Supply and installation of following size of GI Ladder / preforated cable tray including pre fabricated horizontal and vertical bends, reduces, tees, cross members with 300 mm spacing and other accessories as required and duly suspended from the ceiling, wall with MS angles, channels, suspenders, including painting, anchor fasteners, civil works etc., as required as per specification.
-
-
-
Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height
900
-
-
Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height
100
-
-
Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 450mm width and 50mm height
100
-
-
LADER TYPE TRAY
-
-
-
450 X 50 mm lader Type Tray
100
-
-
300X50mm lader Type Tray
100
-
-
150X50mm lader Type Tray
100
-
-
Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.
3456
-
-
Earthing
-
-
-
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 50mm and 2 mtr long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs of carbon based environment friendly backfill compound and suitable clamp and with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
12
-
-
Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.
15
-
-
Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.
304
-
-
Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive
-
-
-
25mm x 6mm CU Flat ( SD-77 )
425
-
-
25 mm x 6mm GI Flat ( SD-77 )
1170
-
-
No.8 Hard drawn Cu wire (90mtr)
2100
-
-
No8 SWG GI
750
-
-
Lightning Protection System
-
-
-
LIGHTING ROD
Supply of Early Streamer Emission Air Terminal (ESEAT).
Model: S
The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required ), collects energy from the ambient electric field. The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is available to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : S - Radius of protection : 46 Metres Level of protection considered for the Project-II level
2
-
-
MOUNTING STRUCTURE
Supply of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD
class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter
2
-
-
DOWN CONDUCTOR
Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth
connection
300
-
-
TEST LINK
Supply of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance
4
-
-
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
4
-
-
SURGE PROTECTION
Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)
2
-
-
Supply and Run of 2 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with painting of suitable colour.
100
-
-
CT Metering Panel (as per the TANGEDCO norms) - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 2 MM Thickness CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., RYB indication lamps, internal wirings, Digital voltmeter and Ammeter and other required accessories for the complete operation as per the Tangedco requirements. Necessary approval to be obtained from Tangedco before procurement including all associated control wiring. 1set of 400/5A CT with TNEB metering provision and 1 nos of 400A /5A CT for APFC.. For all items in this section, the rate includes necessary supports as required at site. No extra payment will be made for the same. Rate shall inclusive of factory witness test and all accessories, breakers , control wiring, models has to be followed as per in the technical specification.
1
-
-
400A Isolator Panel - Supply, Installation, Testing and Commissioning of CPRI approved make of 450A TPN MCCB panel, cubicle type, Free standing, floor mounted, single front, 2 MM Thickness CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors
1
-
-
Supply, installation, testing and commissioning of 65 KVAR Automatic power factor correction panel ( APFC ) with 6 steps of capacitor switching cubicle type, free standing, Powder coated, 2mm Thickness CRCA sheet steel, enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 8 stage Digital Automatic power factor correction, ( APFC ), Auto / Manual selector switch, cluster LED type indicators, in the incomer, complete with electrolytic grade aluminium bus bars, MPP type Power capacitors, with 25 KVAR x 1 no., 20 KVAR x 1 no.,10 KVAR x 1 no. 5 KVAR x 1 nos. 2.5KVAR x 2no. Contactors, MCCB’s, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting, Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, MV panel sensing CT interconnecting wiring etc., all inclusive.
1
-
-
MAIN PANEL :Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with DG/EB Multifunction Meter 1no and 1no 400A Four Pole Auto Transfer Switch , 1no 125A Four Pole Auto Transfer Switch and Main 1no Solar source Incoming of 250A 4Pole MCCB's, 4nos of 160A Four Pole MCCB, 2nos of 100A 4Pole MCCB's, 6nos of 125A 4Pole MCCB's, and 7nos of 63A 4Pole MCCB's for O/G with suitable copper bus bar (33x6mm) having, outgoing Feeder in 4 Nos Of Multidata Meter Shall be Provided with IBMS Control Wiring with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
SHOP PANEL :Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter incoming of 1 NO OF 125A TPN MCCB , 14nos of 40/63A, DP MCB 10 kA,with SinglePhase Energy Meter - for O/G with suitable copper bus bar (33x6mm) having ,IBMS Control Wiring with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
Fire Panel - :Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 1 NO OF 125A TPN MCCB , 5 nos of 63A, TPN MCCB 25 kA,with SinglePhase Energy Meter - for O/G with suitable copper bus bar (33x6mm) having ,IBMS Control Wiring with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
Lift Panel - :Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 1 NO OF 160A TPN MCCB ,4 nos of 125Amps 4P MCB, 4 nos of 63A, TPN MCCB 25 kA,with SinglePhase Energy Meter - for O/G with suitable copper bus bar (33x6mm) having ,IBMS Control Wiring with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
High Mast Panel - Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 1 NO OF 125A TPN MCCB ,7 nos of 63A, TPN MCCB 25 kA, 10 nos of 32A, DP MCB 10 kAwith - for O/G with suitable copper bus bar (33x6mm) having ,IBMS Control Wiring 63A 3 Phase 4 Pole Contactor ,24 Hours Programmable Timer Switch with Shortest Switching Time15 Minutes ,1.5 sq.mm. copper flexible cable , with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
UPS OUTGOING PANEL - Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 1 NO OF 100A TPN MCCB , 9 nos of 32A, TPN MCCB 25 kA, 1 nos of 63A, TPN MCCB 25 kA, for O/G with suitable copper bus bar (33x6mm) having IBMS Control Wiring , with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
Lighting Panel - Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 1 NO OF 125A TPN MCCB , 9 nos of 63A, TPN MCCB 25 kA, for O/G with suitable copper bus bar (33x6mm) having ,IBMS Control Wiring , with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
Power Panel - Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 1 NO OF 160A TPN MCCB , 9 nos of 63A, TPN MCCB 25 kA, for O/G with suitable copper bus bar (33x6mm) having IBMS Control Wiring , with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
DG Panel - Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter , 2 no of 250A TPN MCCB , AND 1 no of 125A TPN MCCB 25 kA, Bus Coupler of - 125Amps TPN MCCB -1 2 no of 400Amps TPN MCCB 25 KA, 2 no of 125Amps TPN MCCB 25 KA for O/G with suitable copper bus bar (33x6mm) having three phase Preventor, incterlock and Control wiring IBMS Control Wiring , with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete.
1
-
-
Supply, erection, testing, commissioning of 100KVA DG Set With Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 100 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 1day capacity Litters fuel tank, 2x12V 120 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., all inclusive.
2
-
-
Supply, erection, testing, commissioning of 62.5KVA DG Set With Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 62.5 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 1day capacity Litters fuel tank, 2x12V 120 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., all inclusive.
1
-
-
Supply, Installation of 10KVA 3P/3Pconventional type UPS with 15min battery backup with necessary interconnection cables, breakers, MS stand etc as required
1
-
-
Design, Supply, Installation, Testing & Commissioning of stainless steel lift: 13 Passenger Elevator, 3 stops with machine room as per Specification & Details following Below : Passenger Type Elevator, No. of Units 1, Capacity -26 Person, Speed 1 m/s, Stops & Openings 3 stops & 3 openings, Single entrance car, Travel height 20 m, Head Room height as per drawing, Pit Height as per design, MAP Floor Position Topmost floor, Car dimensions 2000 mm wide x 1600 mm deep x 2400 mm height, Door dimensions 800 mm wide x 2100 mm height, Door type Two-panel centre opening Plain Panel, Car Operating Panels are Stainless Steel Face Plate, Segmented LCD display Square surface mounted Buttons. The Surface to be finished with- Car Panel & Door SS Finish ,SS Handrail at Rear Side, LED light Provision and Flooring as per Client requirement. .The work to be completed as per design and approval of the Architect, etc. complete. (Rates includes submission of drawing ,liasioning works with ceig and obtaining approval, licence and safety certificate for operations of lift.)
3
-
-
First Aid Box complete with all First Aid Medicines (M-1977)
3
-
-
Shock Treatment Chart fixed in glass frame (M-1978)
5
-
-
Danger Board as required by the Electrical Authorities (M-1981)
5
-
-
Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms (M-1982)
5
-
-
2m x 1m Rubber Mat suitable for 11 KV installation confirming to IS (M-1976) (5 set)
2
-
-
FIRE FIGHTING WORKS
-
-
-
Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpsetof 900 LPMat 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant pointto make 30 m water jet at the timeof firefightingemergencycicumstances,coupledwith11KW/ 15 HP rated three phase 414 volts, 50 Hz, 2880 rpmelectrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia.,including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)
3
-
-
Supply, errection, testing and commissioning of Fire Fighting Electrical Control Panel of 15 HP, 415 V, 50 Hz Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R,Y,BPhaseIndicationLamp,VoltMeter(0-500V), Ammeter(0-50A),VoltMeterSelectorSwitch-1set c. 32 Amps Power Contactor with 230 V Coil,14 - 23 Amps Over Load Relay - 1 set d. SinglePhasePreventer-1No. e. IndicationLampforMotorON/OFF/TRIP-1set f. AUTO / MANUAL Selector Switch, ON / OFF PushButton - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover,Presure switch&Support angle The above panel mounted on wall using anchor fasteners bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard methods and as directed by the Departmental Officers..
3
-
-
Supply and laying of 4 core 10 sq.mm. armoured copper cable forpower wiring to the Terrace Pump Motor withruns of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
120
-
-
Supply and laying of 2 core 1.5 sq.mm. armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
120
-
-
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method ofarc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standardspecification and as directed by the Departmental Officers.Make: JINDAL / EQUIVALENT.
-
-
-
150 mm
450
-
-
100 mm
580
-
-
80 mm
265
-
-
40 mm
1800
-
-
25mm
2440
-
-
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
100mmdia
20
-
-
FIRE HYDRANT SYSTEMS:
-
-
-
Supply, erection, testing and commissioning of Cast ironbody and Gun metal or stainless steel internal Non-return valve of followingsizes to control one way flow of water to be installedpump room at delivery line and near overhead tank at terrace level near to jockey pump and motorincluding necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
100mmdia
3
-
-
Supplying, erecting and commissioning of Hydrants
-
-
-
Servicing the SS Hydrant Valves by disconnecting from pipe line, dismantling, checking the operation of rotating spindle, replacing rubber 'O' ring of valve seating, repalcing rubber gasket of 80mm dia OD x 65mm dia ID, repalcing the 5/8" x 21/2 bolt, nut, washers, re-connecting with hydrant system as per standard methods and as directed by the Departmental Officers.
12
-
-
Servicing the First Aid Hose Reel Drum assembly by disconnecting from hydrant line, replacing shut off nozzle, warm clip, lubricating the rotating assembly, replacing 20mm dia, 30 metres long rubber hose, re- connecting with hydrant system as per standard methods and as directed by the Departmental Officers.
24
-
-
Supply, erection, testing and commissioning of Fire Fighting2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the DepartmentalOfficers. (Make: KIARTAR / OMEX / EQUIVALENT)
4
-
-
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.
3
-
-
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
-
-
-
100mmdia
150
-
-
80mmdia
150
-
-
FIRE EXTINGUISHERS
-
-
-
Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.
-
-
-
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. CO2 6kg& 4kg for EB room etc.Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
14
-
-
Supply and fixing of stored pressure ABC (Mono AmmoniumPhospate)PowderTypeFireExtinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mountingbracket, safety clip etc., including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
14
-
-
Supply and kept in positionof 9litres capacity FireBucketsof 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers
7
-
-
Supply and fixing in position of Fire Fighting Duct Window having proper glass window type double door with universe open key, painted inside white andoutsid post office red for the sizes of 1300 x 900 x 500mm (L x B x D) fabricated using 25 x 3mm MS 'L' Angle and all sides covered with 2mm thick MS sheets, suitable arrangements to kept 2 Nos. of Fire Fighting Hoses and 1 No. Branch Pipe, mounted in fire duct using anchor fasteners, etc., as per standard specifications and as per directed by the Departmental Officers.
12
-
-
Supplying,Installing,testing and commissioning of Test & Drain valve of size 50mm.
12
-
-
FIRE ALARM SYSTEM
-
-
-
Supply, installation, testing and commissioning ofMicro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply,consisting230/24voltSMPSunit,2Nos.of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
2
-
-
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standardmethodsandasdirectedbytheDepartmental Officers.(Make: Ravel / Equivalent)
16
-
-
Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixingaccessorieslikescrews,plug,clampsandetc.,as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)
16
-
-
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers.
1200
-
-
Supply,Installation,Testing and commosioning of Photovoltaic type smoke detector,DC Voltage ranging from 8V to 30V and it draws 10ampere current and it has bicolour LED detector status indicator with programmable sensitivity. It has the advanced maintainence features via remote hand held test unit.MAKE-RAVEL/SYSTEM SENSOR/ APOLLO.
17
-
-
Supply,Erection,Testing and commisioning of conventional type heat detector with Operating Voltage ranging from 8.5 to 35 volt DC, humidity ranging from 5 to 95%RH and it will detect temperature in the ranger of 90 deg celsius and it has 194 deg Fahrenheit fixed temp, single circuit mechanical heat detector. MAKE-SYSTEM SENSOR
6
-
-
Supply,Erection,Testing and commisioning of fire man switch for Lifts
6
-
-
Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump Rated for 2280 LPM at 70 metres head withElectrical Motor of 60 HP of 415 volt 3 phase connection complete with base plate and accessories. (Make: Kirloskar or Equivalent).The rate inclusive of necessary vibration, bad mounting etc., as per standard method as directed by the Deparmental Officers.
1
-
-
Supply, erection, testing and commissioning Mono Block type Fire Fighting Pressurisation Pump of 180 LPM 110 metres head at 10 HP with suitable base frameincluding necessary vibration bad mounting etc., including conveying, fixing and incidental charges., etc., completeas per standard specification and as directedbytheDepartmentalOfficers.(Make:Kirloskar
6
-
-
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of following and complete in all respects as required.
a. End suction, top discharge centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal to ensure a minimum pressure of 3.5 kg. / sq. cm at highest and farthest outlet at specified flow of 2280 LPM at 70m head conforming to IS 1520.
b. 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dyanamo, solenoid switches etc.
c. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre-filter, after filter etc.(Make: Kirloskar / Equivalent).
d. Exhaust system having flexible metallic mufler,100mm dia MS heavy pipe extended upto 1m, outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition.
-
-
-
e. Dash board consisting the instruments like temperature gauge, galvano type DC Ammeter, lubricant oil pressure gauge, ignition switch, emergency stop and all other protection equipment as per specification, stop seleneid for auto stop in the event of fault with audio indications, painted with post office red colour etc., as required.
f. 12 V / 24 V storage battery, maintenance free tape, 180 AH rating, MS fabricated common baseplate, coupling guard, foundation bolts etc., as required.
g. Positioning the diesel engine driven fire pump over cement concrete foundation using suitable size anti-vibration mounting arrangement.
All works carried out as per standard methods and as instructed by the manufacturer and as directed by the Departmental Officers. (Make: Kirloskar / Equivalent)
1
-
-
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges,neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standardspecification and as directed by the Departmental Officers.Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
450
-
-
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
1800
-
-
Supply, erection, testing and commissioning of Heavy Duty Foot Valve including all accesories, such as, MS flange of table ‘E’, gaskets, bolts & nuts, etc., installed at end of 150 / 200mm dia suction pipe line at sump including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary, etc., complete and as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
150 mm dia
3
-
-
SupplyandfixingofWaterCO2StoredPressureType9 litres capacity Fire Extinguisher as per new IS 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wallmounting bracket, safety clip, etc., as directed by the Departmental Officers.
5
-
-
Supply, erection, testing and commissioning ofPressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the DepartmentalOfficers.Make: H- GURU / ISI MAKE / EQUIVALENT.
3
-
-
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI MAKE / EQUIVALENT.
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements