NHPC Limited Tender

Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:3:6 mix. (1 cement, 3 coarse sand, 6 stone aggregate of 20mm & down size)

Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete- 1:5 Mix

Providing and Laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 coarse sand) as per the direction of Engineer in Charge including curing etc all complete

Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed (loreno, bronzo,colubia or equivalent) in skirting, risers of steps and Dados on 1 2mm thick cement plaster (1 cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry.

Providing and Laying white or colored glazed tiles anti skid (elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using. stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

Providing, fixing & removing form work for casting R.C.C items as indicated below: with imported timber from outside the state). Beam, lintels, girders, brersumers and cantilevers.

Providing / Fitting / Fixing in position suspended exposed grid false ceiling using E-Board pearl (tested for inflammability as per IS 11871)& E- Grid of grid size 1200 x 600 x/600 x 600 mm with main runners 39 x 24.7 mm cross Tee 29 x 24.7mm and wall angle 22.2 x 22.2 mm placing 4mm thick E-Board pearl in the grid of E- Grid duly suspended with 4mm dia GI bars hangers fixed with tee dash fastener of fro purlin of the roof with butterfly clips & hold down clips, providing provision for light fixtures air conditioning diffuser and ducts, sprinklers, smoke, detectors i/c paintings water based acrylic cement primer etc all complete.

Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Size 300x16mm. Aluminum Oxidized.

Providing and fixing Tower bolt 150x10mm with necessary screws etc complete. Aluminum.

Providing, fitting and fixing. handles 100mm size with necessary screws etc. complete. Aluminum.

Providing and fixing mortise lock with dead bolt and a pair of lever handles for W.C Bath room with necessary screws etc complete. Brass (C.P).

Providing and Fixing Hydraulic door closer with accessories and screws complete.

Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.

Providing, fitting, fixing of 24 BWG prepainted (HULLAS) sheet roofing with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with epoxy in each bolts (8 to 10 gm per bolt) including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage complete.

Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete.

Providing and fixing anodized aluminum works for doors,windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS 733 and IS 1285, fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC / neoprene felt, etc. Al. section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading for glazing / paneling CP brass /stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.

Providing and fixing prelaminated sheet three layer medium density (exterior grade) particle board grade - I type - II confirming IS 12823 bonded with phenol formaldehyde synthetic resin of approved brand and manufacture in panelling fixed in Aluminium doors, wndows, shutters and partition frames with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in Charge.

Providing and Providing and painting with plastic Emulsion paints one or more coats on old surface of required shade to give even shade in- including brushing the surface clean of all dirt, dust and smoothened by sand paper etc complete.

Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on walL. 20 mm nominal outer dia Pipes.

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK LONG BODY 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) ANGULAR STOP COCK 15 MM DIA

Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) CONNECTING PIPE

Providing, Fitting and fixing brass fittings of approved quality and size complete: GATE WAY VALVE 20MM DIA.

Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete.

Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.

Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. 600 x 20 mm

Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 100 mm dia. PRINCE/SUPREME or equivalent soil pipe.

Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 75 mm dia. Supreme / Prince.

Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 100 mm dia. Supreme / Prince.

Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 75 mm dia. Supreme / Prince.

Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan W.C. pan European Bidets constellation CAT NO 30006.

Providing, fitting and fixing. white vitreous white china wash flat back basin with CI brackets, painted, 15mm CP brass pillar taps, CP brass chain with rubber plug, 32mm CP brass waste pipe, lead or PVC connection 32mm dia CP brass cap and unions, complete including cutting and making good the walls wherever required. HINDWARE- One wash basin with one pillar cock.- 63 cm x 45 cm.

Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge-

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100 mm,Sand cast iron S&S as per IS - 1729

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 75 mm outlet. Sand Cast Iron S&S as per IS-1729.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Float glass panes. 4 mm thick glass pane (weight not less than 10kg/sqm).