Central Electrochemical Research Institute Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Central Electrochemical Research Institute - CECRI Tender
Metals and Non-Metals
Eprocure
Opening Date3 Jun 2022
Closing Date13 Jun 2022
Tender Amount₹ 76,93,842
Costs
EMD
₹ 1,53,877Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_CSIR_117862_1Bid Award Id
ViewTender No
CSIR CECRI NIT No 01/2022Tender Authority
Central Electrochemical Research Institute ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Renovation /Modification of existing spray dryer area in the magnesium pilot plant for chromium plating facility at CSIR-CECRI, Karaikudi
BOQ Items
Dismantling steel work in single sections including dismembering and stacking within 1000 metres lead in
27228
-
-
Shifting of old rectifier, transformer, boiler and other items from old sprey tryer area shed to store yard including all lifts and leads approx.1000metre as director by the engineer in-charge.
4400
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
7
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
13
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
6
-
-
Dismantling G.I. pipes including stacking of pipes within the nearest dumping ground as per direction of Engineer-in-charge : upto 50mm dia pipe
79
-
-
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :
-
-
-
Up to 10 mm thick
19.5
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area beyond 3 sq. metres
3
-
-
Cleaning the surface of bitumen road/concrete flooring of all dirt, scales, oil, grease and foreign material etc. The rate inclusive of all lift and leads and using mechanical brooms & air blowers as directed by the Engineer-in-charge.
264
-
-
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
114
-
-
Cleaning of MS angles from rust to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Upto 50x50mm MS 'L' angles
516
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
All kinds of soil.
136.5
-
-
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
5
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
16
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
18.5
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
200
-
-
Supplying chemical emulsion in sealed containers including delivery as specified.
-
-
-
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
40
-
-
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
62
-
-
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
65
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources)
57
-
-
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
71
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
139
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Mild steel and Medium Tensile steel bars
1334
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
4639
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
3.5
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
8.5
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:4 (1 cement :4 coarse sand)
86
-
-
12 mm cement plaster of mix :
-
-
-
1:6 (1 cement: 6 coarse sand)
437
-
-
Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.
-
-
-
In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)
-
-
-
Acid and alkali resistant tile
252
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
20 mm nominal dia Pipes
6
-
-
25 mm nominal dia Pipes
30
-
-
32 mm nominal dia Pipes
40
-
-
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
50 to 80 mm nominal bore
1
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
24085
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete
3774
-
-
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
Water thinnable cement primer
65
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
147
-
-
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
130
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
1896
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
15 mm nominal bore
10
-
-
25 mm nominal bore
2
-
-
Making thread with suitable size in Steel reinforcement bar as directed by the Engineer-in-charge. Mild steel and Medium Tensile steel bars(25mm dia)
72
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
503
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500 - 600mm)
23
-
-
Flashings/ Aprons.( Upto 600 mm)
50
-
-
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.
200
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
-
-
Providing and fixing CPVC ball valve of approved quality, High or low pressure, with plastic floats complete as directed by the Engineer -in -charge. 32 mm nominal bore
7
-
-
Extra for providing mechanical device chain and crank operation for operating rolling shutters.
-
-
-
Exceeding 16.80 sqm in area
36
-
-
Providing and fixing electrically operated rolling shutter & it shall be operated by a Fire proof electric motor of Suitable Capacity operating on 415V ± 10%, 50HZ, 3 phase or 220 V ± 10% ,50HZ, 1 Phase with CE Certified Side One/ Centre operated Drive Unit with Direct/Gear drive option, as required. This unit shall be in accordance to the Indian standard, as plug-on drive unit System, power supply wired with industrial plug, push button integrated in the housing lid Safety mechanism It should have provision for an integrated safety brake and double circuit limit switch which comply with the Indian standard. Control Switch shall have provision for three station push button with Dead man control feature which allows shutter to move as long as the operating button is being pressed. The motor shall have a push button control, with a minimum of 3 buttons marked “Up”, “Down” and “Stop”. Limit switches shall also be provided to cut off current to the motor when the shutter reaches the limit of its travel in the “Up” or “Down” directions. Rolling Shutter Size: 6m x 6m Preferred make - Siemens /ABB / BCH make. Interconnections from Starter, Motor, Limit switches etc., are in supplier scope.
1
-
-
Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge.
21
-
-
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using flats 30x6mm for diagonal braces and central cross piece
14.5
-
-
Providing and fixing fibre reinforced plastic sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 1.20 mm The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
188
-
-
Applying priming coat:
-
-
-
With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel work (second coat)
228
-
-
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (The required MS sections will be supplied by the Department).
4094
-
-
Providing Steel work in tubular section of round hollow tubes ( 110mm dia Heavy) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding or bolted with special shaped washers etc. complete. (The required MS pipe will be supplied by the Department). The over all running meter shall be taken for purpose of payment.
26
-
-
Providing Steel work in Tububular section of round hollow tubes ( 50mm dia Heavy) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding or bolted with special shaped washers etc. complete. (The required Materials will be supplied by the Department). The over all running meter shall be taken for purpose of payment.
46
-
-
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
-
-
-
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
310
-
-
Removing and re fixing of existing Steel glazed window after necessary alternation including necessary repair work of proper locking arrangements (Using MS Flats, etc.) and hinges as per site requirement as directed by the Engineer-in-charge. (Upto 4.00 sqm of shutters)
8
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
134
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
20
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
11
-
-
Supplying and fixing etching sticker for glass doors/ winows /glass partition including required design as directed by the Engineer-in-chage.
4
-
-
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.
-
-
-
GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
21
-
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
2
-
-
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 150mm
4
-
-
Providing and fixing 9 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with Non -decorative lamination on both sides
21
-
-
Providing and fixing precoated galvanised iron profile sheets 0.50 mmthick or below. The sheet shall be fixed using self drilling /self tapping screws with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Precoated galvanised iron profile sheets will be supllied by the department)
355
-
-
Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.
-
-
-
All kinds of soil
1510
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
30
-
-
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
25
-
-
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
25
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
150
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
300
-
-
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
25
-
-
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
150
-
-
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
50
-
-
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
25
-
-
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
25
-
-
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
3 x 1.5 sq. mm
80
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
50
-
-
25 mm
100
-
-
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
-
-
-
150 mm X 150 mm X 60 mm deep
5
-
-
180 mm X 100 mm X 60 mm deep
5
-
-
200 mm X 300 mm X 60 mm deep
5
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
10
-
-
15/16 A switch
50
-
-
3 pin 5/6 A socket outlet
15
-
-
6 pin 15/16 A socket outlet
50
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
25
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
5
-
-
8 Module (125mmX125mm)
5
-
-
12 Module (200mmX150mm)
10
-
-
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
15
-
-
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
40
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
6
-
-
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
6
-
-
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
10
-
-
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
5
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way , Double door
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
3
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
40
-
-
Double pole
1
-
-
Triple pole
5
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
30
-
-
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
5
-
-
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
5
-
-
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
2
-
-
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
1
-
-
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
For 4 way, Double door TPN MCBDB
3
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
80
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
5
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
225 mm width X 50 mm depth X 1.6 mm thickness
3
-
-
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
1
-
-
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
5
-
-
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
25
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
10
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
150
-
-
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
1
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Upto 35 sq. mm
225
-
-
Above 35 sq. mm and upto 95 sq. mm
150
-
-
Above 185 sq. mm and upto 400 sq. mm
225
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
-
-
-
Upto 35 sq. mm
25
-
-
Above 185 sq. mm and upto 400 sq. mm
25
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
5
-
-
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
5
-
-
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
5
-
-
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
25
-
-
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
25
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
15
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
3Y X 70 sq. mm (38mm)
10
-
-
3Y X 400 sq. mm (82mm)
2
-
-
4 X 10 sq. mm (25mm)
2
-
-
4 X 35 sq. mm (32mm)
2
-
-
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and paint etc. as required.
10
-
-
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
80
-
-
Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
10
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
150 mm dia
10
-
-
300 mm dia
10
-
-
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
200
-
-
90 mm dia (OD-90 mm & ID-76 mm nominal)
150
-
-
120 mm dia (OD-120 mm & ID-103 mm nominal)
200
-
-
Chromium Plating Plant: Supply, Erection Testing and commisioning of floor mounting cubicle type MV Panel fabricated out of 14 SWG CRCA sheet steel, complete with required Ms frame of adequate strength, powder coating/painintg etc., conforming to the enclosed specifications and comprising the following main bus bar of 400 A, TPN, Electrolytic copper bus, 3 phase, 50 x 5 mm per phase, 40X3 mm copper bus bar for neutral and 20x3mm of copper bus all over the panel for earth, [Please refer enclosed provisional drawing and the panel shall be conforming to IE rules,cpwd specifications and CEA guideance] etc., as required as per site condition.. INCOMMER: (a) 1 No of 400A, TPN, 415V, 50HZ, 36/50 KA MCCB with thermal adjustable thermal/ magnetic releases, spreaders and phase barriers along with suitable front operted handle. Similar to Type: DPS630 of Legrand or equivalent in Schneider/ MG / Siemens/ABB as approved by department. 1set of square flush type instrument meters confirming to IS:1248 for accuracy and shall be suitably protected with MCB/Fuses as per standards. MISC' voltmeter scaled (0-600V) range and Ammeter of suitable range.Make : AE/IMP/MECCO or equivalent. 2 set of VSS/ASS selector switch 3 nos of indication lamps of LED type with switch control. 3 nos of potential fuses and CT's as required. Set of blank gland plates as required. OUTGOING: 2 Nos 200A, TP&N, 415V, 50HZ, 25KA MCCB with adjustable thermal magnetic releses along with suitable front operted handle and necessary spreader links .DPX³ series of Legrand Make or Equivalent in SIEMENS /MG/ABB. 3 Nos 100A, TP&N, 415V, 50HZ, 16KA MCCB with adjustable thermal magnetic releses along with suitable front operted handle and necessary spreader links .DRX 100 series of Legrand Make or Equivalent in SIEMENS /MG/ABB. 3 Nos 63A, TP&N, 415V, 50HZ, 16KA MCCB with adjustable thermal magnetic releses along with suitable front operted handle and necessary spreader links .DRX 100 series of Legrand Make or Equivalent in SIEMENS /MG/ABB. Note: All the incoming units are to be provided with door interiors, phase barriers and protection guards ( on the incoming side) the non conducing metallic parts of the switch gear shall be double earthed. All interior tappings & connctions shall also be electrolytic copper.Incomer Terminations shall be suitable for receiving bus trunking/underground cables. Cable terminations shall invariably be through terminal blocks ( Polymide of superior) or brought out solid terminals. (a) Supply
1
-
-
(b) Erection in all aspect including providing necessary angle iron chennels for the panel complete in all aspects as required as per site condition Including necessary civil works, as required and finishing the same to the original condition, along with cable excavation for loose/loop purpose as required.)
1
-
-
12 Way MCCB VTPN DB: Supplying and fixing 12 way surface/ recess MCCB mounting, 415 volts, vertical type TPN MCB distribution board (with wire way/cable end box) of sheet steel,dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, along with 100 A,16/18 KA TPN MCCB, phase barrier and spreaders for incomer, interconnection between DB incomer and the bus bars/Existing mains shall be made with copper cables of appropriate rating as required. The VTPN DB shall be mounted on a adequate size angle/flat and grouted/ fixed (drilling,cutting welding painting etc) firmly in the existing wall/ existing base channel as required as per site condition complete in all aspects. The above DB shall include the following 'C' series, 10 kA MCB's in the out going circuits TP MCB-63A-4 Nos TP MCB-32A-4 Nos SP MCB-6-32A-12 Nos Blanking plates -As required. Make : ABB/Legrand /Schneider /Siemens/Hager or equivalent subject to the approval of the department.
2
-
-
Oven I/c Units : Supplying and fixing 40-63 amps rating, 415 volts, "C" curve, FP miniature circuit breaker suitable for inductive load in 6 module sheet steel enclosure with suitable blanking plate etc,complete with connections,testing and commissioning etc. as required
1
-
-
Supplying and fixing of 100A/125A TP&N, 415V, 50HZ, 16KA MCCB with adjustable thermal magnetic releses along with Enclosure suitable front operted handle and necessary spreader links .DRX 100 series of Legrand Make or Equivalent in SIEMENS /MG/ABB. complete with connections, testing and commissioning etc. as required.
2
-
-
2x2 LED Fitting: Supply and fixing recessed mounting full glow 2x2 LED energy efficient fitting, 4200 lumens, 38 watts, glare free light along with suitable driver in the existing false ceiling with required accessories for mounting the fittings firmly in the ceiling including interconnections along with 2 year warranty etc as required. Similar to Philips model no: 4200 lumens RC380B LED42S-6500 G5 L60W60 PSU OD or equivalent as approved by department.
4
-
-
Supply and fixing recessed mounting Down lighter LED energy efficient fitting,1000 lumens, glare-free light along with suitable driver in the existing false ceiling with required accessories for mounting the fittings firmly including interconnections along with 2 year warranty etc as required. Similar to Philips Green perform Model No: DN295B LED10S-6500 PSU WH or Equivalent as approved by department.
2
-
-
"60W LED St Light Fitting: Supply and fixing 60W/6800 Lumens LED Street Light fitting IP65with suitable drivers having vide voltage range and spike protection along with 3 year warranty etc., to be mounted in the existing street light pole as required .Similar to model no :BRB062 LED 68 of Philips make or equivalent as approved by departmen
10
-
-
Led Tube Light with Patty:
Supply of 4 Feet standard tube light patty with holder excluding choke of reputed brand /manufacture along with industrial type LED tube of 18/22watts, having not less than 2200 lumens, with standing wide voltage range and high power factor etc as required Make: Philips or equivalent as approved by the department
10
-
-
High Bay LED Fitting: Supply and fixing industrial type High Bay LED energy efficient fitting, 150 watts Green Perform Prime having efficacy 150 lumens/lux with wide beam angle and wide voltage range to be installed in the existing high roof truss mounted plant area with required accessories such as Clamps of adequate size and strength & SS metal chain as required to house the fitting satisfactorily to provide uniform lighting as per standards along with interconnection with adequate rated, 3C x TRS copper flexible cables etc as required in all aspects as per site condition. Similar to Philips Model No: BY515P LED 150S 5700 NB PSU GR LED or Equivalent as approved by department.
12
-
-
High Bay LED Fitting: Supply of industrial type High Bay LED energy efficient fitting, 150 watts Green Perform Prime having efficacy 150 lumens/lux with wide beam angle and wide voltage. Similar to Philips Model No: BY515P LED 150S 5700 NB PSU GR LED or Equivalent as approved by department.
5
-
-
Exhaust Fan : Supply of heavy duty 12" exhaust fan along with louver shutter,totally enclosed,continuously rated, dynamically balanced impeller suitable for single phase power supply, 900 rpm, having minimum 2290 CFM and noise level not exceeding 60 db having 2 years guarantee and shall be conforming to the Is standards.
2
-
-
18 " Exhaust Fan : Supply of heavy duty 18" exhaust fan along with louver shutter,totally enclosed,continuously rated, dynamically balanced impeller suitable for single phase power supply, 900 rpm, having minimum 2290 CFM and noise level not exceeding 60 db having 2 years guarantee and shall be conforming to the Is standards.
4
-
-
Removing the existing MV panel, unused electrical installations such as DB’s, SFU’s, Switch board of all types, lighting fixtures of all types, UG cables mounted in the plant area and other wiring items as required as per site condition and returning the removed materials to the stores section as directed by the engineer in charge. The charges towards shifting the department supply UG cables within the campus shall also be taken into account.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements