Chennai Metropolitan Development Authority Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Chennai Metropolitan Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date21 Aug 2023
Closing Date11 Sep 2023
Tender AmountRefer Documents
Costs
EMD
₹ 1,59,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CMDAC_361625_1Bid Award Id
ViewTender No
Tender Notice No.14(D)/23-24Tender Authority
Chennai Metropolitan Development Authority ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Dismantling brick work manually by serviceable material and disposal of unservice material within 50 meters lead as per direction of Engineer in charge.
77.5
-
-
Earthwork excavation for foundation (for narrow excavation) to full depth as per designed in all soils and sub soils except soft disintegrated rock not requiring blasting and hard rock requiring blasting and bailing water wherever necessary. Refilling the sides of foundation with excavated earth other than sand in layers of well rammed and compacted and depositing the surplus earth in places shown by the departmental officers with an initial lead of 10m and initial lift of 2m and clearing and leveling the site etc. complete complying with standard specification.
1190
-
-
Supplying and filling Gravel by Lorry in basement filling including conveyance loading and unloading consolidationg with larger of 300 mm thk charges and all other incidential charges laying watering labour and consolidation etc., complete as directed by Dept., Officer with standard specification.
750
-
-
Filling with filling M - sand in foundation and below pavement for 100mm depth and well watered, rammed and consolidated by power compacter.The rate includes the cost of M sand and labour charges leveling, loading & Unloading and Transportation etc., complete and as per the standard specification.
20
-
-
Providing Pre construction Anti termite treatment for the building including all chemicals as per standard specifications. Labour charges for preparing the areas for treatment spraying chemicals and other incidential charges etc., complete. The rate shall be inclusive of giving anti-termite treatment to the building for the following four stages including breaking the termite mounds making holes with crow bars at an intervel of 12"to a depth of 8" in the periphery of building and pouring chemicals etc., complete as per ISI 6313-1981 and. The antitermite chemicals used should have 0.5% concentration with 3L solution for the entire operation etc. as directed by the Engineer incharge and including cost of chemicals labour transportion etc., Stage:1 Spraying Anti-termite treatement chemicals solution for the foundation before laying the foundation concrete bottom and sides of the foundation.
Stage:2 Spraying anti-termite chemicals solution to the grade beams level spraying has to be done for the grade beams brick masonry in the superstructure in contact with back fill earth.
Stage:3 Spraying anti-termite chemicals solution on sand for the flooring before laying the flooring concrete. The treatment has to be carried out on the sand filling the basement after leveling operation is over.
Stage:4 Spraying anti-termite chemicals solution around the building outside of the building by making crow bar holes at an intervel of 12" to a depth of 8" around the building before laying the plinth projection. This holes has to be be closed after the treatment.
220
-
-
Providing and laying plain cement concrete 1 : 4 : 8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) in foundation and basement including dewatering wherever necessary and laid in layers not more than 15 cm thick and consolidation etc.
82
-
-
Providing formwork for centering shuttering etc. for all RCC works including strutting for height upto 3.29m using mild steel sheets of size 9 90 X 60 cm 10 gauge stiffened with MS angle of 25 X 25 X 3mm for boarding, laid over adjustable span & jacks and supported by 50mm dia pipes for general pipes scaffolding systems @ a spacing of 1.20m c/c and vertical connected at a height of 2.0m c/c including 'C' & 'U' clamps and base receiver cup at bottom for connecting pipes etc and removable systems etc., Rate to include all materials, labour charges, wastages , placing, transportation, lead & lifts, tools & plants, fuels, fixing in position at all levels, heights, masking tape in sheet joints, consumables, etc. as complete with all respects complying with relevant standard specification, as directed by the Client / Engineer-in-charge.
-
-
-
For Plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
467
-
-
For column footing plinth beam bed blocks templates staircase, steps piers, raft beam, raft slab etc.
452
-
-
For plane surfaces such as rectangular or square rcc columns, sunshades, top and bottom slab of rcc boxing, etc.
245
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical walls etc.
245
-
-
Supplying, fabricating and fixing in position of steel Fe 500 grade Reinforcement for all RCC work with Thermo Mechanically Treated Bars (TMT) conforming to IS 1786 of latest version according to drawings and binding the reinforcement with 18 gauge double fold GI binding wire and providing Concrete / PVC cover blocks to maintain the cover as required.Rate to include all bending, tying grills, placing, transportation, lead & lifts, tools & plants, fuels, all materials, labour charges, wastages , laying at all levels, fixing in position, cost of cover blocks, etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
25
-
-
Providing and Laying M 30 Design Mix for all reinforced cement concrete with minimum cement content conform to IS 456-2000 using ordinary Portland cement of grade 53 from approved manufacturer, manufactured sand, 20 mm and down graded size coarse aggregates, necessary approved admixtures as per requirement. works for Raft, Grade beam, Shear wall, RCC walls, Lift walls, Plinth beams, Column, footings, Grade slab, Roof slab & beam, Curved slab, beam, Column drops, Pergola, Staircase waist and landing slab lintel, Sunshades, parapet Cum drops, Steps, canopy, window boxing slab, Loft, fins facia Planter box binders basement retaining wall, machine foundation, elevation features and other similar structures etc..excluding necessary centering, shuttering and reinforcement which shall be measured and paid separately under relevant items.
Rate to include all designing the mix, batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, pumping the concrete to all levels, providing sleeves / openings in RCC slabs, compaction by vibrator, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-
in-charge
-
-
-
For Basement
152
-
-
For Ground Floor
84.5
-
-
Supply and constructing cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 200 mm and 200 mm thick of solid cement concrete with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent complete and as directed. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc,. only shall be used. Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
110
-
-
Supply and constructing 100 mm thk cement concrete solid block masonry work at all levels in cement mortar 1:5 (1 of Cement : 5 of manufactured sand ) using Portland Pozzolana Cement standard size of 400 x 100 x 200 mm of solid cement concrete blocks, with minimum compressive strength of 5 N/Sq.mm.conforming to IS 2185 or equivalent BS and Fly ash conforming to IS : 3812 (Part III)-1966* may be used for part replacement of fine aggregate up to a limit of 20 percent. Concrete blocks manufactured under strict quality control conditions using modern rugged block casting and stripping machine with the latest moulding techniques etc. only shall be used.
Rate to include all materials, labour charges, wastages for working at all levels with necessary lead and lifts, transportation charges, loading, unloading, scaffolding, staging, curing, fuel, consumables as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
95
-
-
Special ceiling plastering and finishing all RCC exposed surface such as RCC slabs, sunshades, canopies, staircase, steps, landing slabs etc., with CM 1:3 according to the specification. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
215
-
-
Plastering the internal wall surface in cement mortar 1:5 (one cement:five sand) 12mm thick in all floor levels including curing complying with standard specification Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
585
-
-
Plastering 15 mm thick for external surfaces in cement mortar 1:5 (one cement: five P sand) with water proofing compound of “CICO No.1 or equivalent“ as per Manufacturer's Specification with sponge finish (washed sand finish) all complete as per specification and as directed.
Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, scaffolding, stagging, providing drip bands, moulds, grooves to any size and shape as shown in drawings tools and plants, fuel, curing, cleaning, consumables etc as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
1739
-
-
Supply and painting of two coats of Acrylic emulsion paint of approved shade and colour over one coat of DCP Primer including one coat of Acrylic Wall Putty with DCP Primer.
Rate including all brush, roller, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.(Internal surface)
840
-
-
Supplying and painting of 2 coats of weather proof exterior emulsion with high sheen, anti algal properties over one coat wall exterior primer of approved quality and shade etc., complete.Rate including all brush, ladder, scrapping, washing, materials, labour charges, wastages , cleaning, necessary lead and lifts, scaffolding, stagging, working at all levels, elevations, transportaion charges, loading, unloading, curing, sanding, touchup putty, surface thoroughly cleaned and wetted before painting as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
4560
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. ( The make quality and colour of paint should be got approved by the executive Engineer before use on works.)
310
-
-
Flooring with Joint free double charged vitrified tiles of approved quality, colour and design joint free of size 600 x 600 x 8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officers. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
100
-
-
Supply and Laying skirting 100 mm high with vitrified floor tiles confirming to IS 13006/EN 176 Group B1a with techical specification of approved make , set in C.M 1:3 (1 of Cement : 3 of manufactured sand) 12 mm thick and pointing the joints with white cementt compound and matching corner tile beading. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, chasing of wall for flushing the tile inline with wall surface, preparation of surface, ncessary haccking in RCC surface, cutting of tiles to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over Plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
90
-
-
Providing Ceramic tiles of size 305 x 305 x 6mm flooring approved make and quality with plain/colour with base mortor in CM 1:3, 10mm thick and pointing with white cement by adding suitable colour pigments including finishing, jointing and polishing with neat finish etc., complete. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
69
-
-
Dadooing the wall with ceramic tiles of approved quality, colour and design joint free of size 600x300x10mm thick of approved make, in all floors over a base layer of cement mortar 1:2 (one cement: Two sand) 10mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40 kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications. Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
225
-
-
Supply and laying with best quality the following materials of Machine Polished granite slab for wash basin counter top of 18 mm thick (Jet Balck) including cutting for wash basin and edge polishing to be set in CM 1:4 (1 of cement : 4 of manufactured sand) 20 mm thick including finishing the joints with white cement slurry, cutting, edge chamfering to approved shape and polishing rough, medium, nice and tin-oxide polish.Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, preparation of surface, ncessary haccking in RCC surface, cutting to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge.
6
-
-
Flooring with new CC laminated tiles (like Dora tiles, eurocon tiles etc., anti skid) of 20mm thick approved special quality and set in CM 1:3 (One cement and three sand) 20mm thick using river sand and pointing with colour cement at the rate of 0.40kg/m2 and mixing with colour pigment at the rate of 0.30kg/m2 including finishing etc., complete complying with standard specification and as directed by the Departmental officers. The colour & quality of tiles should be got approved by the executive engineer before use on work. and as directed by the Client / Engineer-in-charge.
50
-
-
FOAMED PVC DOOR FRAME Specification: Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6 Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3 Nos. to be provided for each vertical member, GI stiffeners of ('U' channel of size 29 x 9, 1mm, 150mm long) - 3 Nos. at hinge point, frame reinforcement of ('U' GI channel of size 46 x 22 x 0.6mm), bottom tie rod of ('U' GI channel size of 15 x 15 x 1mm), etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work
Providing of 35mm thick factory made pre-laminated ABS(Acrolynitrile Butadiene Styrene) Door Shutter moulded indifferent designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x32mm, reinforcedby 32 x 32mm - 2 Nos., for vertical made out of LVL(Laminated Veneer Lumber), core material of 32mm thickhigh density craft paper honey comb board, sandwiched onboth sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides.Hardware made out of steel coated butterfly hinges - 3 Nos.,for each shutter and ISI make SS round lock complete forfinished item of work, complete complying with the standardspecification. The door shutter and frame should be gotapproved from the Executive Engineer before use on work
-
-
-
Door Size 1200 x 2100
4
-
-
Door Size 1000 x 2100
20
-
-
Door Size 750 x 2100
20
-
-
UPVC Window
Specification:
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM
rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and
outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
20
-
-
UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work
5
-
-
Providing and fixing welded M.S. grills to the window openings,along the details as per drawing with necessary screws, bolts and fixed with necessary M.S. lugs embedded in masonry with C.C. 1:2:4 and finishing the surface neatly. Rate shall welding and consumables, etc. complete, as directed. Design of grills and the size of members to be used shall be got approval before put into use & as directed by the Client / Engineer-in-charge.
7185
-
-
Weathering course-using broken brick jelly 20 mm gauge in pure slacked lime (No sand to be used) over RCC roof slab. The proportion of broken brick jelly to slaked lime being 32:12½ cft well beaten by wooden beaters for giving required slope. Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
35
-
-
Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm of approved quality laid in CM 1:3 (one cement and three sand) mixed with 2% of water proofing compound by weight of cement used and pointed with the same oiled mortar including mixing of red oxide etc ., Rate including all materials, labour charges, wastages, necessary lead and lifts, transportation charges, loading, unloading, with all respects complying with relevant standard specification and as directed by the Client / Engineer-in-charge.
215
-
-
Providing and laying Brick jelly Lime concrete 1 : 2 : 5 in Toilet sunken areas, including Leading, Lifting, mixing, laying finishing etc, and laid in layers not more than 15 cm thick and compaction etc, Complete.,
5
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
25
-
-
Providing dadoing with machine cut polished best quality approved colour Flamed granite slab (Steel grey) of thickness not less than 20mm of size 1200x600 mm, set in C M 1:3 (1 of cement 3 of manufactured sand), thickness not less than 20 mm including pointing with matching colour of Latapoxy SP100 and fixing with stainless steel clamps 6mm dia and 100 mm long welded with 40 mm and 25 mm long pieces at two ends to right angle, the former with horizontal position to be embedded in brick wall/ concrete surface and the later with vertical position to be inserted and caulked in to the holes of the slab, drilled for the purpose, both forming T shape and cement grouted including edge polishing wherever required and forming groove at joints as directed at all levels Rate including all materials, labour charges, wastages, necessary lead and lifts, working at all levels, transportaion charges, loading, unloading, filleting/ chamfering of the edges along with partial recessing of the skirting into masonry, preparation of surface, ncessary haccking in RCC surface, cutting of tiles to required shape, edging, tools and plants, fuel, curing, cleaning, acid wash over finished surface, protection with Gypsum / Pop layer over Plastic sheet and removing the same before handing over as complete with all respects complying with relevant standard specification and as directed by the Engineer-in-charge Rate shall include for preparation of base surface, cleaning, chamfering, edge polishing, with tin-oxide/ high gloss factory polish, provision of V shaped notch cuts along the horizontal and vertical joints of specified size as detailed in the drawing protection with Gypsum/POP layer over plastic sheet etc. complete, as directed.
70
-
-
Design, Supply, fabrication and erection of Tensile Structure Using mild steel section Main vertical member 168 mm dia CHS 5 mm thk above new foundation structure with 12 mm thk Base plate including 500 mm length 16 mm dia bolt. 114.3 mm thk CHS 5.4 mm thk with base plate 10 mm thk fixing above the existing pedestal with anchor fastener as per the drawing and details. Main roof frame 88.9 mm CHS 4 mm thk intermediate section 76.1 mm CHS 6 hh thk and End section 80 x 80 x 4 mm thk SHS and painting with epoxy primer & paint. The membrane fabric shall be Ferrari/Verseidag Fabric Type - I. The mild steel structure has to be surveyed and the fabric pattern has to be generated and the same will be plotted and welded. The cables and corner plates are GI, pockets will be filled with PVC cedars and fixed on to the steel structure by using fasteners. Including Gutter provision etc complete as per design and details.
750
-
-
Supply and fixing of Reinforced cement concrete (M40 grade )Rectangular precast seater box a size 1000mm X 450mm X 450mm with 30 mm thick wall including the transportation form the anufacture factory to site and placing the seater as directed by Engineer incharge
8
-
-
Supply and fixing of PVC 2000 lit capacities water tank
1
-
-
Supplying and fixing of Manhole Cover SFRC (600 mm x 600 mm) with Frame and labour charges , etc complete.,
2
-
-
Supplying and laying of 83 mm thick Rubber Moulded Hydraulic pressed Cement Concrete Paver Block over the sand filling and compacted with power rammer. The rate includes cost of paver block, cost of sand, labour charges for laying, hire charges for power rammer, transportation, loading and unloading etc. complete and as directed by the Departmental Officers.
1452
-
-
Supplying and fixing of Precast Kerb wall using Plain Cement Concrete of mix 1:2:4 (1 of Cement : 2 of manufactured sand : 4 of Aggregate) for the following thickness using 20mm size hard broken stone jelly the following sizesis given below. The rate including the cost of molding with perforation of size and one side top chamfering as per drawing, labour charges, materials, finishing smooth on exposed surfaces, curing, transporting to the site, lead & lifts fixing in position, etc complete and as directed by the Engineer-In charge. Rate to include all batching plant, mechanical mixing, transporting and placing at all levels, leads, lifts, tools & plants, fuels, all materials, labour charges, wastages , laying, compaction by vibrator, finishing smooth on exposed surfaces, fixing in position, water tight pointing, curing etc. as complete with all respects complying with relevant standard specification, as directed by the Engineer-in-charge.
265
-
-
Providing and fixing Precast slab of 100mm thick in cement concrete 1:2:4 using 20mmthick hard broken stone jelly and Msand includng the cost of rienforcement and fabrication charges, moulding, curing,finishing and fixing in position neatly etc.,complete complying with standard specification and as directed by the departmental officers.
140
-
-
Supplying and Fixing of English Stainless Steel Letters of approved size and finish. Including Leading, Lifting, Scaffolding, Fixing and fixing etc complete., 25cm (10”) Ht
20
-
-
Supplying and Fixing of Government Logo of approved size and finish. Including Leading, Lifting, Scaffolding, Fixing and fixing etc complete.,
1
-
-
Supplying and Fixing of CNC Cutting Foot Ball Logo on Free Standing walls as per the design, details, Size and finish. Including Leading, Lifting, Scaffolding, Fixing and fixing etc complete.,
1
-
-
Supply and fixing of HDPE Spots' Net on existing MS Frame works, with PVC coated aluminium wires. Thickness of net 2.5 mm and size of opening 50mm x 50 mm, Including leading, Lifting, fixing, scaffolding etc complete.
940
-
-
Dismantling the existing steel structures RHS & SHS sections, MS roof sheet, base plate, foundation bolt, Net post , gates etc. Including Labour, machines, leading, lifting and stacking the materials at site .
1
-
-
Out Door Gym
-
-
-
Sky Walker - Single person-1 No, Double Bar/Parallel Bar-1 No, Single Bar-1 no, Exercise Bike-1 No,Push Up Bar-1 No
1
-
-
In Door Gym
-
-
-
Cofit S201 Spin Bike -1 No
Co-Fit MX207 Leg Extension Leg Curl -1 Nos
"INSPIRE FT1 unctional Trainer (Requires 6xw5s). Frame:- Heavy Duty Steel Electrostatic Powder Coat Product Weight:- 725 lbs (329 kgs)
Weight Stack: 2 x 165 lbs (75 kgs) (1:2 ratio for 82.5 lbs per pulley, 85 lbs with 5 lbs Add On Weights) Opt Add-on:- 2 x 165 lbs (75
kgs) ccessiories : Tablet Holder Attachment, Tricep Rope, 2 x Rubber D Handles, Straight Bar, EZ Curl Bar, Ankle Strap, Multi-Function Belt, Sport Handle, 2 x 5lb Add-On Weights, Exercise Booklet Dimensions (LXWXH):-54 x 46x 82 -1 Nos"
Cofit CF-FWI-FID FLAT INCLINE DECLINE BENCH-1 Nos CF-7043-S Co-Fit Olympic Weight Bench-1 Nos Cofit Barbell rack-1 Nos
DBRH 3-TIER DUMBBELL RACK Dimension : WLH : 19 in x 53 in x 34 inches Weight : 89 lbs- 1 Nos
"JL RUBBERISED HEXAGONAL DUMBBELLS 2.5KG (PAIR) - 2Nos
JL RUBBERISED HEXAGONAL DUMBBELLS 5KG (PAIR)- 2 nos
"JL RUBBERISED HEXAGONAL DUMBBELLS7.5KG (PAIR) -2 nos"
"JL RUBBERISED HEXAGONAL DUMBBELLS 10 KG (PAIR)-2Nos"
-
-
-
"JL RUBBERISED HEXAGONAL DUMBBELLS12.5 KG - 2 Nos"
"JL RUBBERISED HEXAGONAL DUMBBELLS 15KG-2 Nos"
"JL RUBBERISED HEXAGONAL DUMBBELLS 17.5KG -2 Nos"
"JL RUBBERISED HEXAGONAL DUMBBELLS20KG - 2 Nos"
"JL OLYMPIC RUBBER COATED PLATES 2.5KG (PAIR)-1 Nos "
JL OLYMPIC RUBBER COATED PLATES 5KG (PAIR)-1 Nos
"JL OLYMPIC RUBBER COATED PLATES 7.5KG (PAIR)-1 Nos"
"JL OLYMPIC RUBBER COATED PLATES 10KG (PAIR)- 1 Nos"
JL OLYMPIC RUBBER COATED PLATES 15KG- 2Nos
JL OLYMPIC RUBBER COATED PLATES 20KG-2 Nos
JL OLYMPIC RUBBER COATED PLATES 25KG- 2 Nos
Olympic Straight Bar 4inch -1 Nos
OB-47 OLYMPIC E-Z CURL BAR 4 FEET-1 Nos OB-60 OLYMPIC STRAIGHT BAR 5 feet -1 Nos
OB-72 OLYMPIC STRAIGHT BAR 6 feet-1 Nos
OLYMPIC BARBELL 7 FT OB86-1 Nos
OC03 OLYMPIC SPRING COLOR -5 Nos
1
-
-
Supplying,Fixing and testing of RO unit with dispenser (80 Ltr per hr) with the folloing specification. 3 Tap Normal Water, Commercial range, Stainless steel 304 storage tank and body, Floor standing type with four leg, automatic filling type.
1
-
-
First Aid Box Complete with all First aid Medicines
1
-
-
PLUMBING WORKS
-
-
-
Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)
2
-
-
Supply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make double flapped seat cover, pan connector with comprising the P- trap/"S" trap, C.P brass hinges and including labour, all fittings, making the required size including cutting the wall, and fixing the flushing cistern properly, redoing the plastering and packing the wall with smooth finish, the side gap between EWC mouth and pan connector to be filled with silicon sealant etc.complete, complying with standard specification and as directed by the Department officers. The quality and make of EWC should be got approved by Concern department Engineer before use on work. complete complying with standard specification and as directed by the Departmental officers
4
-
-
Supplying & fixing in position 15 mm dia brass/ C.P screw down tape (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).
4
-
-
Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work.
6
-
-
Supplying and fixing of indian make white glazed earthern ware flat back urinal of ISI make of (HxWxP :44cm x 31.5cm x 26.5cm) provided with inlet connection using 15mm flexible PVC connection house of suitable length, 15mm CP push cock and 32mm bell mouthed PVC connection waste pipe etc., fixing to the wall in position with necessary teak wood plugs, clamps, screws etc., Rate inclusive for cost of materials labour and transport charges etc., complete (the urinal anf fittings should be got apprioved by the Engineer - In- charge before use on work.
2
-
-
Supplying, laying and jointing CPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing CPVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of CPVC pipes and specials should be got approved by Concern department Engineer before use on work.
-
-
-
Above Ground Level
-
-
-
20 mm nominal dia .
40
-
-
25 mm nominal dia .
70
-
-
32 mm nominal dia .
39
-
-
40 mm nominal dia .
25
-
-
Below Ground Level
-
-
-
32 mm nominal dia .
8
-
-
40 mm nominal dia .
10
-
-
Supplying & fixing in position first quality & approved variety of various dia Gun Metal GateValves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.
-
-
-
25 mm dia .
8
-
-
32 mm dia .
1
-
-
40 mm dia .
7
-
-
50 mm dia .
11
-
-
Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.
1
-
-
Supplying and fixing of mild steel For Supporting System including cost of necessary screws and cost of applying priming coatof paint etc.,
30
-
-
Supplying, laying and jointing PVC pipes using 6 Kg / 10 Kg Pipe of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials and fixing to wall with necessary teak wood plugs, clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.
-
-
-
Above Ground Level
-
-
-
40mm dia
2
-
-
50mm dia
10
-
-
75mm dia
48
-
-
110mm dia
170
-
-
Below Ground Level
-
-
-
110 mm dia
7
-
-
160 mm dia
70
-
-
Supplying & fixing in position C.I.Nahini trap of various sizes with best stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes as directed etc., complete, complying with standard specification (The C.I.Nahini trap should be got approved by the Executive Engineer before use on works ).
13
-
-
Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary brick work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).
3
-
-
Constructing brick masonry manhole with second sort ground moulded (Chamber burnt) bricks in CM 1:5 (one of cement, fivr of sand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate) 20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard specification.
-
-
-
Manhole 600 x 600 x 900mm Deep
8
-
-
Construction of Rain water Recharge well (1200mm dia) as per consultant drawing with necessary connections, (Quotation rate) Earth work-digging the well for recharge well supply and installation of Reinforced concrete Rings -4 feet OD & 1 feet Height 75 MM Thick - 10 no's supply and installation of einforced concrete slab 4 feet in dia. 200 mm thick, and 25 mm perforated 8 mm mild steel rods used for reinforcement-1" Perforated - 1no's supply and installation of Reinforced concrete closing slab 75 mm thick, 8 mm mild steel rods used for reinforcement with 600mm x 600mm Square HEAVY DUTY PERFORATED manhole cover Filtration Media Installation For recharge Well Unit 40 mm crushed stones-0.5cum, 20 mm crushed stones- 0.5cum, Brick Bats-0.5cum,fine sand 0.5 cub mtr Mixture of Brick Bats Shifting of excavated earth to the approved/authorised dumping yard as directed by the authorities/Site in charge. Drilling a bore well-200mm dia by high speed compressor-4MTRS, supply and installation of 110mm PVC PIPE PN-6-4 rmtr, 110mm PVC PIPE PN-6 Perforated with 10 mm Zigzag holes to easy percolate the water-4 mtr, 12mm Gravel Packing between bore well hole and PVC pipe and Inserting into the Bore Well- 4 mtrs. supply and installation of 180GSM Gio-fabric sheet to cover V-Wire screen, supply and installation of V WIRE SCREEN- 0.75 mm Slots. SS-304 Material -0.5 mtrs Height 6" diameter Shifting of excavated earth upto 1000mtrs as directed by site in charge (the well sholud be got approved by the concern department Engineer before use on works)
2
-
-
Supplying and fixing of Stop cock Fitting including cost of fittings labour for fixing etc., complete complying with relevant standard specification and as directed by the departmental office, (The quality of fittings should be got approval from Executive Engineer before use).
3
-
-
Supplying and fixing of C.P. Shower arm 190mm long (Light body) with Shower rose and Special shower with wall mixture fitting including cost of fittings, labour for fixing etc., all complete and as directed by the departmental officers, (The quality of fittings should be got approval from Executive Engineer before use).
4
-
-
Supplying and fixing of Angle cock Fitting including cost of fittings labour for fixing etc., complete complying with relevant standard specification and as directed by the departmental office, (The quality of fittings should be got approval from Executive Engineer before use).
12
-
-
Supplying and fixing Aluminium towel rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plug and CP screws etc., complete complying with standard specification and as directed by the Departmental officers.
7
-
-
Supplying and fixing new one of best approved quality Porcelain soap tray of size 150 x 100 mm / Porcelain soap dish of size 150x150x 50mm including cost of rowel plug, brass screws etc., complete complying with standard specification and as directed by the Departmental officers.
10
-
-
ELECTRICAL WORKS
-
-
-
Supply, Installation, Testing and Commissioning of cubicle type floor mounting switch board comprising of the following, the board shall be fabricated as per the detailed specification enclosed Outdoor Panel
Incoming: 1 No: 200A TPN 25kA MCCB, 1 set - Digital Combined meter (Having the parameters of Ammeter,Voltmeter and KWH meter)., 1 set - LED type RYB,ON,OFF,TRIP indication lamps., 1 set -200 /5A CT CL 1.0 10VA Outgoings:
10 Nos - 63A 16KA TPN MCCB WITH DUAL SOURCE ENERGY METER WITH NECESSARY CONNECTED ACCESSORIES With necessary Aluminium busbars, interconnection providing Digital combined meter, phase indication lamp, fuse and switch control etc. in the incomer.
Note:-The panel should be having provision to compatibility with IBMS BUS BAR RATING:
200A TPN 25KA for 1 sec. Aluminium bus bars (Current Density not less than 0.8A/Sq.mm.) with colour coated heat shrinkable PVC sleeves with DMC/SMC bus bar supports and suitable earth bus. Earthing : 50 x 6mm Aluminium flat
The panel shall be made as per IS 61439 compliance and as per latest NBC 2016 & ECBC compliance ( Out door type ) For all items in this section, the rate includes necessary supports as required at site. No extra payment will be made for the same. Rate shall inclusive of factory witness test and all accessories, breakers , control wiring, models has to be followed as per in the technical specification
1
-
-
Supply, erection, earthing, testing and commissioning of the following MCB DB's IP 42 / Weather proof Protection Double Door type with powder coated including all interconnections and accessories like bolts, nuts and associated civil works, etc; The rate shall be inclusive of necessary cable/conduit adopter boxes for IN and OUT wiring. 4 W TPN Outdoor DB - ( External Lighting - Outdoor type with suitable Pedestal frame with lock and key )
Supply,Erection, Testing and Commissioning of the following Type feeder pillar enclosure with MCCBs / MCBs /ELCBs, / Timer and contactor manufacturer's sheet 16SWG enclosure for with provision for cable entry boxes, with Outdoor application as specified Protection, fixed on the floor with all interconnections and accessories, pedestal frame with concrete grouting or suitable to fix at concrete plinth as per the Corporation/ Highway department requirement.
Incomer 63 A TPN MCCB with Timer control On/OFF
32 DP MCB + ELCB - 12 Nos :
4W TPN Outdoor DB. The rate includes necessary connected minor civil works if required and necessary supports as required at site. No extra payment will be made for the same. The rate shall be included to fixing the DB where as in concealed / or open as per site condition.
1
-
-
External Lighting Luminaries
-
-
-
The warrantee for 5 years should be provided for all lighting luminaries including LED's and drivers.
-
-
-
Supply, fixing, testing and commissioning of the following lighting luminaires including all necessary accessories like electronic choke, starter, holder, control gear, driver units, lamps , fixing accessories, down rod, chain suspender, hooks, supporting arrangements, clamps, ms angle supports, lamps, mounting bracket, flexible cable connection from the junction/connector box to the light fixture , foundation of poles, high mast , the rate includes necessary connected minor civil works if required and necessary suitable loop in loop out connector,joints,glands supports as required at site. No extra payment will be made for the same.
-
-
-
Supply, Installation, Testing & Commissioning of 300W LED Floodlight Fitting with necessary GI bracket / MS with powder coated bracket and all necessary fixing accessories. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. Colour Temperature should be 5700°K ±300°K and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be 300W with lumen package as per requirement. The Luminaire should have a 20 KV /10 KA SPD duly bolted in the Luminaire . The SPD should be able to sustain a minimum 15 hits of 10KA rating i.e. Total of 45 hits across all the three modes as per IEEE 62.41.2. The Luminaire should have a breather to ensure that air balance inside and outside of the Compartment .The luminaire should be of Class B Serviceability. The wattage of each LED should be greater than 1 watt and less than 3 Watt. Only high power Single white LED chip with ceramic based suitable for outdoor use is allowed. Multi Chip , array multi die , mid power ,Integrated arrays and COB’s are not permitted. Crompton CAT REF : - CFS-501-350-57-30D-HL3-GL/NBK/ Equivalent.
40
-
-
Supply and installation of 9M Mini high mast suitable for 50 m/sec wind speed, with 1.5 mtr Dia Semi Circular frame suitable to install 3 nos of 300W luminaries with counter weight arrangements , mounting clamp and brackets etc. Internal wiring material shall be from JB to individual luminaire & MCB in base compartment are included and are a part of installation, foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. The foundation shall be with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour, GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour, wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 2.5 sq. mm, lugs, MCB and all labour. The rate is inclusive of Freigh Charges, Insurance Cost, Loading and Unloading Charges.
Contractor to get structural approval from the Civil team for the highmast foundation
8
-
-
Supply, erection, testing and commissioning of 8 mtr free standing Single arm bracket 8 sided octagonally continuosly tapered strcutured pole with base plate of size 300 x300 x 12mm as per IS-875 along with 120W LED fitting with following specification. Bottom pole dia -130mm Top Pole dia -70mm Thickness of pole -3mm. The pole should be hot dip galvanized confirming to BESN ISO - 1461 with thickness of 65 Micron. Construction of pillar accommodating MCB and switch housed in weather proof box including wiring to the light fittings with 2 runs of 2.5 Sq.mm PVC insulated copper conductor, supplying and fixing 4 way 30 A rated terminal block loop in loop out cable arrangements coil earthing etc. the rate shall included for cable in and out throught pipe.The pole shall be as required by the Engineer in charge and complete with suitable pressure die cast aluminum housing also adhering to the above said specifications.Note:-The rate shall be quoted for complete set of Pole ,,Base foundation,Anchor fastener,internal wiring,earting materials,6A DP MCB box and all necessary accessories and civil cost etc should be provided as suitable to the requirement
16
-
-
The cable rack shall have runners rugs of suitable size, horizontal elbow, vertical elbow 90 Deg. Up vertical elbow 90 Deg. Down, re-deep, coupler plates, materials. The cable racks shall be suspended from ceiling supported from side walls in columns etc. with adequate size supporting angles / channels with fastners, welding, anchor bolts, nuts etc. The rack shall have suitable cable clamping arrangements etc.' Cable Tray /ladder should be powder quoted as match with ceiling colour as per PWD requirements.
The rate shall inclusive of necessary Wedge anchors theaded rods,nuts & bolts, making clamp for rcc roof fix / perlin/Truss, cable tray clamps etc,(8 mm threaded rod supports shall be provided at not more than 2 mtr center to center and as per site requirement )
-
-
-
Perforated type
-
-
-
Supply and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height
10
-
-
Supplying and fabricating of MS structural steel supports for various applications using U channels, MS angle iron, bolts, nuts, anchor bolts etc., required for the work, cut to the size, bent to shape, welding, grouting etc., complete. Supports shall be powder coated with required colour for different system as mentioned above.
50
-
-
Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
30
-
-
Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
50
-
-
Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
415
-
-
Supply and Laying of 4C x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
625
-
-
Supply & laying of 3 x 6 sq.mm. PVC Insulated & FRLS Multi Core Round Sheathed Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade RA upto 1100 Volts Copper armoured cable in cable trench / clamping wall / pvc duct with suitable clamps.
100
-
-
Supply and fixing of brass cable gland for the following size . PVC LTUG aluminium armoured cable with earth connection. (Alu. Sockets for alum. Cable)
-
-
-
3-1/2 x 120 sq.mm. PVC LTUG armoured cable.
2
-
-
3-1/2 x 35 sq.mm. PVC LTUG armoured cable
2
-
-
4 x 16 sq.mm. PVC LTUG armoured cable
16
-
-
4Cx 10Sq.mm..AL Arm.XLPE FRLS Cable.
30
-
-
3Cx 6Sq.mm..AL Arm.XLPE FRLS Cable.
2
-
-
Supply and providing cable end termination of the following size PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete (copper sockets for copper cables and Alu. Sockets for alum. Cable)
-
-
-
3-1/2 x 120 sq.mm. PVC LTUG armoured cable.
2
-
-
3-1/2 x 35 sq.mm. PVC LTUG armoured cable
2
-
-
4 x 16 sq.mm. PVC LTUG armoured cable
16
-
-
4Cx 10Sq.mm..AL Arm.XLPE FRLS Cable.
30
-
-
3Cx 6Sq.mm..AL Arm.XLPE FRLS Cable.
2
-
-
Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp
4
-
-
Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection
15
-
-
Supply and run of 1 of No.8 SWG GI wire for earth connection r wire for DB earthing and other equipment body earthing as required.
15
-
-
Wiring, testing and commissioning of 2Rx1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V PVC conduit pipe concealed wall and ceiling with PVC accessories GI metal back box and 6A modular switch & 6A modular Socket ( board itself Point ) in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, for making good of the concealed portion with suitable colour for PVC concealed point
50
-
-
Supply and fixing of 7 segment 6 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only
1
-
-
Supply, run, testing and commissioning of 2Run 2.5 sqmm and 1R of 2.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable Pvc conduit pipe on concealed wall and ceiling with continuous earth wire connection with painting of suitable colour.
270
-
-
Supply and fixing of manufacturer's GI metal back box and 3 nos of 6A modular switch, 3nos of 6A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
19
-
-
Supply and fixing of manufacturer's GI metal back box and 16A modular switch, 6/16A 3 pin combined modular type wall socket in flush with wall mounted on poly carbonate front plate with switch mounting metal parts, in flush with wall.
7
-
-
Supplying, installation, testing and commissioning of 300 mm (12") sweep (heavy duty) AC exhaust fan complete with provision of holes in the wall including all required accessories.
8
-
-
Supply, Installation, Testing & Commissioning of 10W LED bollard light fittings Fitting. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be require with lumen package as per requirement. Crompton CAT REF : - LBLA3-10-CDL / Equivalent-(LANDSCAPE LIGHT). rate shall inclusive of necessary joint kit,glands,etc for loop in/out connection suitable to outdoor application .
10
-
-
Supply and clamping of 3c x 2.5 Sq.mm PVC insulated SC sheathed flexible copper cable of 1100v grade in existing cable trays and in suitable MS Conduit in wall and Ceiling with connected MS Saddles and accessories as directed by the departmental officers.
40
-
-
Supply and fixing of thermoplastic loop - in and loop out boxes with lid of dimension min 104X104X70MM with 20A connector. shorting link 2 way necessary and along DIN rail terminal block. The Junction Box shall be insulated and made out of high grade thermoplastic. The JB shall be environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid& anti corrosive. The JB shall be rated for Degree of Ingress Protection IP 65 in accordance with IEC 60529.
2
-
-
Supply and fixing of brass cable gland for the 3C x 2.5Sq.mm PVC insulated SC sheathed flexible copper cable with earth connection. (Copper sockets for copper cables).
2
-
-
Supply and providing cable end termination of 3C x 2.5Sq.mm PVC insulated SC sheathed flexible copper cable size PVC insulated copper flexible cable cable with necessary copper sockets by crimping etc. with electrical connection complete.
2
-
-
Supply, installation, testing and commissioning of 18 W LED DOWN LIGHT FITTING with IP55 cool day light suitable for pole mounting, made out CRCA powder coated body, aluminium reflectors, poly methyl meth acrylate (PMMA) diffuser, glare free light, including electronic drivers, day light colour LED lamps, inter connecting wiring with suitable fixing clams, hooks as required including accessories all inclusive.
60
-
-
Supply, run, testing and commissioning of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of Grade in suitable MS Conduit pipe on wall and ceiling with continuous earth wire connection with painting of suitable colour.earth wire connection of 2.5 sq.mm wire PVC insulated SC unsheathed Cu.Conductor of 1100V Grade and making good of the concealed portion with suitable colour (for Bus bay fitting, 15 Amps socket, 20 Amps AC socket)
55
-
-
Supply and fixing of 20A DP Switch With indicator(2M) 20Amps 3 Pin Socket With Shutter Type , combined flush type wall socket FOR Split AC unit UNIT in switch along with moulded front plate in G.I anodised manufaturer's mounting box fixed flush with the wall complete with all accessories as required as per the site condition.
6
-
-
Supplying, installation, testing and commissioning of 1200 mm (48") sweep AC ceiling fan complete with out modular type stepped electronic 300W regulator, with 1 metre down rod with all required accessories.including point wiring ( 5 STAR )
10
-
-
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End
1
-
-
Supply, Installation, Testing & Commissioning of 200W LED Floodlight Fitting with necessary GI bracket / MS with powder coated bracket and all necessary fixing accessories. The Light Fitting should be powder coated with high pressure die-cast aluminium LED housing. And the LED fixed on die-cast aluminum heat sink for proper thermal management. Colour Temperature should be 5700°K ±300°K and the operating voltage range 140 – 270V AC, provided with open and short circuit protection and input surge voltage protection.The driver should be Constant voltage constant current SMPS Protection of Fitting should be IP 66. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95. System consumption should be 200W with lumen package as per requirement. Crompton CAT REF : - CFS-501-200-30-60D-SL-GL-NGG / Equivalent
2
-
-
Supply and installation of 100A metering Cubical Outdoor double door type floor or wall mounted as per tangedco requirements, 100A Fuse Cutout , 125A TPN disconnector switch 200 A Copper neutral link , suitable to connect 120 -185 Sq.mm Aluminium armoured cable , copper earth links and studs, Space provision for the energy meter , RYB indication lamps, internal wirings, Digital voltmeter and Ammeter and other required accessories for the complete operation as per the Tangedco requirements. Necessary approval to be obtained from Tangedco before procurement. (Supply & Erection)
1
-
-
CCTV
-
-
-
Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output HDMI1 / VGA1 outputs provided HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback.
1
-
-
Supply of 8MP, Internet Protocol fixed BULLET CAMERA with following specification:
●1/2.5" Progressive Scan CMOS, ● 3840 × 2160 @15 fps,2.8/4 mm fixed lens,01 lux @ (F1.2, AGC ON), 0.028 lux @(F2.0, AGC ON), 0 lux with IR, H.265+, H.265, H.264+, H.264, 2 Behavior analyses ( Line crossing detection, intrusion detection)
● Face Detection ● 120dB WDR, ● BLC/3D DNR/ROI, IP67 complied
●On-board Storage - Built-in micro SD/SDHC/SDXC card slot, up to 128 GB,
● Shutter Speed 1/3 s to 1/100,000 s, ● 3-Axis Adjustment Pan: 0° to 360°, tilt: 0° to 100°, ● rotate: 0° to 360°, 2.8 mm, ● horizontal FOV: 102°, vertical FOV: 53°, diagonal FOV: 124°, ●Lens Mount M12 ● IR Range I5: up to 50 m, ● Image Settings Rotate mode, saturation, brightness, contrast, sharpness adjustable by client software or web browser, ● Power Consumption and Current-12 VDC, 0.7 A, max. 7.5W PoE: (802.3af, 36V to 57V), 0.3 A to 0.2 A, max. 9W
● Camera out fitted with metal housing so as to prevent the lens from damages during physical abuse. (Make: Dahua/Panasonic)
14
-
-
Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR
h) True colour generator
i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote
p) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung).
1
-
-
Supply and OFC patch of OFC Single mode Media Convertor with configaration charges etc.,
4
-
-
Supply and fixing of outdoor 4X6 PVC box with 102mmX77mmX102mm with all fixing accessories.
14
-
-
Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)
IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-T
IEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.
250
-
-
Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.
28
-
-
Supply and fixing of 3nos 6A, 5 pin socket controlled by 3 nos 6A switch, modular type in suitable size Modular plate and enclosed in a 9 Module Manufacturer's Box complete with interconnections and earthing rate should include all the necessary labour charges to complete the work for NVRs and Monitors.
4
-
-
Supply and run of 2 x 1.5Sq.mm PVC and SC unsheathed copper cable of 1100v grade in suitable PVC pipe in wall and Ceiling with connected PVC accessories with continuous earth connection of 1 of 1.0Sq.mm copper cable.
150
-
-
Supply and laying of armoured, Single mode, Thermoplastic Tape Inner Sheathed, PVC type sheathed 6 core Optical Fibre Cable with unique fiber excess length control method provides the cable with excellent mechanical and environmental properties and Cable - 2 Embedded FRP provides tensile strength & Anti-buckling properties. It is processed with Filling jelly - Thixotropic jelly to prevent Water ingress in loose tube.
500
-
-
Fixing and Termination of Optical Fibre Cable Single Point ( Point to Point ) Splicing and arrangement charges.
28
-
-
Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK) \
4
-
-
Supply and fixing of Out Door Wheather Proof Box 2Ft x 2Ft
4
-
-
Supply and fixing of OFC PVC Black Colour Box 1'x 3/4' x 2"
4
-
-
Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with fan extra for the above rack.
1
-
-
Supply and fixing of 2 feet CCTV Camera Stand with attachment fittings as follows: * Weather heads and couplings * Cabinet mounting fittings, plates, brackets as needed. * Reinforced couplings for wire entrances to cabinets
14
-
-
1KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) CAPACITY - SYSTEM WITH BATTERY - 2 HOURS BACK-UP.
1
-
-
Supply,Erection of 8m Free Standing Round structured pole with base plate of size 300x300x12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70 mm Thickness of Pole - 3 mm The pole should be hotdip galvanized confirming to BESN ISO 1461 with thickness of 65 Micron. with foundation Charges
14
-
-
Supply and Laying in position the best quality and 40mm dia HDPE pipes of ISI mark etc., with standard specification.
500
-
-
PA SYSTEM
-
-
-
Supply, Installation,Testing & commisioning of 40 watts 2 way high efficiency, high fidelity, long throw IP65 weather proof P.A Music Horn speaker. It combines the high efficiency of horn with wide frequency response.Music horn is weather protected and UV protected ABS plastic housing combines with the feature of easy poertap selection on a terminal strip with a two core cable.It has impedence of 250/500/1k/2k ohm with frequency response of 120-16000 hertz. (Make:Ahuja AMH402T/Bosch or its equivalent)
1
-
-
Supply. Installation, Testing & Commissioning of Amplifier for PA system with RMS output (actual) 480 W as per the technical specification with all mounting accessories etc.
1
-
-
Supply & laying of (30/0.25)1.5 sq. Mm 2 core sheathed flexible copper cable with PVC pipe & all other accessories.(Make:finolex/havells/its equivalent)
1
-
-
Supply & Installation of custom built M.S Powder coated wall mounting Audio rack with Lock & key for housing of Amplifier & player/Recorder conforms to EIA-310,IEC-60297 and able to withstand the load of 40kg with welded construction made up of CRCA steel with suitable height, width and depth.
1
-
-
Supply,Installation, Testing & Commisioning of Cordless mic UHF model.(Make:-ACM66 Ahuja/bosch/its equivalent)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements