Central Electrochemical Research Institute Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Central Electrochemical Research Institute - CECRI Tender
Civil And Construction
Building Construction
Eprocure
Opening Date19 Oct 2022
Closing Date28 Oct 2022
Tender Amount₹ 94,78,559
Costs
EMD
₹ 1,89,571Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CSIR_132565_1Bid Award Id
ViewTender No
CSIR CECRI NIT No 13/2022Tender Authority
Central Electrochemical Research Institute ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Repair and Renovation works for Hydrogen Plant at CSIR-CECRI Karaikudi
BOQ Items
Trimming up of tree branches which is affecting on the building girth upto 60cm including cutting of trunks and branches, removing the same and stacking of serviceable material and disposal of unserviceable material lead upto 1000m as directed by the Engineer-in-charge
36
-
-
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.
-
-
-
Beyond 30 cm girth upto and including 60 cm girth
10
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
15
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
2
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
3
-
-
Of area beyond 3 sq. metres
4
-
-
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
33
-
-
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
-
-
-
Asbestos Cement sheet
821
-
-
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
-
-
-
Channels, angles, tees and flats
10766
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
105
-
-
Removingold unnecessary clamps , angles ,curtain rods and other unwanted minor parts projected in walls & roofs. the rate inclusive of all lift and leads including necessary scaffolding as directed by the Engineer-in-charge.
1
-
-
Removing and placing the existing wooden furnitures and other movable items after executing the work including proper placing, cleaning wherever & whenever required as directed
1
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos emulsifiable concentrate of 20%
20
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 ce- ment : 2 coarse sand) to the full depth of the hole :
-
-
-
With Chlorpyriphos E.C. 20% with 1% concentration
221
-
-
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
-
-
-
With Chlorpyriphos E.C. 20% with 1% concentration
108
-
-
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
31
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil.
51
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
3
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
49
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)
28
-
-
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources)
4
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
29
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
cement mortar 1:4 (1 cement : 4 coarse sand)
358
-
-
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 coarse sand)
918
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
2721
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
404
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
208
-
-
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with Non -decorative lamination on both sides
72
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
46
-
-
With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
52
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 150mm
24
-
-
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
12
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
Twin rubber stopper
12
-
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
8
-
-
Providing and fixing zinc alloyed (white powder coated) touch lock for aluminium sliding window with necessary screws etc. complete.
44
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
59
-
-
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Suspended floors, roofs, landings, balconies and access platform
223
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
164
-
-
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.
-
-
-
12 mm cement plaster
693
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
103
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
89
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
Water thinnable cement primer
693
-
-
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
-
-
-
One or more coats on old work
1399
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
471
-
-
White washing with lime to give an even shade :
-
-
-
Old work (two or more coats)
1301
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
643
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
558
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
17
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
-
-
-
Bend 87.5°
-
-
-
110 mm bend
6
-
-
Shoe (Plain)
-
-
-
110 mm Shoe
6
-
-
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :
-
-
-
All kinds of soil
-
-
-
Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
10
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
20 mm nominal dia Pipes
60
-
-
25 mm nominal dia Pipes
96
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
25 to 40 mm nominal bore
1
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including using of rack bolts for fixing wherever required White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
4
-
-
Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
2
-
-
Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level whiteP.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls andfloors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size580x440 mm with integral type foot rests
2
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
16
-
-
Providing and fixing PVC multi trap (Nahini trap) with jalli including necessary fittings as directed by the Engineer - in- charge. 100mm dia
4
-
-
Providing and fixing CP two way tap of approved quality as directed by the Engineer-in-charge 15mm nominal bore
2
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
150x10 mm
28
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
250x16 mm
10
-
-
Providng and fixing precast reinforced cement concrete rings with 25mm thick of size 450mm dia & height 300mm in existing masonry walls with neat finishing as per the direction of Engineer-in-charge.
6
-
-
Providing and fixing mirror of superior glass (of approved quality) andof required shape and size with plastic moulded frame of approvedmake and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
4
-
-
Providing and fixing SS towel rail complete with fixed to wooden cleats with CP brass screws of approved quality as directed by the Engineer -in -charge. 600 mm long towel rail
8
-
-
Providing and fixing CP coated health faucet 1.0mtr length of approved quality with necessary fittings and screws as directed by the Engineer - in -charge
2
-
-
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
20
-
-
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.
-
-
-
30 mm thick plain PVC door shutters
5
-
-
Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including necessary opening for drin pipes and neat finishing complete as per standard design as directed.
5
-
-
Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
2
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
5569
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
120
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
Area of slab over 0.50 sqm
6
-
-
Providing and fixing white vitreous china laboratory sink includingmaking all connections excluding cost of fittings :
-
-
-
Size 600x450x200 mm
4
-
-
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
4
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
10
-
-
Providing and fixing 110 mm dia PVC pipes (4kg/cm2) (Finolax or equivalent ) complete with necessary fittings as directed.
40
-
-
Providing and fixing 90 mm dia PVC pipes(4kg/cm2) (Finolax or equivalent ) complete with necessary fittings and clamps including cutting and making good the walls etc.
18
-
-
Providing and fixing 63 mm dia PVC pipes(4kg/cm2) (Finolax or equivalent ) complete with necessary fittings and clamps including cutting and making good the walls etc.
54
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.
90
-
-
Providing and fixing granite of 18 mm thick gang saw cut, mirror polished (double side), premoulded and prepolished, machine cut for urinal spearator and similar locations of required size (1300mm x 600mm), approved shade, colour, texture and fixing the walls as per site condition, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade
2
-
-
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
2
-
-
Providing and fixing CP brass urinal half turn valve of aprroved quality as directed by the Engineer-in-charge. 15mm nominal bore
2
-
-
Providing and fixing Aluminium roof turbine gravity ventilator fan with following specifications, MOC of vanes, top plate & Bottom of ring made up of aluminium, Bearing with Self Lubricated - 2 Nos, Center Shaft with M.S 12mm dia with Electro Zinc Plating, Thickness of 0.5 mm , Turbine Height 350 mm , Blade of size 415x63x0.50mm ,42 Nos with 45 degree angle and triple Groove - press formed Blades, centre pipe having aluminium, centre width of ventilator 715mm, Dia of top plate 500mm, Dia of top ring 650mm, Dia of Bottom ring 610mm, Rivets - aluimium rivets, with suitable fixing arrangements and ensure leak proof in the ceiling as directed by the engineer - in -charge.
6
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using flats 30x6mm for diagonal braces and central cross piece
26
-
-
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
7
-
-
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
Upto 5mm depth and 5 mm width
265
-
-
Supplying and fixing etching sticker for glass doors/ winows /glass partition including required design as directed by the Engineer-in-chage.
39
-
-
Cutting holes up to 30x30 cm in walls including making good the same:
-
-
-
With common burnt clay F.P.S. (non modular) bricks
10
-
-
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 6mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits.
-
-
-
50 mm thick
32
-
-
Closing the minor holes upto 0.10sqm area in existing mansonry wallls with necessary plastering and neat finishing as directed by the Engineer-in-charge
20
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
8
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
452
-
-
Providing and fixing precoated galvanised iron profile sheets 0.50mm thick or below. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Precoated galvanised iron profile sheets will be supllied by the department)
432
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
167
-
-
(a) Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium (c) composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
18
-
-
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.
299
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (MS tubular sections will be supplied by the Department)
600
-
-
Providing and fixing Unplasticized Polyvinyl Chloride (UPVC) pipes, having thermal stability for hot & cold water supply including all UPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step suitable solvent and testing of joints complete as per direction of Engineer in Charge. 50mm UPVC pipe
120
-
-
Providing and fixing UPVC ball valve of approved quality, High or low pressure, with plastic floats complete as directed by the Engineer -in -charge. 50 mm nominal bore
3
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
70
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
160
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
625
-
-
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
500
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
200
-
-
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
25
-
-
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
125
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
200
-
-
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
2 Pair
250
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
75
-
-
25 mm
50
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
100 mm X 100 mm X 60 mm deep
5
-
-
150 mm X 150 mm X 60 mm deep
5
-
-
200 mm X 150 mm X 60 mm deep
5
-
-
200 mm X 250 mm X 60 mm deep
5
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
5
-
-
15/16 A switch
135
-
-
3 pin 5/6 A socket outlet
5
-
-
6 pin 15/16 A socket outlet
135
-
-
Telephone socket outlet
10
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
25
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
6 Module (200mmX75mm)
40
-
-
12 Module (200mmX150mm)
15
-
-
Supplying and fixing brass batten/ angle holder including connection etc. as required.
5
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
75
-
-
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
100
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
4
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
4
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
20
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 +1 2), Double door
2
-
-
8 way (4 + 24), Double door
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
75
-
-
Triple pole
4
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
25
-
-
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
For 4 way, Double door TPN MCBDB
2
-
-
For 8 way, Double door TPN MCBDB
2
-
-
Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.
-
-
-
450 mm width X 50 mm depth X 2.0 mm thickness
70
-
-
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
30
-
-
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
140
-
-
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
1
-
-
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
Upto 35 sq. mm
100
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
Upto 35 sq. mm
75
-
-
Above 35 sq. mm and upto 95 sq. mm
25
-
-
Above 95 sq. mm and upto 185 sq. mm
200
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
25
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
25
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
70
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
70
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3Y X 70 sq. mm (38mm)
5
-
-
3Y X 150 sq. mm (50mm)
6
-
-
4 X 16 sq. mm (28mm)
4
-
-
4 X 35 sq. mm (32mm)
4
-
-
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
125
-
-
Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
15
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
120
-
-
120 mm dia (OD-120 mm & ID-103 mm nominal)
350
-
-
Providing and fixing M.S. Fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required. (DSR Civil-2014, Item no. 10.17)
15
-
-
Providing and fixing circular/ Hexagonal GI box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick GI sheet with its top surface hacked for proper bonding, top lid shall be screwed into the GI box by means of 3.3 mm dia round headed screws, one lock at the corners, clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR Civil-2014, Item no. 10.18)
15
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
15
-
-
High Bay LED Fitting: Supply and fixing industrial indoor type High Bay LED energy efficient fitting, 100 watts,10000 lumens with wide beam angle and suitable driver of wide voltage range to be installed in the existing RCC roof with required accessories such as Clamps of adequate size and strength & SS metal chain as required to house the fitting satisfactorily to provide uniform lighting as per standards along with interconnection with adequate rated, 3C x TRS copper flexible cables etc as required in all aspects as per site condition. Similar to JV Luker's AVIOR/Philips Model No: LHBY100/BY515P LED 150S 5700 NB PSU GR LED or Equivalent as approved by department.
10
-
-
High Bay LED Fitting: Supply of industrial indoor type High Bay LED energy efficient fitting, 100 watts,10000 lumens with wide beam angle and suitable driver of wide voltage range as required. Similar to JV Luker's AVIOR/Philips Model No: LHBY100/BY515P LED 150S 5700 NB PSU GR LED or Equivalent as approved by department.
3
-
-
2x2 LED fitting: Supply and fixing recessed mounting 2x2 LED energy efficient fitting, 4200 lumens, around 40 watts,WW/WH along with suitable driver with ripple less than 5% for flicker/glare-free light in the existing false ceiling with required accessories such as chain/string for supporting the fittings firmly in the ceiling including interconnections as required. Similar to Philips Full Glow G6 Model No : RC380B LED 42S-6500/4000 G6 l60 W60 PSU OD or Equivalent as approved by department.
31
-
-
2x2 LED fitting: Supply of recessed mounting 2x2 LED energy efficient fitting, 4200 lumens, around 40 watts, WW/WH along with suitable drive rwith ripple less than 5% for flicker/glare-free light as required. Similar to Philips Full Glow G6 Model No : RC380B LED 42S-6500/4000 G6 l60 W60 PSU OD or Equivalent as approved by department.
4
-
-
Square/Round LED down lighter : Supply and fixing recessed mounting Square Down lighter LED energy efficient fitting,1000 lumens, 10W, WW/WH glare-free light along with suitable driver in the existing false ceiling with required accessories for mounting the fittings firmly in the ceiling including interconnections as required. Similar to Philips Green LED Ultima Square/Round Model No : DN0978 LED 10S-6500/3000 PSU or Equivalent as approved by department.
23
-
-
Square/ Round LED down lighter : Supply of recessed mounting Square Down lighter LED energy efficient fitting,1000 lumens, 10W, WW/WH glare-free light along with suitable driver as required. Similar to Philips Green LED Ultima Square/Round Model No : DN0978 LED 10S-6500/3000 PSU or Equivalent as approved by department.
7
-
-
4 Ft Industrial LED Batten: Supply of standard 4 feet industrial indoor 40W,LED batten having high efficiency, flicker free suitable for wall, surface and conduit mounting system with required accessories as required. Similar to Philips Endura LED Next Model No. BN308CLED40S-6500 or Equivalent as approved by department.
23
-
-
4 Ft LED Batten: Supply of 4 feet extruded aluminium LED batten indoor type 22W, having high efficiency, flicker free suitable for wall, surface and conduit mounting system with required accessories as required. Similar to Philips Endura Smat Bright Model No. BN021 LED 22S PSU CW GR or Equivalent as approved by department.
28
-
-
2 Ft LED Batten: Supply of 2 feet extruded aluminium LED batten indoor type 12W, having high efficiency, flicker free suitable for wall, surface and conduit mounting system with required accessories as required. Similar to Philips Endura Smat Bright Model No. BN021 LED12S-6500 PSU GR or Equivalent as approved by department.
8
-
-
LED ML Fitting : Supply of LED mirror light fitting of 10 W, having high efficiency, wall/ surface mounting with suitbale driver of wide voltage range as required. Similar to JV Luker's YOTA F1 Model No.LMR 10 or Equivalent as approved by department.
2
-
-
LED Hanging Light : Supply of LED indoor hanging light of 20W, WW, having high efficiency, wall/ surface mounting with suitbale driver of wide voltage range as required. Similar to JV Luker's AKIRO P1 Model No.LHL 305 or Equivalent as approved by department.
1
-
-
LED Outdoor Wall Light : Supply of LED IP 54 outdoor wall light of 9W, WW, having high efficiency, wall/ surface mounting with suitbale driver of wide voltage range as required. Similar to JV Luker's ORA OW2 Model No.LOO 919 or Equivalent as approved by department.
2
-
-
LED Outdoor Bulkhead Light : Supply of LED IP 54 outdoor bulk head light of 20W, having high efficiency, wall/ surface mounting with suitbale driver of wide voltage range as required. Similar to JV Luker's BOXY ECO 4 Model No.LBKSQ 20 or Equivalent as approved by department.
8
-
-
Cast Iron Body Earthing : Providing cast iron pipe earth pit with 2000mm long 100mm dia 7mm thick cast iron pipe including excavation, refilling with salt, charcoal, natural soil and providing masonry cover etc.,complete in all aspects as required.
2
-
-
"MV Panel Hydrogen plant facility : Supply, Erection Testing and commisioning of floor mounting cubicle type MV Panel fabricated out of 14 SWG CRCA sheet steel, complete with required Ms frame of adequate strength, painintg etc., conforming to the enclosed specifications and comprising the following main bus bar of 400 A, TPN, Electrolytic copper bus, 3 phase, 25 x 5 mm per phase, 25x5 mm copper bus bar for neutral and 2Runs of 20x3mm copper bus all around the panel for earth, [Please refer enclosed provisional drawing and the panel shall be conforming to IE rules, IS:8623/93,CEA & CPWD guideance] etc., as required. INCOMMER: 1 No of 400A, TP&N, 415V,36KA 50Hz, MCCB with adjustable thermal magnetic O/L & S/C protection, Ics=100% Icu, along with suitable front operted handles,spreader links and phase barriers complete in all aspects simialr to DPX3 630 series of Legrand Make or Equivalent in Schneider /ABB/MG/Siemens subject to the approval of the department. 1 no. of Multifunction energy meter to be mounted in the panel for measuring the electrical parameters (VIFPE) as required.Make- L&T,AE, HPL- Socomec, Krykard or Equivalent as approved by the department. 1set of square flush type instrument meters confirming to IS:1248 for accuracy and shall be suitably protected with MCB/Fuses as per standards. MISC' voltmeter scaled (0-600V) and Ammeter of 600A range.Make : AE/IMP/MECCO 1 set of voltmeter and Ammeter selector switch 3 nos of indication lamps of LED type with toggle switch. 3 nos of potential fuses and CT's as required. 1 set of blank gland plate OUTGOING: 10 Nos 100A, TP&N, 415V,16/18KA 50Hz, MCCB with adjustable thermal magnetic O/L & S/C protection, Ics=100% Icu, along with suitable front operted handles,spreader links and phase barriers complete in all aspects simialr to DPX3 160 series of Legrand Make or Equivalent in Schneider /ABB/MG/Siemens subject to the approval of the department. Note: All the incoming units are to be provided with door interiors, phase barriers and protection guards ( on the incoming side) the non conducing metallic parts of the switch gear shall be double earthed. All interior tappings & connctions shall also be electrolytic copper.Incomer Terminations shall be suitable for receiving bus trunking/underground cables. Cable terminations shall invariably be through terminal blocks ( Polymide of superior) or brought out solid terminals. (a) Supply "
-
-
-
3 nos of potential fuses and CT's as required. 1 set of blank gland plate
OUTGOING:
10 Nos 100A, TP&N, 415V,16/18KA 50Hz, MCCB with adjustable thermal magnetic O/L & S/C protection, Ics=100% Icu, along with suitable front operted handles,spreader links and phase barriers complete in all aspects simialr to DPX3 160 series of Legrand Make or Equivalent in Schneider /ABB/MG/Siemens subject to the approval of the department. Note: All the incoming units are to be provided with door interiors, phase barriers and protection guards ( on the incoming side) the non conducing metallic parts of the switch gear shall be double earthed. All interior tappings & connctions shall also be electrolytic copper.Incomer Terminations shall be suitable for receiving bus trunking/underground cables. Cable terminations shall invariably be through terminal blocks ( Polymide of superior) or brought out solid terminals.
(a) Supply "
1
-
-
"(b)Erection in all aspect including providing necessary angle iron chennels for the panel to be mounted on the existing trench, with required fastners,accessories and other allied works deemed to be required to complete as per site condition. (including necessary civil works as required and finishing the same to the original condition, along with cable excavation for loose/loop purpose as required.) "
1
-
-
12 W, VTPNDB with 100 A MCCB:- Supplying and fixing 12 way surface/ recess mounting, vertical type, 415 volts, TPN MCCB distribution board (with wire way/ cable end box) of sheet steel,dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, along with 100 amps TP 16/18 KA,MCCB with adjustable thermal magnetic O/L & S/C protection, Ics=100% Icu, with set of spreaders & Phase barriers as incomer, interconnection between incomer MCCB and bus bars as required . The VTPN DB shall be mounted on a adequate size angle/flat and grouted/ fixed (drilling,cutting welding painting etc) firmlyl or completely concealed in the existing wal as required as per site condition complete in all aspects. The above DB shall include the following'C' series, 10 kA MCB's in the out going circuits TP MCB-63A-03 Nos TP MCB-32A-03 Nos SP MCB-6-32A-15 Nos SP MCB-40-63A-03 Nos Blanking plates -As required.
2
-
-
6W,VTPNDB with 100 A MCCB:- Supplying and fixing 6 way surface/ recess mounting, vertical type, 415 volts, TPN MCCB distribution board (with wire way/ cable end box) of sheet steel,dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, along with 100 amps TP 16/18 KA,MCCB with adjustable thermal magnetic O/L & S/C protection, Ics=100% Icu, with set of spreaders & Phase barriers as incomer, interconnection between incomer MCCB and bus bars as required . The VTPN DB shall be mounted on a adequate size angle/flat and grouted/ fixed (drilling,cutting welding painting etc) firmlyl or completely concealed in the existing wal as required as per site condition complete in all aspects.
The above DB shall include the following'C' series, 10 kA MCB's in the out going circuits. TP MCB-32A-05 Nos SP MCB-6-32A-03 Nos Blanking plates -As required.
1
-
-
100A MCCB with Enclosure:- Supplying and fixing suitable size surface/ recess mounting, vertical type, 415 volts, TP& N MCCB enclosure with cable end box of 14 SWG sheet steel,dust proof, duly powder coated/ painted, common neutral link, earth bar, along with 100 amps TP 16/18 KA,MCCB with adjustable thermal magnetic O/L & S/C protection, Ics=100% Icu, with set of spreaders & Phase barriers as required . The MCCB enclosure shall be mounted on a adequate size angle/flat and grouted/ fixed (drilling,cutting welding painting etc) firmlyl or completely concealed in the existing wal as required as per site condition complete in all aspects.
5
-
-
Extending theTPN aluminium bar of the 400 A MCCB feeder at SS-1 suitabley to accomadate 3 Runs of 150 Sqmm UG aluminium cable with required accessories as per standards complete in all aspects as required as per site condition.
1
-
-
18 " Exhaust Fan : Supply of heavy duty 18" exhaust fan along with louver shutter,totally enclosed,continuously rated, dynamically balanced impeller suitable for single phase power supply, 900 rpm, having minimum 2290 CFM and noise level not exceeding 60 db having 2 years guarantee and shall be conforming to the Is standards.
6
-
-
12 "Exhaust Fan : Supply of heavy duty 12" exhaust fan along with metal bird screen for protection,continuously rated, suitable for single phase power supply, 1350/900 rpm, having minimum 1160 CFM and noise level not exceeding 60 db having 2 years guarantee and shall be conforming to the Is standards.
2
-
-
"FP MCB with Enclosure:- Supplying and fixing surface/ recess mounting type, 4P, MCB enclosure, sheet steel,dust proof, duly powder coated/ painted, along with 415 V, 32 amps, 4P C Series,MCB as required . The MCB enclosure shall be mounted firmly with required accessories or completely concealed in the existing wal as required as per site condition complete in all aspects as per the direction of the Engineer-in -charge.
"
8
-
-
"DP MCB with 4P Enclosure:- Supplying and fixing surface/ recess mounting type, 4P, MCB enclosure, sheet steel,dust proof, duly powder coated/ painted, along with 230 volts, 32 amps, DP C Series,MCB and blanking plates as required . The MCB enclosure shall be mounted firmly with required accessories or completely concealed in the existing wal as required as per site condition complete in all aspects as per the direction of the Engineer-in -charge.
"
13
-
-
Supply of LED Driver suitable for 2x2 ' Full glow LED fitting.
5
-
-
Supply of LED Driver suitable for 100W High bay LED fitting.
5
-
-
Supply of LED Driver suitable for 40W LED batten.
5
-
-
Supply of LED Driver suitable for Green Ultima Square LED fitting.
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements