Chennai Metropolitan Development Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Chennai Metropolitan Development Authority Tender
Publishing and Printing
Eprocure
Opening Date19 Sep 2023
Closing Date3 Oct 2023
Tender AmountRefer Documents
Costs
EMD
₹ 9,45,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CMDAC_371257_1Bid Award Id
ViewTender No
03/2023-24Tender Authority
Chennai Metropolitan Development Authority ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling and removing the AC Sheet Roofing without roof timbers and clearing away and carefully stacking material for reuse etc., complete complying with standard specification and as directed by the Departmental officers.
64
-
-
Dismantling and removing the Wrought and put-up Framed Timbers in roofs / floors and clearing away and carefully stacking material for reuse etc., complete complying with standard specification and as directed by the Departmental officers. SOR unique Code - W-0028 (674 +67.4) p.no: 22
10
-
-
Dismantling and removing the Brick / Stone Masonry in cement mortar walls under 3m high and clearing away and carefully stacking material for reuse etc., complete complying with standard specification and as directed by the Departmental officers.
21
-
-
Dismantling removing Reinforced Cement Concrete work and etc.,by mechanical means including stacking of steel bars and disposal of unserviceable material within 50m lead as per direction of Engineer in charge
118
-
-
EARTHWORKS
-
-
-
Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.
-
-
-
Below 0 to 2 meter
4421
-
-
Below 2 to 3 meter
2200
-
-
Below 3 to 4 meter
2190
-
-
Below 4 to 4.5 meter
1314
-
-
( FOR SHORING WORK)
-
-
-
Section includes the design and installation of temporary excavation shoring or underpinning required for construction of the structure. Shoring system may be Temporary or Permanent depending on the system provided by the contractor. Basement
730
-
-
Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
.
441
-
-
PLAIN CONCRETE WORKS
-
-
-
Plain Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
226
-
-
Supplying and filling in foundation, basement, etc with filling Gravel in well rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
3520
-
-
REINFORCED CEMENT CONCRETE
-
-
-
Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. Rate to include all designing the mix, batching plant, mechanical mixing, transpoting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer- in-charge
-
-
-
a) Upto Basement
2215
-
-
b) Ground Floor
408
-
-
c) First Floor
405
-
-
d) Second Floor
411
-
-
e) Terrece Floor
70
-
-
REINFORCEMENT STEEL
-
-
-
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
499075
-
-
FORM WORK
-
-
-
Supplying and erecting steel centering sides and soffits including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm center to center or at suitable intervals, etc. complete in all floors complying with standard specification. (Payment for centering shall be given after the concrete is laid)
-
-
-
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
10512
-
-
For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.
817
-
-
For plane surfaces such as rectangular or square RCC columns, vertical wall, sunshades, top and bottom slab of RCCSlab, etc.
3621
-
-
Centering for curved surfaces of all RCC items of work
420
-
-
MASONRY WORKS
-
-
-
Brickwork in following Cement Mortar using Fly Ash Bricks of 230 x 110 x 75mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load-bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifications.
-
-
-
a) Upto Basement
76
-
-
b) Ground Floor
298
-
-
c) First Floor
276
-
-
d) Second Floor
276
-
-
e) Terrace
33
-
-
Brick partition walls of 11.50cm thickness using best quality II Class Ground Moulded Chamber Burnt Bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including both side plastering and curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
a) Upto Basement
50
-
-
b) Ground Floor
685
-
-
c) First Floor
326
-
-
d) Second Floor
326
-
-
e) Terrace
122
-
-
PLASTERING WORKS
-
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
4822
-
-
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
9589
-
-
Plastering with Cement Mortar 1:4 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
4320
-
-
JOINERY WORKS -
-
-
-
Providing country wood Wrought and put up frame for door and window any other similar joinery works using following size of upto 4m in length Country wood scantling of pillai maruthu or patak including labour for wrought and putup in position etc., complete complying with standard specification..
-
-
-
a) All Floor
2
-
-
Supplying and fixing of FRP door Sutter with FRP door frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and solid core FRP shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers
-
-
-
a) All Floor
92
-
-
METAL WORKS
-
-
-
1 Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
-
-
-
a) All Floor - Staircases
250
-
-
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc ROLLING SHUTTERS (WITH ISI MONOGRAM) Manually Operated (up to 8 sqm. Area)
1273
-
-
GLASS WORK
-
-
-
UPVC Window
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
-
-
-
First & Second Floor
76
-
-
UPVC Ventilator
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
-
-
-
ALL Floor Toilets
11
-
-
Providing and fixing a Fixed glasses & doors 12mm toughened glass (Saint Gobain or anyother approved make) with standard accessories like locks, handles, hinges, screws, nails of approved make etc., complete to suit the overall sizes of openings as detailed in drawing at all levels and as directed by the Engineer-in-charge.
-
-
-
Admi room
47
-
-
FLOORING WORKS
-
-
-
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
2599
-
-
Flooring with following Designed anti skid ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
122
-
-
Dadooing walls with following best approved quality, Designed colour ceramic tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
684
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
162
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
1077
-
-
Providing and Laying Granular sub base (GSB) by provided coarse graded material confirming to ( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges etc.complete as per clause of 401 Morth Specification
254
-
-
Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5
339
-
-
Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) Including Cost of Bitumen emulsion At The Site Including Labour Charges For Preparing The Surface And Applying Required Quantity of Bitumen Emulsion As Prime Coat Using Bitumen Sprayer Etc. Complete Over Wet Mix Macadam As Per Clause 502 of Mort & H Specifications.
1692
-
-
Providing and laying Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting 1)including cost of bitumen emulsion at the site, including labour charges for preparing the surface and applying required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete over the primed surface as per clause 503 of MoRT& H SpecificationsRev.5.
1692
-
-
Providing and laying 75mm consolidated thick Dense Bituminous macadam using 0.40 cum for 37.50-13.20mm, 0.35 cum of 13.20- 2.36mm and 0.36 cum of 2.36mm & below size IRC metal with 71.30 kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 75mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 tonne CMP with bitumen boiler, tipper CUM 7463.60 7282.95 7073.55 trucks,9m paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 of MORTH rev-5.[The Rate Is Applicable Only If It Is Laid By 9M Paver Finisher].
126.9
-
-
Providing and laying Bituminous Concrete to 40 mm thick using 0.13 cum of 19.00- 9.50mm,0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5 (This Rate Is Applicable Only If The Work Is Carried Out During Night And If It Is Laid By 9M Paver Finisher).
1692
-
-
PAINTING WORKS
-
-
-
Painting two coats of newly plastered Ceiling & wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
19926
-
-
WATER PROOFING WORK
-
-
-
Supply and applying water proofing treatment on Retaining walls external surface at Basement, UG Sump, Water tank, Raft sides etc. using cement admixed with water proofing compound in the following order.
-
-
-
i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement
-
-
-
ii) Supply and Fixing of 50 long 18 mm dia GI nozzles in the hole of about half the depth of member size along construction joints, and honey comb areas at a spacing not more than 1m c/c.
-
-
-
iii) Supply and Applying injection grouting through the nozzles grouting pumps with a minimum pressure of 2 kg/sqcm with cement slurry admixed with CICO Non shrink Polymeric Water Proof Grouting Compound or approved equivalent at the rate of 2% by weight of cement.
-
-
-
iv) Sealing & cutting of nozzles and leveling the surface using integral Waterproofing compound CICO NO.3 or approved equivalent in the ratio 1:1by weight.
-
-
-
v)Supply and applying one coat of TAPECRETE Acrylic Polymer Modified Cementitious Slurry Coat over well prepared surface as a Primer and applying CICO CORCHEM 206 - I Polyurethane Based Elastomeric Coating to the thickness of 1.5 mm in 2 coats over TAPECRETE slurry coat applied surface.
-
-
-
vi) Lay protective plaster layer with 12mm thick Cement Mortar 1:4 (1 cement: 4 coarse sand) admixed with Normal setting integral Waterproofing compound CICO NO.1 or approved equivalent conforming to IS 2645 at the rate of 2% by weight of cement over the third coat of brush topping. Plaster shall be cured by spraying of water for the next 7days. The entire water proofing system shall be protected with a 25 mm thick extruded polystrene with necessary low VOC adhesieve.
-
-
-
Water proof & Grouting work For Retaining Wall, U.G.Sump & Over Head Tank And Terrace Floor
2848
-
-
Conveyance of Earth/Debris to a lead of within 30 km from site as directed by the Engineer inculding loading, unloading, hire charges for vehicle and other incidental charges etc., all complete as directed by the Departmental Officers.
17709
-
-
MEP WORKS
-
-
-
PLUMBING WORKS
-
-
-
Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs.
-
-
-
300mm
30
-
-
150mm
30
-
-
Reaming from 200mm dia pilot bore to 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level
60
-
-
Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992
-
-
-
200mm dia CS ( plain pipe
10
-
-
200mm dia RS
20
-
-
150mm dia RS
30
-
-
Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.
-
-
-
200mm dia CS
10
-
-
200mm dia RS
20
-
-
150mm dia RS
30
-
-
Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.
20
-
-
Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by Executive Engineer and conducting yield test by 'V' notch method.
8
-
-
Supply and erection of 2.Hp Submersible Pump set using nylon rope including cost of motor , fixing necessary cable charges and labour charges etc., complete
2
-
-
Supplying and fixing in position best quality of HDPE pipes with ISI mark of following dia with specials including cost and coveyance of HDPE pipes and specials, labour charges for erection of pipes in the borewell and jointing materials etc., all complete as directed by the departmental officers.
95
-
-
Supplying and fixing in position white / Glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings..... such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)
36
-
-
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
36
-
-
Supply and fixing in position of best Indian make white glazed earthernware Magnum urinal of best quality and approved make of size 380mm x400mm x590mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
33
-
-
Supplying and fixing in position 15mm dia brass Long body tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
165
-
-
Supplying and fixing Health faucit with new one of Two way bib cock tap with flexible hose 15mm dia (METRO) of approved quality and make including labour charges for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
36
-
-
Supplying and fixing in position Indian make Special type mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
18
-
-
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
36
-
-
INTERNAL DRAINAGE SOIL AND WASTE PIPE SYSTEM
-
-
-
Supplying and laying and jointing UPVC Pipe(Un-Plasticized Polyvinyl Chloride) UPVC used for commercial applications operate and designed to handle higher water pressure (schedule-80) but excluding cost of such specials and fixing in position dismantling masonry and make the same to original condition etc complete complying with standard specification and as directed by the departmental officers at site of work.
-
-
-
25mm dia
467
-
-
40 mm dia
517
-
-
65 mm dia
105
-
-
Supplying of following UPVC specials of approved qaulity and make including labour for fixing in position etc complete complying with standard specification and as directed by the departmental officers at site of work.
-
-
-
UPVC Elbow
-
-
-
Dia 25mm
125
-
-
Dia 40mm
18
-
-
UPVC TEE
-
-
-
Dia 25mm
102
-
-
Dia 40mm
29
-
-
UPVC BEND
-
-
-
Dia 25mm
85
-
-
Dia 40mm
12
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level
-
-
-
A) 75 mm dia
70
-
-
B) 110 mm dia
543
-
-
B) 160 mm dia
70
-
-
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
PVC Elbow
-
-
-
Dia 75 mm
36
-
-
Dia 110 mm
139
-
-
Dia 160 mm
30
-
-
PVC SHOE
-
-
-
Dia 110 mm
36
-
-
Dia 160 mm
35
-
-
PVC Tee
-
-
-
Dia 110 mm
70
-
-
Dia 160 mm
35
-
-
PVC Tee with Single Door
-
-
-
Dia 75 mm
36
-
-
Dia 110 mm
140
-
-
Dia 160 mm
15
-
-
PVC Bend
-
-
-
Dia 75 mm
36
-
-
Dia 110 mm
139
-
-
Dia 160 mm
30
-
-
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
-
-
-
a) 110 x 110 mm dia (20 mm water seal)
70
-
-
RAIN WATER SYSTEM:
-
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
-
-
-
160mm dia PVC Pipe
250
-
-
EXTERNAL DRAINAGE SYSTEM:
-
-
-
Supplying, laying, jointing, testing and commissioning approved make PVC 6kg pipes SWR grade confirming to IS 13592 Class "B" with rubber ring joints confirming to IS 5382 for solvent jointing for Suspended piping in ceiling Lvl. The quoted rate shall include necessary fittings like Tees, 45 or 90 deg. Bends, Couplers, Offsets, etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete. The quoted rate should include encasing the pipes in toilet sunken in M-15 grade concrete as per specifications 100mm thk. all around with necessary shuttering arrangement, as directed by Engineer-in-Charge.
-
-
-
a) 110 mm dia
32.5
-
-
b) 160 mm dia(soil pipe)
278
-
-
Construction of Inspection chamber of size 60x60x75cm with necessary earth work excavation, 40mm size brick jelly concretein C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called M-Sand) and 10 broken brick jelly)stock brick work in c.M.1:y (1 cement and 6 Crushed Stone Sand (Commercially called MSand)) for 23cmthick wall, benching, channelling and plastering, interior, exterior and top with c.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)) 12mm thick and providing 7.5cm thick RCC loose slab covering in CC 1:2:4 ( 1 Cement,2 Crushed Stone Sand (Commercially called M-Sand) and 4 blue granite broken stone jelly of 12mm to 20mm size) with necessary reinforcement and arrangements to lift for cleaning purpose,etc.,complete
10
-
-
INTERNAL WATER SUPPLY SYSTEM
-
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
Fixing Gun Metal Wheel Valve
-
-
-
Dia 40mm
6
-
-
Dia 65mm
6
-
-
ELECTRICAL WORKS
-
-
-
CT Metering Panel (as per the TANGEDCO norms) - Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, complete with electrolytic grade copper bus bars, internal wiring, colour coding, ferrules, Panel mounting MS Channels, fasteners, etc., RYB indication lamps, internal wirings, Digital voltmeter and Ammeter and other required accessories for the complete operation as per the Tangedco requirements. Necessary approval to be obtained from Tangedco before procurement including all associated control wiring. 1set of 400/5A CT with TNEB metering provision and 1 nos of 400A /5A CT for APFC.. For all items in this section, the rate includes necessary supports as required at site. No extra payment will be made for the same. Rate shall inclusive of factory witness test and all accessories, breakers , control wiring, models has to be followed as per in the technical specification.
1
-
-
Supply, installation, testing and commissioning of 105 KVAR Automatic power factor correction panel ( APFC ) with 12 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel, enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 12 stage Digital Automatic power factor correction, ( APFC ), Auto / Manual selector switch, cluster LED type indicators, in the incomer, complete with electrolytic grade aluminium bus bars. Incoming of 1 set of 400A MCCB, Copper Bus Bar. outgoing of.125A,3Pole MCCB with Suitable contactor with 25KVAR Heavy duty capacitor - 3Nos, 63A, 3Pole MCCB with Suitable contactor with 10KVAR Heavy duty capacitor - 2Nos, 32A, 3Pole MCB with Suitable contactor with 5KVAR Heavy duty capacitor - 2Nos. Start, Stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting, Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, MV panel sensing CT interconnecting wiring etc., complete.
1
-
-
Supply, Erection, Testing and Commissioning of 125KVA Diesel Generator set with AMF control panel, comprising of Water cooled CPCB developing @ 1500 RPM and Alternator, complete with type approved canopy and all accessories. with the following technical specification:
*Industries most reliable engines, proven over decades.
*Low emission, High efficiency.
*Compact, robust and rugged design.
*Engine Dry type air cleaner
*Exhaust Silencer (Residential type) Hospital Grade.
*Expansion bellow
*Lube oil cooler Lube oil filter (“Spin-on” type)
*Fuel Filter (“Spin-on” type)
*In line mono block fuel injection pump with Electronic Governor and fuel feed pump.
*Dynamically balanced Flywheel with starter ring
*Electronic Governor : Governing class G2 (as per ISO 8528 part V) *SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.
-
-
-
*Exhaust gas turbocharger 24 Volt electric starter motor 24 Volt, 18 amps. Battery charging alternator
*Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button.
ALTERNATOR
125KVA, Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 125 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank: 300 Letters Capacity inbuilt Fuel Consumption: 100% = 37.6 Litres/hr.75% = 27.6Litres / hr.50% = 19.8Litrs/hr.
Battery: 24V DC, 130AH Supply of AMF Control Panel Suitable for 125 KVA DG set for EB Services with byepass arrangement. (Make: Kirlosker, Koel or equvalent)
1
-
-
Supply, Erection, Testing and Commissioning of 62.5KVA Diesel Generator set with AMF control panel, comprising of Water cooled CPCB developing @ 1500 RPM and Alternator, complete with type approved canopy and all accessories. with the following technical specification:
*Industries most reliable engines, proven over decades.
*Low emission, High efficiency.
*Compact, robust and rugged design.
*Engine Dry type air cleaner
*Exhaust Silencer (Residential type) Hospital Grade.
*Expansion bellow
*Lube oil cooler Lube oil filter (“Spin-on” type)
*Fuel Filter (“Spin-on” type)
*In line mono block fuel injection pump with Electronic Governor and fuel feed pump.
*Dynamically balanced Flywheel with starter ring
*Electronic Governor : Governing class G2 (as per ISO 8528 part V) *SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.
-
-
-
*Exhaust gas turbocharger 24 Volt electric starter motor 24 Volt, 18 amps. Battery charging alternator
*Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button.
ALTERNATOR
62.5 KVA, Three phase 415V, 0.8 pf 4 wires 50 Hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 62.5 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank: 170 Letters Capacity inbuilt Fuel Consumption: 75% Load = 11.3 Litres.
Battery: 24V DC, 130AH Supply of AMF Control Panel Suitable for 62.5 KVA DG set for EB Services with byepass arrangement. (Make: Kirlosker, Koel or equvalent)
1
-
-
Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated MCCB Indoor Panel Board, made up of 2mm powder coated, including bus bar provision of double door with industrial lock with Multifunction Meter 1no and 1no 400A Four Pole Change Over Switch, Main 1no EB source Incoming 400A 4Pole MCCB and Main 1no DG source Incoming of 250A 4Pole MCCB's, 2nos of 160A Four Pole MCCB, 3nos of 125A 4Pole MCCB's, 22nos of 100A 4Pole MCCB's and 2nos of 63A 4Pole MCCB's for O/G with suitable copper bus bar (33x6mm) having three phase Multifunction meter with line indicators for erecting the indoor panel board complete etc., The above panel board is to be erected on Anchor fastners, bolts and nuts for mounting the Indoor Panel etc. complete. ( For Lighting & Power Loads )
1
-
-
Fabrication, Supply, Erection, Testing and Commissioning of whether proof CRCA sheet steel powder coated Indoor panel board, made up of 2 mm powder coated, including bus bar provision of double door with industrial lock with main 125A,TPN MCCB I/C and 6nos 32A TP MCB & 2Nos 63A TPN MCB for O/G with suitable copper bus bar (25x3mm) having three phase Digital volt and ammeter with line indicators for erecting the Indoor panel board suitable for mounting on wall surface with internal wiring and earth connections. The above panel board is to be erected with anchor fastner, bolt and nut or suitable angle etc., (For Ventilation system)
1
-
-
LIFT
-
-
-
Supplying, erecting, testing and commissioning of machine room less passenger Elevator having 8 passengers capacity, rated speed 1.0 mtr. / sec., for GF & 1st floor, 400 volt 3 phase, 50 Hz, AC variable voltage variable frequency derive with speed encoding, simplex full collective with / with out attendant, microprocessor based controller located top floor, variable frequency regenerative drive, flat polyurethane coated belts for traction media, stainless steel panels with hairline finish for car and door, gearless with permanent magnet motor located in the shaft top, all openings are located at the front of the hoist way, with centre opening Automatic with ACVVVF door operator with electronic door protective system, stainless steel hairline finish sliding doors, painted frame with down light false ceiling, Stainless Steel mirror finish hand rails, granite flooring of client choice, sixteen segment digital LED display position indicator in all floors, digital car position indicator, over load warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby, with automatic rescue device, intercom between lift car and lobby and controller, voice synthesizer, 60 minutes fire rated car door. Car Entrance :- Clear opening (M-2087)
4
-
-
Supply and fixing of 8 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.63A 4P MCCB switch as incoming and 8 nos.32A 3P MCB , as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End
6
-
-
Supply and fixing of 7 segment 12 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 12 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB)
11
-
-
Supply and fixing of 7 segment 12 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 12 ways in one segment) (3 x 12 ways in each segment) and seperate provision for MCB / Isolators ( totally 36 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (Without ELCB)
8
-
-
Outdoor lighting Sub panel / DB
-
-
-
Supply, Erection, Testing and Commissioning of the following Type outdoor lighting distribution panel with individual segegration chamber with MCCBs / MCBs /ELCBs, / RCCBs , Phase segegration Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application IP65 as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the Corporation/ Highway department requirement.
Incomer 40 A TPN MCCB with Timer control On/OFF
Outgoing : 20 A DP RCCB -30mA - 18 Nos
2
-
-
Supply and fixing of 8way Single pole and neutral MCB sheet steel enclosure with IP 42 protection distribution board double door with 1no. 32A DP MCB as incoming and 6Nos of 10A SP MCB for Outgoing on wall with earth connection only The MCB DB and MCB's should be with ISI mark. ( Like Standard make )
118
-
-
Lift Shaft Wiring : Wiring, Connecting, Testing & Commissioning for lift well light point and 6Amps power socket outlet with 2 x 2.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 2.5 sqmm FRLS PVC insulated standed copper conductor cable as earth wire in MS conduit including providing and fixing switch box, 2 Nos. of 5A single way module switch (for controlling light point and socket Outlet ) for each floor of the lift well , with bulkhead lamp 1 No. 5A 5 Pin shuttered socket outlet with flush type switch for each floor of the lift well and making necessary connections complete etc.
52
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Primary Point )
425
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe with 2 mm thick, ISI marked concealed in wall and ceiling with PVC accessories with Module GI Switch Box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection by 2.5sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light / Fan Point (for electronic) (Secondary Point )
1125
-
-
Wiring, with 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mounting Switch Box in flush with wall with 6A one way module switch with module front plate with painting of suitable colour for Open PVC Light / Fan Point (for electronic) (Basement Point )
52
-
-
Supply and laying of 3 1/2C x 120 Sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
50
-
-
Supply and Clamping of 31/2C x 120 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
90
-
-
Supply and Clamping of 31/2C x 70 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
130
-
-
Supply and Clamping of 31/2C x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
210
-
-
Supply and Clamping of 31/2C x 25 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
160
-
-
Supplying and laying 3 1/2C x 25 Sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
150
-
-
Supply and Clamping of 2C x 10 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
4990
-
-
Supply and fixing of brass cable gland for 31/2C x 120 Sq.mm PVC LTUG armoured cable with earth connection
7
-
-
Supply and fixing of brass cable gland for 31/2C x 70 sq.mm. PVC armoured LTUG cable with earth connection
6
-
-
Supply and fixing of brass cable gland for 31/2C x 35 Sq.mm PVC LTUG armoured cable with earth connection
12
-
-
Supply and fixing of brass cable gland for 31/2C x 25 Sq.mm PVC LTUG armoured cable with earth connection
12
-
-
Supply and fixing of brass cable gland for 2C x 10 Sq.mm PVC LTUG armoured cable with earth connection
254
-
-
Supply and providing cable end termination of 31/2C x 120sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
7
-
-
Supply and providing cable end termination of 31/2C x 70sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
6
-
-
Supply and providing cable end termination of 31/2C x 35sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
12
-
-
Supply and providing cable end termination of 31/2C x 25sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
12
-
-
Supply and run of 2 of 2.5 sqmm (36/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.
2120
-
-
Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed wall and ceiling with continuous earth wire connection 1 of 2.5 sqmm (36 /0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade and making good of the concealed portion with suitable colour.
1200
-
-
Supply and run of 50mm Dia HDPE pipe of 4kgf/cm2 approved quality and best variety conforming to ISS and ISI mark below ground in HDPE pipes
400
-
-
Supply and fixing of 1 no.6A two module 5Pin socket , 1 no. 6A one module switch with modular cover Plate (Plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Higher End
204
-
-
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with modular cover Plate (Plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
130
-
-
Supply and fixing of 24W, 4000K 2 x 2 Square type recessed fitting with LED Down light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.
207
-
-
Supply and fixing of 18W LED 3000 K Square type recessed light on wall or ceiling with PVC unsheathed copper leads from terminals to the fitting and to complete necessary accessories and etc to complete the work.
991
-
-
Supply and fixing of 10W Bulk Head LED Fitting with Surface mounted LED luminarie Superior finish etc., complete. The rate inclusive of all taxes and transportation charges etc., complete ( Cat. Ref. Philips Make; WT202W LED10S).
52
-
-
Supply and fixing of 6Mtr height Chatsworth pole with Single arm 50W LED Street light luminaire (IP66), The Pole made of mild steel/steel tube complied with IS1161/IS 3601, minimum thickness of 3mm. The Pole shall have two sections, lower section having dia of 140mm & 1000mm length, upper section having dia of 76mm with 3000mm length with decorative casted iron parts. Pole shall be mounted on square base plate 250*250 *12 mm thickness. The Pole Shaft should be fabricated out of Steel tube of grade YST 240. Structurally designed base plate
of Steel A36/A572-50 or equivalent should be welded with the pole shaft. The complete structure shall be hot dip galvanized through 7 stage process and single dip process as per ASTM A123 and minimum average coating shall not be less than 65 microns before treating with primer. After galvanisation structure shall be treated with two coats of high-quality primer and thereafter coated with Polyurethane paint( Marine grade paint) to minimum average DFT of 70 microns. The Pole shall of construction designed to withstand basic wind speed of 169kmph. The complete structure should be hot dip galvanised and marine grade treated, Foundation bolts included. ( CAT REF:- KESSLEC HDGI 4M CLASSIC POLE PU ) Painted with base plate. (Electrical accessories like wires,switches and MCB are not in kesslec scope)
18
-
-
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic 300W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")
210
-
-
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall
131
-
-
Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI Pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
8
-
-
Earthing as per PWD standard with an earth electrode of 2meter Class 'B' GI pipe of dia not less than 32mm complete with necessary masonary work
116
-
-
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work
60
-
-
Supply and run of 25mm x 6.25mm Aluminium flat with necessary clamps / supports on wall / floor / ground for earth connection and etc to complete the work.
600
-
-
Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8SWG GI wire at the equal interval of 1.5 meter and etc to complete the work.
500
-
-
Coil Earth to Street light poles with No 8 SWG GI wire of 11.5 Mtrs of length in which 10 mtrs of total length compressed in to a coil of one meter length (75 mm to 100 mm dia) connected suitable with Hexagonel earth bolt of size 8mm to 25 mm welded on the pole at one end with a coil position fixed on the earth and etc to complete the work.
18
-
-
Supply and fixing of 20A, AC Single Phase, 230V, 50Hz. Watt hour meter fixing to meter board with metal box with necessary bolts and nuts supports and supply and fixing of 1no 32A DP MCB 1 No Neutral link, Earth link with inter connection of meter to MCB by 7/20 PVC insulated copper wire with earth connection complete.
102
-
-
The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements.
The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc,(8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )
-
-
-
Perforated type
-
-
-
Supply and Laying of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm width and 50mm height
830
-
-
Supplying and fabricating of MS structural steel supports of size 450mm x 150mm for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.
438
-
-
VENTILATION SYSTEM
-
-
-
Supply, Installation, Testing and Commisioning of Galvanized Sheet Steel Made Jet fans with protection guard with the following specifications
1) 250mm impeller dia jet fans 2) Motor : 0.29 / 1.27 Kw @ 4/2Pole. IP55, Class F insulation 3) Dual speed motor suitable for 300Deg C for 2 hours. 4) 4700 / 9000 CFM. output. 5) Special silencers at the inlet and outlet 6) Mounting brackets for ceiling suspensions 7) Sound level 40/60 dB
3
-
-
Supply, Installation, Testing and Commisioning of Galvanized Sheet Steel Made Fresh Air fans complete with the following specifications.
1) Impeller madeup of die cast alluminium alloy with Hub and blades matching with aerodynamic profile 2) Direction of discharge and rotating position as per requirement
3) Speed: 1550 RPM 4) CFM: 14,000 @ 15mm wg static pressure.
5) KW: 3.7Kw
6) Sound level: 80dB
3
-
-
Supply, Installation, Testing and Commisioning of Galvanized Sheet Steel Made Exhaust fans complete with the following specifications.
1) Impeller madeup of die cast alluminium alloy with Hub and blades matching with aerodynamic profile 2) Direction of discharge and rotating position as per requirement
3) Speed: 1550 RPM 4) CFM: 28,000 @ 30mm wg static pressure.
5) KW: 7.5Kw
6) Sound level: 80dB
1
-
-
Supply, Installation of 20 Gauge GI Duct Sheet of size 600mm x 300mm along with necessary M.S. angle supports, flanges, channels, bolts & nuts etc., complete. The rate is inclusive of transportation charges etc., complete.
375
-
-
CCTV
-
-
-
Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR 3nos with 8TB Hard Disk Drive, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output HDMI1 / VGA1 outputs provided HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency,Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).
1
-
-
Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:
●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)
● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied
●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,
● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W
● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)
50
-
-
Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR
h) True colour generator
i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote
p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).
2
-
-
Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories.
50
-
-
Supply and Laying of CAT 6 armoured cable in 50mm HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)
IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T
IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.
1750
-
-
Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.
100
-
-
Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.
3
-
-
Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with LNS unit and fan extra for the above rack.
1
-
-
Supply and Instalatin for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up
1
-
-
Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.
7
-
-
PA System
-
-
-
Supply, Installation,Testing & commisioning of 30 watts 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:Ahuja AMH402T/Bosch or its equivalent)
14
-
-
Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent)
1
-
-
Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent)
1
-
-
Supply and run of 2core 1.5 Sqmm Un armoured speaker cable with 25mm PVC pipes concealed wall and ceiling etc. complete. .
450
-
-
Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.
1
-
-
FIRE FIGHTING WORKS
-
-
-
Supply, installation, testing and commissioning of Diesel Engine Driven Main Fire Pump suitable for automatic operation and consisting of followings complete in all respects as required.
a. 1 No. horizontal split casing centrifugal type fire pump capable of delivering 1620 LPM against a total head of 40 meters, so as to ensure a minimum pressure of 3.5 kg. per
sq.cm at the farthest top most hydrant / outlet with pump casing of cast iron to grade FG 200, IS 210-1978 and parts like impeller, shaft sleeve, bearing ring, etc., of non-corrosive metal either like bronze, brass or gun metal and shaft ofstainless steel.
b. 36 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete.
c. Auto starting mechanism, 12 volts / 24 volts electric starting equipment like self motor, dynamo, solenoidswitches etc.
d. 110 litres capacity diesel tank mounted over stand fabricated using 25mm x 25mm x 6mm size MS angle providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc............ e. Exhaust system having flexible metallic mufler, 100mm dia MS heavy pipe extended upto 1m outside pump house duly insulated with 50mm thick glass wool with 1mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from wall or ceiling as per site condition.
f. Dash board consisting of the instruments like Temperature Gauge, Galvano Type DC Ammeter, Lubricant Oil Pressure Gauge, Ignition Switch, Emergency Stop and all other protection equipments as per specification, stop soleneid for auto stop in the event of fault with audio indications, painted with Post Office Red Colour etc., as required.
g. 12 V / 24 V, storage battery, maintenance free tape, 180AH rating. MS fabricated common base plate, coupling guard, foundation bolts, etc., as required.
h. Positioning the Diesel Engine Driven Fire Pump over cement concrete foundation using suitable size anti vibration mounting arrangements.
All works including conveying, fixing and incidental charges, etc., completed as per standard specification and as directed by the Departmental Officers. (Make: KIRLOSKAR / EQUIVALENT).
1
-
-
Supply, erection, testing and commissioning of Fire Fighting Application Horizontal Centrifugal Type Pump rated for 1620 LPM at 40 metres head with Electrical Motor of 35HP of 415 volt, 3 phase connection complete with base plate and accessories. (Make Kirloskar or Equivalent). The rate inclusive of neessary vibration, bed mounting, etc., as per standard specifications and as directed by the Departmental Officers.
1
-
-
Supply and providing 1000 litres capacity Priming Tank madeup of PVC. Make: SINTEX / EQUIVALENT
1
-
-
Priming Tank mounted with the supporting arrangement fabricated using MS angle for the height of 3 metres from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room, as directed by the Departmental Officers.
1
-
-
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers &
joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT
-
-
-
150mm dia
50
-
-
100mm dia
220
-
-
80mm dia
380
-
-
25mm dia
20
-
-
Wrapping and coating anti-corrosive treatment for the
following under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape
wound over the MS Pipe as per standard methods as
per standard specifications and as directed by the
Departmental Officers.
-
-
-
150mm dia
50
-
-
Providing, fixing pipe supports from columns / wall or
suspenders from roof slab to suit various dia of pipes
made out of GI / MS adjustable rods threaded for a
sufficient length to adjust the height of support along
with clamping arrangement for holding pipes of anchor
fastening, arrangement design of hanger and should
confirm with specification.
-
-
-
100mm dia
733
-
-
80mm dia
1266
-
-
Supply, erection, testing and commissioning of
following sizes of Heavy Duty Foot Valve including all
accesories, such as, MS flange of table ‘E’, gaskets,
bolts & nuts, etc., installed at end of 150 / 200mm dia
suction pipe line at sump including conveyance, all
incidental charges, neccessary scaffolding and re-doing
the dismantled portions to its original condition
wherever found neccessary, etc., complete and as per
standard specification and as directed by the
Departmental Officers. Make: NORMEX / KARTAR /
EQUIVALENT
-
-
-
150mm dia
3
-
-
Supply, erection, testing and commissioning of cast
iron body and bronze internal non-rising spindle sluice
valve of sizes at required places to control the flow of
water including necessary MS flange of table ‘E’,
gaskets, bolts & nuts including conveyance, all
incidental charges, neccessary scaffolding and re-doing
the dismantled portions to its original condition
wherever found neccessary, etc., complete as per
standard specification and as directed by the
Departmental Officers. Make: NORMEX / KARTAR /
EQUIVALENT
-
-
-
150mm dia
3
-
-
Supply, erection, testing and commissioning of Pressure Gauge with 0 to 14 kg. range of reputed make with necessary valve, milling thread MS coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: HGURU / ISI MAKE / EQUIVALENT.
9
-
-
Supplying, installation, testing and commissioning of Fire Fighting Electrical Control Panel of cubical construction, floor mounted type fabricated using CRCA sheet, compartmentalized with hinged lockable door dust and vermin proof, cable alley, inter connection having switch
gears and accessories mounting and internal wiring, earth terminals, numberings, necessary metering protections and indications complete in all respect suitable for operation on 415volt, 3 phase, 50 Hz AC supply with enclosure protection class IP 54 and mounted with the followings.
A. Common Panel in Fire Pump House
(i). Incomer
a. 1 No.125A TP & N SDFU with HRC fuses
b. 1 set of125A, 4 bar aluminium bus bar, 415 V, 50 HZ AC supply
c. 1 No. (0-500A) digital ammeter with selector switch & CTs
d. 1 No. (0-500V) digital voltmeter with selector switch and control fuses
e. 3 Nos. phase indication lamp LED type with toggle switches with control fuses
(ii). Outgoing
a. Main Fire Pump
125 A TPN SDFU with HRC fuses with sutable HP fully automatic starter / delta starter with over load protection, digital ammeter with built-in selector switch and suitable CTs, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic
operation, selector switch for auto / manual / OFF operation - 1 No. Each 612100.00
b. Jockey Pump
125 A TPN SDFU with HRC fuses with suitable HP fully automatic starter / delta starter with over load protection, current sensing type single phasing preventer complete with all accessories and internal wiring required for automatic operation, selector switch for auto / manual operation - 1 No.
c. Diesel Engine Control comprising of:
1. Auto / manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode.
2. Indication lamp for high / low lubricant oil pressure, high water temperature and engine ON indication.
3. Battery charger suitable for 12V /24V DC with boost and tickle selector switch, 0-15V / 0-30V DC volt meter, 0-20A DC ammeter.
4. All standard relays and accessories for automatic operation of diesel engine.
5. The above combined panel mounted over MS channel fabricated frame with cement concrete platform, all other connection works carried out as per standard methods and including conveying, fixing and incidental charges, etc., complete as per standard specification and as directed by the Departmental Officers.
1
-
-
Earthing arrangements with GI Earth Plate including
charcoal and salt with necessary excavation in all soils
and to full depth as may be required and masonry
work, re-filling the sides of foundation with excavated
earth as per the standard specification and as directed
by the Departmental Officers.
2
-
-
Supply and fixing in position of Fire Fighting Duct
Window having proper glass window type double door
with universe open key, painted inside white and
outsid post office red for the sizes of 1300 x 900 x
500mm (L x B x D) fabricated using 25 x 3mm MS 'L'
Angle and all sides covered with 2mm thick MS sheets,
suitable arrangements to kept 2 Nos. of Fire Fighting
Hoses and 1 No. Branch Pipe, mounted in fire duct
using anchor fasteners, etc., as per standard
specifications and as per directed by the Departmental
Officers
10
-
-
Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, shellac etc., as per standard methods and including conveyance, all incidental charges, neccessary scaffolding and re doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standardspecification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFEGUARD / EQUIVALENT.
99
-
-
Supply and fixing of Water CO2 Stored Pressure Type 9
litres capacity Fire Extinguisher as per new IS 15683
complete with control valve, gun metal cap, pressure
gauge, operation sticker, discharge hose, wall
mounting bracket, safety clip, etc., as directed by the
Departmental Officers.
60
-
-
Supply and fixing of stored pressure ABC (Mono
Ammonium Phospate) Powder Type Fire Extinguisher of
6 kg. capacity as per IS:15683 with pressure gauge,
discharge hose & control nozzle, wall mounting
bracket, safety clip etc., including conveyance, all
incidental charges, neccessary scaffolding and re-doing
the dismantled portions to its original condition
wherever found neccessary etc, complete as per
standard specification and as directed by the
Departmental Officers. Make: EXCELLENT / SAFETY
FIRST / EQUIVALENT
60
-
-
Supply, installation, testing and commissioning of
Electronic Hooter / Sounder providing on wall using
fixing accessories like screws, plug, clamps and etc., as
per standard methods and as directed by the
Departmental Officers (Make: Ravel / Equivalent)
12
-
-
Supply, installation, testing and commissioning of
Manual Call Point (MCP) providing on wall using fixing
accessories like screws, plug, clamps and etc., as per
standard methods and as directed by the Departmental
Officers. (Make: Ravel / Equivalent)
10
-
-
Supply, installation, testing and commissioning of, Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)
15
-
-
Supply, installation, testing and commissioning of Micro Processor based conventional 8 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers
4
-
-
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.
532
-
-
MISCELLANEOUS WORKS
-
-
-
Providing the best range of public waiting chair , fort multi seater (powder coated), 3 seater stainless steel , stainless steel two seater waiting chair and stainless steel 1 seater waiting chair. Size: 1750 x 740 x 910 mm. & 1250 x 690 x 800 mm.
-
-
-
a) Three Seater
25
-
-
b) Two Seater
24
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements