Chennai Metropolitan Development Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Chennai Metropolitan Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date27 Sep 2023
Closing Date11 Oct 2023
Tender AmountRefer Documents
Costs
EMD
₹ 4,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CMDAC_373612_1Bid Award Id
ViewTender No
04 (39)/2023-24Tender Authority
Chennai Metropolitan Development Authority ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling brick work manually by serviceable material and disposal of unservice material within 50 meters lead as per direction of Engineer in charge.
460
-
-
Removal of Doors and Windows including removal of frames, hinges and fastenings etc Complete
200
-
-
Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m and clearing and leveling the site etc. complete complying with standard specification.
2830
-
-
Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m- 3m and clearing and leveling the site etc. complete complying with standard specification.
125
-
-
Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 3m- 4m and clearing and leveling the site etc. complete complying with standard specification.
20
-
-
Supplying and filling Gravel by Lorry in basement filling including conveyance loading and unloading consolidationg with larger of 300 mm thk charges and all other incidential charges laying watering labour and consolidation etc., complete as directed by Dept., Officer with standard specification.
280
-
-
Filling with filling M - sand in foundation and below pavement for 100mm depth and well watered, rammed and consolidated by power compacter.The rate includes the cost of M sand and labour charges leveling, loading & Unloading and Transportation etc., complete and as per the standard specification.
200
-
-
Filling with filling River sand in foundation and below pavement for 50 mm depth and well watered, rammed and consolidated by power compacter.The rate includes the cost of River sand and labour charges leveling, loading & Unloading and Transportation etc., complete and as per the standard specification.
170
-
-
Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.
Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth.
Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.
Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12" to a depth of 8" around the building before laying the plinth projection. This holes has to be be closed after the treatment.
1220
-
-
Providing and laying plain cement concrete 1 : 4 : 8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc.
199
-
-
Providing formwork for centering shuttering etc. for all RCC works including strutting for height upto 3.29m using mild steel sheets of size 9 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., Rate to include all materials, labour charges, wastages , placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Client / Engineer-in-charge.
-
-
-
For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
4331
-
-
For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.
1040
-
-
For plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.
1680
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.
440
-
-
Supplying, fabricating and fixing in position of steel Fe 500 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
126
-
-
Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items.
Rate to include all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-
in-charge
-
-
-
For Basement
310
-
-
For Ground Floor
310
-
-
For First Floor
281
-
-
For Terrace Floor
80
-
-
Brick work in following Cement Mortar using best quality of Second Class Table Moulded Chamber Burnt Bricks 9" x 4-1/2" x 3" for cement mortar 1:5 (1 of Cement : 5 of manufactured sand using minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Country brick manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
-
-
-
For Basement
84
-
-
For Ground Floor
247
-
-
For First Floor
250
-
-
For Terrace Floor
100
-
-
Brick partition walls of 11.50cm thickness using best quality II Class Ground Chamber Burnt Bricks of size9" x 41/2" x 3" in Cement Mortar 1:3 (One Cement and Three Sand), Including both side all plastering with CM 1:5 12 mm thk and using hop iron ith reinforcement if found necessary. The lop iron shall be should be supplied by department at free of cost,including curing etc. complete and as directed by the departmental officers. -TNBP. No.31-C
-
-
-
For Ground Floor
160
-
-
For First Floor
71
-
-
Special ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshades, canopies, staircase, steps, landing slabs etc., with CM 1:3 according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
2351
-
-
Plastering the internal wall surface in cement mortar 1:5 (one cement:five sand) 12mm thick in all floor levels including curing complying with standard specification Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
4881
-
-
Plastering 20 mm thick for external surfaces in cement mortar 1:5 (one cement: five P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed.
Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
3191
-
-
Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.
Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Internal surface)
6500
-
-
Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
3190
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)
301
-
-
Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
360
-
-
Providing Antiskid Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
210
-
-
Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
863.1
-
-
Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of 18 mm thick (As per selection) including cutting for wash basin and edge polishing to be set in CM 1:3 (1 of cement : 3 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
40
-
-
Flooring with new CC laminated tiles (like Dora tiles, eurocon tiles etc., anti skid) of 20mm thick approved special quality and set in CM 1:3 (One cement and three sand) 20mm thick using river sand and pointing with colour cement at the rate of 0.40kg/m2 and mixing with colour pigment at the rate of 0.30kg/m2 including finishing etc., complete complying with standard specification and as directed by the Departmental officers. The colour & quality of tiles should be got approved by the executive engineer before use on work. and as directed by the Client / Engineer-in-charge.
160
-
-
Supplying and fixing Polished Rajasthan Kota stones 20mm thick of size 60cm x60cm (Mechine edge finishing fully polished)over the existing base course including fixing the slab in cm 1:3, etc complete. ( one part of cement and three parts of crushed stone sand) (The crushed stone sand to be used in base mortar shall conform to gradation as per IS 1542-1977)
1640
-
-
FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work
Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work
-
-
-
Door Size 1300 x 2400
170
-
-
Door Size 1000 x 2400
50
-
-
Door Size 900 x 2400
90
-
-
UPVC Window
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with E spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
205
-
-
UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
20
-
-
Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Client / Engineer-in-charge.
7580
-
-
Weathering course-using broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope. Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
180
-
-
Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc ., Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
1180
-
-
Providing and laying Brick jelly Lime concrete 1 : 2 : 5 in Toilet sunken areas, including Leading, Lifting, mixing, laying finishing etc, and laid in layers not more than 15 cm thick and compaction etc, Complete.,
10
-
-
Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush. Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier.
The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental
officers etc. The rate inclusive of cost of materials and
labour, etc., complete.
150
-
-
PROTECTIVE PLASTERING
Providing protective over the water proofing treatment provided over base concrete,RCC retaining wall, sunken slab and terrace in CM 1:4 to a minimum thickness of 12mm with suitable admixture.
150
-
-
Supplying and fixing fully polished cuddapah slab 50mm thick over the existing RCC slab / Masonry Walls using CM 1:3 (1 cement and 3 Crushed Stone Sand (Commercially called M-Sand)) and pointing with same morter, Including labour for fixing in position etc, complete complying with standard specification and as directed by the departmental officer TNBP
150
-
-
Supplying and fixing of Manhole Cover SFRC (900 mm x 900 mm) with Frame and labour charges , etc complete.,
4
-
-
Providing and laying of Rubber Moulded Hydraulic Pressed Paver Block -63mm thickwith C.M 1:3 pointing over Sand filling bed compacting, sand brushing and cutting, levelling, transporting etc., complete with the natural grey colour blocks, as directed by the Departmental Officers.
240
-
-
Supplying and Fixing of English Stainless Steel Letters of approved size and finish. Including Leading, Lifting, Scaffolding, Fixing and fixing etc complete., 25cm (10”) Ht
29
-
-
Supplying and Fixing of Government Logo of approved size and finish. Including Leading, Lifting, Scaffolding, Fixing and fixing etc complete.,
1
-
-
Supply and erection of Flag Post Using MS Hollow Round section of size 100 mm and thickness 3.6 mm, Including Excavation, Concreting, fixing, and apply Two coat of Enamel Paint with base coat of Primer, etc complete as per design and Details.Ht 6.5 Mtr
1
-
-
Supplying,Fixing and testing of RO unit with dispenser (80 Ltr per hr) with the folloing specification. 3 Tap Normal Water, Commercial range, Stainless steel 304 storage tank and body, Floor standing type with four leg, automatic filling type.
4
-
-
First Aid Box Complete with all First aid Medicines
1
-
-
Construction of Rain water Recharge well (1200mm dia) as per consultant drawing with necessary connections, (Quotation rate) Earth work-digging the well for recharge well supply and installation of Reinforced concrete Rings -4 feet OD & 1 feet Height 75 MM Thick - 10 no's supply and installation of einforced concrete slab 4 feet in dia. 200 mm thick, and 25 mm perforated 8 mm mild steel rods used for reinforcement-1" Perforated - 1no's supply and installation of Reinforced concrete closing slab 75 mm thick, 8 mm mild steel rods used for reinforcement with 600mm x 600mm Square HEAVY DUTY PERFORATED manhole cover Filtration Media Installation For recharge Well Unit 40 mm crushed stones-0.5cum, 20 mm crushed stones- 0.5cum, Brick Bats-0.5cum,fine sand 0.5 cub mtr Mixture of Brick Bats Shifting of excavated earth to the approved/authorised dumping yard as directed by the authorities/Site in charge. Drilling a bore well-200mm dia by high speed compressor-4MTRS, supply and installation of 110mm PVC PIPE PN-6-4 rmtr, 110mm PVC PIPE PN-6 Perforated with 10 mm Zigzag holes to easy percolate the water-4 mtr, 12mm Gravel Packing between bore well hole and PVC pipe and Inserting into the Bore Well- 4 mtrs. supply and installation of 180GSM Gio-fabric sheet to cover V-Wire screen, supply and installation of V WIRE SCREEN- 0.75 mm Slots. SS-304 Material -0.5 mtrs Height 6" diameter Shifting of excavated earth upto 1000mtrs as directed by site in charge (the well sholud be got approved by the concern department Engineer before use on works)
3
-
-
Student desk and Bench in metal: W1800*D450*H600 The table of the designed approve. Made out of Ms steel powder coated with top made out of MS sheet 1.2mm thick verticles made out of square tube 1.2mm thick and book shelf having inside divider per the design enclosed. All parts in MS with Powder coated. 1st std to 2nd std
48
-
-
Student desk and Bench in metal: W1800*D450*H650 The table of the designed approve. Made out of Ms steel powder coated with top made out of MS sheet 1.2mm thick verticles made out of square tube 1.2mm thick and book shelf having inside divider per the design enclosed. All parts in MS with Powder coated. For 3rd to 5th Std
72
-
-
Student desk and Bench in metal: W1800*D450*H700 The table of the designed approve. Made out of Ms steel powder coated with top made out of MS sheet 1.2mm thick verticles made out of square tube 1.2mm thick and book shelf having inside divider per the design enclosed. All parts in MS with Powder coated. For 6th to 10th Std
120
-
-
Pre KG Class Room Table seating for 4 person.
5
-
-
Pre KG Class Room chair for children .
20
-
-
For LKG and UKG Table. Made out of Ms with powder coated and top made out of 25mm PLPB MDF with edge binded.
11
-
-
For LKG and UKG Chair. Painted with frames in metal and seat and back are made in MDF painted.Underneath will have a nylon bush.
44
-
-
Teachers table:900w*600d*750h Top made out of Plywood with 2mm edge binding and bottom frames are made out of 25mm sq tube wiith powder coated 1.2 mm thickness and underneath will have nylon bush.
27
-
-
Metal Cupboard: 900w*450d*1800h. Steel cupboard made out of MS1mm thick and 0.8mm thick for the shelf and outer shell with powder coated and will have a three way locking with keys.
16
-
-
Principal room table with side credenza: Table Made out of 18mm ply with laminate and side table will be made out of 18mm ply with laminate and with 3 drawer pedestral with laock and key.
2
-
-
For labs underneath frame in commercial ply with laminate and 2mm edge binding with door.
112
-
-
Staff Room table with 3 drawes. 1200w * 600d *750h
15
-
-
Teachers chair staff room: Made out of MS frame 16g frae with powder coated and seat and back with plastic shell.
60
-
-
Principal room chair with seat and back made out of metal frame with powder coated with foam. Chair will have a gas lift with plastic base with nylon wheels.
2
-
-
Supply of Principal room chair visitor
10
-
-
Supply of Dust Bin
30
-
-
Library Rack
5
-
-
Chair Made out of MS frame 16g frae with powder coated and seat and back with plastic shell.
20
-
-
Computer table with keypad pull out :900w*600d*750h Top made out of Plywood with 2mm edge binding and bottom frames are made out of 25mm sq tube wiith powder coated 1.2 mm thickness and underneath will have nylon bush.
8
-
-
Black board using black oxide mixed with Cement Mortar 1:1:2 (1 black oxide,1 cement and 2 Crushed Stone Sand (Commercially called M-Sand)) over the rough plastered surface and black board surface has to be painted in two coats with black oxide,glass
powder and cement in ratio of 1:1:1 and finishing smoothly, etc., complete
80
-
-
Supply and Erection of Epson EHTW-750 Projector, RNT Projection Screen Motorised 100 Inches - 16:9 Ratio, Projector Mount , JBL Bar 2.1 Deep Bass Soundbar(Bundle Pack) Including Transportation charges, etc, completed
1
-
-
Room Sinage Board Using Acrylic Sheet of Size 300 mm x 200 mm, Including Supply, erection, staging / scaffoling, etc, complete.,
45
-
-
Conveyance of Earth/ Debrish to a lead of with in 30 km from site as directed by the engineer including loading, unloading, hire charges for vechicle and other incident charges etc, all complete as directed by the departmental officer.
4741
-
-
PLUMBING WORKS
-
-
-
Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)
26
-
-
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting.
15
-
-
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
38
-
-
Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.) White glazed earthernwere lipped mouth flat back urinal
32
-
-
Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best PVC gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
24
-
-
Supply,Shifting to the place of installation,fixing,testing and commissioning of approved make 15mm CP health faucet ( For EWC ) with including Two way Bib cock (Angle cock with Pillar cock) CP flexible tube 1.0m long, CP crutch, nozzle etc.,complete.
41
-
-
Supply,Shifting to the place of installation,fixing of approved make and model for CP brass two way coat hooks of superior quality with CP screws.
41
-
-
Supply,Shifting to the place of installation,fixing,testing and commissioning of approved make and model one no Concealed stop cock with wall flange,The works shall include cutting and making good the walls/floors.
-
-
-
25mm
17
-
-
Supply,Shifting to the place of installation,fixing,testing and commissioning of approved make and model one no Angular Stop Cock,The works shall include cutting and making good the walls/floors.
5
-
-
DOMESTIC WATER PUMP - ( U.G SUMP TO OHT)
Supply, Installation, Testing, Commissioning and Handing over of 2 nos.Pumps, one no. working and one no. stand-by,for pumping water from U.G sump.The pump control panel with BMS connectivity to be provided. The duty condition of the pump shall be as under: The pump shall be suitable for the following requirements:
Flow rate - 27 M3 / Hr.
Head - 50 mtr.(Approximately) may vary as per Pump Model
The rate quoted shall be inclusive of: Suitable indoor wall mounting type control panel with auto / manual change - over switch including dry run protection arrangement, over load protection, starting capacitor cut-off timer, wiring from panel to motor, earthing etc. complete.
3 Set of Industrial type electronic liquid level controllers with stainless steel probes / sensors or float switch for automatic operation (At Sump & OHT)
2 no. pressure gauge 4" dial with valve tee and fittings.
2 nos.slim seal flap type check valve with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm including a set of GI flanges as per BS-10 table 1 including bolt nuts, GI washers, and neoprene rubber gaskets Complete etc., on the delivery side.
Alarm indication with signal in the event of pump failure etc.
GI manifold of suitable dia on delivery side finished neatly with hot dip galvanizing to 100 microns with flanged end on either sides and collar provision for connectivity of above mentioned valves.
1
-
-
Supply, Installation, Testing, Commissioning and Handing over of Solenoid valve with all accessories for automatic operation of water filling from UG Sump to OHT complete complying with standard specifications and as directed by the departmental officers. (The Same should be got approved by the Executive Engineer before use on works.)
3
-
-
Providing and fixing testing and commissioning of PVC rungs shall be set staggered in two Horizondal rungs which may be not more than 380 mm (from center to center) apart horizontally as well as vertically not more than 300 mm (from center to center) and shall project a minimum of 150 mm beyond the finished surface.The top rung shall be 450 mm below the manhole cover and the lowest not more than 300 mm above the benching/bottam of sump (or) over head tank.
88
-
-
Providing and fixing testing and commissioning 600mm long puddle flange conforming to IS: 2062 of 6mm thick welded GI plate, flanges of sutible size Properly fixed in walls of UG water tank as per specifications with both end threaded with one end plug for sizes up to 50mm and and for sizes 50mm and above with one end flange and other end threaded of following diameters.
-
-
-
25mm dia
1
-
-
32mm dia
1
-
-
50mm dia
2
-
-
65mm dia
2
-
-
Providing and fixing testing and commissioning 600mm long puddle flange conforming to IS: 2062 of 6mm thick welded GI plate, flanges of sutible size Properly fixed in walls of Over Head Tank (OHT) as per specifications with both end threaded with one end plug for sizes up to 50mm and and for sizes 50mm and above with one end flange and other end threaded of following diameters.
-
-
-
40mm dia
4
-
-
50mm dia
4
-
-
150mm dia
5
-
-
Supplying the damaged AC rainwater pipe line with new PVC rain water down fall pipes of 110 mm dia size 4 Kg/cm2 with necessary shoes, specials, clamps, bends, cowl, screws, nails, teakwood block, etc., complete complying with standard specification and as directed by the Departmental officers.
-
-
-
110mm dia pipe
108
-
-
Providing, fixing, testing and commissioning of uPVC rain water head / khurras including removable heavy duty uPVC grating of 3 mm thick uPVC flats (Square) as per approved design The quoted rate shall include for necessary grouting the khurras base with approved sealant complete all as shown in the drawing and as specified.
12
-
-
Renewing the damaged AC rainwater pipe line with new PVC rain water down fall pipes of 160 mm dia size 4 Kg/cm2 with necessary shoes, including specials, clamps, bends, cowl, screws, nails, teakwood block, etc., complete complying with standard specification and as directed by the Departmental officers.
160
-
-
Construction of inspection chamber of folloing size with necessary earth work excavation 40mm size brick jelly concrete inC.M.1:4:10(1 cement,4 Crushed Stone Sand
(Commercially called M-Sand) and 10 broken brick jelly) stock brick work in C.M.1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) for 23cm thick
wall, benching, channelling and plastering, interior, exterior and top with C.M.1:3 (1 cement and 3 Crushed Stone Sand
(Commercially called M-Sand)),12mm thick and providing 7.5cm thick RCC loose slab covering in CC 1:2:4 (1cement and 2 Crushed Stone Sand (Commercially called M-Sand)
and 4 blue granite borken stone jelly of 12mm to 20mm size) with necessary reinforcement
-
-
-
60c x 60cm x 60cm
15
-
-
60c x 60cm x 90cm
18
-
-
Supplying and fixing 15x10cm stoneware gully with 'P'or 'S' trapwith 15x15cm C.I.grating and 10cm dia S.W.bend including 40mm size brick jelly concrete in C.M.1:4:10 ( 1 cement, 4 Crushed Stone Sand (Commercially called MSand) and 10 broken brick jelly 40mm gauge),10cm thick alround the gully, 11cm thick wall with stock brick work in C.M.1:4 (1cement and 4 Crushed Stone Sand (Commercially called M-Sand)) upto ground level and plastering with C.M.1:3 (1 cement and 3 Crushed Stone Sand (Commercially
11
-
-
Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including Specials fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete.
-
-
-
75 mm dia
125
-
-
110 mm dia
410
-
-
Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, includings specials etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works
-
-
-
20 mm dia
100
-
-
25 mm dia
125
-
-
Providing & fixing testing and commissioning of UPVC (Unplastisized Poly Vinyl Chloride) water supply pipes with pipe as per CTS SCH - 40 at a working pressure of 320 PSI at 23 deg C & 80 PSI at 82 deg C, using solvent welded UPVC fittings i.e. Tees, Elbows, Couplers, Unions, Reducers, brushings etc. including Specials,transition fittings connection between UPVC & metal pipe/GI) ie. Brass Adaptors (both Male & Female threaded) conforming to ASTM with only UPVC solvent cement conforming to ASTM F-493 with fabricated & subsequently hot dip galvanized clamps / structural steel supports as required / directed at site including cutting chasing and fixing the same with cement concrete / cement mortar as required, including painting the exposed pipes with one coat of desired shade of enamel paint. All termination points for installation of faucets shall have brass termination fittings,includings Specials . Installation shall be to the satisfaction of PMC /Consultant / manufacturer of pipes & fittings.
-
-
-
25 mm dia
101
-
-
40 mm dia
160
-
-
50 mm dia
150
-
-
Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.
-
-
-
32 mm dia
3
-
-
40 mm dia
5
-
-
50 mm dia
3
-
-
Drilling Bore well anywhere in Chennai city including transportation from one place to another place within alluvial soil or sedimentary rock clay and sand or stone pebbles, boulders etc., by first taking a pilot bore of 140mm/150mm/200mm and the enlarging to required depth direct or reverse rig fuel, drilling the betonite mud and water required for drilling by departmental officers including Specials,construction of mud pts. (water available with a lead of 1.50km)
-
-
-
300mm
30
-
-
150mm
70
-
-
Reaming from 200mm pilot bore to 300mm dia bore upto 60m depth ending below ground level and as directed by the departmental officers.
30
-
-
Supply and laying following dia PVC casing pipe included Specials with excise duty as per IS 12818 / 1992
-
-
-
200mm dia CS ( plain pipe
10
-
-
200mm dia RS
20
-
-
150mm dia RS
70
-
-
Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste included Specials etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers.
-
-
-
200mm dia CS
10
-
-
200mm dia RS
20
-
-
150mm dia RS
70
-
-
Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.
35
-
-
Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.
8
-
-
Supply and fixing of Manhole Cover 60*60 cm
10
-
-
Supply and erection of 2.Hp Submersible Pump set using nylon rope including cost of motor , fixing necessary cable charges and labour charges etc., complete ( For Bore well)
1
-
-
Supplying and fixing in position best quality of HDPE pipes with ISI mark of following dia with specials including cost and coveyance of HDPE pipes and included specials, labour charges for erection of pipes in the borewell and jointing materials etc., all complete as directed by the departmental officers.
130
-
-
FIRE FIGHTING SYSTEM
-
-
-
Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 450 LPM at 20 metres head to develop 2.0 kg/sq.cm at the heightest and farthest hydrant point to make 10m water jet at the time of fire fighting emergency cicumstances, coupled with 3.75KW / 5HP rated three phase 415 volts, 50 Hz, 2880 rpm electrical motor, the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia, including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 538 or Equivalent))
2
-
-
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method of arc welding, including one coat metal primer and two coat Post Office Red painting including Specials, conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: JINDAL / EQUIVALENT.
-
-
-
100mm dia
10
-
-
50mm dia
100
-
-
25mm dia
40
-
-
Providing and fixing of MS brackets (ISMC 75) fabricated out of required size with 6mm / 8mm GI `U' clamps with GI washers and nuts etc., for supporting MS sprinkler pipes running terrace floor (Parapet Wall) The work shall also include making hole grouting the same in RCC slabs / masonry walls with cement concrete and making good the same. for pipes supports including painting with one coat of primer and 2 coats of approved enamal colour paint.
952
-
-
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR /EQUIVALENT
-
-
-
100mm dia
2
-
-
Supply, installation of Fire Fighting Application 180 degree swinging type, hose reel drum with 20mm dia braided thermoplastic hose of 30 metres long, so as to extend to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve and open and close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the Departmental Officers. Make: OMEX / KARTAR / LIFE GUARD / SAFE GUARD / EQUIVALENT.
4
-
-
Supplying and fixing 25mm dia G.M.Gate valve.
4
-
-
Supply, erection, testing and commissioning of Gun metal Gate Valve of size 50mm dia size including necessary MS flange of table ‘E’, gaskets, bolts & nuts etc., installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary, etc., completer as per standard specification and as directed by the Departmental Officers. Make: LEADER / EQUIVALENT.
3
-
-
Providing and fixing of MS brackets (ISMC 150) fabricated out of required size with 6mm / 8mm GI `U' clamps with GI washers and nuts etc., for supporting MS sprinkler pipes running terrace floor (Parapet Wall) The work shall also include making hole grouting the same in RCC slabs / masonry walls with cement concrete and making good the same. for pipes supports including painting with one coat of primer and 2 coats of approved enamal colour paint.
170
-
-
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.
2
-
-
Supply, erection testing & commissioning of pot strainer / Y Strainer. Rate shall include for rubber insertion, bolts, nuts GI flanges.
-
-
-
100mm dia
2
-
-
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY / FIRST / EQUIVALENT.
6
-
-
Photoluminescent Signage with printed "Fire extinguisher"- With Symbol, of Suitable height letters in red with white back ground. and shall be fixed at the height of near Fire Extinguisher.
6
-
-
Supply, erection, testing and commissioning of suitable Pressure Switch of reputed make line Indfoss or Donfoss including necessary valves, couplings, etc., connected with electrical main control panel and setup at proper differential so as to auto start and auto stop the electrical motor, jockey motor including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., completed as per standard specification and as directed by the Departmental Officers. Make: DONFOSS / INDFOSS / ISI
MAKE / EQUIVALENT.
2
-
-
ELECTRICAL WORKS
-
-
-
Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete
1
-
-
Supply and fixing of 200A TPN sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame work with MS cable entry boxes PWD earthing
1
-
-
Supply and laying of 3.5C X 120 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
130
-
-
Supply and laying of 3.5C X 50 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
280
-
-
Supply and laying of 3.5C X 35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
80
-
-
Supply and Clamping of 4C x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
250
-
-
Supply and Clamping of 4C x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
30
-
-
Supply and Clamping of 4C x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
380
-
-
Supply and fixing of brass cable gland for 3-1/2C x 120 sq.mm. PVC armoured LTUG cable with earth connection
4
-
-
Supply and frxing of brass cable gland for 3-1/2C x 50 sq.mm. PVC armoured LTUG cable with earth connection
4
-
-
Supply and fixing of brass cable gland for 3-1/2C x 35 sq.mm. PVC armoured LTUG cable with earth connection
2
-
-
Supply and fixing of brass cable gland for 4C x 16 sq.mm. PVC armoured LTUG cable with earth connection
24
-
-
Supply and fixing of brass cable gland for 4C x 10 sq.mm. PVC armoured LTUG cable with earth connection
30
-
-
Supply and fixing of brass cable gland for 4 C x 6 sq.mm. PVC armoured LTUG cable with earth connection
2
-
-
Supply and providing cable end termination of 3-1/2C x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
2
-
-
Supply and providing cable end termination of 3-1/2C x 50 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
4
-
-
Supply and providing cable end termination of 3-1/2C x 120 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
4
-
-
Supply and providing cable end termination of 4C x 16 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
24
-
-
Supply and providing cable end termination of 4C x 10 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
30
-
-
Supply and providing cable end termination of 4C x 6 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete
2
-
-
Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
1
-
-
Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.
i. 63A 4P MCB - 1 no.
ii. 63A 4P 30MA RCCB/ELCB - 1 no.
iii. 63A DP MCB Isolator -3 nos.
iv. 6A to 32A SP MCB - 12 nos.
4
-
-
Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal /acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.
i. 63A 4P MCB - 1 no.
ii. 63A 4P 30MA RCCB/ELCB - 1 no.
iii. 63A DP MCB Isolator -3 nos.
iv. 6A to 32A SP MCB - 18 nos.
4
-
-
Supply and run of 4 of 6 sq.mm. (84 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour
50
-
-
VERTICAL THREE PHASE DISTRIBUTION BOARD WITH MCBS
Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 III; Impact resistance IK09; Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A)
8 Way, MCCB + 24 Modules - 1No
100A 4 Pole MCCB - 1No.
Triple Pole 63A,10KA - 6Nos.
Triple Pole 32A,10KA - 2Nos.
2
-
-
VERTICAL THREE PHASE DISTRIBUTION BOARD WITH MCBS
Vertical TPN Distribution Boards (with MCCB Incomer); Double Door; IP43, as per IS 8623 III; Impact resistance IK09; Frame MCCB Incomer & Single Phase/Three Phase MCBs as Outgoing (for power loads exceeding 100A)
6 Way, MCCB + 18 Modules - 1 No.
Four Pole 63A, 10KA - 1 No.
Triple Pole 32A,10KA - 4 Nos.
Single Pole 32A,10KA - 6 Nos.
1
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil) Higher End
300
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )
125
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End
30
-
-
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End
10
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End
5
-
-
Wiring with 2 x 4 sq.mm. (56/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil) Higher End
4
-
-
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.
3110
-
-
Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.
295
-
-
Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour.
90
-
-
Supply and Run of 4 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.
80
-
-
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
40
-
-
Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
30
-
-
Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
5
-
-
Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End
13
-
-
Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18")
141
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
2
-
-
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall
16
-
-
Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan
16
-
-
Supplying and fixing of 40W 4 Feet LED Fitting with LED on wall or ceiling with PVC unsheated copper leads from terminal to the fitting
305
-
-
Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug)
6
-
-
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .
25
-
-
Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
490
-
-
Supply and laying of 4 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
270
-
-
Earthing as per PWD standard with an earth electrode of 2 metre Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work
6
-
-
Supply and run of 1 of No.8 SWG GI wire for earth connection
400
-
-
Supply and Run of 1 of No.8 SWG copper wire for earth connection
100
-
-
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
50
-
-
Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltages in the power line due to lighning switching action etc. they must be installed in
the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)
1
-
-
Supply and fixing of 150W LED Flood light fitting with LED (Higher end) on wall with PVC unsheathed copper leads with MS clamps and with painting .
4
-
-
Supply and fixing of 20W LED Gate light fixture mounting with suitable rod and necessary driver, interconnecting wires & fixing hardwares etc , Maximum Power consumption not more than 20W.
4
-
-
MAIN PANEL
LT MAIN PANEL
Supply, erection, testing & commissioning of indoor Wall/Floor mounting dust & vermin proof Freight EB Main Panel Panel cubicle type single bus board comprising of :-
EB NCOMER
1 No.- 200A TPN 35KA MCCB with manual closing mechanism with Rotary handle, fitted with over current and short circuit protection and with 230V shunt trip releases Aux switch of 1 NO + 1 N/C for contacts multiplication etc. as incomer and provided with an instrument chamber having 1 No. - Digital type flush mounting power monitor with RS 485 with inbuilt selectors to indicate the following parameters Current, Voltage, KW,KWhr, Power factor, Frequency, etc.
3 Nos. - 200/5A Class 0.5 15 VA C.T. metering
1 Set. - 3 Nos. R, Y, B indicating lamp to indicate supply position.
1 Set. - 2 Nos. Red & Green indicating lamp to indicate ON-OFF position of breaker.
1 Set. - Amber Breaker trip due to fault indication 1 Set. - Potential fuses/MCB for indicating lamps, meters, control circuit etc.
1 Set. - Outgoing terminals to receive Cables.
SOLAR NCOMER
1 No.- 100A TPN 35KA MCCB with manual closing mechanism with Rotary handle, fitted with over current and short circuit protection and with 230V shunt trip releases Aux switch of 1 NO + 1 N/C for contacts multiplication etc. as incomer and provided with an instrument chamber having 1 No. - Digital type flush mounting power monitor with RS 485 with inbuilt selectors to indicate the following parameters Current, Voltage, KW,KWhr, Power factor, Frequency, etc.
3 Nos. - 100/5A Class 0.5 15 VA C.T. metering
1 Set. - 3 Nos. R, Y, B indicating lamp to indicate supply position.
1 Set. - 2 Nos. Red & Green indicating lamp to indicate ON-OFF position of breaker.
1 Set. - Amber Breaker trip due to fault indication 1 Set. - Potential fuses/MCB for indicating lamps, meters, control circuit etc.
1 Set. - Outgoing terminals to receive Cables.
BUSBAR:
1 - 200A TP & N Bus Bars with Alu. flat with the size having current rating of 0.7A / Sqmm. The bus bars shall be sleeved with colour coded heat be sleeved with colour coded heat shrinkable PVC sleeves with the exception of joint. The bus bars shall be supported at suitable intervel with SMC / FRP as per IS.
OUTGOINGS:
3 Nos.- 100A TPN 25KA MCCB with manual closing mechanism with Rotary handle, fitted with over current and short circuit protection.
2 Nos.- 63A, 4Pole, 10KA, MCB
1
-
-
Supply & Fixixng of SMC box with door arrangement to house 6A SP MCB switch, 4 way connector on suitable hylem sheet
25
-
-
Supply & Fixixng of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 150mm
width and 50mm height
40
-
-
Supply and Instalatin for 1no of 1KVA Inveter with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up
1
-
-
Supply, erection, testing and commissioning of the following rating of UPS Systems for emergency lightings. Supply of Micro Processor Controlled 5 KVA UPS and input supply of 430 Volts ± 15%, 3 Phase, 50 Hz ± 5% and an out put of 230 Volts ±1%, 1 Phase 50 ± 0.01 Hz consisting of Rectifier, Out put Isolation Transformer, Battery Circuit Breaker, Static and Manual Bypass Switches and all others accessories required as per detailed specification .The system should be suitable for independent mode of operation.
Supply of Sealed Maintenance Free Batteries to support 5 KVA for 6 hrs complete with intercell connectors, battery stand made out of Powder Coated MS Angles with adequate supports to carry the load of the batteries as per specification. Installation, Testing and Commissioning of complete 1 nos 5 KVA UPS system in Independent mode of operation with the battery bank including inter connection of UPS and battery banks with adequate size of copper cable, lugs etc. complete as required.
1
-
-
Supply, installation, testing and commissioning of 45 KVAR Automatic power factor correction panel ( APFC ) with 12 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel, enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 12 stage Digital Automatic power factor correction, ( APFC ), Auto / Manual selector switch, cluster LED type indicators, in the incomer, complete with electrolytic grade aluminium bus bars. Incoming of1 set of 125 A ,16kA,TPN Aluminium Bus Bar. outgoing of. 63A,TP MCB with Suitable contactor with 10KVAR Heavy duty capacitor - 3Nos, 32A,TP MCB with Suitable contactor with 5KVAR Heavy duty capacitor - 2Nos, 10A,TP MCB with Suitable contactor with 2KVAR Heavy duty capacitor - 1No.6A,TP MCB with Suitable contactor with 1KVAR Heavy duty capacitor - 2Nos.6A, TP MCB with Suitable contactor with 0.5KVAR Heavy duty capacitor - 2Nos. start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting, Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, MV panel sensing CT interconnecting wiring etc.,
1
-
-
SUPPLY & INSTALLATION OF AIR-CONDITIONER WITH COPPER COIL
-
-
-
2 TR Split Type AC Unit - 5 Star Rated (Make : Ogeneral, Blue Star or equvailent)
6
-
-
Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay
6
-
-
Supply and Laying of 5/8" and 3/8" copper pipe ( Extra beyond 3meters supplied with AC Unit )
30
-
-
Supply and fixing of MS Stand for fixing Outdoor Unit.
12
-
-
Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.
53
-
-
Fixing and Termination of RJ11 Single Point ( Point to Point ) Crimping, Testing and arrangement charges.
5
-
-
Supply & Installation of CAT 6 PVC Module Box
38
-
-
Supply & Installation of Face Plate Single Socket RJ-45
35
-
-
Supply & Fixing of Two meters patch cord in patch panel to Network Switch - 2 Metres Length
35
-
-
Supply & Fixing of One meter patch cord in patch panel to Network Switch - 1 Metre Length
17
-
-
Supply,Erection,Testing & Commisioning of Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink-24 port (PH-1)
1
-
-
Supply,Erection,Testing & Commisioning of Fully Managed 10 / 100 / 1000 Layer-2 with 1G Uplink-8 port (PH-2)
1
-
-
Supply, Erection,Testing & Commisioning of 24 Port Patch Panel – Fully Loaded
2
-
-
Supply and Laying of 2 Pair Unarmoured 0.5mm Telephone cable
200
-
-
Supply and Laying of 10Pair Unarmoured 0.5mm Telephone cable
50
-
-
Supply and Laying of Unarmoured LAN & CCTV Cable - CAT -6
2300
-
-
Supply and Laying of 25mm dia PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
1850
-
-
Supply & Laying of OFC CABLE- 6 Core Outdoor
1395
-
-
Supply & Installation of Indoor 4 Mega Pixel Fixed Dome IP Camera
14
-
-
Supply & Installation of Outdoor 4 Mega Pixel Fixed Bullet IP Camera
4
-
-
Supply,Erection,Testing & Commisioning of 32 channel NVR to support for 18 cameras & in built storage slots with 4nos of 8 TB HDD Capacity.The NVR shall be capable of remote monitoring facility, web application viewing, and central monitoring system with CMS software and mobile application (APP) viewing. The same shall be with Hot standby redundancy on RAID 5. The vendor to submitted hard disk calculation sheet for 30 days backup
2
-
-
Supply, Erection, Testing & Commisioning of PoE Switches For CCTV IP Camera - 24 PORT-PH-1
1
-
-
Supply, Erection, Testing & Commisioning of PoE Switches For CCTV IP Camera - 8 PORT -PH-2
1
-
-
Supply & Installation of Rack with Accessories - 6U Rack (DATA & CCTV)
2
-
-
PA SYSTEM
-
-
-
Supply & Installation of Delegate unit
1
-
-
Supply & Installation of 15W high efficiency PA Wall speaker
27
-
-
Supply & Installation of PA Booster Amplifier-480W
1
-
-
Supply, run, testing and commissioning of 2Core x 1.5sq sqmm PVC insulated Armoured Speaker Cable in suitable 25mm dia Pvc Rigid pipe concealed on wall and ceiling with continuous earth wire connection with painting of suitable colour.
750
-
-
Supply & Installation of 240Watts high quality mixer amplifier with built in MP3 player in standard 19" rack mountable chassis.
2
-
-
Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.
1
-
-
Supply and Laying of 20mm dia PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
550
-
-
Supply and fixing of 10 pair krone connector box in suitable FRP mounting box including termination of conduits, two pair telephone wire, incoming multicore telephone cables etc.
2
-
-
Safety Accessories
-
-
-
Supply of 2m x 1m Rubber 3mm thick Mat suitable for LT installation confirming to IS
2
-
-
First Aid Box complete with all First Aid Medicines
1
-
-
Shock Treatment Chart fixed in glass frame
1
-
-
4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle
1
-
-
Hand Gloves 11KV Grade
2
-
-
Danger Board as required by the Electrical Authorities
2
-
-
Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements