Bhabha Atomic Research Centre Tender

Taking delivery from stores, Handling, Transportation, surface cleaning with acid as per the approved procedures and installation as per approved drawings of equipment/assemblies such as various process equipment such as SS 304L tanks, Scrubber, Pumps, Chiller, Heater etc. The payment will be made only after the final alignment and welding. Scope of this work also includes supply of SS shims, SS/CS Bolts & Nuts, Check nuts and washers, tightening of SS 304 L bolts/studs, washers, nuts and screws and seal welding of Nuts for equipment alignment. Preparation of drawings inluding as built drawings, handling of equipment using hoists/chain pulley blocks and skid-roller before final alignment, etc are also in the scope of this work.

Supply of SS304L plates, Surface treatment, Site Measurement, Preparation & submission of Drawings, Obtaining approval of the drawings, Fabrication C channels or rectangular/square box sections by rolling or bending as per the approved procedures/specification, fabrication of box sections by joining the C channels with full butt welding( if C channels are made), Inspections like visuals, DPT etc. and erection of the SS304L structural support members into the EPs by deploying GTAW and closing the CS EPs using SS304L material in thickness 3 mm supplied by user as FIM. This also covers shearing, cutting, fixing, welding, tacking, dimensional checking etc of all such supports to the existing carbon steel wall EPs or other structural members including RCC walls of underground vaults.The work includes mechanical & chemical cleaning, preparation of MIC, safe handling, storage, preparation of fabrication drawings, fabrication of structures as per approved drawings by GTAW using SS308L/SS309L filler wire, flush grinding of welds, weld inspection by LPT and Erection of structures, maintenance of cleanliness of these items, during all stages of storage, erection and till the system is completely handed over to the engineer.

Supply, site measurement, fabrication, inspection and installation of SS304L pipe supports in the form of angles and channels as per the approved drawings.The angles and channels of the SS304L shall be as per ASTM A276 or equivalent standards. The rates quoted shall include mechanical & chemical cleaning, preparation of MIC, safe handling, storage, preparation of fabrication drawings, fabrication of structures / pipe supports /equipment supports / platforms / ladders as per approved drawings by GTAW using SS308L/SS309L filler wire, flush grinding of welds, weld inspection by LPT and Erection of structures, maintenance of cleanliness of these items, during all stages of storage, erection and till the system is completely handed over to the engineer.