Chennai Metropolitan Development Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Chennai Metropolitan Development Authority Tender
Civil And Construction
Consultancy Services
Civil And Architectural Services
Eprocure
Opening Date1 Sep 2023
Closing Date20 Sep 2023
Tender Amount₹ 51,82,00,000
Costs
EMD
₹ 26,80,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Chengalpattu Bus Stand
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CMDAC_349950_2Bid Award Id
ViewTender No
Tender Notice No.10/23-24Tender Authority
Chennai Metropolitan Development Authority ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Foundations, Sump, Septic Tank - First Depth Upto 2m
12372
-
-
Foundations, Sump, Septic Tank - Second Depth 2m - 3m
960
-
-
Earth work in narrow excavation for foundation in all type of soils and sub soils to the required depth for trenches, catch basins, collection chambers ,drains etc,. by mechanical means ( JCB / Hydralic rock breaker / Poclain etc.,) including manual excavation in for the following type of soil / rock as per detailed specification and conforming to safety rules during progress of the work as complete with all respects complying with relevant standard specification. Rate to include backfilling, leveling, dressing of sides and ramming of bottom with all leads and lifts, transportation including getting out the excavated soil and disposal of surplus excavated soil within the construction site and inside the building plinth level including necessary compaction in layers of 150mm thick each complete as directed and dressing to proper level and graded as required etc, loading, unloading, plant and machinery, hire and fuel charges for tools and plants, shoring, strutting required to keep the earth in position and baling out water, dewatering of all ground, surface and rain water, removal of slurry generated while excavation and keeping the area free from water, removal of loose pockets, slips and falls during excavation and compacting the same, Slinging or supporting pipes, electric cables, royalties, Seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
1929
-
-
Carting away surplus excavated earth available with in the campus is to be carted to a lead of within 5 KM from site. The rate shall include loading into the tipper/ lorry, transporting and unloading, leveling and the earth scooped by bulldozers grading etc.,complete with all respects complying with relevant standard specification, as directed by the Departmental Officers. Rate to include materials, loading, unloading, transportation, plant and machinery, hire and fuel charges for tools and plants and other incidental charges, royalties, seignorage and taking statutory approvals as necessary to carry out the work as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
15201
-
-
Supplying and Filling with M - sand in foundation and others sub structures for 100mm thick and well watered, rammed and consolidated by power compacter. The rate includes the cost of M sand, compacting with mechanical compactors, labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.
3750
-
-
Refilling with excavated earth in layers of not more than 15 cm thick well rammed, watered and consolidated .The rate includes cost of refilling,consolidation with power compactor labour charges for leveling, loading & Unloading and Transportation charges etc., complete and as per the standard specification.
7994
-
-
Supplying and filling of Gravel / Good Earth by lorry in Foundation basement filling and site filling with approved materials excavation from approved quarries and compacted to meet requirement of table 300-1, 300-2 of MORTH, in layers not exceeding 250 mm loose thickness, spreading, breaking clods, removal of roots and other organic materials to the required line, grade and cross-section including watering, spreading by Dozer, grading by motor grader and consolidation by vibratory road roller with desired field density not less than 95% of maximum dry density ,including all lead,lift, loading, unloading, all labour, hire charges of all machineries, Transportation, etc., complete in accordance with MORTH technical specification clause No. 305 and with all other incidental charges and as per the direction of the Engineer-In-Charge.
108405
-
-
Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., Stage:1 Spraying Anti-termite treatment chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.
Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth.
Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.
Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12" to a depth of 8" around the building before laying the plinth projection. This holes has to be be closed after the treatment.
3977
-
-
Providing and laying plain cement concrete 1 : 4 : 8 ratio of (1 cement , 4 sand and 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc. The rate includes the cost of materials, labour charges, lifting charges, loading & Unloading and Transportation etc., complete and as per the standard specification.
2330
-
-
Construction of Granular sub-base of 125mm compacted thickness ( Drainage Layer botom most) by providing laying, spreading and compacting of Open graded Material conforming to Grading III of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.
1508
-
-
Construction of Granular sub-base of 125mm compacted thickness by providing laying, spreading and compacting of Close graded Material conforming to Grading V of Table 400-1 of MORTH clause 401 ,mixing in a Wet Mix Plant of 200 tonne capacity at OMC, carriage of mixed material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory roller 8-10 tonne to achieve the desired density of 98% including protection of edges of GSB layer, cost of all materials, labour, hire charges of machinery, lighting, guarding, barricading, maintenance of diversion road, loading & unloading, all lead and lift etc., to achieve minimum CBR value of 30%(Compacted Thickness) in accordance with MORT&H technical specification clause No. 401 and with all other incidental charges and as per the direction of the Engineer-In-Charge of work.
1508
-
-
Construction of Wet Mix Macadam 250mm compacted thickness in two layers by providing , laying , Paving , and compacting of aggregate gradation satisfying to Table 400-13 of MORTH and satisfying the physical paraeteres as per MORTH Table 400-12, mixing in a Wet Mix Plant of 200 tonne capacity at OMC , carriage of mied material to work site and laid in sensor pavers to the required line and grade as per the drawing and compacted with vibratory roller of 8-10 tonne to achieve the desired density of 98% of Maximum dry density and as per the direction of the Engineer-In-Charge of work.
2967
-
-
Providing and construction of Dry Lean Concrete Base course of 150 mm compacted thickness over a prepared sub base with coarse and fine aggregate conforming to IS 383 as per table 600-1 of MORTH specification produced in a batching plant and conveyed in tippers to the laying site with a moisture content as per the design mix and laid with mechanised paver finisher and compacted with a 8-10 tonne vibratory roller to the requisite grade and levels as specified in drawings with adequate curing by covering the surface with hessen cloth and keeping it wet for 7 days. The design mix shall be such that the average compressive strength of each consequetive group of 5 concrete cubes shall not be less than 7Mpa at 7 days. In addition the compressive strength of any individual concrete cube shall not be less tha 5.5 Mpa at 7 days. The concrete mix shall be proportioned with a maximum aggregate cement ratio of 14:1 where OPC is used and 12:1 where PPC or PSC is used. The minimum cement content shall not be less than 140 Kg/Cum of concrete. The rate shall include for all incidentals as specified in clause 601.12 of MORTH
2600
-
-
Supplying and erecting centering for sides and soffits including supports and strutting up to 3.30 m height with all cross bracing for plane surfaces as detailed below, using mild steel sheets of 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., the rate including cost of all materials, labour charges, wastages, placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
-
-
-
For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.
5406
-
-
For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
12449
-
-
For plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.
5480
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.
11940
-
-
Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Footings, Grade beam, retainning wall drain wall & raft , Plinth beams, Column, Grade slab, Roof slab & beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items. in-charge The rate including cost of all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, gunny bags for curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge
-
-
-
Footing and grade beam
3473
-
-
Ground Floor
2732
-
-
First Floor
931
-
-
Terrace Floor
100
-
-
Providing and Construction of M40 Grade Pavement Quality Concrete of 280mm thickness including dowel joints over a prepared Base Course of PCC layer with 53 grade of cement, coarse and fine aggregate conforming to IS 383, coarse aggregate 25 mm & 12.5 mm Granite/Basalt/Trap metal & clean seived approved sand conforming to the gradation asspecified in Table 600-3 of MORTH clause 602., loading materials to cement conrete batch mix plant of adequate capacity ( normaly 25% more capacity than the paving equipment preferably 120 Cum/hour ) as per approved mix design satisfying the characteristic flextural strength of not less than 4.2 Mpa. The mix shall be transported to site in transit truck /tippers/ dumpers of 5-6 Cum capacity, laid with a slip form paver with electronic sensor fitted with vibrators shich shall operate at a frequency of 8000-10000 impulses per minute under load with a maximum spacing of 600mm and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, fixing of Dowel bars and Longitudinal tie bars ,joint filler, separation membrane, sealant primer, joint sealant, debonding strip, curing compound as approved, finishing with power trowel to the required grade, level and alignment, textured with texturing machine, finishing etc.,
-
-
-
making groove cutting for construction joint of size (4 x 10mm) and filling the same with polyurethene sealent, making groove cutting for expansion joint of size (8 x 10mm) and filling the same with polyurethene sealent, providing Isolation joint of 20mm wide to the full depth of the concrete and fixing with isolation pad of 20mm thick and sealing the top with polyurethene sealent to the size of 20 x 20mm and curing (curing shall be as per clause 602.9.12 of MORTH) including cost of all materials, labour, lead and lift, hire charges of machineries , including the initial saw cut and filling of Polysulphide/Polyurethene sealants in contraction, expansion joints etc., complete in accordance with MORT&H technical specification clause No. 602 and with all other incidental charges inclding the trial length and as per the direction of the Engineer-In-Charge of work. (Reinforcement and Dowel bars shall be paid under relevant item)
4825
-
-
Supplying, fabricating and fixing in position of steel Fe 550 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete cover blocks to maintain the cover as required. The rate including cost of all materials, bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks and GI binding wires etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
1605
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge
-
-
-
Basement
358
-
-
Ground Floor
1091
-
-
First Floor
581
-
-
Terrace Floor
307
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used. The rate including cost of all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
-
-
-
Ground Floor
301
-
-
First Floor
321
-
-
Plastering 10 mm thick for ceiling including slabs, beams and column drops and staircase waist slab, sunshade, drops, chajjas etc..with Cement Mortar 1:3 (1 of cement : 3 of fine P.sand) according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
9505
-
-
Plastering of 12 mm thick for Internal walls with cement mortar 1:5 (1 of cement : 5 of fine P.sand) according to specifications. Rate shall include for providing GI mesh of nominal thickness at the junctions of masonry and concrete works to a width of 100 to 125mm including tying in position with suitable clamps/screws. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
28981
-
-
Plastering 15 mm thick for external surfaces with cement mortar 1:5 ratio (1 of cement : 5 of fine P.sand) including water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed.
Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
4645
-
-
Supply and Laying with best quality approved Kotah stone slab not less than 20 mm thick and the size of slab in general not less than 600 x 600 mm machine cut and machine high pre-polished, set in C.M 1:3 (1 of cement : 3 of manufactured sand ), 20 mm thick topped with white cement slurry (for surface contact of the bottom of the Kotah slab) as per approved pattern/design as per drawing by using irrespective of size and shape, including finishing the joints with white cement slurry, cutting, edge chamfering and polishing rough, medium, nice and acid wash and tin-oxide polish. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
16900
-
-
Supply and Laying 100 mm high skirting with best quality approved Kotah slab of thickness not less than 20 mm, machine cut and machine high pre-polished set in set in cment mortar 1:3(1 of Cement : 3 of manufactured sand) 12 mm thick . Rate shall include for preparation of surface, with tin-oxide / high gloss factory polish. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, filleting/ chamfering of the edges along with partial recessing of the skirting into masonry, preparation of surface, ncessary haccking in RCC surface, cutting of tiles to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over Plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
5600
-
-
Supplying and fixing Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
3672
-
-
Supplying and laying of Ceramic tiles of size 305 x 305 x 6mm for flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. The rate including cost of all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
520
-
-
Foamed PVC Door frame : Specification: Providing factory made Pre Laminated FPVC Door Frame of the size 105 X 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre jointed with 6nos of 5mm long screw. The door frame shall be fixed to the wall by using 80 mm long screws through the frame with the help of PVC Fasteners of 3 nos. to be provided for each vertical member, GI stiffners of ( U channel of size 29 X 9, 1mm, 150mm long) - 3 Nos at hinge point, Frame Reinforcement of (U' GI channel of size 46 X 22 X 0.6mm), bottom tie rod of ('U' GI channel Size of 15 X 15 X 1mm ), etc., Complete complying with the standard Specification. the door frame should be got approved from the Executive Engineer before use on work
Providing of 35mm thick factory made pre - laminated ABS ( Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs consisting of all round frame made out of water proof solid PVC bar of size 20 X 32 mm reinforced by 32 X 32 mm 2 nos ., for vertical made out of LVL core material of 32 mm thick high density craft paper honey comb board, sandwiched on both sides with pre- laminated ABS sheets thickness of 1.5mm PVC edge bending of size 0.45mm on the vertical sides. hardware made out of steels coated butterfly hinges - 3nos for each shutter and ISI make SS round lock Complete complying with the standard Specification the door shutter and frame should be got approved from the Departmental Engineer before on use
-
-
-
2000 X 2400 mm
91
-
-
1500 X 2400 mm
40
-
-
1200 X 2400 mm
163
-
-
1000 X 2400 mm
17
-
-
750 X 2100 mm
134
-
-
Rolling Shutter Manual Operation
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths of size 80 x 1.20 mm interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation to the suitable size and shape as per drawing etc complete including the cost of providing and fixing necessary 27.5 cm long good quality wire springs grade No.2 and M.S. top cover of 1.20 mm thick for rolling shutters. The rate shall be inclusive of one coat of red oxide primer and two coats of synthetic enamel paint of approved quality and colour.
Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, installation charges, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
RS1 - Rolling Shutter - / 3000 mm x 2100 mm
265
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable
action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing
with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
259
-
-
UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on wor
15
-
-
Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Engineer-in-charge.
4750
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)
750
-
-
Painting the Ceiling with Two coats of first quality Plastic Emulsion paint of approved colour over one coat of primer including thorough scraping, clean removal of dirt. The rate includes cost of materials, brushes, sand paper, rollers, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use)
9505
-
-
Supply and painting of two coats of Plastic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.
Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Internal surface)
28981
-
-
Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
4645
-
-
Supplying and laying precast Rubber Moulded hydraulically pressed cement concrete paver block with pattern design of 50% colour and 50% Plain made of M40 grade concrete - 83 mm thick of approved quality and colour, over the filling manufactured sand to 50 mm thick, levelling and compacting with plate vibrator and laying of the inter locking paving blocks with sand binding and final compaction with plate vibrator of 3 tonne capacity finishing the surface including cutting of blocks at the edges including all labour, materials, transportation, shifting etc., complete, as directed by the Engineer-in-charge.
960
-
-
Providing guildeline road marking kerb painting (special acrylic medium pigmented ) involving cleaning the surface free of dirt and loose particles applying one coat of primer and applying one layer of 20 to 25 microns. Rate shall include for all materials & labour components etc., as complete all respects complying with relevant IRC specifications, as directed by the Engineer-in-charge.
955
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
144
-
-
"Supplying and filling the sunken slab area by BRICK-BATCOBA by adding CICO NO:1 or approved equivalent admixture including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with water proofing compound like CICO No.1 at the rate specified in the manufacturer's specification after entire completion of laying pipes, sanitary fittings etc. Rate including all materials, labour charges, wastages with necessary lead and lifts, working at all levels, protecting the laid pipes and sanitary fittings, finishing the surface smooth to receive the top coat of water proofing application etc. as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge."
i) Including applying two coats not less than 2 mm thick of TAPECRETE- Acrylic Polymer Based Waterproof Coating, over the plastered surface as including final coat of cement plaster 12 mm thick with cement sand mortar 1:3 mixed with approved water proofing compound like CICO No.1 or approved equivalent conforming to IS 2645 at the rate specified by the manufacturer over coated surfacepreparation of surface, finishing, curing etc. all complete at all levels as per manufacturer's specifications and as directed by the departmental Engineer-in-charge.
577
-
-
"TERRACE WATERPROOFING:
Supply and laying water proofing treatment for terrace covering the following order and consisting of following operations."
i) Making ' V ' grooves at the construction joints of size 20 x 20 mm and filling the "V" Groove with CICO No. 3 Quick Setting Waterproofing Compound admixed with cement.
The roof slab / gutter slab shall be thoroughly cleaned to remove debris and dust, and applying 2 coats not less than 2 mm of polymer based Elastomeric Coating like TAPECRETE - RTU compound and cured for 7 days and followed by a layer of 20 mm thick cement mortar 1:3 admixed with CICO NO:1 (or) other approved equivalent make shall be spread over the prepared surface
On the spread mortar provide and lay well burnt brick bats (COBA) to a average minimum thickness of 55 mm (i.e.. minimum 40 mm thickness at lower end and 70 mm thickness at higher end). An additional layer of brick bat (COBA) shall be laid over the existing brick bat COBA surface if required to get the required gradient for adequate drainage giving a slope of approximately 1 in 120, which will be measured separately under relevant item.
-
-
-
The gap between brick bat shall be filled with cement mortar 1:4 admixed with waterproofing compound like CICO NO:1 or approved equivalent afterwards curing shall be carried out for two days a final layer of cement mortar of 1:3 admixed with water proofing compound like CICO NO:1 or approved equivalent make shall be laid to a thickness of 20 mm and draw a false line of 300 mm x 300 mm.
The parapet side wall / gutter wall shall be thoroughly cleaned to remove all dust particles and a layer of 15 mm thick C.M 1:3 shall be laid to a height of about 300 mm above the top of the terrace/Gutter slab on the Parapet / Gutter side wall admixed with water proofing compound like the CICO NO:1 or approved equivalent make. Providing, supplying, mixing, applying two coats of ready to use two component Acrylic polymer modified cement based, flexible, water proofing slurry like or approved equivalent to a thickness of 2 mm over the plastered surface of operation as per manufacturer's specification and as directed.(Plan area of Terrace only will be measured for payment )
3447
-
-
Providing and laying water proofing treatment to vertical and surfaces for sunken portion of depressed portions of W.C., and the like consisting of :i) Ist course of applying cement slurry @ 4.4 Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontalsurface. ii) IInd course of 20mm cement plaster 1:2 (1 cement : 2 coarse sand)mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area. iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.)
232
-
-
Supply & installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm +/- 5% total coated thickness (TCT) thick Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15- 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
6264
-
-
Supply, fabrication and erection of Structural Steel members for installation of Steel Truss including enamel painting complete and the same shall comply to All primary steel member such as column and rafter conform to grade E-350 as per is 2062. All cold form steel members such as purlin shall conform to grade E-350 as per is 811. Steel members such as bracings, angles, conform to grade E-250 as per is 2062. All secondary structural steel plates such as base plates, end plates, shall conform to grade E-350 (FE 490) as per is 2062.
125
-
-
Fixed Glass Partitions - frameless partition glazing consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make single leg spider, ceiling/bottom to glass connector, glass to glass connector, etc, all the necessary fittings upto all height including scaffolding all complete as shown in attached drawing as per the direction of Engineer-in-charge.
412
-
-
Fixed Glass Doors - frameless patch fitting door consisting of 12mm clear toughened glass ( Saint gobain/ Modi make) and fixing with Dorma/Ozone make floor spring, top patch, pivot, bottom patch, corner lock, H type handle ( standard) & etc., complete. The rate including cost of all materials, necessary fittings upto all height, scaffolding, labour charges, loading, unloading and transportation charges etc., complete as showing the drawing with relevent standard specification and as directed by the departmental Engineer-in-charge.
22
-
-
Plain Cement Concrete 1:2:4 (One Cement two M-sand and four aggregate) using 20mm hard broken granite stone jelly for foundation including dewatering and wherever necessary laying in layers of 15cm thick and consolidated and curing complying with standard specification and as directed by the departmental officers etc., complete.
173
-
-
Providing, cutting and fixing desired 50 mm thickness of expansion joint filler Dura Board HD-100 (closed cell, compressible ,pre-molded Polymer joint filler board ) in black color Manufactured by Supreme Industries Limited Conforming IS Standard IS 1838 (Part-3) Having density of 95kg /Cu. Mt. Non-Staining with less than 1% water absorption & Compression recovery of 93 % minimum as per specifications. Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, scaffolding etc., complete with relevent standard specification and as directed by the departmental Engineer-in-charge.
300
-
-
PLUMBING WORKS
-
-
-
Supplying & fixing in position 15 mm dia brass/ C.P screw down tape (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).
-
-
-
C.P Tap
59
-
-
15mm dia CP Pillar Tap
15
-
-
Constructing solid block masonry manhole various size of deep in cement mortar 1:3( 1 Cement: 3 M.sand ) R.C.C. Raft & top slab with cement concrete 1:2:4, plain cement concrete 1:4:8 mix for base course (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size )above that 150 mm thick RCC M25 raft slab inculding reinforcement 10mm dia 150mm c/c bothways. Plastering inside walls with 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ), finished with a floating coat of neat cement ,supplying and fixing SFRC manhole cover with farame of size 600x600 mm , PVC foot rest as per detailed drawing etc the quoted rate shall also necessary excavation and back filling etc complete.complete as per standard design : (the chamber and cover should be got approved by the Executive Engineer before use on works)
-
-
-
Manhole 600 x 600 mm internal size ( Depth up to 1000mm)
11
-
-
Manhole 900x900x1000-1400 mm Size
9
-
-
Manhole 900x900x1500-2400 mm Size
11
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Internal & External
-
-
-
200mm Dia
492
-
-
160mm Dia
1204
-
-
110mm Dia
484
-
-
75mm Dia
561
-
-
50mm dia
120
-
-
40mm dia
150
-
-
Supplying and fixing PVC cowl of following size to vertical Soil/Waste pipes above terrace level. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.
-
-
-
110mm dia
15
-
-
75mm dia
16
-
-
Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three M sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).
118
-
-
Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron double gratings of size 150 X 150 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).
14
-
-
Making through holes in Plain or Reinforced Cement Concrete with Diamond Core Drilling System by using BOSCH power tools of following diameter in 150mm thick toilet floor slab
-
-
-
100mm dia 150mm thick
118
-
-
200mm dia 150mm thick
70
-
-
300mm dia 150mm thick
10
-
-
200mm dia 300mm thick
10
-
-
Supplying and fixing Lipped Mouth Porcelain Flat Back Urinal(white colour) of size 26.5x31.5x44cm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge.
42
-
-
Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)
15
-
-
Supplying and fixing Wash Hand Basin of size 550 x 400mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. (The Wash basin should be got approved by the Executive Engineer before use on works.
58
-
-
Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trap with double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.
55
-
-
Supplying and fixing heavy duty 15mm CP shower unit comprising of CP 15mm dia hot & cold mixer with CP spout, overhead shower set comprising of CP shower arm, rose etc.,complete with CP wall flanges. The rate including cost of all materials, labour charges and transportation etc. completed as directed by Engineer-in-Charge.
17
-
-
Supplying, Installing, Testing and Commisioning the best quality approved make of white glazed floor mounted european water closet with inbuild porcelin cistern 6/3 LPF and wash basin for physically challenge persons (hindware -matrix -70002)with necessary grap railes,hinged railes for support,pan connector bend ,checknut,stopcock etc,. colour solid seat and cover with polythene buffer and flap,CP flanges, CP bolts and nuts,brackets with nuts and boults wall flanges etc, complete ,wash basin shall include 15mm dia CP lever oprareted piller cock with waste coupling , 32mm dia CP bottle trap with extension pipe,supporting bracket with neccesary steel to support the basin 1 No,15mm CP angle valve with 450mm long CP connection pipe and CP wall flanges all of approved make etc., complete complying with standard specification and as directed by the department officers.the quality and mak of EWC & wash basin with full set should be got approved by the Executive Engineer before use on work.
4
-
-
Supplying and fixing Brass Chromium Plated Towel Rail 60cm long and 20mm dia with brackets of same materials including cost of teak wood plug & CP screws etc., complying with standard specification and as directed by the Department officers.
17
-
-
Supplying and fixing Brass Chromium Plated Soap Tray of size 150mm x 100mm using rawl plug & brass screws for fixing etc., complete complying with standard specification and as directed by the Engineer Incharge before use on work.
17
-
-
Supplying and fixing CP angle cock with wall flange including cutting and making good the walls wherever required etc., complete complying with standard specification and as directed by the Engineer Incharge before use on work.
120
-
-
Supplying and fixing in position Mirror of size 1000x780mm of approved quality and brand with necessary plastic back PVC frame with bottom stand using brass screws rawl plugs for fixing etc complete complying with standard specification and as directed by the Departmental officers. The colour of frame and quality of mirror should be got approved by the Executive Engineer before use on work
12
-
-
Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal & Vertical
-
-
-
20 mm Dia Cpvc Pipe
1190
-
-
25 mm Dia Cpvc Pipe
600
-
-
32 mm Dia Cpvc Pipe
1215
-
-
40 mm Dia Cpvc Pipe
180
-
-
50 mm Dia Cpvc Pipe
280
-
-
65 mm Dia Cpvc Pipe
850
-
-
80 mm Dia Cpvc Pipe
70
-
-
Supplying, laying, jointing, testing & Commissioning of UPVC Schedule 80 pressure pipes as per ASTM D 1785 with Sch 80 Fittings as per specifications, jointing with hold tite / super tite & tefflon tape and complete with fittings such as sockets, unions, reducers long or short bends, elbows, nipples flanges,checknuts,etc. Pressure testing of piping and back filling of trench complete as required. The quoted rate shall include necessary earth works, fittings like Tees, Bends, Offsets etc., G.I. brackets with pvc coated GI clamps, nuts & bolts, anchor fasteners, grip bolts, GI threaded, rods, etc., complete for external pipes. (For under ground or above ground external water supply piping.) Vertical & External including landscape
-
-
-
20 mm Dia Upvc Pipe
120
-
-
50 mm Dia Upvc Pipe
1200
-
-
65 mm Dia Upvc Pipe
60
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
20 mm Dia
10
-
-
25 mm Dia
21
-
-
32 mm Dia
32
-
-
40 mm Dia
3
-
-
50 mm Dia
2
-
-
65 mm Dia
4
-
-
80 mm Dia
3
-
-
Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge..(DWS OHT Transfer pump&Flushing water OHT transfer pump)
6
-
-
Supply, Installation, testing and commissioning of 3HP irrigation water pump from STP with electric control panel with starter, logic controller relays, pressure switch, pressure transmitter, electrical wiring, cabling with cable tray as specified from panel to pumps, level controller complete with all accessories as per manufacturer specifications. Accessories like ball valves, butterfly valves, non return valves, pressure gauges and dead end flanges on suction and discharge headers complete as required.(Submersible type pump) Price shall include with required float control arrangment.2 nos. (1working + 1 standby) vertical in line, multistage, centrifugal pumps complete in S.S. coupled with TEFC motor
2
-
-
Drilling of 12" dia vertical borewell so as to have a finished size of 6" dia borewell in boulder area to any required depth as decided by the TWAD Board Officers including Transportation from one place to anothr place with in Tamilnadu State by direct or reverse rotary mud circulation method using Contractor's rig tools, fuel, labourers, bentonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit etc. using only calyx rigs.
-
-
-
300mm
150
-
-
150mm
350
-
-
Reaming from 200mm dia pilot bore upto 350mm dia bore as direct by the Engineer incharge up to 80mtr depth ending below ground level.
500
-
-
Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992
-
-
-
200mm dia CS
60
-
-
200mm dia RS
90
-
-
150mm dia RS
350
-
-
Labour charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete, supply and packing the annular space with pebbles of size and quality as approved by the Executive Engineer of Departmental officers. ( As per S.item no: 13a i,ii, p.no: 304)
-
-
-
200mm dia CS
60
-
-
200mm dia RS
90
-
-
150mm dia RS
350
-
-
Supplying and filling with river pebbles in annular space between bore and PVC pipe up to hard rock.
5
-
-
Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by 'V' notch method.
40
-
-
Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.
5
-
-
Supplying and fixing Ductile Iron manhole cover with frame as per approved make ,cover weight and being size mentioned below and specified size in the drawing etc., including painting with two coats of anticorrosive paint over a coat of primer etc., fixing locking arrangements, fixing Man-hole over, grouting the anchors with CC 1:2:4 (one cement, two fine aggregate and four coarse aggregate), as complete in all respects complying with relevant standard specifications and as directed by the Client / Engineer-in-charge.
24
-
-
Fabricating and fixing of Puddle flanges in water tanks with making in G.I 'C' Class pipe with Hot Dip Galvanizing 6mm thick plate alround 3" / 6" with proper thread on the pipes and necessary flanges for bigger diameter pipes, etc. complete. (the puddle flanges sholud be got approved by the Executive Engineer before use on works) The rate including cost of all materials, Fixing charges, Labour charges and Transportation charges etc., complete with standard specification and as directed by the departmental engineer-in-charge.
-
-
-
100mm G.I Puddle Flange
9
-
-
80mm G.I Puddle Flange
6
-
-
65mm G.I Puddle Flange
14
-
-
50mm G.I Puddle Flange
18
-
-
40mm G.I Puddle Flange
2
-
-
Design, supply, installation, testing and commissioning of 50 KLD Sewage treatment plant (STP) with MBBR technology
-
-
-
FBBR system: bar screen chamber, grit chamber, primary collection-equalization tank, raw sewage transfer pump set with standby, aeration tank - MBBR reactor, air blowers, motor for blower, tube settling tank, sludge pump set with standby, sludge holding tank, sludge drying beds, processed sewage collection tank - filter feed tank, filter feed pump set with standby, pressure sand filter, activated carbon filter, treated sewage collection tank and electrical panel board etc., complete. (the STP sholud be got approved by the Executive Engineer before use on works). The rate excluding civil works and including cost of all materials, errection charges, labourcharges, loading and unloading charges, Transportation chargse etc., complete with relevent standard specificaion and as directed by the departmental Engineer-in-charge.
1
-
-
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc., complete. The rate excluding civil works and including cost of all materials, Installation and trial run, labourcharges, loading and unloading charges, Transportation chargse etc., complete with relevent standard specificaion and as directed by the departmental Engineer-in-charge.
-
-
-
1000 Litres
1
-
-
Supply, installation, testing and commissioning of water treatment plant of capacity 50000 LPH, which contains Pressure Sand filter, carbon filter and chlorination system with required pumps including stand by pumps and necessary accessories as required. The rate excluding civil works and including cost of all materials, Installation and trial run, labourcharges, loading and unloading charges, Transportation chargse etc., complete with relevent standard specificaion and as directed by the departmental Engineer-in-charge.
1
-
-
Supply, installation, testing and commissioning of 10 KLD capacity Effluent treatment plant (ETP) with raw collection pumping motors, filters, bar screen, with required pumps including stand by pumps and necessary accessories as required. The rate excluding civil works and including cost of all materials, Installation and trial run, labourcharges, loading and unloading charges, Transportation chargse etc., complete with relevent standard specificaion and as directed by the departmental Engineer-in-charge.
1
-
-
ELECTRICAL WORKS
-
-
-
11kV HT RMG Panel Supply, Installation, Testing and Commissioning of outdoor type RMU, 350 MVA 630 Amps two nos. incoming isolator, and 350 MVA, 630 Amps VCB - one no. as out going and with all accessories complete as required with following:-
-
-
-
Protection Relay : 50,51, 50N, 51N, 86, 94
Manually charged spring closing mechanism
Set of mechanical close / trip knobs
Mechanical On / Off Indicator
Mechanical spring charged / Free Indicator
2-5 A overload trips shunt with time limit fuses calibrated for 75-150 % and shunted by time limit fuse
3 Nos Cast resign current transformer with secondary ratio of 30 /5 A, class 0.2S /5P20, 15 VA burden rating for protection and metering. Breaker shall have all protective and auxiliary relays with alarm annunciation
Provision for mounting sealing kit suitable for HT XLPE cables
11kV Class 630 Amps incoming Isolator - 2 nos. and 630 Amps - 1 no. VCB outgoing feeders.
Notes : 11 KV Metering Cubicle as per MRTS/ TANGEDCO Specifications and obtaining approval from MRTS/ TANGEDCO
1. G.A drawings to be got approved from CEIG.
2.Tenderer is advised to seek guidance of supplier of RMU/HTVCB PANEL for installation, testing & commissioning.
3. Use of crane for assembly of transformer is included in the scope of tender.
4. Co-ordination with electrical inspector and subsequent approvals are included in the scope of the tender.
1
-
-
11kV HT Out Door Panel Supply, Installation, Testing and Commissioning of 11 KV, 25 KA, 630 A, HT Outdoor Three Panel Vaccum Circuit Breaker complete as per specification. as incoming and out going with all accessories complete as required with following:-
-
-
-
Protection Relay : 27, 50,51, 50N, 51N, 59,81,86,94
Manually charged spring closing mechanism
Set of mechanical close / trip knobs
Mechanical On / Off Indicator
Mechanical spring charged / Free Indicator
2-5 A overload trips shunt with time limit fuses calibrated for 75-150 % and shunted by time limit fuse
1 No Operation counter
3 Nos Cast resign current transformer with secondary ratio of 30 / 5 A for incomer class 0.5 / 5P20, 15 VA burden rating for protection and metering. Breaker shall have all protective and auxiliary relays with alarm annunciation
Potential transformer 11000/110V, 100 VA, for class 0.5 for metering and class 3P for protection
Provision for mounting sealing kit suitable for HT XLPE cables
11kV Class 630 Amps, 350 MVA VCB Draw out Type Built in DC power supply pack of 1000VA UPS capacity
1
-
-
Supply and laying of 3 core 240 Sq.mm Aluminium, 11 kV(E), XLPE insulated, Armoured, UG cable on surface / cable trench using clamps in Trench / cable tray including all accessories, hardware etc., as directed by the Departmental Officers.
125
-
-
Supply and Making outdoor Cable End Joint, Including Lugs & other joint Materials of 11KV grade Aluminium, (E),XLPE Armoured,240-300 sq.mm. 3 core HT Cable Outdoor terminations
XLPE 11KV (E) - EPKT 3372
8
-
-
Supply and Making Indoor Cable End Joint, Including Lugs & other joint Materials of 11KV grade Aluminium, (E),XLPE Armoured, 240-300 sq.mm. 3 core HT Cable Indoor terminations
XLPE 11KV (E) - EPKT 3121
2
-
-
500 KVA TRANSFORMER
Supply, Installation, Testing and Commissioning of 11/0.433, kV 500 KVA copper wound, outdoor distribution transformer, ONAN, DYn11, with On load tap changer range from +5 % to –15% @ 1.25% with 16 steps / 17 positions, RTCC Panel, first filling of oil, with suitable cable box for HT side termination and Bus duct / cable termination in LT side termination, including transportation, unloading at site, including etc., all inclusive.
-
-
-
Transformer should have following accessories:-
Rating and terminal marking plate - 1 No. Earthing terminals Lifting lugs – 2 Nos.
Thermometer pockets - 1 No. Bi-directional rollers – 4 Nos. Air Release Device - 1 No. Bottom channels - 1 Set Drain valve with plug at Bottom - 1 No.
Filter valve with plug at top - 1 No. Oil conservator with drain plug - 1 No.
Oil filling hole with cap in Conservator - 1 No.
Plain oil level gauge - 1 No. Dehydrating silica gel breather - 1 No.
Explosion vent with diaphragm - 1 No.
Oil temperature Indicator with A/T contacts Winding temperature indicator with A/T contacts
Buchholz Relay with A/T contacts and with 1 No. Shut-off valves.
Magnetic oil level gauge with Alarm Contact only.
Marshalling Box
-
-
-
RTCC panel 1. G.A drawings to be got approved from CEIG.
2. Tenderer is advised to seek guidance of supplier of transformer for installation, testing & commissioning.
3. Use of crane for assembly of transformer is included in the scope of tender.
4. Co-ordination with electrical inspector and subsequent approvals are included in the scope of the tender.
5. Routine tests & acceptance test on transformer shall be performed in presence of departmental engineers as per relevant IS/BS/IE specifications at works before despatch . Type test certificate as indicated in the specification shall be submitted before commencement of routine test of transformers for records. Supply,laying ,testing and commissioning of 24 Core 2.5 sqmm Copper,XLPE Insulated, armoured Control Cable from RTCC to OLTC/Transformer Marshalling box on wall/ceiling/ cable tray / masonry duct/pipes with suitable MS Clamps wherever required as per specification.(inclusive terminations)
2
-
-
MV PANEL
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, Floor mounted, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type, dust and vermin proof, hinged lockable doors, with base frame, Digital multi functional meter, volt meter and Ammeter with selector switch, auto / manual selector switch, supplied with inbuilt UV and shunt trip (220 V AC). Two sets of NO/NC potential free contact shall be provided for remote monitorthrough BMS. close / trip switch, cluster LED type indicators, in the incoming feeders, complete with electrolytic grade Copper Bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting M.S Channels, fasteners, etc., including all associated control wiring and mechanical / Electrical interlocking circuitry, CT of adequate ratio for APFC panel, etc., all inclusive. The ACB is of Draw out type with electrically spring charge mechanism, fault protection and trip settings, remote trip facility where as the MCCB is of micro process based trip relay - with short circuit and overload protection with remote trip facility. The Panel Shall be IBMS Compatible. The panel details as follows:-
-
-
-
EB INCOMER : 1000 A, 4P 50 kA, ACB - 1 No
ELR relay with variable trip selection with CBCT of adequate size capacity for EB incomers.
SOLAR INCOMER : 400 A, FP MCCB 50 kA, - 1 Nos
Each Incomer Shall have 1 no. Digital type multi function meter with RS Port and connected with adequate CT
DG INCOMER : 400 A, FP MCCB 50 kA, - 2 Nos
Each Incomer Shall have 1 no. Digital type multi function meter with RS Port and connected with adequate CT
Bus coupler FOR EB 1000 A, 4P 50 kA, ACB - 1 No
Protection Relay for DG
27, 50,51,50N,51N, 59, 86, 94 - 2 No
Outgoing
400 A, TPN MCCB 50 kA, - 3 Nos
250 A TPN MCCB 50 kA, - 12 Nos
160 A TPN MCCB 50 kA, -3 Nos
125 A TPN MCCB 50 kA, -2 Nos
1
-
-
SHOP PANEL
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type and dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring.Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS. complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. Please note that the panel shall be IBMS Compatible. The panel details as follows:-
-
-
-
Incoming
250 A, TPN MCCB 36 kA, 1 No, thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
40A, DP MCB 10 kA, - 18 Nos, thermal magneic trip relay - with short circuit and overload protection Metering for all feeders with suitable CT & protections
2
-
-
UTILITY POWER PANEL Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitor through BMS. complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. Please note that the panel shall be IBMS Compatible. The panel details as follows:- Incoming
250A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
125A, TPN MCCB 25 kA,- 1 Nos thermal magneic trip relay - with short circuit and overload protection 63A, TPN MCCB 25 kA,- 7 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
FIRE PANEL
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitor through BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
250A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
200A, TPN MCCB 25 kA,- 2 Nos thermal magneic trip relay - with short circuit and overload protection 125A, TPN MCCB 25 kA,- 1 Nos thermal magneic trip relay - with short circuit and overload protection 63A, TPN MCCB 25 kA,- 2 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
LIFT PANEL Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
250A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
125, 4P MCB 25 kA,- 7 Nos
63A, TPN MCCB 25 kA,- 7 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
LIGHTING PANEL
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
160A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
63A, TPN MCCB 25 kA,- 12 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
POWER PANEL
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
400A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
125A, TPN MCCB 25 kA,- 4 Nos thermal magneic trip relay - with short circuit and overload protection 63A, TPN MCCB 25 kA,- 8 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
UPS OUTGOING PANEL
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
100A, TPN MCCB 25 kA - 2 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections-2SET
Outgoing
63A, TPN MCCB 25 kA,- 10 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
UPS INCOMING PANEL@FIRST FLOOR
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitor through BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
125A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
100A, TPN MCCB 25 kA,- 4 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
STP Panel
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
125A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
100A, TPN MCCB 25 kA,- 4 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
DEPO POWER PANEL Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, indoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
250A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
63A, TPN MCCB 25 kA,- 8 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
UTILITY LIGHTING PANEL ( NEAR PETROL BUNK - OUTDOOR TYPE )
Supply, Installation, Testing and Commissioning of CPRI approved make of panel, cubicle type, Free standing, floor mounted, single front, 14 SWG CRCA sheet steel, enclosed separate compartment for each feeder, front operated, Powder coated, Outdoor type dust and vermin proof, hinged lockable doors, Earth leakage relay with suitable CT, UV release, multifunctional meter, volt meter and Ammeter with selector switch, cluster LED type indicators, in the incoming feeders, control wiring for Two sets of NO/NC potential free contact and one set of shunt trip (220V AC) shall be provided for remote monitorthrough BMS complete with electrolytic grade Copper bus bars, internal wiring, colour coding, ferrules, cable gland plates, Copper earth bus for the entire length of the panel with bonding to earth, Panel mounting MS Channels, fasteners, etc., including all associated control wiring. The panel details as follows:- Incoming
160A, TPN MCCB 25 kA - 1 Nos thermal magneic trip relay - with short circuit and overload protection Metering for incomer with suitable CT & protections
Outgoing
32A, DP MCB 10 kA, - 10 Nos - STREET LIGHT CONTROL Supply and providing of 1.5 sq.mm. copper flexible cable "24 Hours Programmable Timer Switch with Shortest Switching
Time15 Minutes "
63A 3 Phase 4 Pole Contactor 63A, TPN MCCB 25 Ka : 9 Nos thermal magneic trip relay - with short circuit and overload protection
1
-
-
150KVAR CAPACITOR PANEL
Supply, installation, testing and commissioning of 150 KVAR Automatic power factor correction panel ( APFC ) with 8 steps of capacitor switching cubicle type, free standing, Powder coated, 14 SWG CRCA sheet steel, enclosed separate compartment for each capacitor, front operated, indoor type dust and vermin proof, hinged, lockable doors, electrolytic grade aluminium bus bars, with SMC /DMC insulator supports, Digital volt meter, Ammeter with selector switch, 12 stage Digital Automatic power factor correction, ( APFC ), Auto / Manual selector switch, cluster LED type indicators, in the incomer, complete with electrolytic grade aluminium bus bars, MPP type Power capacitors, with 50 KVAR x 1 nos. 40 KVAR x 1 no. 20 KVAR x 2 nos. 10 KVAR x 2 nos. Contactors, MCCB’s, start, stop, push buttons, internal wiring, colour coding, ferrules, cable gland plates, Aluminium earth bus for the entire length of the panel with bonding to earth and painting, Panel mounting MS Channels, fasteners, etc., including all associated control wiring and interlocking circuitry, MV panel sensing CT interconnecting wiring etc., all inclusive.
1
-
-
LIFT ENCLOSURE
Supply and fixing of 63A TPN MCCB WITH ENCLOSURE-for Lift. The Enclosures shall be IP 65 with transparent flaps or Doors. The Enclosure shall have flaps to access the circuits based on the specific circuit requirements. The doors / flaps shall be made of Thermoplastic Polycarbonate and the rest of the Board shall be made of Polysterene. In case of extreme outdoor conditions as high UV radiation, the board shall be made of complete Polycarbonate material ( Please follow special remarks at the end of the specifications). The Distribution board shall be surface type and internal screws used for mounting Din Rails & fixing of the board shall be made of stainless steel V2A screws. Blanking strips shall be provided to ensure closure of unused module spaces. The Enclosure shall be with multi-level knockouts for cable glands.
6
-
-
LIGHTNING PROTECTION SYSTEM
Supply of Early Streamer Emission Air Terminal (ESEAT). Model: LThe ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 µs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ).ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level
2
-
-
Supply of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x 8mm MS plate, 3 mts. 48mm OD class C GI outer pipe,1.8 mtr, 38mm OD inner pipe, for roof mounting on concrete base and with FRP adapter ( Specification: It shows date of last record surgelt show time of last recorded shrgest show no of charges satatus of the battery) In addition of this curser provided too see pervious surgest history
2
-
-
EARTH ELECTRODE
Supply and installation maintenance free GI Earthling System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
4
-
-
TEST LINK Supply of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance
2
-
-
SURGE PROTECTION
Supply and installation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges and overvoltage’s in the power line due to lightning switching action etc. they must be installed in the incoming MCC panel / DB of the respective bulling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)
2
-
-
Supply and laying of 8mm Aluminum Round Conductor complete as necessary clamps / supports on wall / floor / ground for earth connection.
110
-
-
Supply, Installation, Testing and Commissioning of earthing station consisting of 600 x 600 x 3 mm. thick, copper Plate earth electrode, back filling with alternate layer of charcoal, salt, brick masonry work for chamber 450 x 450 mm. heavy duty CI cover, watering pipe, funnel and earthing conductor as per IS:3043 specification. All civil works required such as excavation in all types of soils, rocks, PCC Earthing Chamber foundation, reinstatement and making good the surface to match original, removal of surplus earth etc. are included.
34
-
-
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry
10
-
-
Supply, fabrication, of GI /Copper earth flat of following size in provided trench, clamping in wall, ceiling, with suitable Clamps/ saddles, connecting the joints through bracing / welding covering with bitumen paint including accessories wooden plugs, screws, fastener etc., all inclusive
-
-
-
50mm x 6mm GI Flat
910
-
-
25mm x 6mm GI Flat
1000
-
-
25mm x 6mm copper Flat
590
-
-
No8 SWG copper
7300
-
-
Supply, erection, testing, commissioning of 2x250KVA DG Set With Diesel Engine developing suitable HP at 1500 RPM, 4 Cycle, 12 cylinder, water cooled, turbo charged, complete with standard Accessories confirming to latest emission control latest norms coupled to alternator rated at 250 KVA, 3 phase, 4 wire, 0.8PF (lag), 415V, IP 21 enclosure, class F/H insulation, with AVR, mounted on a channel iron base frame with foot mounting AVM pads, confirming to IS 4722, 450 Litters fuel tank, 1x12V 80 AH battery with leads, AMF panel, Hospital type Silencer, with acoustic enclosure, control panel, inter connecting control cable, cable end termination, including necessary fuel tank system, lubrication system, cooling system, fabrication of exhaust M.S pipe system, supporting frame, structures arrangement, confirming to CPCB norms etc., synchronishing Panel and controlwiring all inclusive. Note: ( DG AMF with auto Synchronising control Panel). The Panel shall comply with all CEIG norms and shall be approved by the Departmental Officers. The rate is inclusive of internal control cabling, Transportation, Insurance, Loading and unloading Charges. The Contractor shall make arrangements for full load test at site without raising any charges.
1
-
-
Supply, Installation of 2x40KVA conventional type UPS with 30min battery backup with necessary interconnection cables, breakers, MS stand etc as required. The UPS Shall have
384V DC Three Phase Input and Three Phase Output with 64 nos of Exide 12V, "100AH" sealed maintenance free Battery. The battery Stand shall be Open type Powder coated Metal Battery Stand with insulated sheet and Battery to MCB to UPS ' U6' Nywin Cables each 5 meters, "U6" interconnecting Links - 32 Nos. The rate is inclusive of internal control cabling, Transportation, Insurance, Loading and unloading Charges. Excluding of Civil Foundation charges.
1
-
-
External Lighting
Supply, erection, testing and commissioning of High Mast Light system confirming to IS 875, 20 Mtr height with the following:-
High Mast Light system confirming to IS 875, 20 Mtr height with Hot dip galvanized complete with all accessories including 16x400 Watts LED LAMP flood light fittings and twin dome aviation Obtruction lamps. The mast shafts shall be in three finished sections. It shall also include accessories for high mast including head frame, steel wire rope 6mm dia (7/19 construction) double drum winch, Galvanised Lantern carriage arrangement suitable for suitable for connecting upto 16x400 Watts LED LAMP flood light fittings as per lighting design & its control gear boxes and lightning finial. Erection and commissioning of the high mast with the help of suitable equipments. Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. The Design and casting of suitable foundation with M-30 concrete for the high mast considering the safe soil bearing capacity. Supply and installation of earth pipe electrode as per IS 3043 complete with 3mtr long with 40mm dia 'B' class G.I. pipe Including 750mm x 750mm x 3mtr long excavation and construction of 850mm x 850mm x 300 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm x 10mm cast iron / RCC cover with frame and lockable facility. The plate electrode shall be filled with alternate layer of salt and charcoal as required full depth. The Cover shall be heavy duty to suit heavy vehicle movements: (2 per mast is mandatory, 1 for lightning and one for electrical) Supply of control panel/feeder pillar housing suitable timer contractor circuit for Automatic switch ON and switch OFF of the mast at a pre-set time. with accessories
7
-
-
Supply, Erection,Testing and Commissioning of 9mtr high hot dipped galvaniszed octogonal pole with 120W LED light Fitting. The Pole shall have bottom 155mm A/F top 70mm A/F made up of 3mm thick HT sheet Steel plate along with 450 x 450 x 16mm base plate and 1.5 mtr single arm bracket Suitable for above pole of ultimate strength 410 mpa IS 2713( part II )1986. Suitable for mounting 1 no of 120W LED Street Light Fitting including base plate and Concreate Foundation with M24 x 750mm long J type Foundation bolts( EN8grade). The Pole Should be Provided with 6 Amps SP MCB housed in Weather proof box DP 6 Amps MCB 4 way 30 Amps Rated terminal block for loop in and loop out cable arragnements, SMC box for Loop in and loop out including earth with 1 mtr long 25 mm dia B class GI pipe as Earth Electrode with charcoal, salt with 10 SWG GI Wire interconnected with street light Pole. Cable Entry & Exit in GI pipe of 2.5" Dia fitted in pole with clamps and as per drawing and technical specification.
85
-
-
Supply, Erection,Testing and Commissioning Of 7mtr high hot dipped galvaniszed octagonal pole with 120W LED fittings with bottom 155mm A/F top 70mm A/F made up of 3mm thick HT sheet Steel plate along with 450 x 450 x 16mm base plate and 1.5 mtr single arm bracket Suitable for above pole of ultimate strength 410 mpa IS 2713( part II )1986. Suitable for mounting 1 no of 120W LED Street Light Fitting including base plate and Concreate Foundation with M24 x 750mm long J type Foundation bolts( EN8grade). The Pole Should be Provided with 6 Amps SP MCB housed in Weather proof box DP 6 Amps MCB 4 way 30 Amps Rated terminal block for loop in and loop out cable arragnements, SMC box for Loop in and loop out including earth with 1 mtr long 25 mm dia B class GI pipe as Earth Electrode with charcoal, salt with 10 SWG GI Wire interconnected with street light Pole. Cable Entry & Exit in GI pipe of 2.5" Dia fitted in pole with clamps and as per drawing and technical specification.
11
-
-
Supply, Erection, Testing and Commissioning Of All in one Solar Street Light Fitting With 1 x 120w LED lamp, All in one fixed on 7 M Height Swaged Steel tubler Poles Mounted On RCC Foundation Along with 1.5 M long Bracket including providing base Plate and Concrete Foundation. Construction of Pillar accommodationg DP MCB Housed in Weather Proof box including wiring to the Light Fitting With 3C x2.5 sq.mm PVC insulated Copper Conductor Single Pole 3 Amps MCB 4way 30 Amps Rated terminal Block For Loop in & loop out Cable Arrangements Coil Earthing etc.The Pole Shall be painted with One Coat of primer and Two Coats of enamel painting with 1 mtr long 25mm Dia B Class G.I pipe as earth electrode, salt with 10 SWG Copper wire Interconnected with Street Light Pole. Cable Entry GI Pipe of 2.5" Dia as per drawing and Technical specifications.
20
-
-
Supply, erection, testing and commissioning of gatelight IP65 luminaire of 70 W LED light with highpressure diecast housing acting as heat sinkin or dertoensure better performance of the luminarie.With necessary GI bracket / MS withpowder coated bracket and all necessary fixing accessories.
14
-
-
Lift works
Supply, Erection, Testing and Commissioning Machine Room Lifts as per the following Specifications
"Design, Supply, Installation, Testing & Commissioning of stainless steel lift: 26 Passenger Elevator, 2 stops with machine room as per Specification & Details following Below : Passenger Type Elevator, No. of Units 1, Capacity -26 Person, Speed 1 m/s, Stops & Openings 2 stops & 2 openings, Single entrance car, Travel height 20 m, Head Room height as per drawing, Pit Height as per design, MAP Floor Position Topmost floor, Car dimensions 2400 mm wide x 1600 mm deep x 2400 mm height, Door dimensions 900 mm wide x 2100 mm height, Door type Two-panel centre opening Plain Panel, Car Operating Panels are Stainless Steel Face Plate, Segmented LCD display Square surface mounted Buttons. The Surface to be finished with- Car Panel & Door SS Finish ,SS Handrail at Rear Side, LED light Provision and Flooring as per Client requirement. .The work to be completed as per design and approval of the Architect, etc. complete. (Rates includes submission of drawing ,liasioning works with ceig and obtaining approval, licence and safety certificate for operations of lift.)
6
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable MS conduit pipe on wall and ceiling with MS accessories GI metal back box and 6A modular switch in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point (length of point 9 to 14 mtr)
152
-
-
Wiring, testing and commissioning of 2Rx1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC conduit pipe concealed wall and ceiling with PVC accessories in flush with manufacturer's GI metal back box and 6A modular switch in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, and making good of the concealed portion with suitable colour for PVC concealed point (length of point 7.5 to 9.0 mtr)
681
-
-
Wiring, testing and commissioning of 2Rx1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC conduit pipe on concealed wall and ceiling with PVC accessories in flush , ISI marked concealed in ceiling with PVC accessories for additional light (length of point upto 6 mtr)
294
-
-
Wiring, testing and commissioning of 3R x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC conduit pipe on concealed wall and ceiling with PVC accessories in flush with wall with manufacturers GI metal back box and 6A modular two way switch in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, (Two way) and making good of the concealed portion with suitable colour for concealed staircase light point.
18
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade Pvc conduit pipe on concealed wall and ceiling with Pvc accessories GI metal back box and 6A modular switch & 2 module Fan Requlator in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point (length of point 9 to 14 mtr)
186
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V PVC conduit pipe concealed wall and ceiling with PVC accessories GI metal back box and 6A modular switch & 6A modular Socket ( board itself Point ) in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point
158
-
-
Lift Shaft Wiring : Wiring, Connecting, Testing & Commissioning for lift well light point and 6Amps power socket outlet for all 4 floors with 2 x 2.5 sqmm FRLS PVC insulated stranded copper conductor of 1100V grade along with 1 x 2.5 sqmm FRLS PVC insulated standed copper conductor cable as earth wire in MS conduit including providing and fixing switch box, 2 Nos. of 5A single way module switch (for controlling light point and socket Outlet ) for each floor of the lift well , with bulkhead lamp 1 No. 5A 5 Pin shuttered socket outlet with flush type switch for each floor of the lift well and making necessary connections complete etc.
36
-
-
SOCKETS
-
-
-
Supply and fixing of manufacturer's GI metal back box and 6A modular switch, 6A 3 pin and 2pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
60
-
-
Supply and fixing of manufacturer's GI metal back box and 16A modular switch, 6/16A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
268
-
-
Supply and fixing of manufacturer's GI metal back box and 2nos 6A modular switch, 2nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
20
-
-
Supply and fixing of manufacturer's GI metal back box and 3 nos of 6A modular switch, 3nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
195
-
-
Supply and fixing of 20A DP Switch With indicator(2M) 20Amps 3 Pin Socket With Shutter Type , combined flush type wall socket. For Split AC unit UNIT in switch along with moulded front plate in G.I anodised manufaturer's mounting box fixed flush with the wall complete with all accessories as required as per the site condition.
49
-
-
MAINS WIRING
-
-
-
Supply, run, testing and commissioning of 2Run 2.5 sqmm and 1R of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable MS Conduit pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour.
9620
-
-
Supply, run, testing and commissioning of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of Grade in suitable MS Conduit pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour.earth wire connection of 2.5 sq.mm wire PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour (for Bus bay fitting, 15 Amps socket, 20 Amps AC socket)
3230
-
-
Supply, run, testing and commissioning of 2Run 2.5 sqmm and 1R of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour. Vetical drops for Shop, WaitingAreas, Toilets, office Room , etc.....
2000
-
-
Supply, run, testing and commissioning of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of Grade in suitable PVC Conduit pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour.earth wire connection of 2.5 sq.mm wire PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour (Vetical drops for 15 Amps socket, 20 Amps AC socket)
1000
-
-
MCB CONTROL BOX/ PVC CONDUIT
-
-
-
Supplying, installation, testing and commissioning of 32 AMPS SPN industrial plug & socket for Bus depo dock with 32 Amps SP MCB in Manufactures box fixed flush with the wall including cost of material, necessary interconnection etc, with earthing etc., all complete and as directed by the departmental officers.,
6
-
-
Supplying, installation, testing and commissioning of 32 AMPS TPN industrial plug & socket for e vechicle charging with 32 Amps 4P MCB in Manufactures box fixed flush with the wall including cost of material, necessary interconnection etc, with earthing etc., all complete and as directed by the departmental officers.,
6
-
-
Supply and fixing of 100A TPN sheet double break switch with HRC fuse and nuetral on suitable angle iron frame work with MS Cable entry boxes with PWD Earthing
6
-
-
Supply and laying of following size PVC/MS conduits in floor/wall/ceiling etc.including necessary bends, elbow,etc,in concealed system below the false ceiling on wall/floor and open system on above false ceiling.(for general purpose & for work station etc.)The rate shall includes minor civil works such as floor cutting, chipping, plastering and to make good finished surface to match with the original surface
-
-
-
25 mm DIA MS PIPE
300
-
-
25 mm DIA PVC PIPE
300
-
-
Supplying and concealing modular type TV /Telephone socket with top pin with suitable with concealed type manufacturer's GI metal back box and TV / Telephone modular socket in flush with wall mounted on poly carbonate front plate with socket mounting metal parts, for making good of the concealed portion with suitable colour.
20
-
-
DISTRIBUTION BOARD
-
-
-
Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
15
-
-
Supply and fixing of 7 segment 4 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
3
-
-
Supply and fixing of 7 segment 6 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
2
-
-
Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal) with 1 no.63A 4P MCCB switch as incoming and 2 nos.32A 3P MCB , AND 6nos 16 SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End
6
-
-
Supply and fixing of double door type 12way SPN MCB board with IP 42 Protection with 63A 4 pole MCB isolator as incoming and 6Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be with the ISI mark etc., all Complete, complying with relevant standard specification and as directed by the Departmental Officers.
37
-
-
Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 42 / Weather proof Protection Double Door type with powder coated including all interconnections and accessories like bolts, nuts and associated civil works, etc; The rate shall be inclusive of necessary cable/conduit adopter boxes for IN and OUT wiring. 4 W TPN Outdoor DB - ( External Lighting - Outdoor type with suitable Pedestal frame with lock and key )
Supply,Erection, Testing and Commissioning of the following Type feeder pillar enclosure with MCCBs / MCBs /ELCBs, / Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the CMDA department requirement.
Incomer 63 A TPN MCCB with Timer control On/OFF 32 DP MCB + ELCB - 12 Nos :
4W TPN Outdoor DB. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. The rate shall be included to fixing the DB where as in concealed / or open as per site condition.
1
-
-
LIGHT FITTINGS
-
-
-
Supply, installation, testing and commissioning of 20 W LED tube light fitting with cool day light made out of CRCA powder coated body, poly methyl meth acrylate (PMMA) diffuser, glare free light, Suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive.
99
-
-
Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.
286
-
-
Supply, installation, testing and commissioning of 36 W LED 2X2 light fitting with cool day light, made out of CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive.
166
-
-
Supply, installation, testing and commissioning of 28 W LINEAR LED light fitting with cool day light, made out of CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, suitable for recessed / surface mounting including electronic drivers, day light colour LED lamps, inter connecting wiring including accessories all inclusive.
223
-
-
Supply, installation, testing and commissioning of 250 W LED FLOOD LIGHT FITTING with cool day light suitable for surface / recessed mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.
55
-
-
Supply, installation, testing and commissioning of 90 W LED HIGH BAY LIGHT FITTING with IP65 cool day light suitable for surface mounting made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.
109
-
-
Supply, Installation, Testing & Commissioning of 10W LED bollard light fittings Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be require with lumen package as per requirement. Crompton CAT REF : - LBLA3-10-CDL / Equivalent-(LANDSCAPE LIGHT). rate shall inclusive of necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application .
50
-
-
Supplying, installation, testing and commissioning of 1200 mm (48") sweep AC ceiling fan complete with out modular type stepped electronic 300W regulator, with 1 metre down rod with all required accessories.including point wiring ( 5 STAR )
143
-
-
Supplying, installation, testing and commissioning of 300 mm (12") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories.
40
-
-
Supplying, installation, testing and commissioning of 375 mm (15") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories.
12
-
-
Supplying, installation, testing and commissioning of 450 mm (8") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories.
4
-
-
Supply, Installation, Testing and commissioing of Sturdy & heavy duty aluminium blade for higher air delivery | Sleek & stylish design 120 spokes nickle chrome plated guard | Smooth oscillation 600MM SWEEP, 100W MOTOR, 1400RPM, 110CMM AIR DELIVERY with Suitable switch socket outlet for maintenance isolation.
8
-
-
LT ,1100V GRADE PVC / XLPE Armoured UnderGrounds Cables.
-
-
-
Supply and laying of 3.5 X 400 Sqmm Sqmm PVC / XLPE armoured LTUG cable in the existing cable trench
330
-
-
Supply and Laying of 3 1/2 x 185 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
425
-
-
Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
875
-
-
Supply and Laying of 3 1/2 x 95 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
175
-
-
Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
1825
-
-
Supply and laying of 3.5 X 25Sqmm Sqmm PVC / XLPE armoured LTUG cable in the existing cable tray
280
-
-
Supply and laying of 4C X 16Sqmm Sqmm PVC / XLPE armoured LTUG cable in the existing cable tray.
3680
-
-
Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
4725
-
-
Supply and laying of 4CX16sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
Supply and laying of 4CX10sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
Supply and laying of 4CX6sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
Supply and laying of 3CX6sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
Supply and laying of 3CX4sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
Supply and laying of 3CX2.5sqmm Cu. armoured LTUG Cable in the existing cable tray
1550
-
-
Supply and laying of 1CX35sqmm Cu. armoured LTUG Cable in the existing cable trench / Cable Tray
165
-
-
Supply and laying of 16CX2.5sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
Supply and laying of 8CX2.5sqmm Cu. armoured LTUG Cable in the existing cable tray
100
-
-
CABLE GLANDS
-
-
-
Supply and fixing of brass cable gland for 3.5 x400 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. SD-196
10
-
-
Supply and fixing of brass cable gland for 3.5 x185 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. SD-193
6
-
-
Supply and fixing of brass cable gland for 3.5 x120 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. SD-191
12
-
-
Supply and fixing of brass cable gland for 3.5 x95 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. SD-190
4
-
-
Supply and fixing of brass cable gland for 3.5 x35 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. SD-187
14
-
-
Supply and fixing of brass cable gland for 3.5 x25 sqmm aluminium cable XLPE armoured LTUG cable with earth connection. SD-186
18
-
-
Supply and fixing of brass cable gland for 4C x16 sqmm aluminium cable XLPE armoured LTUG cable with earth connection.
112
-
-
Supply and fixing of brass cable gland for 4C x10 sqmm aluminium cable XLPE armoured LTUG cable with earth connection.
190
-
-
Supply and fixing of brass cable gland for 4C x16 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 4C x10 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 4C x 6 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 3C x 6 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 3C x 4 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 3C x 2.5 sqmm COPPER cable LTUG cable with earth connection.
400
-
-
Supply and fixing of brass cable gland for1C x 35 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 16C x 2.5 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
Supply and fixing of brass cable gland for 8C x 2.5 sqmm COPPER cable LTUG cable with earth connection.
10
-
-
CABLE END TERMINATION
-
-
-
Supply and providing cable end termination of 3 1/2 X 400 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 3 1/2 X 185 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
6
-
-
Supply and providing cable end termination of 3 1/2 X 120 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
12
-
-
Supply and providing cable end termination of 3 1/2 X 95 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
4
-
-
Supply and providing cable end termination of 3 1/2 X 35 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
14
-
-
Supply and providing cable end termination of 3 1/2 X 25 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
18
-
-
Supply and providing cable end termination of 4 X 16 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
112
-
-
Supply and providing cable end termination of 4 X 10 Sqmm PVC LTUG Aluminium armoured cable with necessary Aluminium cable sockets by crimping etc, with electrical connection complete.
190
-
-
Supply and providing cable end termination of 4 X 16 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 4 X 10 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 4 X 6 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 3C X 6 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 3C X 4 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 3C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
320
-
-
Supply and providing cable end termination of 1C X 35 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 16C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and providing cable end termination of 8C X 2.5 Sqmm PVC LTUG Copper cable with necessary copper cable sockets by crimping etc, with electrical connection complete.
10
-
-
Supply and clamping of 120mm dia HDPE Pipe on wall in trench with MS clamps
1000
-
-
Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be IP Rated for outdoor applications, environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529.
195
-
-
Supply and installation of following size of GI Ladder / preforated cable tray including pre fabricated horizontal and vertical bends, reduces, tees, cross members with 300 mm spacing and other accessories as required and duly suspended from the ceiling, wall with MS angles, channels, suspenders, including painting, anchor fasteners, civil works etc., as required as per specification.
-
-
-
600X50mm Perforated Tray
50
-
-
450X50mm Perforated Tray
350
-
-
300X50mm Perforated Tray
450
-
-
150X50mm Perforated Tray
750
-
-
LADER TYPE TRAY
-
-
-
600 X 50 mm lader Type Tray
100
-
-
450 X 50 mm lader Type Tray
100
-
-
300X50mm lader Type Tray
100
-
-
150X50mm lader Type Tray
100
-
-
Supply, cutting, and fixing of 8mm thick chequered plate with required MS angles.
50
-
-
Supply and fixing Sheet steel of 14 SWG for connecting the tray
50
-
-
Supplying and fabricating of MS structural steel supports for various applications using Uchannels, MSangleiron, bolts, nuts, ancho bolts etc., required for the work,cut to the size, benttoshape, welding, grouting etc.,complete. Supports shall be powder coated with required colour for different system as mentioned above
3
-
-
SAFETY ACCESSORIES
-
-
-
Supply and installation of Danger board as required by the Electrical authorities of size 500mm x 300mm of 16SWG MS of the Substation / Electrical room.The lettering shall be asper TNEBstandards.
5
-
-
Supply and laying of chequered rubber mat with IS mark suitable for 440V installation asper IS15652-class -A.600mm x 300mm size -Suitable to withstand the specifed voltage-test ertificate to be produced.
10
-
-
Supply and laying of chequard thick 1000mm wide chequered rubber mat with ISI mark suitable for 11KV installation. 600mm x 300mm size Suitable to withstand the specifed voltage - testcertificate to be produced.
10
-
-
Supply & Fixing of MS sheet board of size 500mm x300 mm of 16SWG with Entry Restricted To Authorised Persons Only near the Mainentrance of the Substation. The lettering shall be Black painted on Yellow Back ground
2
-
-
Supply of tested hand gloves of 11KV grade as per IS standards
2
-
-
Supply of hand gloves 440 V grade as per IS standards
5
-
-
Supply and providing first aid box with 18SWG MSs heet dulypainted as approved by Indian redcrosssoce ity complete with all firstaid basic medicines.
5
-
-
Supply and fixing of HT/LT cableroute indicato rmade out of MS flatand angle iron.
100
-
-
Supply of Aluminium adjustable type ladder , height upto 25 feet
1
-
-
Supply of Aluminium adjustable type ladder , height upto 20 feet
1
-
-
Supply of Aluminium adjustable type ladder , height upto 15 feet
1
-
-
Supply of Aluminium adjustable type ladder , height upto 10 feet
1
-
-
Supply of Birds Spike with necessary works etc
75
-
-
Supply and installation of flush mounted wind driven natural roof extract fan of alloy stee; of dimension 55cm D x 66cm W x 77 cm H.
25
-
-
FIRE FIGHTING WORKS
-
-
-
Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpsetof 900 LPMat 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant pointto make 30 m water jet at the timeof firefighting emergency cicumstances, coupledwith11KW/ 15 HP rated three phase 414 volts, 50 Hz, 2880 rpmelectrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia.,including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)
3
-
-
Supply, errection, testing and commissioning of Fire Fighting Electrical Control Panel of 15 HP, 415 V, 50 Hz Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: a. 63 Amps, 4 Pole MCB - Incomer, 6 Amps, 2 Pole MCB for Control Circuit - 1 set b. R,Y,BPhaseIndicationLamp,VoltMeter(0-500V), Ammeter(0-50A),VoltMeterSelectorSwitch-1set c. 32 Amps Power Contactor with 230 V Coil,14 - 23 Amps Over Load Relay - 1 set d. SinglePhasePreventer-1No. e. IndicationLampforMotorON/OFF/TRIP-1set f. AUTO / MANUAL Selector Switch, ON / OFF PushButton - 1 set g. Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover,Presure switch&Support angle The above panel mounted on wall using anchor fasteners bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard methods and as directed by the Departmental Officers..
3
-
-
Supply and laying of 4 core 10 sq.mm. armoured copper cable forpower wiring to the Terrace Pump Motor withruns of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
120
-
-
Supply and laying of 2 core 1.5 sq.mm. armoured copper cable for control wiring to the Terrace Pump Motor with runs of 14 SWG TC wire for earthing, providing in wall with suitable size GI clamps, screws, wooden plug, end termination by using suitable size cable glands, copper sockets and etc., as directed by the Departmental Officers.
120
-
-
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method ofarc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standardspecification and as directed by the Departmental Officers.Make: JINDAL / EQUIVALENT.
-
-
-
100mmdia
60
-
-
25mmdia
15
-
-
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
100mmdia
6
-
-
FIRE HYDRANT SYSTEMS:
-
-
-
Supply, erection, testing and commissioning of following MS ‘C’ Class Heavy Duty Pipe as per IS 1239 to withstand a developing pressure of 10 kg. / sq.cm including necessary fittings like MS flange of table ‘E’, elbows, reducers, gaskets, bolt, nuts with washers & joints as per standard method ofarc welding, including one coat metal primer and two coat Post Office Red painting including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standardspecification and as directed by the Departmental Officers.Make: JINDAL / EQUIVALENT.
-
-
-
100mmdia
280
-
-
80mmdia
25
-
-
25mmdia
25
-
-
Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle butterfly valve / sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding andre-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT
-
-
-
100mmdia
12
-
-
Supply, erection, testing and commissioning of Cast ironbody and Gun metal or stainless steel internal Non-return valve of followingsizes to control one way flow of water to be installedpump room at delivery line and near overhead tank at terrace level near to jockey pump and motorincluding necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312 including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
-
-
-
100mmdia
3
-
-
Supplying, erecting and commissioning of Hydrants
-
-
-
Servicing the SS Hydrant Valves by disconnecting from pipe line, dismantling, checking the operation of rotating spindle, replacing rubber 'O' ring of valve seating, repalcing rubber gasket of 80mm dia OD x 65mm dia ID, repalcing the 5/8" x 21/2 bolt, nut, washers, re-connecting with hydrant system as per standardmethodsandasdirectedbytheDepartmental Officers.
12
-
-
Servicing the First Aid Hose Reel Drum assembly by disconnecting from hydrant line, replacing shut off nozzle, warm clip, lubricating the rotating assembly, replacing 20mm dia, 30 metres long rubber hose, re- connecting with hydrant system as per standard methods and as directed by the Departmental Officers.
24
-
-
Supply, erection, testing and commissioning of Fire Fighting2 Way Fire Brigade Inlet with necessary gun metal 63mm dia non-return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary., etc., complete as per standard specification and as directed by the DepartmentalOfficers. (Make: KIARTAR / OMEX / EQUIVALENT)
4
-
-
Supply, erection, testing and commissioning of Air Release Valve of 20mm dia, so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: KARTAR / EQUIVALENT.
3
-
-
Providing, fixing pipe supports from columns / wall or suspenders from roof slab to suit various dia of pipes made out of GI / MS adjustable rods threaded for a sufficient length to adjust the height of support along with clamping arrangement for holding pipes of anchor fastening, arrangement design of hanger and should confirm with specification.
-
-
-
100mmdia
150
-
-
80mmdia
150
-
-
FIRE EXTINGUISHERS:
-
-
-
Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity.
-
-
-
Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. CO2 6kg& 4kg for EB room etc.Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
14
-
-
Supply and fixing of stored pressure ABC (Mono AmmoniumPhospate)PowderTypeFireExtinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mountingbracket, safety clip etc., including conveyance, all incidental charges,neccessaryscaffolding andre-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
14
-
-
Supply and kept in positionof 9litres capacity FireBucketsof 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers
7
-
-
Supply and fix Internal glass fronted duct Door with hinged and lock,made out of 16 Aluminium powder coated(po red) sheet of suitable size
12
-
-
Supplying,Installing,testing and commissioning of Test & Drain valve of size 50mm.
12
-
-
FIRE ALARM SYSTEM:
-
-
-
Supply, installation, testing and commissioning of Micro Processor based conventional 4 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply,consisting230/24voltSMPSunit,2Nos.of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.
2
-
-
Supply, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.(Make: Ravel / Equivalent)
16
-
-
Supply, installation, testing and commissioning of Electronic Hooter / Sounder providing on wall using fixingaccessorieslikescrews,plug,clampsandetc.,as per standard methods and as directed by the Departmental Officers (Make: Ravel / Equivalent)
16
-
-
Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., asper standard methods and as directed by the Departmental Officers.
1200
-
-
Supply,Installation,Testing and commosioning of Photovoltaic type smoke detector,DC Voltage ranging from 8V to 30V and it draws 10ampere current and it has bicolour LED detector status indicator with programmable sensitivity. It has the advanced maintainence features via remote hand held test unit.MAKE-RAVEL/SYSTEM SENSOR/ APOLLO.
17
-
-
Supply,Erection,Testing and commisioning of conventional type heat detector with Operating Voltage ranging from 8.5 to 35 volt DC, humidity ranging from 5 to 95%RH and it will detect temperature in the ranger of 90 deg celsius and it has 194 deg Fahrenheit fixed temp, single circuit mechanical heat detector. MAKE-SYSTEM SENSOR
6
-
-
Supply,Erection,Testing and commisioning of fire man switch for Lifts
6
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements