Airports Authority Of India Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Airports Authority Of India - AAI Tender
Coronavirus COVID 19
Eprocure
Opening Date30 May 2019
Closing DateCancelled
Tender Amount₹ 1,02,69,00,000
Costs
EMD
₹ 1,28,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_AAI_26627_1Bid Award Id
ViewTender No
AAI/ED ENGG-SR/CHENNAI/TB-INTERIORTender Authority
Airports Authority Of India ViewPurchaser Address
-Website
http://https://www.aai.aero/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Stainless steel cladding with Champagne strips-Providing & fixing of straight and curved independent Panelling for Columns anchored in floor cladded with 1.5 mm thick Stainless steel with champagne color strips sheet 316 grade finished in matte finish, pasted with industrial grade silicon on a robust substrate. Joint type - [overlap / open /Seamed].Substrate shall be with suitable MS box sections frame work of average 18 kg/ Sqm as per structural requirement & duly painted with antirust red oxide coating and covered with 8 mm thick two hour fire rated and waterproof ply, as per the approved drawing and design . The rate includes the cost of preparing appropriate substrate surface over the civil structure provided, along with material cost & installation / fixing on straight/ curved profiles which require thermoforming the material by making dyes and templates etc. All complete as per direction of Engineer In charge.
3382
-
-
Providing and fixing of straight and curved paneling of Veneer finished with Rosewood/ Walnut stained Mat PU finish on 12 mm thick Plywood of 2 hour fire retardant and waterproof . The item includes aluminum frame work of Aluminum extruded section size 40 X 20 X 2 mm @ 450 mm c/c horizontal and vertical thick as per specification and drawings. All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
1527
-
-
Supply and installation of Interior wall cladding of Approved make using 6mm thick Compact High Pressure Laminated sheet of approved colour and pattern fixed over aluminum of approved section size 30 X20 X2mm fixed at specified intervals with necessary accessories like GI anchor fastener including scaffolding etc. complete as per drawings. Item also includes providing and fixing of aluminum frames size 40 x 20 X 2mm thick @ 450 mm c/c Horizontal and vertical and provision of cutouts as per the drawing. All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
1805
-
-
Supply, & Installation of ZINC Titanium ( conforming to EN 988 stndards) Interlocking wall cladding panels in Pigmento Finish. The wall cladding system shall comprise of the following as described .ZINC 0.8 mm interlocking panels of 233 mm width and max 2000 mm length. Panels are formed with interlocking lap at panel edges and smooth, flat pan; designed to be field assembled in sequential installation by engaging edges of each panel to edge of adjacent panel. Panels are attached to supports/substrates using stainless screws located under edges of the panels The Panels Shall be Installed over the Aluminium box Section of 40 X 20 X 2mm thick @ 450 mm c/c horizontal and vertical with Screws/ Rivets of suitable size as recommended by manufacturer . Perforation : Custom CNC punching as per approved drawings . Circular perforation of varying diameters shall be done as per approved drawings to meet the cladding intent Physical characteristics of pre-weathered zinc sheets:(I) Density: 7.2kg/dm3,(II) Thermal expansion coefficient: 0.022 mm/m x ºC ,(III) Melting point: 420 ºC,(IV) Re-crystallization point: 300 ºC,(V) Heat conductivity: 110 W/ (m.K),(VI) Electrical conductivity: 17Ms/m.All complete as per direction of Engineer In charge. Test certificate as per certificate of manufacturer. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
6835
-
-
Providing and fixing panel of Zinc Composite Panel (ZCP) for wall cladding of approved shade made out of Zinc Titanium alloy sheet ( conforming to EN988 Standards) of 4mm thick Zinc Composite Panel (0.5mm +3mm + 0.5mm) material consisting of 3mm FR Grade Mineral Core sandwiched between on front Zinc Titanium alloy sheet and back Aluminium alloy sheet having a Service Coat. The weight of panel should be minimum 9.3 kg/sqm Make of 0.5 mm thick ZInc Titanium Sheets used for Manufacturing of ZInc Composite shall be same as the 1.5 mm thick Zinc Titanium sheets used for Column Cladding /wall cladding .The ZCP product must conform to EN 13501 class B s1 d0 and two hour fire retardant as per ASTM E119. The fastening brackets of MS with hot dip galvanised average 18 kg per sqm with serrations and serrated washers to arrest the wind load movement, fasteners, anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing. All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
7311
-
-
Providing & Fixing Melamine finished veneer wooden paneling of desired dimension .Two consecutive panels has 32 mm width gap and 3 mm deep . Structures for system shall be extruded aluminium profile of size 40 X 20 X 2mm @ 450 mm c/c horizontal and vertical as support for wooden veneer panel . Wall Panels shall be 2 hour fire resistance.All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
2920
-
-
Providing and fixing of 6mm thick Lacquered Glass of Approved make and colour with necessary Stainless Steel(316 grade) Matte finish fittings fixed over plywood panel using ISI water proof 18 mm thick plywood supported by Aluminium frame of Aluminium section of sizes 40 X 20 X 2mm thick @ 450 mm c/c horizontal and vertical including cost of necessary adhesive, furniture fittings etc. complete .All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
2375
-
-
Providing and fixing Imported designer wallpaper fixed with glue over a prepared surface of 1mm thick wall putty of approved make . All complete as per direction of Engineer In charge. Base Price of wall paper is 100 Rs per sqft. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
288
-
-
Khadi Silk Paneling -Providing and fixing Fabric khadi silk over wall with aluminium frame of size 40 X 20 X 2mm Thick @ 450 mm c/c horizontal and vertical and 12 mm thick Plywood of two hour fire retardant and waterproof . Fabric stretched on square edge proprietary system. Acoustic foam as per specifications to be fixed with no visible fixing. Rate shall be inclusive of 50 X 25 mm finished timber frame moulding as per approved drawing .All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
546
-
-
Toilet cladding Providing and laying digital printed glazed tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in dado ,with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints . Size 300 X600 mm. Base rate of digital printed glazed tiles may be considered as Rs 250 per sqft.All complete as per direction of Engineer In charge. (Provision of cutouts for fixtures shall be made as per the drawings and no deduction shall be made on account of measurement.)
774
-
-
Supply and installation of 6mm + 0.89mm film+6 mm Laminated Glass Partition cum handrail System with Fixtures of approved make. Further the Glass is supported with a 75 x 25 mm stainless steel 316 grade Post through a compound stem-key which connects the top rail with the post. Further a two point spider approved make will be used to support the Glass at 2200 mm level and at 3700 mm.further the glass would be inserted in top and bottom slotted u channel. The bolt used for fixing the glass would be of approved make. A top-rail of dia 38 mm will be fixed to the post though stem at 1100mm level. All SS should be SS316L grade with matte finish. All complete as per direction of Engineer In charge.
2714
-
-
Design, supply & installation of frameless glazed partitions as per IS 875 part 3 and AS1288 2006 CODAL requirements, partition wall incorporating 13.52mm thk toughened / laminated glass panels as per approved drawings, and 17.52mm thk toughened / laminated glass fins as stabilizers, used at each vertical joint to provide lateral stiffness against loading , deflections and other specified loads expected including frame work wherever necessary and hardware all other accessories in the glazing with all extrusions, fittings, fin brackets. Spider fittings of Approved make with 2 and 1 points spiders & stainless steel bolts as per design. The bolts for facade glass shall be of SS 316 with all necessary accessories. The spiders shall be manufactured by investment casting process of grade SS 316 as per EN norms. All screws, all elements such as flashing, coping, approved silicone sealants, etc. to make the system completely waterproof. All spider fittings should be designed to support the weight of the glass by direct bearing on the bolts wherein the structure should be designed as per the relevant codes and should be able to withstand the relevant thermal movements. Design calculations for the partitions to be furnished for approval by client / consultant. All complete as per direction of Engineer In charge.
4971
-
-
Wooden Partition- Providing and fixing free standing partition with double layer of 19mm ply of 2 hour Fire rated and water proof ply. Ply shall be cladded with Melamine finished Veneer of approved shade and make. Partition structure shall be made from aluminum hollow section of size 40 x 20 X 2mm tick @ 300 mm c/c on horizontal and vertical as required for stability. All complete as per direction of Engineer In charge.
15
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. All complete as per direction of Engineer In charge. Hot finished welded type tubes
15506.37
-
-
Providing & Fixing wood 200 concealed ceiling system MEDIUM SOUNDWOOD 3232 / LIGHT SOUNDWOOD 3232 covered in melamine finish panel dimensions 256 x 1792 mm with lines on the front of the panel every 32 mm and depth 3 mm, and perforations on the back every 32 mm. With application of black tissue applied on the back panel. Structures for system 200 SYSTEM Ceiling system must be incorporated with Art. PP1001.1 Extruded aluminium profile as support for MDF panel h. 3000 mm and Art. P3700Z Main runner in galvanized steel for MDF panel and Art. SP38.1 Cross connector. Ceiling Panel shall be two hour fire resistance. All complete as per direction of Engineer In charge.
31
-
-
Providing & placing, machine made Loop Pile Woven Carpets in either 320/320 or 320/240 Warp/Weft having pile fiber of 3-ply/S Twist Wool in Natural Blended and/or AZO Free Dyes; pile height of 5 to 6 mm and pile weight from 1200 to 1500 gms/smt (+/-5%); Backing in PP/Jute/Poly Cotton/VAE Latex. All complete as per direction of Engineer In charge.
77
-
-
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.
75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I
650
-
-
Supply and fixing of Art Form depicting Marina Beach on a painting background with 12K resolution LED TV playing the seashore and waves videos when we touch/cross the screen. Three paintings of Marina beach and figures on silhouts display. Sample of Art is detailed in tender document. Area 208 sqm
1
-
-
Supply and fixing of Art Form depicting Temples in Tamilnadu - Temple Murals in Various mediums- fixed on the Plywood panel box with Rosewood finished, Mat varnished and 1' height Planter box made out of plywood with natural finish garden pebbles and artificial plants. Sample of Art is detailed in tender document. Area 200 sqm
1
-
-
Supply and fixing of Art Form depicting Yoga in Avery media printed Customized background with Six Muthra Models and Paintings deputing different types of Yoga poses and 1' wide 1.5' height Planter box with Artificial Plants. Layer 1: Wall Graphics (Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L)printed as per the artwork and applied on the Wall surface. (Prices in Part A)
Layer 2: 6 Muthra Mudras to be painted deputing different types of Yoga poses. Sizes: 4' x 4'. (Prices in Part B). Layer 3: 1' x 1.5' Planter Box to be made with Artificial Plants and installed in front of the wall. (Prices in Part B).Sample of Art is detailed in tender document. Area 200 sqm
1
-
-
Supply and fixing of Art Form depicting Tribal Art in Avery media printed with background of Gond,Kurumba,Soura Paintings,Toda Embroidery work, Manipur Teapot, Metal Nandhi and Elephant Sculptures-Carved Wooden Statue with Treated Country wood Logs.
Layer 1: Wall Graphics Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L printed as per the artwork and applied on the Wall surface. Prices in Part A Layer 2: 3D Elements of Gond, Kurumba, Soura Paintings, Toda Embroidery work, Manipur Teapot, Metal Nandhi and Elephant Sculptures carved wooden statue with Treated count wooden logs. Prices in Part B. Sample of Art is detailed in tender document. Area 50 sqm
1
-
-
Supply and fixing of Art Form depicting Ancient Wisdom in Avery media Sheet printed background with Mural / Artificial Tree. Layer 1: Wall Graphics (Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L)printed as per the artwork and applied on the Wall surface.
Layer 2: Murals & Artificial Tree in the front. Price in Part Sample of Art is detailed in tender document. Area 54 sq. Sample of Art is detailed in tender document. Area 54 sqm
1
-
-
Supply and fixing of Art Form depecting Tamil - Thirukural,Tamil Poems, Cheran Cholan Pandiyan's Flag printed on Avery media with Mamallapuram Seashore Temple and Thiruvalluvar Statue Relief work.Layer 1: Wall Graphics Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L printed as per the artwork and applied on the Wall surface. Sample of Art is detailed in tender document. Area 432 sqm
1
-
-
Supply and fixing of Art Form depicting Migration - curved Natural background printed on Avery Dennison media and some group of bird murals are hanging in front of that background. Layer 1: Wall Graphics Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L printed as per the artwork and applied on the Wall surface. Layer 2 : Group of birds murals hung in the front of the printed graphics. Sample of art is detailed in tender document. Area 50 sqm.
1
-
-
Supply and fixing of Art Form depicting Chennai - the famous Classical Singers, places, festivals etc. in Chennai and Tamilnadu printed on Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L printed as per the artwork and applied on the Wall surface. Sample of Art is detailed in tender document. Area 144 sqm
1
-
-
Supply and fixing of Art Form depicting Patriotism - Indian Freedom Fighters printed Layer 1: Wall Graphics (Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L)printed as per the artwork and applied on the Wall surface. Prices in Part A with National Flag, Cap and Pigeon - Model works. Sample of Art is detailed in tender document. Area 50 sqm
1
-
-
Supply and fixing of Art Form depicting Traditional Temple Ceiling Paintings. Layer 1: Wall Graphics (Avery MPI 1000 Series + DOL 1000 Series Over lamination - 5 Year Warranty Media + O/L)printed as per the artwork and applied on the Ceiling Surface. Prices in Part A.Sample of Art is detailed in tender document. Area 50 sqm
1
-
-
Supply and fixing of Art Form depicting Festivals in Tamilnadu - Oyilattam, Jallikattu, Alzhgar Festival at Madurai, Pongal etc. printed in Avery MPI 1000 Series + DOL 1000 Series Laminate, 5 years warranty product) Sheet with Temple Relief work. printed as per the artwork and applied on the Ceiling Surface. Prices in Part A. Sample of Art is detailed in tender document. Area 50 sqm
1
-
-
Supply and fixing of Art Form depicting Vriksha by Artificial Tree with Lighting Concept - displaying Tamil Letters. Sample of Art is detailed in tender document.
Size: 20 X 20 ft
Subject : Aanganwadi Banyan Tree / Aala Vraksh
Material : Brass Technique : Handcrafted Sandcasting Brass
Brass used : 4.25 tonne
Sandcasting : Sandcasting moulds pattern : Welding, Polishing,tooling,grinding, buffing= Finishing (Antique + lacquer) Insurance, Transportation ,Fitting with finishing at site, installation .
4250
-
-
Tanjore painting - 1000X1000mm .Tanjore painting is a classical south Indian painting style. Tanjore painting are characterized by rich and vivid colors, simple iconic composition ,glittering gold foils overlaid on delicate but extensive gesso work and inlay of glass beads and pieces or very rarely precious gems. Sample of Art is detailed in tender document.
2
-
-
Modern Abstract Painting 600 X 1200mm.Abstract art uses a visual language of shape ,form, color and lines to create a composition which may exist with a degree of independence from visual reference in the world. Abstract art is non figurative ,non objective art and non representative art are loosely related terms. Sample of Art is detailed in tender document.
1
-
-
Modern Abstract Painting 4137 X 1500mm.Abstract art uses a visual language of shape ,form, color and lines to create a composition which may exist with a degree of independence from visual reference in the world. Abstract art is non figurative ,non objective art and non representative art are loosely related terms. Sample of Art is detailed in tender document.
1
-
-
Metal abstract mural 1500 X 716mm.A Mural is any piece of artwork , painted or applied directly on a wall , ceiling or other permanent surface . A distinguishing characteristic of mural painting is that the architectural element of the given space are harmoniously incorporated into the picture. Sample of Art is detailed in tender document.
1
-
-
Modern Abstract Painting 915 X 550mm.Abstract art uses a visual language of shape ,form, color and lines to create a composition which may exist with a degree of independence from visual reference in the world. Abstract art is non figurative ,non objective art and non representative art are loosely related terms Sample of Art is detailed in tender document.
4
-
-
Modern Abstract Painting 600 X 600mm .Abstract art uses a visual language of shape ,form, color and lines to create a composition which may exist with a degree of independence from visual reference in the world. Abstract art is non figurative ,non objective art and non representative art are loosely related terms .Sample of Art is detailed in tender document.
4
-
-
Providing and fixing Wash basin counters (vanity or in other location) with 12 mm thick antibacterial anti fungal, boiling water resistant heat resistant, impact resistant, insulative non conductive, stain resistant, scratch resistant, Green Guard certified Acrylic solid surface of Shade Sage Brush (PC) and design, confirming to relevant standards, and having minimum Specific Gravity 1.65 g/cm3, fixed over Stainless steel supporting structure of hollow tubes 3 mm thick about 10 kg per sqm with all mechanical fixtures as per manufacturer's specification and guideline, including fascia and back splash area as per approved drawings and design, including fixing of solid acrylic surface over 18 mm thick 100% water proof PVC Foam Board suitable of approved make or equivalent, with Low VOC adhesive, moulding of edges, buffing of surface, making of holes for plumbing fixtures, flushing of joints, necessary hardware, silicon sealants, etc. all complete as per direction of Engineer In charge. The vanity counter to be made out of acrylic solid surface of approved manufacturers and impact resistance of more than 120cm in ball drop test as per DIN ISO 4586 T12, The plan and elevation area (horizontal and vertical) including wash basin area will be measured for payment. All complete as per direction of Engineer In charge.
59
-
-
Providing and fixing AER DEC integrated sink ( model no AD 81000 of SLOAN or equivalent make) with sensor soap dispenser, Sensor faucet , Sensor hand dryer and sink basin all complete as per direction of Engineering in Charge.
6
-
-
Providing and placing in position check in counter of size 1000 x 892 x 1200mm as per approved drawing attached, internal frame work made with 19mm thick boiling water proof block board of approved make or equivalent, confirming to IS 1659 and complete exterior surface finished with 12mm thick solid acrylic polymer sheet of approved make or equivalent & colour combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer. All the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of approved make or equivalent & colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive with all necessary accessories like stainless steel screws / SS Hinges/ telescopic channels for drawers/handles/ locks bottom support/ necessary cutouts/ wire managers etc. all complete as per drawing and direction of Architect. The complete work includes construction of frame work with 19mm block board, fixing of solid acrylic sheets with necessary moulding of edges, fixing of laminate, drawers, shutters and all necessary hardware and placing in position of complete counter including all complete. (one mock-up sample to be made at the site according to the drawings and directions of EIC for further fabrication of balance counters).
140
-
-
Providing and placing in position immigration counter of size 2400 x 1800 x 1300mm as per approved drawing attached, frame work made with 19mm thick boiling water proof block board confirming to IS 1659 (of approved make or equivalent) and complete exterior surface finished with 12mm thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer. All the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive with all necessary accessories like stainless steel screws / SS Hinges/ telescopic channels for drawers/handles/ locks bottom support/ necessary cutouts/ wire managers etc. all complete as per drawing and direction of EIC.The complete work includes construction of frame work, fixing of solid acrylic sheets with necessary moulding of edges, fixing of laminate, drawers, shutters and all necessary hardware and placing in position of complete counter including all complete. (one mock-up sample to be made at the site according to the drawings and directions of EIC for further fabrication of balance counters)
56
-
-
Providing and placing in position Customs inspection table of size 2400 x 800 x 600mm as per approved drawing attached, frame work made with 19mm thick boiling water proof block board confirming to IS 1659 of (approved make or equivalent) and complete exterior surface finished with 12mm thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer. All the interior surface shall be finished with the wooden Primer and two coat of Enamel paint of approved shade and manufacturer. (sample to be approved before fixing) supported on suitable supporting members of wooden battens (2nd class teak) of size 50mm x 50mm with chamfering of edges/ moulding of granite slab of 18mm thickness along with bottom 175mm stainless steel cladding with 18 gauge 304 grade with all necessary frame work/ Stainless steel screws/ bottom support/ wire managers etc. all complete including Providing Openable shutter on one side made with 19mm thick BWP block board finished with 6mm thick solid acrylic surface as per drawing and direction of EIC. The complete work includes construction of frame work, fixing of solid acrylic with necessary moulding of edges of solid acrylic sheets, SS sheet and granite stone and all necessary hardware and placing in position of complete table including all complete. (one mock-up sample to be made at the site according to the drawings and directions of EIC for further fabrication of balance counters)
20
-
-
Providing and placing in position Customs counter of size 900x450x1050mm as per approved drawing attached, frame work made with 19mm thick boiling water proof block board confirming to IS 1659 of (approved make or equivalent) and complete exterior surface finished with 12mm thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer. All the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive with all necessary accessories like stainless steel screws / SS Hinges/ telescopic channels for drawers/handles/ locks bottom support/ necessary cutouts/ wire managers etc. all complete as per drawing and direction of EIC.The complete work includes construction of frame work with 19mm(BWP) block board, fixing of solid acrylic sheets with necessary moulding of edges, fixing of laminate, drawers, shutters and all necessary hardware and placing in position of complete counter including all complete. (one mock-up sample to be made at the site according to the drawings and directions of EIC for further fabrication of balance counters)
10
-
-
Providing and placing in position writing counters of size 1200x600x1050mm as per approved drawing attached consists of counter top platform of size 1200 x 600 mm and vertical rib of 300mm depth on all four sides, counter top at 1050mm and all outer vertical face shall be finished with 12mm solid acrylic polymer sheet of (approved make or equivalent) of approved colour combination including sanding, polishing, edge moulding, jointing, inlays/ Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the framework by using approved adhesive of original manufacturer, making necessary cutouts adhesives, nails, screws, accessories etc. on 19mm thick water proof marine plywood confirming to IS - 710 (approved make or equivalent), inside of 19mm plywood shall be finished withAll the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive with all necessary accessories like stainless steel screws / SS Hinges/ telescopic channels for drawers/handles/ locks bottom support/ necessary cutouts/ wire managers etc. all complete as per drawing and direction of Architect platform should be fixed to the frame made of 19mm thick marine plywood confirming to IS : 710 on both ends and middle as per approved drawing. The cost for the construction of counter includes material, labour and placing in position of the counter including all. (One mockup sample to be made at the site according to the drawings and directions of architect for further fabrication of balance counters).
18
-
-
Providing and fixing table for manual baggage checking table near security check of size 1250 x 750 x 800mm as per approved drawing attached, frame work made with 19mm thick boiling water proof block board confirming to IS 1659 (approved make or equivalent) and complete exterior surface finished with 12mm thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer. All the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive of manufacturer including providing SS hinges, SS handles, SS handles SS locks of approved make to the shutters / shelves. The Top of the table to be provided with 18-20 mm thick mirror polished granite of approved shade and colour as per approved drawing and directions of EIC. The cost for the construction table includes material, labour and placing in position of the table including all. (one mock-up sample to be made at the site according to the drawings and directions of EIC for further fabrication of balance counters)
3
-
-
Providing and placing in position stamping table and pedestal as per approved drawing of AAI, Frame work made with 19mm thick boiling waterproof block board confirming to IS : 1659 (approved make or equivalent) for stamping table complete exterior surface shall be finished with 12mm thick solid acrylic polymer sheet of (approved make or equivalent) approved color combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation (if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer and pedestal side vertical surfaces shall be finished with 12mm thick solid acrylic polymer sheets of (approved make or equivalent) approved colour combination including sanding, polishing, edge moulding, jointing inlays /sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the framework by using approved adhesive of original manufacturer. The top of the pedestal shall be finished with 18-20mm thick flamed granite of approved colour etc. all complete as per drawing and direction of EIC. The rate shall be inclusive of making complete frame work with all necessary screws, accessories, fixing of solid acrylic, moulding edges of granite, flaming of granite with all complete. ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the framework by using approved adhesive of original manufacturer, making necessary cutouts adhesives, nails, screws, accessories etc. on 19mm thick water proof marine plywood shall be finished withAll the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive with all necessary accessories like stainless steel screws / SS Hinges/ telescopic channels for drawers/handles/ locks bottom support/ necessary cutouts/ wire managers etc. all complete as per drawing and direction of Architect counter top platform should be fixed to the frame made of 19mm thick marine plywood confirming to IS : 710 on both ends and middle as per approved drawing. The cost for the construction of counter includes material, labour and placing in position of the counter including all. (One mokeup sample to be made at the site according to the drawings and directions of architect for further fabrication of balance counters).
24
-
-
Providing and fixing table for Security table near security check of size 1250 x 750 x 800mm as per approved drawing attached, frame work made with 19mm thick boiling water proof block board confirming to IS 1659 (approved make or equivalent) and complete exterior surface finished with 12mm thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding, polishing, edge moulding, jointing, inlays / Sublimation ( if required) and thermoforming of the solid polymer sheets to the required shape and fixing to the frame work by using approved adhesive of original manufacturer. All the interior surface shall be finished with 6MM thick solid acrylic polymer sheet of (approved make or equivalent) approved colour combination including sanding polishing edge moulding, jointing thermoforming of the solid surface sheet by using approved adhesive of manufacturer including providing SS hinges, SS handles, SS handles SS locks of approved make to the shutters / shelves. The Top of the table to be provided with 18-20 mm thick mirror polished granite of approved shade and colour as per approved drawing and directions of EIC. The cost for the construction table includes material, labour and placing in position of the table including all. (one mock-up sample to be made at the site according to the drawings and directions of EIC for further fabrication of balance counters)
12
-
-
Reception Counter - 2422 X 600 mm supply and placing of reception counter of size 2422 X 600 mm made from 19 mm plywood of 2 hour fire retardent and waterproof . Table shall be cladded by veneer with melamine polish finish. Rate includes all hardware and adhesive for drawers etc.
1
-
-
Reception Counter - 1096 X 600 mm-supply and placing of reception counter of size 1096 X 600 mm made from 19 mm plywood of 2 hour fire retardent and waterproof . Table shall be cladded by veneer with melamine polish finish. Rate includes all hardware and adhesive for drawers etc.
1
-
-
Reception Counter - 1250 X 600 X 1050 (h) mm-supply and placing of reception counter of size 1250 X 600 mm made from 19 mm plywood of 2 hour fire retardent and waterproof . Table shall be cladded by veneer with melamine polish finish. Rate includes all hardware and adhesive for drawers etc.
1
-
-
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscosity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.
3062
-
-
Extra for covering top of membrane with Geotextile, 120 gsm non woven, 100% polyester of thickness 1 to 1.25 mm bonded to the membrane with intermittent touch by heating the membrane by Butane Torch as per manufactures recommendation.
3062
-
-
Supplying and stacking of good earth at site including royalty and carriage upto Chennai Airport premises complete (earth measured in stacks will be reduced by 20% for payment).
1837
-
-
Supplying and stacking at site dump manure from approved source, including carriage upto Chennai Airport premises complete (manure measured in stacks will be reduced by 8% for payment): Screed through sieve of IS designation 20mm.
306
-
-
Mixing earth and sludge or manure in the required proportion specified asor directed by the Engineer-in-charge
2143
-
-
Spreading of sludge, dump manure and/or good earth in required thicknesses per direction of Engineer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
2143
-
-
Supply and Planting of Alpinia Variegated (three in one) plant having ht. 30 cm and above , with fresh and healthy variegated foliage in 25 cm size of Earthen Pot / Plastic Pot & as per direction of the Engineer-in-charge
100
-
-
Supply and planting Ground Covers and seasonal (seedlings of hybrid varieties), planting inside hedgerow. Rhoeo
800
-
-
Supply and stacking of Plumeria alba plant of height 120-135 cm. with 2-3 branches in bags of size 30 cm as per direction of the Engineer-in-charge.
140
-
-
Providing and Displaying Acalypha red well developed with fresh & healthy 30 to 45 cm ht. in 20 cm size Earthen Pot/ Plastic Pot as per direction of the Engineer-in-charge.
240
-
-
supply and planting of Duranta Golden plant, having ht.15 to 20 cm bushty shape plant with fresh and healthy leaves in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the Engineer-in-charge.
240
-
-
Supply and planting of Helianthus different colour with full bloom (3 in one) fresh & healthy in 25 cm Earthen Pot/Plastic Pot well developed as per direction of the Engineer-in-charge.
60
-
-
Supply and planting of Dieffenbachia meaclata plant, having ht. 45 cm to 60 cm with 5 and above leaves, well developed, fresh and healthy & attractive variegated foliage in 25 cm size of Earthen pot / Plastic pot & as per direction of the Engineer-in-charge.
100
-
-
Supply and Grassing with selection No. 1 grass including watering and maintenance of the lawn for 60 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (earth shall be paid for separately).
In rows 5 cm apart in both directions
2552
-
-
Supply and Installation of Living wall system and accessories including providing Green wall panels, Irrigation/Drain system, Cost of plants, Fabrication system using MS, painting with Enamel paint etc., complete as per Drawing and specifications and as directed by Engineer In-Charge.
95
-
-
Manufacture, supply and installation of Handmade granite Sculpture of approved theme of size 4'9" x 3'9" x 9'8" (L x B x H) in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, PCC, etc. to the satisfaction of the Engineer in Charge. Refer Sculpture 1 in Technical specification.
1
-
-
Manufacture, supply and installation of Handmade granite Sculpture of approved theme of size 4'9" x 3'9" x 9'8" (L x B x H) in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, PCC, etc. to the satisfaction of the Engineer in Charge. Refer Sculpture 2 in Technical specification.
1
-
-
Supply and installation of Handmade granite Sculpture of approved theme of size 3'x2'x5' in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, PCC, etc. to the satisfaction of the Engineer in Charge.
2
-
-
Supply and installation of Handmade granite Sculpture of approved theme of size 2'x2'x6' in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, PCC, etc. to the satisfaction of the Engineer in Charge.
4
-
-
Supply and installation of Handmade granite Sculpture of approved theme of size 3' dia and 4' height in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, PCC, etc. to the satisfaction of the Engineer in Charge.
2
-
-
Supply and installation of Tapering design Handmade granite Sculpture of approved theme of size 3'x3'x8' in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, PCC, etc. to the satisfaction of the Engineer in Charge.
4
-
-
Supply and installation of Handmade Staggering design granite Sculpture of approved theme of size 5'x2'x10' in the landscape area as specified in the drawing. All works to be completed including civil work such as earth work, Pcc, etc. to the satisfaction of the Engineer in Charge.
7
-
-
Providing Terracotta mural wall of various sizes made-up of terracotta indicating various themes complete as per drawings and specifications and as directed by the departmental officers.(Cost includes procurement and transportation of Terracotta murals to the garden, internal transportation, fixing, all civil works etc. Complete)
102
-
-
Supply and placing of Boulders of size not less than 1cft in volume and not less than 50 KG in weight in the landscape area as specified in the drawing. All works to be to completed to the satisfaction of the Engineer in Charge.(Cost includes procurement and transportation of boulders to the garden, internal transportation and arrangements etc.)
26
-
-
Supply and placing of two layers of Black Pebbles of size not less than 50mm dia in the landscape area as specified in the drawing. All works to be completed to the satisfaction of the Engineer in Charge.
236
-
-
Supply and placing of two layers of White Pebbles of size not less than 50mm dia in the landscape area as specified in the drawing. All works to be completed to the satisfaction of the Engineer in Charge.
138
-
-
Supply and fixing of 7mm thick HDPE Lattice panels of approved colour, Design and sufficient planting of White Allamanda Creepers including suitable framework, etc., complete as per Drawing and specifications and as directed by Engineer In-Charge.
200
-
-
Supplying and fixing of Granite Kerb stone of size 300x300x150 mm of approved colour with smooth finish including all civil works such as Earth work etc. complete as per drawings and specifications.
675
-
-
Main door - 1800 X 2400mm openable double glass door with patch fittings -Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be included in rates).
7
-
-
Pantry Glass door - 900 X 2340mm-openable glass door with patch fittings -Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper
etc.to be included in rates).
6
-
-
Wooden doors - providing and fixing 35mm thick wooden veneer laminated polished door of required size including all stainless steel fittings for toilet and passage area all complete as per direction of Engineer-in- charge.
15
-
-
Wooden carved door - 1800 X 2400mm providing and fixing 35mm thick wooden door as per drawing and details. Rate shall be included with all required stainless steel hardware and finishes.
4
-
-
Design, fabrication, supply, assembly, installation, testing & commissioning of PoE enabled smart suspended mounted strech fabric decorative luminaire along with necessary number of UL/CE certified PoE Drivers as per PoE network design. The shape and dimension of luminaire shall be as per tender intent drawing. The housing shall be made of aluminum 6062 White powder coated color RAL 9003 finish matt 50%. The luminaire shall have LM80 compliant high efficacy LEDs having CRI ≥ 80 & CCT 3000K & life of 50000 burning hours. The LED efficacy shall be minimum 160lm/w & shall have SDC5. The LEDs shall be from reputed makes such as Osram Germany / Nichia,Japan / Cree , USA / Lumiled USA / Sharp / Seoul / should be provided.The luminaire shall ensure average illumination level of 300 lux to 400 lux and average uniformity ≥0.4 below luminaire at working plane level of 0.70M. The luminaires shall be suspended using MS threaded roads or of suitable structure or suitable size to bear the load of luminaire. The luminaire shall use the rating of LEDs which are compatible with PoE driver including wiring of 2x 1.5 sqmm FRLS from PoE Driver to Luminare and all accessories as required for installation of fixuteres as per site requirement complete in all respect and as per technical specification. Make: Wipro/Philips/HEW/Hubble/Divinity/CREE/ Trilux/ Equivalent meeting the technical specifictions.
The luminaire shall use stretch fabric having following specifications complete in all respect:
Fire retardant grade: European standard b-s1-d0 ( EN13501-1)
Thickness: 0.15 to 0.20mm , Weight Approx.: 200gms/sq. mtr ,Breaking strength lengthwise: 185 kgs/cm2
Breaking strength widthwise: 220 kgs/cm2 ,Elongation lengthwise: 210% ,Elongation widthwise: 305%
Hardness: 93.5 Shore A. Light reflection properties High glossy: 80%
Light reflection properties for matt: 10%
Light transmittance properties back lighting: minimun 70%
Resistance to humidity: a) Impermeable to Water and steam, b) Anti-bacterial , Anti Fingal and Anti-Static, c) Flame retardant , non-flammable and self-extinguishing Thermal Properties: Dimensional Stability -5 deg C to +55 deg C
Recycling properties: 100% recyclable. The luminaire shall be placed at following tentative heights from FFL:
-
-
-
3M to 4M Height from FFL:
The luminaire shall occupy & illuminate below areas as per shapes & placement in tender intent drawings & ensure average Illumination level of 300lux to 400lux below luminaire at working plane level of 0.70M:
a) Arrival area: 5032sq.ft.
b) Departure Area: 2960 sq.ft.
c) VIP lounge at Domestic arrival: 200sq.ft.
d) VIP lounge at International Arrival: 220 sq.ft.
e) VIP lounge at International Departure: 200 sq.ft.
8612
-
-
8M to 9M Height from FFL: The luminaire shall occupy & illuminate below areas as per shapes & placement in tender intent drawings & ensure average Illumination level of 300lux to 400lu lux below luminaire at working plane level of 0.70M:
a) Mezzanine Area: 16388 sq.ft.
16388
-
-
Design, fabrication, supply, assembly, installation, testing & commissioning of IP 20 Pendant mounted Ring LED Luminaire including suspension system , housing made of Aluminium, seamlessly welded or joint using suitable mechanism giving clean & good finish. Diffuser made of satin PMMA/Polystyerene. The luminaire shall deliver minimum 8000lm & with minimum system efficacy of 65lm/w. The lumianire shall have only down-wards lighting contribution. The luminaire shall have LM80 compliant high efficacy LEDs having CRI ≥ 80 & CCT 3000K & life of 50000 burning hours. The LED efficacy shall be minimum 160lm/w & shall have SDC5. The LEDs shall be from reputed makes suchas Osram Germany / Nichia,Japan / Cree , USA / Lumiled USA / Sharp / Seoul / should be provided. Fixture should be hanged with Adjustable steel cable suspension. The luminaire shall have remote non integral BIS registered driver having THD≤ 10%, PF ≥0.95, surge protection ≥ 2KV & input volt age 150V to 270V. The LED Driver shall be easily avaiable in India for repair and service. Tentative Diameter of the ring shall be 2400mm to 2700mm & luminaire height between 90Mm to 150MM. The luminaire shall be complete in all respect including wiring with 1.5 sqmm FRLS from nearest tapping points and all accessories as required for installation of fixuteres as per site requirement complete in all respect and as per technical specification. The luminaire shall be with following certifications: LM79 from NABL accredited lab & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Make: Wipro/Philips/HEW/Hubble/Divinity/CREE/ Trilux/ Equivalent meeting the technical specifictions.
48
-
-
Supply, Installtion, Testing & commissioning of exterior LED ground burial equipped with with Die-cast aluminium housing along with tempred step glass. Fixture should have IP rating of IP67. The luminaire shall deliver minimum 783lm & with minimum system efficacy of 65lm/w. The lumianire shall have only upward-wards lighting contribution & shall have 30 Degree beam angle. The luminaire shall have LM80 compliant high efficacy LEDs having CRI ≥ 70 & CCT 3000K & life of 35000 burning hours. The LEDs shall be from reputed makes suchas Osram Germany / Nichia,Japan / Cree , USA / Lumiled USA / Sharp / Seoul. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V, 35,000 Hrs LED Life with L70 Criteria. The luminaire shall be with following certifications: LM79 from NABL accrediated lab & LM80 issued by LED manufacturer. The luminaire shall be complete in all respect &including wiring with 1.5 sqmm FRLS from nearest tapping points and all accessories as required for installation of fixuteres as per site requirement complete in all respect and as per technical specification . Make: Wipro/Philips/Trilux/HEW. Hubble/Divinity/Equivalent.
140
-
-
Supply, Installtion, Testing & commissioning of Non Integral circular LED flood light with circular base, made of die cast aluminium having IP66 Protection. The luminaire shall deliver minimum 1855lm & with minimum system efficacy of 65lm/w. The lumianire shall have beam angle of 30 Degrees. The luminaire shall have LM80 compliant high efficacy LEDs having CRI ≥ 70 & CCT 3000K & life of 35000 burning hours. The LEDs shall be from reputed makes such as Osram Germany / Nichia,Japan / Cree , USA / Lumiled USA / Sharp / Seoul / should be provided. The luminaire shall have remote non integral BIS registered driver having THD≤ 20%, PF ≥0.90, surge protection ≥ 2KV & input voltage 150V to 270V. The LED Driver shall be easily avaiable in India for repair and service. The luminaire shall be complete in all respect including wiring with 1.5 sqmm FRLS from nearest tapping points and all accessories as required for installation of fixuteres as per site requirementas and per technical specification The luminaire shall be with following certifications: LM79 from NABL accredited lab & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Make: Wipro/Philips/HEW/Hubble/Divinity/CREE/ Trilux/ Equivalent meeting the technical specifictions.
24
-
-
Supply, Installation, Testing & Commissioning of IP66 Non-Integral Linear surface mounted wall waher made of Die-cast aluminium housing for better heat dissipation & having minimum lenth of 1000mm. The luminaire shall deliver minimum 2000lm & having minimum system efficacy of 50lm/w. The lumianire shall have beam angle of 30 Degrees. The luminaire shall have LM80 compliant high efficacy LEDs having CRI ≥ 70 & CCT 3000K & life of 35000 burning hours. The LEDs shall be from reputed makes such as Osram Germany / Nichia,Japan / Cree , USA / Lumiled USA / Sharp / Seoul / should be provided. The luminaire shall have remote non integral BIS registered driver having THD≤ 20%, PF ≥0.90, surge protection ≥ 2KV & input voltage 150V to 270V. The LED Driver shall be easily avaiable in India for repair and service. The luminaire shall be complete in all respect & including wiring with 1.5 sqmm FRLS from nearest tapping points and all accessories as required for installation of fixuteres as per site requirement complete in all respect and as per technical specification. The luminaire shall be with following certifications: LM79 from NABL accredited lab & LM80 issued by LED manufacture along with Photo Biological Safety Standard. Make: Wipro/Philips/HEW/Hubble/Divinity/CREE/ Trilux/ Equivalent meeting the technical specifictions.
308
-
-
Supply, Installtion, Testing & commissioning of Z-Plug Field-Terminated Plug complete in all respect as per site requirement.
2595
-
-
Supply, Installtion, Testing & commissioning of Cat6 UTP Horizontal cable, LSOH, 305M reel (PoE) in existing cable tay/surface as required complete in all respect
815
-
-
Supply, Installtion, Testing & commissioning of Cat 6, double-ended, stranded modular cord, clear boot, CMG complete in all respect as per site requirement.
5504
-
-
Supply, Installtion, Testing & commissioning of Cat 6 Patch panel, 1U (At Rack side) complete in all respect as per site requirement.
119
-
-
Supply, Installtion, Testing & commissioning of Horizontal cable manager, 1U (for Patch panel) complete in all respect as per site requirement.
119
-
-
Supply, Installtion, Testing & commissioning of Horizontal cable manager, 1U (for Switch Chassis) complete in all respect as per site requirement.
332
-
-
Supply, Installtion, Testing & commissioning of Fiber cable, Indoor/Outdoor, OM3 in existing cable tay/surface as required complete in all respect
8500
-
-
Supply, Installtion, Testing & commissioning of Fiber patch panel with 3 slots black complete in all respect as per site requirement.
21
-
-
Supply, Installtion, Testing & commissioning of Fiber patch panel with high density fiber splicing complete in all respect as per site requirement.
21
-
-
Supply, Installtion, Testing & commissioning of Fiber, Adapter ,12 Fiber, LC type complete in all respect as per site requirement.
42
-
-
Supply, Installtion, Testing & commissioning of Fiber, Adapter ,24 Fiber, LC type complete in all respect as per site requirement.
42
-
-
Supply, Installtion, Testing & commissioning of Fiber Blank plate complete in all respect as per site requirement.
42
-
-
Supply, Installtion, Testing & commissioning of Fiber splice tray complete in all respect as per site requirement.
21
-
-
Supply, Installtion, Testing & commissioning of Fiber, Pigtail, OM3 LC Type complete in all respect as per site requirement.
504
-
-
Supply, Installtion, Testing & commissioning of HEAT SHRINK SLEEVE, 60MM complete in all respect as per site requirement.
504
-
-
Supply, Installtion, Testing & commissioning of Fiber patch cord, LC-LC, OM3, 3M complete in all respect as per site requirement.
84
-
-
Supply, Installtion, Testing & commissioning of Closed Cabinet, 42U, 800 x 1000, with vertical patching provision design complete in all respect as per site requirement.
21
-
-
Supply, Installtion, Testing & commissioning of Vertical Cable Tray, 42U complete in all respect as per site requirement.
42
-
-
Supply, Installtion, Testing & commissioning of Blank panel complete in all respect as per site requirement.
84
-
-
Supply, Installtion, Testing & commissioning of CABLE BRUSH GUARD complete in all respect as per site requirement.
21
-
-
Supply, Installtion, Testing & commissioning of 20U Vertical frame to mount the patch panel vertically complete in all respect as per site requirement.
119
-
-
Supply, Installtion, Testing & commissioning of Horizontal PDU,6 x 6/16A Sockets complete in all respect as per site requirement.
120
-
-
Supply, Installtion, Testing & commissioning of Lighting management software for 3000+ devices as per detailed specificatios of tender complete in all respect as per site requirement.
1
-
-
Supply, Installtion, Testing & commissioning of UPoE Switch as per detailed specificatios of tender complete in all respect as per site requirement.
314
-
-
Supply, Installtion, Testing & commissioning of Layer - 2/3 switch with 24 ports as per detailed specificatios of tender complete in all respect as per site requirement.
18
-
-
Server as per detailed specification & all necessary accessories as per site requirement complete in all respect as per site requirement.
1
-
-
computer as per detailed specification & all necessary accessories as per site requirement complete in all respect as per site requirement.
1
-
-
Supply and installing following size of galvanised iron perforated Hot dipped galvanized Iron cable tray (n galvanisation not less than 50 microns) type cable trays including with perforation not more than 17.5%, in convenient sections horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc as required.
650 mm width x 60mm depth x 2 mm thickness.
60
-
-
Supply and installing following size of galvanised iron perforated Hot dipped galvanized Iron cable tray (n galvanisation not less than 50 microns) type cable trays including with perforation not more than 17.5%, in convenient sections horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc as required.
300 mm width x 60mm depth x 1.6 mm thickness
1500
-
-
Supply and installing following size of galvanised iron perforated Hot dipped galvanized Iron cable tray (n galvanisation not less than 50 microns) type cable trays including with perforation not more than 17.5%, in convenient sections horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc as required.
150 mm width x 60mm depth x 1.6 mm thickness.
1000
-
-
Supply and installing following size of galvanised iron perforated Hot dipped galvanized Iron cable tray (n galvanisation not less than 50 microns) type cable trays including with perforation not more than 17.5%, in convenient sections horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc as required.
32 MM
500
-
-
Supply and installing following size of galvanised iron perforated Hot dipped galvanized Iron cable tray (n galvanisation not less than 50 microns) type cable trays including with perforation not more than 17.5%, in convenient sections horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc as required.
25 MM
500
-
-
Supply, Installation, Testing and commissioning of wall mounted online water Fountains, made of Stainless Steel 316 L with cooling capacity of 8.0 GPH (gallons per hour) of 50 degree F drinking water, based on 80 degree F inlet water and 90 degree ambient per ASHRAE 18 testing, furnished with double Bubbler.Unit shall be certified to UL 399 and CAN/CSA C22.2 No.120. Unit shall be lead-free design which is certified to NSF/ANSI 61 & 372 (lead free) and to be placed at different location of buidling. Agency has to execute all civil work for installing the Water Fountain for proper functioning and aesthetic view as directed by the engineer-in-charge without any extra cost with inbuilt RO plant having 8 GPH permeate capacity.
Finish:- Stainless Steel 304 Power:- 220-230v/60Hz Bubbler Style:- Double Bubbler
Activation by:- Mechanical Front Bubbler Button Mounting Type:- Wall Mount (In-Wall Frame/Plate)
Chilling Option:- 8.0 GPH Rated Watts:- 370 Installation Location:- Indoor No. of bottle filling station-1
-
-
-
No. of Stations Served:- 2 Based on 80° F inlet water & 90° F ambient air temp for 50° F chilled drinking water. COOLING SYSTEM
Compressor: Hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication. Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated. Cooling Unit: Combination tube-tank type. Continuous copper tubing with fully insulated with EPS foam that meets UL requirements for self-extinguishing material.
Refrigerant Control: Refrigerant R-134a Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset.
44
-
-
NOTE: The quantities of each item as specified in Schedule of Quantity (SOQ) shall be executed with prior approval of Engineer-in-Charge. The schedule of execution of various items including supply items shall be decided by the engineer-in-charge depending upon the site requirement.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements