Bharat Heavy Electricals Limited Tender

CATEGORY: 920054030000-UN MACHINED DOOR COVER CASTINGS 100X250 MM AS PER DRG.3-28-231-00006 AND SPECIFICATION SA216 WCB , 920054400000-UN MACHINED BEARING LEVER AS PER DRG.3-45-836-00015 REV 01 AND SPECIFICATION ASTM A297 GR HH , 920055910100-UN MACHINED LEVER MAIN TILT VAR 01 AS PER DRAWING 3-45- 000-01433 REV 02 AND TDC 0435 REV 00 SPECIFICATION ASTM A27 Gr 65-35 WITH RADIOGRAPHY TEST , 920055920100-UN MACHINED LEVER MAIN TILT VAR 02 AS PER DRAWING 3-45-000-01433 REV 02 AND SPECIFICATION A27 GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055930100-UN MACHINED LEVER MAIN TILT DRIVE MECH AS PER DRAWING 3-45-000-01159 AND SPECIFICATION A27GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055940100-UN MACHINED LEVER INT BELL CRANK VAR01 AS PER DRAWING 3-45-000-01434 REV 01 AND SPECIFICATION A27GR65-35 AND TDC 435 REV 00 -WITH RADIOGRAPHY TEST , 920055970200-UN MACHINED RODENDCLEVIS SMALL VAR 01 AS PER DRAWING 4-45-000-01482 REV 01 AND SPECIFICATION A216GrWCA , 920055980200-UN MACHINED ROD END CLEVIS SMALL VAR 02 AS PER DRAWING 4-45-000-01482 REV 01 AND SPECIFICATION A216GRWCA , 920055990200-UN MACHINED ROD END CLEVIS LARGE VAR 01 AS PER DRAWING 3-45-000-01156 REV 02 AND SPECIFICATION A216GRWCA , 920056030200-UN MACHINED NOZZLE TIP SUPPORT BLOCK AS PER DRAWING 4-45-000-01481 REV 01 AND SPECIFICATION SA351-18CR8NI , 920056040200-UN MACHINED NOZZLE TIP SUPPORT BLOCK CAP AS PER DRAWING 4-45-000-01480 REV 01 AND SPECIFICATION A351-18CR8NI , 920056200000-UN MACHINED DIFFUSER CONE EXTN LEVER AS PER DRG.4-41-350-00877 REV 07 AND SPECIFICATION SA216 GR WCA , 920132240000-UN MACHINED NOZZLE TIP OPERATING LEVER CASTING AS PER DRAWING 3-45-325-00220 REV 03 AND SPECIFICATION A216WCB , 920132760000-UN MACHINED NOZZLE TIP BEARING CASTING AS PER DRAWING 4-45-000-00697 REV 03 AND SPECIFICATION A216WCB , 920400010000-UN MACHINED PIN CONNECTING LUG AS PER DRAWING 3-45- 000-01655 REV 00 AND SPECIFICATION SA351-18CR8NI , 920404830000-UN MACHINED PIN CONNECTING LUG AS PER DRAWING 3-45-000-01158 REV 00 AND SPECIFICATION SA351-18CR8NI , 920510040000-UN MACHINED DIFFUSER DISK CASTING AS PER DRAWING 3-41-125-00116 REV 04 AND SPECIFICATION A560-50CR50NICB , 920510340000-UN MACHINED PIN CONNECTING LUG DIA 17 MM HOLE AS PER DRG.4-45-325-00364 REV 03 AND SPECIFICATION ASTM A297 GRHH , 920510830000-UN MACHINED DIFFUSER DISC AS PER DRAWING 4-45-000-01470 REV 00 AND SPECIFICATION A560-GR50CR50NICB