Chennai Metropolitan Development Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Chennai Metropolitan Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jul 2024
Closing Date5 Aug 2024
Tender AmountRefer Documents
Costs
EMD
₹ 20,10,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CMDAC_465421_1Bid Award Id
ViewTender No
01(Kolathur fish centre)/2024-25Tender Authority
Chennai Metropolitan Development Authority ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Pile load test on 600mm dia piles as specified in IS:2911 (Part 4).
-
-
-
Supply Conducting Pile integrity tests (PIT) on the piles under each cluster by using a 6 lbs nylon tipped hand held hammer, glueing sensitive accelerometer on top of the pile by petro wax or petroleum jelly after making the pile head smooth and even by disc grinder, providing stage wise and final report along with relevant conclusions etc., as directed by Client / Engineer-in-charge. as per latest IS-2911.
25
-
-
Carrying out initial Working pile load test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete.
2
-
-
Carrying out Dynamic Load Test on specified dia piles as specified in IS:2911 (Part 4). Includes all plant, equipment, machinery, instruments, measuring devices, platforms and kentledge pile caps etc., dismantling and carting away entire setup, excavation and dewatering etc., all complete.
5
-
-
Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
-
-
-
Foundations, Grade beam
725
-
-
Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc.,
4100
-
-
Plain Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
1003
-
-
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.9 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.
5500
-
-
For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
19500
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.
5615
-
-
Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. Rate to include all leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer in charge
-
-
-
For Foundation and Basement
1522
-
-
For Ground floor
1150
-
-
For First floor
1050
-
-
For Second floor
1000
-
-
For Terrace floor
275
-
-
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
1118800
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
-
-
-
For Ground floor
1039
-
-
For First floor
600
-
-
For Second floor
540
-
-
For Terrace floor
90
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used.Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
-
-
-
For Ground floor
176
-
-
For First floor
176
-
-
For Second floor
176
-
-
Supplying and filling the sunken slab area by BRICKBATCOBA
by adding CICO NO:1 or approved equivalent admixture at the rate specified in the manufacturer's specification after entire completion of laying pipes, sanitary fittings etc.
Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, testing, consumables, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
480
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
9516
-
-
External wall Plastering with Cement Mortar 1:4 (One Cement and Four Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including scaffolding, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.
2303
-
-
Internal wall Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
20015
-
-
Painting two coats of newly plastered wall surface with ready mixed Exterior Emulsion Paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
2350
-
-
Painting two coats of newly plastered Ceiling and wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
29529.6
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
670
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
3350
-
-
Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.
4870
-
-
Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge. (Including Skirting work)
4635
-
-
Flooring with following Designed antiskid ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
495
-
-
Dadoing walls with following best approved quality, Designed colour ceramic tiles 450 x300 sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
1050
-
-
Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top and staircase areas of 18 mm thick (Steel grey) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge. - Polished Steel Grey Granite
200
-
-
Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge - Flamed Steel Grey Granite
582
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
88
-
-
Plain Pre-laminated Door - ABS DOOR / EQUIVALENT
Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work. M-0677
-
-
-
Anodised (Black) Aluminum Louvers with Internal Glazed Openings as per design
-
-
-
1000 X 2100 mm
57
-
-
800X 2100 mm
121
-
-
Supply and erection of Double Leaves Fire Rated Door with Frame having the dimension of 1800mm x 1400mm with following specification:
a. Door Frame 1.6mm: Galvanized 120 GSM branded makeJSW
b. Door Leaf 1mm: Galvanized 120 GSM branded make JSW
c. Shutter Thickness: 46mm
d. Honeycomb: In-fill
e. Glue Macroplast UR-7221
f. Door Hinges: 4" x 3" x 3mm, Double Ball: Make Assa Abloy
Yale Ball bearing Butt Hinges Grade SS 304 - Finish SS
g. Door Closer with Standard Arm Finish: Silver
h. Lock Set: Dead Lock with both side key
i. Door Orientation: To be confirmed by client
j. Mounting of door: Brick wall mounted
k. Powder Coating: Powder coated in standard RAL paint
colour of PO Red (60 to 90) Microns
l. Single Point Panic Bar (2 Horizontal): Make Assa Abloy Yale
or Equivalent
m. Dead Lock with both side key: Make Assa Abloy Yale or
Equivalent
n. Vision Panel 200 x 300mm 2 Hrs. Fire Glass Schott Pyran
with Frame
o. Rated Glass Schott Pyran with Frame
p. Anchor Bolt with Endcaps
The above assembly mounted on concrete or brick wall including the cost of cutting, chipping, concrete packing, pastering, scaffolding all other conveyence as per standard methods and as directed by the Departmental Officers.
17
-
-
UPVC Window :Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm125GSMand 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDMrubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided withEspag multi power point locks and also it operates ashandle. The corners and joints should be welded andcleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to theshutter and it should not allow leakage of water evenat most ranging storms and should have key lockableaction, security protective hinges, strong lockingsystems and as per size for arresting noise and energyloss. The connecting mechanism between sash andouter frame that enables opening of the window. Thewindow should be fixed to the wall with 100% packingwith screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work
78.8
-
-
UPVC Ventilator
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
6.5
-
-
Glass handrail for railling
Supply & fixing for SS 50mm X 1.5mm Thick Top pipe, 5mm+1.52PVB+5mm clear Laminated Toughened glass, 50mm SS Bush, Pipe To Glass Holder, Holes, Installation, All SS will be polished to a matt finish All SS Grade 304,
550
-
-
Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
2024.3
-
-
Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade and Providing, assembling and supplying of laminated glass panels using heat Strengthened clear Glass and toughened glass sandwiched using 1.52PVB layer.
SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement.
258
-
-
Supply, fabrication and erection of Structural Steel members for installation of Steel Canopy including enamel painting complete and the same shall comply to All primary steel member such as column and rafter conform to grade E-350 as per is 2062. All cold form steel members such as purlin shall conform to grade E-350 as per is 811. Steel members such as bracings, angles, conform to grade E-250 as per is 2062. All secondary structural steel plates such as base plates, end plates, shall conform to grade E-350 (FE 490) as per is 2062.
57700.6
-
-
Supplying and Erecting Pull and Push Type Rolling Shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc ROLLING SHUTTERS (WITH ISI MONOGRAM) Gear operated type (from 8 sqm to 12sqm. Area) (PWD SOR 24-25)
957.6
-
-
Providing and Construction of dowel jointed, Pavement Quality Concrete of 250mm thickness over a prepared Base Course with 43/53 grade cement , coarse and fine aggregate conforming to IS 383, coarse aggregate 25 mm & 12.5 mm Granite/Basalt/Trap metal & clean sieved approved sand conforming to the gradation as specified in Table 600-3 of MORTH clause 602,. loading materials to cement concrete batch mix plant of adequate capacity ( normally 25% more capacity than the paving equipment preferably 120 Cum/hour ) as per approved mix design satisfying the characteristic flexural strength of not less than M30 grade of concrete with minimum cement content as per IS 456 - 2000.
-
-
-
The mix shall be transported to site in transit truck /tippers/ dumpers of 5-6 Cum capacity, laid with a slip form paver with electronic sensor fitted with vibrators which shall operate at a frequency of 8000-10000 impulses per minute under load with a maximum spacing of 600mm and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, fixing of Dowel bars and Longitudinal tie bars ,joint filler, separation membrane, sealant primer, joint sealant, debonding strip, curing compound as approved, finishing with power trowel to the required grade, level and alignment, textured with texturing machine, finishing, making groove cutting for contraction joint of size (10 X 20 mm) and filling the same with Polysulphide/Polyurethane sealant with paper backed compressible debonding strip, making groove cutting for longitudinal joint / expansion joint of size (8 X 13 mm) and filling the same with
-
-
-
Polysulphide/Polyurethane and debonding tape,providing Isolation joint of 20mm wide to the full depth of the concrete and fixing with isolation pad of 20mm thick and sealing the top with Polysulphide/ Polyurethane to the size of 20 X 20 mm and curing (curing shall be as per clause 602.9.12 of MORTH) including cost of all materials, labour, lead and lift, hire charges of machineries , including the initial saw cut and filling of Polysulphide/Polyurethane sealants in contraction, expansion joints etc., complete in accordance with MORT&H technical specification clause No. 602 and with all other incidental charges including the trial length and as per the direction of the Engineer-In-Charge of work. (Reinforcement and Dowel bars shall be paid under relevant item)
2645
-
-
Supplying And Fixing of Rubber Moulded Grey Premium Concrete Kerb of Size 450X125X300mm Using M30 Concrete. The Concrete Shall Be Moulded By Table Mount Vibrated With Polypropylene Fibers At 5% And Curing Compound. The Rate Shall Include Cost of Materials, Transportation, Loading & Unloading Charges And including Necessary Earth Work Pointing With cm. 1:3 To Full Depth Curing Thread Lining etc., completed as standard specification and as directed by the engineer-in-charge.
600
-
-
Supplying And Fixing Rubber Moulded Interlocking Blocks Against Available Edge Restraints 80 mm Thick of Approved Design And Pattern of Strength 40 N/Sq.m. 10 mm Iss Metal With Minimum Cement Content As Applicable To M 40 Grade Concrete As Per Is-456-2000 Manufactures By Mechanical Or Hydraulic Machine Using Vibro- Compaction Process And Laid Over 50 mm Thick Laying Course (Bedding) Crushed Stone Sand (M Sand) Well Compacted
By Plate Compactor With A Joint Width of 2 mm To 5 mm Including Filling of All Joints With Crushed Stone Sand (M Sand) And Compacting The Paved Surface With Plate Compactor Two Or Three Times Until All The Unit-To- Unit Joints Are Completely Filled With Crushed Stone Sand (M Sand) And Trimming The Edges Neatly Including All Labour Charges And Plate Compactor Charges Etc. Complete(Cost Inclusive of Crushed Stone Sand (M Sand)).
2000
-
-
Providing and fixing 10 mm thick solid Polycarbonate sheet using nessesary MS support structure from the ground. as per given technical specifications. The sheet will be mounted on hot dip galvanized steel frame work with the help of specially designed aluminum pressure pad profile and zinc coated pinhead self-drilling screw with rubber gasket for proper griping & to prevent noise leakage
585
-
-
Providing and fixing welded M.S. grills to the window openings, along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc, complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use and as directed by Engineer-in-charge
582
-
-
PLUMBING WORKS
-
-
-
Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.
78
-
-
Supplying and fixing of indian make white glazed earthern ware flat back urinal of ISI make of (HxWxP :44cm x 31.5cm x 26.5cm) provided with inlet connection using 15mm flexible PVC connection house of suitable length, 15mm CP push cock and 32mm bell mouthed PVC connection waste pipe etc., fixing to the wall in position with necessary teak wood plugs, clamps, screws etc., Rate inclusive for cost of materials labour and transport charges etc., complete (the urinal anf fittings should be got apprioved by the Engineer - In- charge before use on work.
60
-
-
Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G,M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15mm C.P. Pillar tap etc.,
60
-
-
Supplying & fixing in position C.I./PVC Nahini trap /Floor trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I./PVC Nahini trap /Floor trap of various sizes should be got approved by the Executive Engineer before use on works ).
230
-
-
sizes PVC Soil/ Waste /Rain water pipes 6Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the dismantled portions to the original condition complying with standard specification.(Internal, External & Rain water system)
-
-
-
Cost of PVC pipe 200Ø
60
-
-
Cost of PVC pipe 160Ø
930
-
-
Cost of PVC pipe 110Ø
300
-
-
Cost of PVC pipe 75mmØ
800
-
-
Cost of PVC pipe 50mmØ
135
-
-
Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).
35
-
-
Constructing brick masonry manhole with Solid blocks in CM 1:5 (one of cement, fivr of sand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate) 20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard
specification.
-
-
-
Manhole 600 x 600 mm internal size ( Depth up to 1000mm)
40
-
-
Manhole 900x900x1000-1400 mm Size
15
-
-
Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the dismantled portions to original condition with necesscary brick work and plastering wherever necessary scaffolding charges above ground level upto 4 m height. (Internal,Terrace&External Water supply)
-
-
-
Cost of 20 mm dia UPVC pipe
670
-
-
Cost of 25 mm dia UPVC pipe
395
-
-
Cost of 32 mm dia UPVC pipe
385
-
-
Cost of 40 mm dia UPVC pipe
50
-
-
Cost of 50 mm dia UPVC pipe
40
-
-
Cost of 65 mm dia UPVC pipe
380
-
-
Cost of 80 mm dia UPVC pipe
100
-
-
Cost of 100 mm dia UPVC pipe
220
-
-
Supplying & fixing in position first quality & approved variety of various dia Gun metal Gate valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.
-
-
-
Cost of 20mm dia Gate Valve
85
-
-
Cost of 25mm dia Gate Valve
15
-
-
Cost of 32mm dia Gate Valve
30
-
-
Cost of 40mm dia Gate Valve
5
-
-
Cost of 50mm diaGate Valve
5
-
-
Cost of 65mm dia Gate Valve
5
-
-
UG Sump&Over Head Tank Cover
Supply and fixing of SFRC Manhole Cover 60 x 60cm (Heavy Duty) with Frame as complete in all respects complying with relevant standard specifications and as directed by the Engineer-in-charge
35
-
-
Providing and fixing 600 mm long MS hot dip galvanized PUDDLE FLANGES fabricated out of 6 mm thick MS plates of suitable size and IS:1239 heavy class pipes properly fixed in RCC walls & top slab of tanks. The entire fittings shall be hot dipped
galvanized after fabrication. Length shall be minimum 600 mm or wall thickness plus 200 mm on either side (which ever is more).
-
-
-
100mm MS Puddle Flange
15
-
-
80mm MS Puddle Flange
10
-
-
65mm MS Puddle Flange
15
-
-
50mm MS Puddle Flange
10
-
-
40mm MS Puddle Flange
5
-
-
32mm MS Puddle Flange
8
-
-
25mm MS Puddle Flange
10
-
-
Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 15000 LPH @ 35M, max. total head of 40M pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge..
(RAW TANK 1&2 TO DOMESITC OHT)
2
-
-
Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 45000 LPH @ 35M, max. total head of 40M pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge..
(RAW TANK 3&4 TO FISH WATER OHT 1 & 2)
4
-
-
Supply, installation, testing and commissioning of RO plant,(1000 LPH) with all accessories as required
1
-
-
Supply, installation, testing and commissioning of water treatment plant, which contains Pressure Sand filter, carbon filter and chlorination system (5000 LPH) with required pumps and accessories as required
1
-
-
ELECTRICAL WORKS
-
-
-
11 KV HT System
-
-
-
11KV RMG
Supply,Installation,Testing and Commissioning of OUTDOOR Weather & Dust proof Type, floor mounting, free standing type 11KV Ring Main Gear unit made out of M.S sheet steel clad dust and vermin proof with 630A Copper Busbars, Interconnections, necessary protections, Measuring Instruments, Indicating Instruments, Protection Relays, CTs, PT with necessary control fuses/MCBs, Termination arrangements for Incoming and Outgoing Cable of as per EB authorities approval ,earthed cable, Terminal Blocks, Earthing,Powder coated painting, Sign writing and Base channels etc., with complete all accessories as required for satisfactory operations and as per the detailed Technical Specifications enclosed and as per EB Requirements comprising of the following.
1
-
-
INCOMER (2 Sources) :
-
-
-
11kV, 630A, 500MVA Load break Switch with necessary required accessories - 2Nos
-
-
-
OUTGOING :
-
-
-
11kV, 630A, 500MVA vaccum Circuit Breaker with necessary required accessories : 1No
-
-
-
The RMG panel shall be manufactured as required by the electrical authorities and approval shall be obtained including testing & commissioning and any additional features required by the supply authorities shall be carried out at no extra cost.Rate shall inclusive of factory witness test as specified in the technical specification (Make : ABB/C&S/L&T)
-
-
-
11KV SINGLE VCB HT PANEL-OUTDOOR TYPE
-
-
-
Supply,Installation,Testing and Commissioning of outdoor type Weather & Dust proof Type, floor mounting, free standing 11KV HT Panel made out of M.S sheet steel clad dust and vermin proof with 630A Aluminium Busbars, Interconnections, necessary protections, Measuring Instruments, Indicating Instruments, Protection Relays, CTs, PT with necessary control fuses/MCBs, Termination arrangements for Incoming and Outgoing Cable of 2R 11 kV 3Core 185 Sq mm XLPE Alu.Armoured (earthed) cable, Terminal Blocks, Earthing,Powder coated painting, Sign writing and Base channels etc., with complete all accessories as required for satisfactory operations and as per the detailed Technical Specifications enclosed and as per EB Requirements also and as comprising of the following.
1
-
-
11kV, 630A, 500MVA VCB (Vaccum Circuit Breaker)with necessary required accessories - 1No
-
-
-
With necessary Aluminium busbars and meterings as per shown in the drawing ,phase indication lamp, MCB and switch control etc. with provision for accomodating 11kV, PT, CT meterings, all protection relays with necessary C.T. and also refer as per the detailed specification & Single Line diagram attached. Panel should be extendable type.The HT Panel shall be manufactured as required by the electrical authorities and approval shall be obtained including testing & commissioning and any additional features required by the supply authorities shall be carried out at no extra cost.The Panel shall be designed for exendable in future.Note:-The panel should be having provision to compatibility with IBMS.Rate shall inclusive of factory witness test as specified in the technical specification (Make : ABB/C&S/L&T)
-
-
-
Supplying,erecting.connecting and commissioning of 1000KVA,11KV/ 433V Oil filled COPPER Wound Outdoor Type Transformer with ON Loadtap Changer and Indoor type RTCC panel located on necessary foundation arrangement, flat channels to place the wheels and stoppers. The following techinical specifications are made,
A.The Type of cooling shall be oil immersed, natureal cooled core type double would construction and the corresponding rating for each transformer shalle be indicated in the specific requirement.
B.It shall be possible to operate the transformer satisfactory, up to overloads of 150% of the rated value in confirmation with the loading guide specified in relevant IEC/BS Standards.
C.Short Circuit current = (Rated current x 100)% Impdence
D.All outdoor apparatus/fittings shall be designed such that they do not colled water at any point.
E.The Transfomer shall be capable of continuous operation at full load rating under the following condition.
1
-
-
1.Voltage variation = 10%
2.Frequency Variation = 5%
3.Combined Voltage and Frequency Variation = 10%
F.The transformer shall be ONAN,Cooled, suitable for outdoor installations.
The Core Clamps frame shall be provided with lifting eyes having ample strength to lift the complete core ad winding assembly.
G.A Marshalling box made with sheet of 2.5mm thick(CRCA) conforming to IP65 degree of protection shall be located near each transformer.The marshalling box contain all accessories that are required for the transformer.
The Following items apart from regular marshalling box instruments shall be equiped.
1.Triple Pole line isolated switch
2.HEC Fuse/MCCB
3.Strip heater,Thermstat controlled with switch
4.Control circuit with MCB.
5.Cubile lamp with door switch.
6.Mushroom type "RED" emergency stop button with acrylic shroud.
-
-
-
7.The HV terminal arrangement shall be as per specific requirements.The Phase sequence in the LV bus duct shall be as per the purchases choice and the same shall be decided during detailed engg. stage.
8.All sheet surface be thoroughly cleaned by sand blasting or chemical agents as required too produce a smooth surface free of scale,grease and rust. The rate also includes Loading, Unloading and receiving at site, loading,storing,lifting etc., complete. ( Make : Indotech, GE, Hitachi, Siemens )
-
-
-
Supply, Erection, Connecting, Testing & commissioning of 1600 Amps TPN SANDWICH type Aluminium busduct with necessary straight runs,bends,risers,brackets from the transformer to Main MV panel. The busduct shall be properly supported through proper brackets.The busbar size shall be same as in the respective receiver panel.The Cost shall also necessary support for the same.Necessary flexible joints shall be provided in the straight run as per the standards.The rating of the busbar should be considered as 0.8Amps per Sq.mm.2R of 50 x 12mm Hot Dipped GI flats as continuous earthing shall be provided along with the busducts.
A)1600 AMPS TPN Sandwich type bus duct straight runs - INDOOR TYPE including all necessary in between flexibles.
B)Supply,fixing and connecting flexible joints at the end of each bus duct sections,
NOTE:
1.Proper supports shall be provided at the a)Transformer LV terminal Box
b)Points where the Bus duct crossed the wall and c)Receiving ACB shall br provided insuch a way that the weight of the Bus duct does not bear on the transformer and Main MV panel.
d)Necessary insect proof ventilation arrangements (Make : ABB/C&S/L&T) .
20
-
-
Supplying, erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE MAIN MV PANEL with necessary foundation channels, etc., The cost shall also including unloading, positioning, etc., The Board shall be incorporated with the following:- Single Busbar type Panel Board
All MCCB Shall be of thermal Magnetic type with adjustable overload and fixed short circuits
EB INCOMER -1
1No. of 1600AMPS 4P 50KA for 1 second Air Circuit breaker electrical drawout(EDO) type 4P with Micro processor based release and mechanical & electrical interlock with Emergency STOP push button shall be provided, each fitted with the following:
Micro processor based protection release with adjustable over load, adjustable short circuit with time dealy, instant short circuit(15 In), Adjustable earth fault with adjustable time delay protection, external CT for star point of transformer for the earth fault protection. Motor coil shunt trip coil shall be 230V AC.Under voltage coil shall be 415V AC,safty shutter & door interlock shall be provided. ready to close indication ,test and test to trip button.1600/5A 15va, CL-1 CT for APFC relay. 1no CT operated load manager (LM) and 1 set of RYB indication lamp to be provided. The incoming terminal shall have a provision to terminate 1600Amps TPN.AL BUSDUCT. Means extended busbars shall be given.
1
-
-
DG INCOMER - 1
1No. of 800AMPS 4P 50KA for 1 second Air Circuit breaker electrical draw out(EDO) type 4P with Micro processor based release and mechanical & electrical interlock wih Emergency STOP push button shall be provided, each fitted with the following:
Micro processor based protection release with adjustable over load, adjustable short circuit with time delay, instant short circuit(15 In), Adjustable earth fault with adjustable time delay protection, external CT for star point of transformer for the earth fault protection. Motor coil shunt trip coil shall be 230V AC.Under voltage coil shall be 415V AC,safty shutter & door interlock shall be provided. ready to close indication ,test and test to trip button.800/5A 15va, CL-1 CT for APFC relay. 1no CT operated load manager (LM) and 1 set of RYB indication lamp to be provided. The incoming terminal shall have a provision to terminate 630Amps TPN.AL BUSDUCT. Means extended busbars shall be given.
DG INCOMER - 2
1No. of 800AMPS 4P 50KA for 1 second Air Circuit breaker electrical draw out(EDO) type 4P with Micro processor based release and mechanical & electrical interlock with Emergency STOP push button shall be provided, eachfitted with the following:
-
-
-
Micro processor based proetion release with adjustable over load, adjustable short circuit with time dealy, instant short circuit(15 In), Adjustable earth fault with adjustable time dealy protection,externalCT for star point of transformer for the earth fault protection.Motor /Colsing coil shunt trip coil shall be 230V AC.Under voltage coil shall be 415V AC,safty shutter & door interlock shall be provided.ready to close indication ,test and test to trip button.800/5A 15va, CL-1 CT for APFCrelay. 1no CT operated load manager (LM) and 1 set of RYB indication lamp to be provided.The incoming terminal shall have a provision to terminate 630Amps TPN.AL BUSDUCT. Means extended busars shall be given.
1No. of 630AMPS 4P 50KA for 1 second Air Circuit breaker electrical draw out(EDO) type 4P with Micro processor based release and mechanical & electrical interlock with Emergency STOP push button shall be provided, each fitted with the following:
Micro processor based protection release with adjustable over load, adjustable short circuit with time dealy, instant short circuit(15 In), Adjustable earth fault with adjustable time delay protection,external CT for star point of transformer for the earth fault protection. Motor coil shunt trip coil shall be 230V AC.Under voltage coil shall be 415V AC,safty shutter & door interlock shall be provided.ready to close indication ,test and test to trip button.800/5A 15va, CL-1 CT for APFC relay. 1no
-
-
-
CT operated load manager (LM) and 1 set of RYB indication lamp to be provided. The incoming terminal shall have a provision to terminate 630Amps TPN.AL BUSDUCT. Means extended busbars shall be given.
BUS COUPLER:
2Nos of 1600A 4P 50KA for 1 second Air circuit breaker electrical draw our(EDO) type 4P with micro processor based release and mechanical & electrical interlock with Emergency STOP push button shall be provided each fitted with the following:
INTERLOCKING ARRANGEMENT:
Electrical interlock arrangements shall be provided between the EB Incomer, 1 & 2 BusCoupler and DG Incomer 1 & 2
OUTGOING:
SECTION-1
250A TPN+N MCCB with 50kA(Ics) withstanding capacity with Micro processor based O/L,S/C E/F Protection with RS585 communication. The MCCB shall be double breaker type.3 Nos. Resin cast CT's ration 200/5A of class 1.0 for measurement CT burden shal be 15VA.1 No of Digital dual source MFM with RS485c(V,A.f.pf,Kwhr) Control MCB's shall be provided with necessary interconnection and accessories. On,OFF & TRIP indication Lamps of LED clustered type and control MCB shall be provided....6Nos.
-
-
-
400A TPN+N MCCB with 50kA(Ics) withstanding capacity with Micro processor based O/L,S/C E/F Protection with RS585 communication. The MCCB shall be double breaker type.3 Nos. Resin cast CT's ration 400/5A of class 1.0 for measurement CT burden shal be 15VA.1 No of Digital dual source MFM with RS485c(V,A.f.pf,Kwhr) Control MCB's shall be provided with necessary interconnection and accessories. On,OFF & TRIP indication Lamps of LED clustered type and control MCB shall be provided....1No. 630A TPN+N MCCB with 50kA(Ics) withstanding capacity with Micro processor based O/L,S/C E/F Protection with RS585 communication. The MCCB shall be double breaker type.3 Nos. Resin cast CT's ration 630/5A of class 1.0 for measurement CT burden shal be 15VA.1 No of Digital dual source MFM with RS485c(V,A.f.pf,Kwhr) Control MCB's shall be provided with necessary interconnection and accessories. On,OFF & TRIP indication Lamps of LED clustered type and control MCB shall be provided....1No. 32 Amps 4P MCB…2Nos(One for OLTC and other in DG set Sensing) 250A TPN+N MCCB with 50kA(Ics) withstanding capacity with Micro processor based O/L,S/C E/F Protection with RS585 communication. The MCCB shall be double breaker type.3 Nos. Resin cast CT's ration 200/5A of class 1.0 for measurement CT burden shal be 15VA.1 No of Digital dual source MFM with RS485c(V,A.f.pf,Kwhr) Control MCB's shall be provided with necessary interconnection and accessories. On,OFF & TRIP indication Lamps of LED clustered type and control MCB shall be provided....6Nos.
-
-
-
400A TPN+N MCCB with 50kA(Ics) withstanding capacity with Micro processor based O/L,S/C E/F Protection with RS585 communication. The MCCB shall be double breaker type.3 Nos. Resin cast CT's ration 400/5A of class 1.0 for measurement CT burden shal be 15VA.1 No of Digital dual source MFM with RS485c(V,A.f.pf,Kwhr) Control MCB's shall be provided with necessary interconnection and accessories. On,OFF & TRIP indication Lamps of LED clustered type and control MCB shall be provided....1No. 1600A Aluminium Bus bar:
Electrolyric high conductivity aluminium(Size based on 0.7 per sq.mm)three phase and beutral busbar rated at 1600A(50kA)Amps,insulated with heat shrinkable coloured PVC sleeves MCCB shall of 100% Ics type.
The Phase Bus bar shall be 3 Runs of 75mm x 12mm Aluminium
The Neutral Bus bar shall be 3 Runs of 75mm x 12mm Aluminium
The Earth Bus bar shall be 2 Runs of 50mm x 12mm Aluminium
Note: The current density of Aluminium main busbar and interconnection bus bar for incomer and outgoing is 0.7/Sq.mm
-
-
-
i)3 Nos. Dual Core tape wound CT ration 1600/5A of Class 1.0 for interconnection and class 5P10 for protection. The CT burden shall be 15VA
ii)3 Nos. tape wound CTs ratio of 630/5Amps Class 1.0 to be mounted one of the phase busbar RPFC panel.
iii)RYB indicator lamps of LED cluster type and controlled MCB shall be provided.
iv)Single phase preventor to be provided.
v)SPD type 1 to be provided with 125A TPN HRC Fuse 100kA
(Make : ABB /C&S/ L&T) .
-
-
-
Supply, erecting, connecting and commissioning of FLOOR Mounted Cubicle type Detuned rector APFC panel with necessary foundation channels etc.
INCOMER: 630A TPN MCCB with 36KA(ICS) withstanding capacity of electrically operated.
OUTGOING: 200A TPN MCCB with 36KA(Ics) Withstanding capacity with 170AMPS TP Contactors, thermal overload relays. The Coil Voltage shall be 415V AC suitable for connecting 50KVAR Capacitor with ON/OFF illuminated pushbuttons…6Nos
100A TPN MCCB with 36KA(Ics) Withstanding capacity with 50AMPS TP Contactors, thermal overload relays. The Coil Voltage shall be 415V AC suitable for connecting 25KVAR Capacitor with ON/OFF illuminated pushbuttons…2Nos
63A TPN MCCB with 36KA(Ics) Withstanding capacity with 40AMPS TP Contactors, thermal overload relays. The Coil Voltage shall be 415V AC suitable for connecting 15KVAR Capacitor with ON/OFF illuminated pushbuttons…2Nos
63A TPN MCCB with 36KA(Ics) Withstanding capacity with 40AMPS TP Contactors, thermal overload relays.
1
-
-
The Coil Voltage shall be 415V AC suitable for connecting 10KVAR Capacitor with ON/OFF illuminated push buttons…2Nos
A 12 Steps APFC relay with transducer shall be incorporated to the maintain the power factor. The panel shall also be made suitable to accommodate the following capacitor banks with all interconnections.
50KVAR – 6Nos
25KVAR – 2Nos
15KVAR – 2Nos
10KVAR – 2Nos (Make : ABB /C&S/ L&T)
-
-
-
Supplying,erecting, connecting and commissioning of FLOOR MOUNTED CUBICLE TYPE COMMON PANEL with necssary foundation channels, etc., The cost shall also including unloading, positioning,etc., The Board shall be incorporated with the following:-
INCOMER:
200AMPS TP+N MCCB - 1No.
OUTGOING: 63AMPS TP+N MCCB …13Nos.
BUSBARS : ALUMINUM
RATING : 400 AMPS
The Phase Bus bar shall be of 50 x 6mm. and the Neutral bar shall be 25 x 6 mm. The Earth Bus bar shall be 2 Runs of 25 x 6mm. There shall be One set of Metering Compartment incorporated with the following:-
i) 3 Nos Tape wound CTs of ratio 200 /5A and Class 1. 0 for Metering and burden 15 VA. ii) 1 No. Class 1.0, 96 Sq.mm. Digital Muilt function meter ( V, A, f, Kwhr ).
iii) RYB Indicating Lamps of LED Clustered type and
Control MCBs shall be provided.
CABLE ENTRY : TOP / BOTTOM .
1
-
-
Metering Panel - Supply, Installation, Testing and Commissioning all metal floor mounted meter board incorporated with the following. The cost of the foundation channels shall also be including in the rate. The Cost shall also includes unloading and positioning.3Nos.250Amps TP cutouts with 200Amps neutral link properly fixed on the sheet steel with necessary accessories with 200Amps 4P Aluminium Busbar. The Phase busbar shall be 50x6mm and the neutral busbass shall be 50x6.The Board shall be provided with 2Rus of 25x6mm Aluminium busbars of earthing. Space for fixing 24Nos of direct operated single phase dual source energy meter with RS485 Com Port necessory accessories.24Sets of 1Nos. 32A SP cutout with neutral link properly fixed on the sheet steel.1Set of 3Nos. 200A TP cutout with neutral linkls propoerly fixed on the sheet steel.30Sets of interconnection between the coutout,MCB and the Meter shall be done with16Sq.mm.Cu PVC insultated strandard copper conductor wires with crimped type lugs / sockets, etc.RYB indicating Lamps of LED Clustered type and Control toggles switch per each phase shall be provided for the Main EB cut-out chamber door. CRCA sheet Thickness : 14SWG for door and Frames 16SWG for others. Foundation Channel - 3mm thick
Cable Gland - 14SWG Painting: Powder Coated RAL 7032 and Black Color for the foundation channel.
8
-
-
Metering Panel - Supply, Installation, Testing and Commissioning all metal floor mounted meter board incorporated with the following. The cost of the foundation channels shall also be including in the rate. The Cost shall also includes unloading and positioning.3Nos.250Amps TP cutouts with 200Amps neutral link properly fixed on the sheet steel with necessary accessories with 200Amps 4P Aluminium Busbar. The Phase busbar shall be 50x6mm and the neutral busbass shall be 50x6.The Board shall be provided with 2Rus of 25x6mm Aluminium busbars of earthing. Space for fixing 1No of direct operated single phase dual source energy meter with RS485 Com Port with necessory accessories. 1No. 100A TP cutout with neutral link properly fixed on the sheet steel.1Set of 3Nos. 200A TP cutout with neutral linkls propoerly fixed on the sheet steel.30Sets of interconnection between the coutout,MCB and the Meter shall be done with16Sq.mm.Cu PVC insultated strandard copper conductor wires with crimped type lugs / sockets, etc.RYB indicating Lamps of LED Clustered type and Control toggles switch per each phase shall be provided for the Main EB cut-out chamber door. CRCA sheet Thickness : 14SWG for door and Frames 16SWG for others. Foundation Channel - 3mm thick
Cable Gland - 14SWG Painting: Powder Coated RAL 7032 and Black Color for the foundation channel.
1
-
-
Supply, Erection, Testing and Commissioning of 320KVA Diesel Generator set with AMF control panel, comprising of Water cooled CPCB developing @ 1500 RPM and Alternator, complete with type approved canopy and all accessories. with the following technical specification:
*Industries most reliable engines, proven over decades.
*Low emission, High efficiency.
*Compact, robust and rugged design.
*Engine Dry type air cleaner
*Exhaust Silencer (Residential type) Hospital Grade.
*Expansion bellow
*Lube oil cooler Lube oil filter (“Spin-on” type)
*Fuel Filter (“Spin-on” type)
*In line mono block fuel injection pump with Electronic Governor and fuel feed pump.
*Dynamically balanced Flywheel with starter ring
*Electronic Governor :Governing class G2(as per ISO 8528 part V) *SAE 1 flywheel housing and flywheel suitable for SAE 14 disc coupling for close coupling of single bearing alternator.
2
-
-
*Exhaust gas turbocharger 24 Volt electric starter motor 24 Volt, 18 amps. Battery charging alternator
*Engine instrument control panel consisting of: Engine safety module EMS (KG934) with built in On/Off Bush button.
ALTERNATOR
125KVA, Three phase 415V, 0.8 pf 4 wires 50 hz at 1500 RPM brushless alternator. The voltage regulation will be 2 phase sensing +/¬ 1 %. The alternators shall be of Class H insulation, enclosure IP 23 and are designed built and tested to IS 4722 or any other equivalent Indian or international standards. Control Panel: 320 KVA DG Set Std Control Panel Consisting of EMS KG934 unit consisting Volt, Amps, RPM, Hz, LLOP, HWT, Low fuel level, over Speed alarm, Over Load alarm, Load imbalance safety alarm, etc. Fuel Tank: 300 Letters Capacity inbuilt Fuel Consumption: 100% = 37.6 Litres/hr.75% = 27.6Litres / hr.50% = 19.8Litrs/hr.
Battery: 24V DC, 130AH Supply of AMF Control Panel Suitable for 320 KVA DG set for EB Services with byepass arrangement. (Make: Kirlosker, Koel or equvalent)
-
-
-
LIFT
-
-
-
Supplying, erecting, testing and commissioning of machine room less passenger Elevator having 8 passengers capacity, rated speed 1.0 mtr. / sec., for GF & 1st floor, 400 volt 3 phase, 50 Hz, AC variable voltage variable frequency derive with speed encoding, simplex full collective with / with out attendant, microprocessor based controller located top floor, variable frequency regenerative drive, flat polyurethane coated belts for traction media, stainless steel panels with hairline finish for car and door, gearless with permanent magnet motor located in the shaft top, all openings are located at the front of the hoist way, with centre opening Automatic with ACVVVF door operator with electronic door protective system, stainless steel hairline finish sliding doors, painted frame with down light false ceiling, Stainless Steel mirror finish hand rails, granite flooring of client choice, sixteen segment digital LED display position indicator in all floors, digital car position indicator, over load warning indicator, battery operated alarm bell and emergency light, fireman's switch at main lobby, with automatic rescue device, intercom between lift car and lobby and controller, voice synthesizer, 60 minutes fire rated car door. Car Entrance :- Clear opening
3
-
-
Supplying, erecting, connecting and commissioning 32Amps 4P 30mA RCCB in M S enclosure in an angle iron frame, cable adoptor boxes, interconnections, etc., for lift control. .
3
-
-
Supplying, erecting, connecting and commissioning 32Amps 4P MCB with DOL starter for three phase motor with necessary adopter box, interconnections, etc., for Filteration and Transfer Pumps. .
2
-
-
Supplying, erecting, connecting and commissioning 25Amps 4P MCB with DOL starter for three phase motor with necessary adopter box, interconnections, etc., for Filteration and Transfer Pimps. .
2
-
-
Supplying, erecting, connecting and commissioning 20Amps 4P MCB with DOL starter for three phase motor with necessary adopter box, interconnections, etc., for Filteration and Transfer Pumps. .
2
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 32Amps DP MCB.1 no and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End.
200
-
-
Supply and fixing of 7 segment 8 way 63 A FP MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single /three phase MCB outgoings and separate 4 way provision for accommodating one no. 4 pole incoming 63 A FP MCB, 10kA, and another separate 4 way for accommodating one no. 40 Amps 4 pole MCB/ ELCB / RCD (totally 8 ways in one segment) ( 3x6ways in each segment ) and Seperate Provision for MCB / Isolators (totally 18nos) for sub incomers in 3 segments with label holder and provision for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. i.63A 4Pole MCB - 1no.
ii.32A 2Pole MCB - 3nos.
iii.20A SP MCB - 24nos. ( Data - 3a )
8
-
-
VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB :
Supply and fixing of 6 way vertical TPMCB sheet steel TPMCB DB with IP42 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 2 Nos.of 32A,10KA Triple Pole MCB and..12 Nos. of 6A - 32AMPS SP MCB Outgoing in Flush with wall and making good of the concealed portion with earth connection. (TPMCB DB with IP42 Protections)
2
-
-
VERTICAL THREE PHASE MCB DISTRIBUTION BOARD WITH MCB :
Supply and fixing of 4 way vertical TPMCB sheet steel TPMCB DB with IP42 Protection of surface type fitted with bus bars and neutral links with1 No. of 63A FP MCB as Incoming and 1 No.of 63A,10KA Triple Pole MCB and. 09Nos of 6A to 10A SP MCB for Outgoing in Flush with wall and making good of the concealed portion with earth connection. (TPMCB DB with IP42 Protections)
1
-
-
Supply and laying of following XLPE armoured HT / LTUG cable in a Earth / Trench / Tray with suitable cable tie tag etc as required.
-
-
-
Supply and laying of 3 core x 240 sq.mm. HT XLPE 11KV (UE) PVC armoured HTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
20
-
-
Supply and laying of 31/2 core x 240 Sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
250
-
-
Supply and laying of 31/2 core x 120 Sq.mm PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
600
-
-
Supply and Clamping of 3 1/2C x 50 sq.mm. PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
100
-
-
Supply and Clamping of 3 1/2C x 25 sq.mm. PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
100
-
-
Supply and Clamping of 4C x 16 sq.mm. PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
200
-
-
Supply and Clamping of 4C x 10 sq.mm. PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
50
-
-
Supply and Laying of 4C x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
300
-
-
Supply and fixing of double compression brass cable gland for following Aluminium conductor XLPE insulated armoured cable of 1100 V grade with earth connection.
-
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 240Sq.mm PVC LTUG armoured cable with earth connection
8
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 120Sq.mm PVC LTUG armoured cable with earth connection
20
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection
10
-
-
Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection
14
-
-
Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland suitable for 4C x 10 PVC armoured LTUG cable with earth connection.
130
-
-
Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. HT / LT Cable)
-
-
-
Supply and providing cable end termination of 240-400 sq.mm. 3 core HT Cable Outdoor Terminations 11 KV (UE) - Belted PILC Cables - EPKT 4961
12
-
-
Supply and providing cable end termination of 3 1/2 Core x 240 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
8
-
-
Supply and providing cable end termination of 3 1/2 Core x 120 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
20
-
-
Supply and providing cable end termination of 3 1/2 Core x 50 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
10
-
-
Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.
14
-
-
Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
10
-
-
Supply and providing cable end termination of 4 Cx10 sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete. (MR)
130
-
-
Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable 32mm PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour.
7500
-
-
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End
100
-
-
Supply and fixing of 1no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting, grouting,flushing and making good on the wall. Higher End.
20
-
-
Supply and fixing of 1no.6A/16A two module 5 pin socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections.Scope cover wall cutting, grouting,flushing and making good Cocealed the wall. Higher End
10
-
-
Indoor / Outdoor Light fittings
-
-
-
Supply and fixing of 3Mtr height K-lite Navira pole with Double arm 2 x 50W LED Street light luminaire (IP65). The following specifications are,
System wattage : 100w LED
Integral Driver : constant current Input voltage : 230-240V
Dimensions : 844mm (Length) x 310mm (Height) x 214mm (Width ) Power factor : 0.95
Surge Protection : 6KV Material : Mild steel (MS)
Diffuser : Clear polycarbonate optical cover
Colour Temperature : 5700K
Colour : Grey
( Make : K-Lite, Product Ref: 4448 )
20
-
-
Supply and fixing of 3Mtr height K-lite Navira pole with single arm 1x 50W LED Street light luminaire (IP65). The following specifications are,
System wattage : 50w LED
Integral Driver : constant current Input voltage : 230-240V
Dimensions : 464mm (Length) x 310mm (Height) x 214mm (Width ) Power factor : 0.95
Surge Protection : 6KV Material : Mild steel (MS)
Diffuser : Clear polycarbonate optical cover
Colour Temperature : 5700K
Colour : Grey
( Make : K-Lite, Product Ref: 4448 )
10
-
-
Supply and fixing of 4Mtr height K-lite Navira pole with single arm 1 x 50W LED Street light luminaire (IP65). The following specifications are,
System wattage : 50w LED
Integral Driver : constant current Input voltage : 230-240V
Dimensions : 464mm (Length) x 310mm (Height) x 214mm (Width ) Power factor : 0.95
Surge Protection : 6KV Material : Mild steel (MS)
Diffuser : Clear polycarbonate optical cover
Colour Temperature : 5700K
Colour : Grey. The rate includes necessary foundation etc., complete. ( Make : K-Lite, Product Ref: 4448 )
30
-
-
Supply and fixing of 28 W LED tube light fitting with cool day light made out of CRCA powder coated body, poly methyl meth acrylate (PMMA) diffuser, glare free light, Suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories etc., complete.( Make: Crompton)
400
-
-
Supply and Fixing of 1 x 70watts HPSV gate HPMV light fitting of with necessary weather proof junction boxes, GI brackets, interconnections, etc.,
2
-
-
Supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 2.5 metre down rod with fan clamp, and wiring to the near by point with
1.5 sqmm FRLS, PVC insulated copper wires, including necessary accessories and hardware's as required.
10
-
-
Supply and fixing of 375mm(12")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required.
18
-
-
Supply and fixing of louvers shutter arrangements for 375mm(15")sweep (Heavy duty) AC Exhaust fan complete (Data -15)
18
-
-
EARTHING SYSTEM
-
-
-
Supply and installation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp.
12
-
-
Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included. .
8
-
-
Coil earth to street light poles with No.8 SWG GI wire of 11.5 metres of length in which 10 metres of total length compressed in to a coil of one meter length (75mm to 100mm dia) connected suitable with hexagonal earth bolt of size 8mm in to 25mm welded on the pole at one end with a coil position fixed on the earth.
58
-
-
Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with termination in the earth pits, Panels, Distribution boards and equipments with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive
-
-
-
Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection
50
-
-
Supply and run of 25mm x 6mm GI flat with necessary clamps / supports on wall / floor / ground for earth connection
300
-
-
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
100
-
-
Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
500
-
-
The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements.
The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc, (8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )
-
-
-
600X50mm lader type Tray
1000
-
-
300X50mm Perforated Tray
750
-
-
CCTV
-
-
-
Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR 2nos with 8TB Hard Disk Drive, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output HDMI1 / VGA1 outputs provided HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire /ship / temperature / temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony).
1
-
-
Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:
●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)
● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied
●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,
● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W
● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)
26
-
-
Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR
h) True colour generator
i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote
p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).
1
-
-
Supply and fixing of outdoor 4 x 6 PVC box with 102mm x 77mm x 102mm with all fixing accessories
26
-
-
Supply and Laying of CAT 6 armoured cable in 50mm dia HDPE pipe below the ground complete with all necessary accessories etc.. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)
IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T
IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.
1500
-
-
Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.
52
-
-
Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.
1
-
-
Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000 Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.
2
-
-
Supplying and concealing modular type RJ socket with top pin with suitable with concealed type manufacturer's GI metal back box and modular socket in flush with wall mounted on poly carbonate front plate with socket mounting metal parts, for making good of the concealed portion with suitable colour.
4
-
-
Supply and Fixing of Rack with Accessories -Higher end 4 U Rack with LNS unit and fan extra for the above rack.
2
-
-
Supply and Fixing of Rack with Accessories -Higher end 9 U Rack with LNS unit and fan extra for the above rack.
1
-
-
Supply and Instalatin for 1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2 Hours back up.
1
-
-
Supply, Erection of 6m Length pole with base plate of size 300x300x12mm as per IS-875 with following specification. Pole Outter dia -76.10mm x 3.65mm Thick x 6 meter with foundation Charges.
8
-
-
PA System
-
-
-
Supply, Installation,Testing & commisioning of 30 watts 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:Ahuja AMH402T/Bosch or its equivalent)
10
-
-
Supply, Installation,Testing & commisioning of 480 watts P.A Mixer Amplifier with the output power of 1350 watts maximum, 500watt rms at 10% Thyristor harmonic distortion(THD), 850watt RMS at 5% THD, 800 watts RMS at 2% THD and the power supply AC voltage ranging from 220-240 volt, 50/60 hertz. with the DC input of 48 volt and 1000watts has tone controls of Bass=+- 10 db at 100 hz weighing 42kg with the speaker output of 2Q,4Q.70volt&100volt has power consumption of 1600VA AC &12A DC and 100db output regulation at 1khz no load to full load ratio. The signal to noise ratio is 60db with the imnput channels of 0.8mv/4.7kq,3*Aux 100mv/50kq.The frequency response of 50-15000hz+-3db.(Make:Ahuja SSA 10000 /Bosch or its equivalent)
1
-
-
Supply, fixing & Testing of 10" gooseneck with suitable base incorporates separate bush switches for momentary and dynamic microphone with 600ohm impedence and has 2.5mv/pa sensitivity and frequency response ranging from 50-15000hz with multi tone chime model.(Make:-ACM66 Ahuja/bosch/its equivalent) .
1
-
-
Supply and run of 2core 1.5 Sqmm armoured speaker cable with 25mm PVC pipes on wall, tray and ceiling etc. complete.
1000
-
-
Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310, IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth. .
1
-
-
Safety Accessories
-
-
-
Supply of 5m x 4m Rubber 3mm thick Mat suitable for LT installation confirming to IS
5
-
-
Supply of First Aid Box complete with all First Aid Medicines
4
-
-
Supply of Shock Treatment Chart fixed in glass frame
1
-
-
Supply of 4 Nos. Fire Buckets made out of 40 x 40 x 6mm MS Angle
3
-
-
Supply of Hand Gloves 11KVGrade
1
-
-
Supply of Danger Board as required by the Electrical Authorities
1
-
-
Supply of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms
4
-
-
CEIG Inspection & Service Charges
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements