Energy And Power Department Tender
View complete overview of Sikkim Energy And Power Department Tender
Energy And Power Department Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date27 Apr 2023
Closing Date17 May 2023
Tender Amount₹ 48,47,81,561
Costs
EMD
₹ 1,21,19,539Document Cost
₹ 2,00,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_EPDsi_641_1Bid Award Id
ViewTender No
662/GYL/NAM/SOR/PWRSYAUG/22-23Tender Authority
Energy And Power Department ViewPurchaser Address
-Website
http://sikkimtender.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
60 kV Lightning arrestor complete with insulating base and surge monitors & connector terminals connection.
3
368887
122962.48
Smoke detection system with all accessories and fittings
1
765017
765017.91
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm
190
89727
472.25
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm
190
40476
213.03
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm
190
45005
236.87
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm
190
76141
400.74
11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR. - 1 core X 300 sqmm
210
378858
1804.09
HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 11 KV CABLE- 1 core X 300 sqmm
6
42127
7021.19
11 KV 3 core XLPE cable for outgoing feeders 3 X 95 sqmm
140
460302
3287.88
11 KV 3 core XLPE cable for outgoing feeders 3 X 120 sqmm
147
400757
2726.24
Heat shrinkable outdoor type end termination kit for 11 kV XLPE cable 3 C x 120 sqmm
6
134989
22498.21
Heat shrinkable outdoor type end termination kit for 11 kV XLPE cable 3 C x 095 sqmm
6
125711
20951.84
Heat shrinkable indoor type end termination kit for 11 kV XLPE cable 3 C x 120 sqmm
3
46703
15567.89
Heat shrinkable indoor type end termination kit for 11 kV XLPE cable 3 C x 95 sqmm
3
39025
13008.5
40 mm MS rod for main earth mat
0.5
69778
139556.8
75x12 mm G.I Flats for risers for equipments, columns and structure
0.5
67607
135215.67
50x6 mm G.I flats for risers for all other equipments etc .
0.5
67607
135215.67
Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429)
69.14
5871
84.92
Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished
12
26815
2234.63
80 mm diameter x 3 Mtrs. Electrode (Copper Bonded) & two bags backfill chemical compound.
8
253495
31686.98
Transformer Oil 50KV grade Conforming to IS: 335/93
800
138248
172.81
G.I Strips 35x6 mm of 1 Mtr length conforming to IS 227.
30
4111
137.06
12 mtrs long Mast Light with 6 way LED flood light including automatic control panel, complete set.
2
1440314
720157.07
52 Kg Gas cylinder
1
80912
80912.79
Laying of hand packed stone in switchyard and other civil repair works
1
953440
953440
JORETHANG DIVISION - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION
-
-
-
11 KV, 800 Amp indoor VCB Panels - Incomer
2
2185338
1092669.06
11 KV, 800 Amp indoor VCB Panels - Bus Coupler
1
928769
928769.74
11 KV, 800 Amp indoor VCB Panels - Outgoing Feeders
4
4370676
1092669.06
11 KV XLPE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 x 95 sq mm
285
724755
2543
Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm
4
52033
13008.5
Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm
12
251422
20951.84
Dry type maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required.
1
572064
572064
Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation.
1
349595
349595.16
110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm
300
207373
691.24
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm
300
59441
198.14
Fire extinguisher 4.5 Kg DCP Type
5
46599
9319.88
Fire extinguisher 4.5 Kg CO2 Type
4
52498
13124.7
Fire extinguisher 22.5 Kg CO2 type
4
155780
38945.05
12 Fire buckets with stand
12
33859
2821.59
M.S angle 50mmx50mmx6mm
340.25
32091
94.32
75x12 mm G.I Flats for risers for equipments, columns and structure
0.85
114933
135215.67
Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished
12
26815
2234.63
Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room
6
190121
31686.98
G.I Strips 35x6 mm of 1 Mtr length conforming to IS 227.
100
13705
137.06
Civil and other associated repair works
1
1787700
1787700
JORETHANG DIVISION - REPLACEMENT OF 11 KV LINE ON 11 MTR. LONG LATTICED STRUCTURE WITH ACSR RABBIT CONDUCTOR
-
-
-
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable including all nuts & bolts complete without arms.
10
394530
39453.05
11 kV Disc Insulator 70 KN, B&S / TC Type
48
75440
1571.69
Hardware Fittings for disc insulator suitable for RABBIT conductor
48
15660
326.26
11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
12
5792
482.68
Rabbit Conductor 50 sqm
6.18
437868
70852.51
G.I. Wire 4 mm (8-SWG) for Continuous Earth
50
4692
93.85
PG Clamp for Rabbit Conductor
12
1483
123.65
Compression Joint for ACSR Rabbit conductor
12
1358
113.22
M.S.channel 75X40X6mmX2.2 m long for DP.
80
7545
94.32
Back clamps of 75x8mm M.S. flat for holding channel.
30
6212
207.08
M.S. nuts & bolts of 16mm dia.X 40mm length.
4
791
197.84
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
80
7545
94.32
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
10
943
94.32
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
6
30221
5036.85
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
6
17251
2875.22
Red oxide paint
20
3873
193.67
Aluminium paint
20
7359
367.97
G.I. Barbed Wire
20
1877
93.85
11 kV Caution Board
10
1266
126.63
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
10
38936
3893.61
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
10
10440
1044.02
JORETHANG DIVISION - REPLACEMENT OF 11 KV LINE ON 9 MTR. LONG LATTICED STRUCTURE WITH ACSR WEASEL CONDUCTOR
-
-
-
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
10
237317
23731.72
11 kV Disc Insulator 70 KN, B&S / TC Type
48
75440
1571.69
Hardware Fittings for disc insulator suitable for WEASEL conductor
48
15088
314.34
11 KV Pin Insulator (Porcelain) with G.I Pin & fittings as required ( ABI / Saravanan or equivalent )
12
5792
482.68
WEASEL Conductor 50 sqm
6.18
261874
42374.45
G.I. Wire 4 mm (8-SWG) for Continuous Earth
50
4692
93.85
PG Clamp for WEASEL Conductor
12
1483
123.65
Compression Joint for ACSR WEASEL conductor
12
1358
113.22
M.S.channel 75X40X6mmX2.2 m long for DP.
80
7545
94.32
Back clamps of 75x8mm M.S. flat for holding channel.
30
6212
207.08
M.S. nuts & bolts of 16mm dia.X 40mm length.
4
791
197.84
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
80
7545
94.32
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
10
943
94.32
Structure Earthing: 25x3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
6
30221
5036.85
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
6
17251
2875.22
Red oxide paint @ 2 ltr/ pole
20
3873
193.67
Aluminium paint @ 1.5 ltr / pole
20
7359
367.97
G.I. Barbed Wire
20
1877
93.85
11 kV Caution Board
10
1266
126.63
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
10
20522
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
10
10440
1044.02
JORETHANG DIVISION - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM,XLPE ARMOURED CABLE
-
-
-
3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II
3150
8010459
2543
110 mm dia. (95/70/50/35 sq.mm) Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex)
3000
2623449
874.48
G.I Pipe 6" Heavy Duty
30
92468
3082.29
G.I Pipe 4" Heavy Duty
30
62211
2073.73
Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm
6
205192
34198.7
Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm
6
125711
20951.84
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
3000
1598205
532.74
CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 50 SQMM COVERED CONDUCTOR
-
-
-
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
20
474634
23731.72
Covered conductor 50 Sq. mm.
12360
10974332
887.89
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
144
455648
3164.23
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
144
101255
703.16
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
248
784728
3164.23
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
248
959112
3867.39
Insulating Piercing Connector
52
191963
3691.6
11 KV Tension Mid Span Jointing Kit for Covered Conductor
8
82973
10371.64
11 KV Termination Kit for Covered Conductor
8
68909
8613.74
M.S.channel 75X40X6mmX2.2 m long for DP.
160
15090
94.32
Back clamps of 75x8mm M.S. flat for holding channel.
60
12424
207.08
M.S. nuts & bolts of 16mm dia.X 40mm length.
8
1585
198.14
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
264.8
24974
94.32
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
20.08
1893
94.32
Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
12
60442
5036.85
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
12
34502
2875.22
Red oxide paint @ 2 ltr/ pole
40
7746
193.67
Aluminium paint @ 1.5 ltr / pole
30
11039
367.97
G.I. Barbed Wire
40
3754
93.85
11 kV Caution Board
20
2532
126.63
G.I. Wire 4 mm (8-SWG) for Continuous Earth
100
9385
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
20
41045
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
12
12528
1044.02
JORETHANG DIVISION - 500 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. 500 KVA, 11/0.43KV Copper Wound
2
3255917
1627958.58
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 1000 A INCOMING: 1 No. 1000 A, 4P,50KA, MDO ACB. OUTGOING: 1 No. 400 A TP MCCB, 50 KA, 3 No. 200A TP MCCB, 50 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
2
1371165
685582.95
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
2
56130
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
2
35926
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
20
31701
1585.09
Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 35 sqmm EPKT 3362
4
73677
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
4
94926
23731.72
M.S.channel ISLC75 (75X40X6mm)
126
11883
94.32
M.S.channel ISLC75 (75X40X6mm)
176
16599
94.32
Back clamps of 75X8mm Flat
16
3313
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
8
1585
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
6
21738
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
6
150560
25093.35
Red Oxide Metal Primer conforming to IS: 2074
12
2324
193.67
Aluminium paint
8
3337
417.13
Danger Board 11000Volts
2
253
126.63
Danger Board 440Volts
2
187
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
4
8209
2052.28
Placement of 500 KVA distribution Transformer on parapet of size 1.5x1.5x1mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
2
20417
10208.96
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
2
4354
2177.42
Fencing for 400/500/630/750 KVA parapet mounted distribution sub-station of size 3.5x4 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No. 3/F/E&PD/400-750 KVA.
2
126223
63111.77
JORETHANG DIVISION - 100 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. - 100 KVA, 11/ 0.433 KV, Copper Wound
1
574434
574434.19
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 200 A INCOMING: 1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
1
163485
163485.17
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
1
28065
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
1
17963
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
10
15850
1585.09
Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm
2
36838
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
2
47463
23731.72
M.S.channel ISLC75 (75X40X6mm)
63
5941
94.32
M.S.channel ISLC75 (75X40X6mm)
88
8299
94.32
Back clamps of 75X8mm Flat
8
1656
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
4
792
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
3
10869
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
3
75280
25093.35
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
6
1162
193.67
Aluminium paint @ 1.0 ltr / pole
4
1668
417.13
Danger Board 11000Volts
1
126
126.63
Danger Board 440Volts
1
93
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
2
4104
2052.28
Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
6901
6901.71
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
1
2177
2177.42
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
1
50426
50426.25
JORETHANG DIVISION - 63 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, ONAN COOLED, OUTDOOR/INDOOR TYPE DISTRIBUTION TRANSFORMER PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS: 1180(PART-I)2014:ENERGY EFFICIENCY LEVEL 2 - 63 KVA, 11/ 0.433 KV, Dyn 11, Aluminum Wound (3 phase)
1
274672
274672.66
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 100 A INCOMING: 1 No. 100 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 63A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
1
128327
128327.07
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
1
28065
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
1
17963
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
10
15850
1585.09
Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm
2
36838
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
2
47463
23731.72
M.S.channel ISLC75 (75X40X6mm)
63
5941
94.32
M.S.channel ISLC75 (75X40X6mm)
88
8299
94.32
Back clamps of 75X8mm Flat
8
1656
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
4
792
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
3
10869
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
3
75280
25093.35
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
1
2875
2875.22
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
6
1162
193.67
Aluminium paint @ 1.0 ltr / pole
4
1668
417.13
Danger Board 11000Volts
1
126
126.63
Danger Board 440Volts
1
93
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
2
4104
2052.28
Placement of Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
6901
6901.71
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
1
2177
2177.42
Fencing for 10/16/25/63 KVA pole mounted distribution sub-station of size 2x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per layout No. 1/F/E&PD/10-63 KVA.
1
41342
41342.35
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
1
1044
1044.02
JORETHANG DIVISION - INSTALLATION OF NEW 250 KVA 11/0.43 kV PACKAGED SUB-STATION
-
-
-
PACKAGED SUB-STATIONS 11/0.433 KV CONSISTING OF 3 WAY SF6 / VCB INSULATED COMPACT RMU, OIL COOLED (ALUMINUM WOUND)/ DRY TYPE COPPER WOUND TRANSFORMER AND L.T SECTION WITH ONE ACB AS INCOMING AND 3 NOS OUTGOING MCCB FEEDERS AND WITH ENCLOSER MADE OF ELECTROMECHANICALLY GALVANIZED:- 250 KVA Oil cooled transformer (Al)
1
2622658
2622658.69
Placement of 100 KVA to 500 KVA Compact Packaged Substation on parapet of size 3.3mtrx2.75x0.5mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
27207
27207.6
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
1
50426
50426.25
JORETHANG DIVISION - NEW 3 PHASE 5 WIRE OVERHEAD LT LINE ON AAC GNAT CONDUCTOR
-
-
-
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
20
352921
17646.09
LT shackle insulator 3"x3 1/2".
100
8789
87.9
D' clamp complete with pin, washers, nuts & bolts.
100
7597
75.98
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm anchor plate.
10
15597
1559.77
AAC GNAT conductor 50 sq.mm.
4.08
103997
25489.62
No. 12 SWG G.I wire for continuous earth wire
110
10323
93.85
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
2
32238
16119.1
Danger Board 440 Volts.
20
1877
93.85
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
30
5810
193.67
Painting of poles with Aluminium paint @1 Ltr./pole.
20
7359
367.97
G.I Barbed wire @ 2Kg/pole.
40
3754
93.85
Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix.
20
41045
2052.28
Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit.
10
9153
915.3
JORETHANG DIVISION - NEW 1 PHASE 2 WIRE OVERHEAD LT LINE ON AAC GNAT CONDUCTOR
-
-
-
8.5 mtr. steel latticed structure of 35x35x6 mm complete with nuts & bolts.
40
705843
17646.09
LT shackle insulator 3"x3 1/2".
100
8789
87.9
D' clamp complete with pin, washers, nuts & bolts.
100
7597
75.98
Guy assembly complete with 7/12 SWG GI stay wire, 110x75 mm LT guy insulator, 16mm dia stay rod,1.8 mtrs. long with bow thimble, turn buckle and 150x150x6mm anchor plate.
20
31195
1559.77
AAC GNAT conductor 30 sq.mm.
4.08
103997
25489.62
Safe Earthing model T-19 short current 20KA rms for 1 sec(LV / MV) application. 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
4
64476
16119.1
Danger Board 440 Volts.
40
3754
93.85
Painting of poles with Red Oxide paint @1.5 Ltr./pole.
60
11620
193.67
Painting of poles with Aluminium paint @1 Ltr./pole.
40
14718
367.97
G.I Barbed wire @ 2Kg/pole.
80
7508
93.85
Concreting of 8.5 mtr. Structure in 1:4:8 cc in 0.9x0.9x1.50 mtrs. pit, contruction of parapet 0.35x0.475xx0.153 mtrs. in 1:3:6cc i/c 12mm cement plaster of parapet in 1:4 mix.
40
82091
2052.28
Concreting of LT guy assembly in 1:4:8cc in 0.30x0.30x1.05 mts. pit.
20
18306
915.3
JORETHANG DIVISION - 3.5 x 185 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm
2100
5208911
2480.43
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
2000
1748966
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm
4
52778
13194.72
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
2
540293
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
10
1500803
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
12
301835
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
56
66740
1191.8
Aluminum thimble ring 185sqmm
16
953
59.59
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2000
1065470
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
12
26129
2177.42
JORETHANG DIVISION - 3.5 x 120 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 120 sqmm
5250
8869229
1689.38
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
5000
4372415
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 120 sqmm
10
96029
9602.93
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
5
1350733
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
25
3752009
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
30
754588
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
140
166852
1191.8
Aluminum thimble ring 120 sqmm
40
1489
37.24
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
5000
2663675
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
30
65322
2177.42
JORETHANG DIVISION - 4 x 16 sq.mm New LT Underground Feeder
-
-
-
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
4000
1614888
403.72
Aluminum thimble ring 16sqmm
832
7437
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
2000
369458
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
400
85809
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
4
89385
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
2400
1278564
532.74
JORETHANG DIVISION - MIXED TYPE LT CABLE FOR SERVICE CONNECTION
-
-
-
2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
2400
632846
263.69
2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
2400
715080
297.95
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
1200
484466
403.72
Aluminum thimble ring 10 & 16sqmm
1248
11155
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
3000
554187
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
600
128714
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
6
134077
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
3600
1917846
532.74
JORETHANG DIVISION - 3x50+1x35+1x16 sq.mm, LT Aerial Bunched Cables
-
-
-
8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21
36
1034917
28747.71
8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs.
24
423506
17646.09
3 x 50 sq.mm + 1 x 16 sq.mm + 1 x 35 sq.mm, 1.1 KV with aluminum alloy bare messenger wire
3150
1661221
527.37
LT A.B Cable tension clamps (Galvanized)
60
37094
618.25
LT A B cable Suspension clamps (Galvanized)
60
29675
494.6
Clamps for neutral for AB Cable
60
2949
49.16
LT Dead End Clamp for L.T.A.B Cable
60
34770
579.51
Service Rings half round
60
10547
175.79
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
240
24312
101.3
Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm)
210
30971
147.49
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
45
70189
1559.77
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
24
602240
25093.35
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
60
13675
227.93
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
30
78748
2624.94
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
30
50815
1693.85
Anti-Climbing Device (Barbed Wire)
120
11262
93.85
11 KV Caution Board
60
8402
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
108.15
20945
193.67
Aluminium paint @ 1.0 ltr / pole
60
25027
417.13
Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
60
123136
2052.28
Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
45
46980
1044.02
JORETHANG DIVISION - LED STREET-LIGHTING SYSTEM
-
-
-
LED Street light 45 Watt
120
1598025
13316.88
1.0 sqmm. ISI marked FRLSH PVC insulated Single core industrial multistrand copper conductor voltage grade upto 1100 V.
5104
76039
14.9
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED 4 Core x 16 sqmm
4200
1695632
403.72
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
4000
738916
184.73
Polycarbonate junction box with bus bar arrangement & 6 Amp MCB
120
158568
1321.41
Red oxide paint.
180
34860
193.67
Al.paint.
120
50055
417.13
SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 2 Mtrs. Electrode & one bag backfill chemical compound.
8
128952
16119.1
G.I Earth Spike conforming to IS 227.
120
179485
1495.71
G.I.street light bracket
120
142479
1187.33
8.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs
120
2608254
21735.45
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
4000
2130940
532.74
Concreting of above 8.5 mtr pole in 1:4:8 mix ccm in 54'x2'x2'depth earth pit and plastered parapet
120
286032
2383.6
NAMCHI DIVISION - 66/11 KV SUB-STATION - ADDITIONAL EQUIPMENTS
-
-
-
72.5 KV, 3 core current transformer having ratio 400-300-200/1 + 1+1 and of accuracy class and burden of 30 VA with first tilling of oil and complete with terminal connectors.
6
1590516
265086.12
72.5 kV 800 amps rated current 12.5 kA short time rating, triple pole, gang operated outdoor type with motor operated mechanism, terminal connectors, earthing connector with earthing blades.
1
266844
266844.02
Smoke detection system with all accessories and fittings
1
765017
765017.91
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm
100
47225
472.25
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm
100
21303
213.03
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm
100
23687
236.87
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm
100
40074
400.74
11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR. - 1 core X 300 sqmm
200
360817
1804.09
HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 11 KV CABLE- 1 core X 300 sqmm
6
42127
7021.19
11 KV 3 core XLPE cable for outgoing feeders 3 X 95 sqmm
100
328787
3287.88
11 KV 3 core XLPE cable for outgoing feeders 3 X 120 sqmm
119
324422
2726.24
Heat shrinkable outdoor type end termination kit for 11 kV XLPE cable 3 C x 120 sqmm
6
134989
22498.21
Heat shrinkable outdoor type end termination kit for 11 kV XLPE cable 3 C x 095 sqmm
6
125711
20951.84
Heat shrinkable indoor type end termination kit for 11 kV XLPE cable 3 C x 120 sqmm
3
46703
15567.89
Heat shrinkable indoor type end termination kit for 11 kV XLPE cable 3 C x 95 sqmm
3
39025
13008.5
40 mm MS rod for main earth mat
0.5
69778
139556.8
75x12 mm G.I Flats for risers for equipments, columns and structure
0.5
67607
135215.67
50x6 mm G.I flats for risers for all other equipments etc .
0.5
67607
135215.67
Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429)
63.87
5423
84.92
Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished
12
26815
2234.63
80 mm diameter x 3 Mtrs. Electrode (Copper Bonded) & two bags backfill chemical compound.
8
253495
31686.98
Transformer Oil 50KV grade Conforming to IS: 335/93
800
138248
172.81
G.I Strips 35x6 mm of 1 Mtr length conforming to IS 227.
30
4111
137.06
52 Kg Gas cylinder
1
80912
80912.79
Laying of hand packed stone in switchyard and other civil repair works
1
357540
357540
NAMCHI DIVISION - NEW 11/ 11 KV SWITCHING STATION
-
-
-
11 KV, 800 Amp indoor VCB Panels - Incomer
2
2185338
1092669.06
11 KV, 800 Amp indoor VCB Panels - Bus Coupler
1
928769
928769.74
11 KV, 800 Amp indoor VCB Panels - Outgoing Feeders
4
4370676
1092669.06
200 KVA, 11/0.433 KV , 3-phase (outdoor type) with first filling of oil with off load tapping + 2.5 %, + 5% with copper winding.
1
922724
922724.34
Fencing for 200KVA parapet mounted distribution substation of size 3x3 mtrs. constructed with 50x50x5mm MS angle vertical props, 35x35x6mm MS angle supports (double run), G.I. wire mesh, 50x6mm MS Flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc.
1
63032
63032.81
L.T. distribution Switch Board, outdoor type kiosk , 400 Amp, having electrolytic annealed copper bus bar 50x12 mm for phase & 50x6 mm for neutral circuits mounted on glazed porcelain or bakelite base and fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps, cabin light, fabricated with 12 gauge M.S. plain sheet, painted with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front & back opening doors with Gasket and locking arrangement complete. Incoming : 1 No. 400A, 415 V, FP MCCB breaking capacity 50 KA with built in Thermo Magnetic Release. Outgoing : 1 No. 200A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 3 Nos. 100A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 1 No. 63A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release.
1
272475
272475.28
11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 X 95 sq mm
318
808674
2543
Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 X 95 sq mm
5
65042
13008.5
Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 X 95 sq mm
15
314277
20951.84
Dry type maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required.
1
572064
572064
Battery charging sets, one for trickle charging and other for boost charging suitable for operateion as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation.
1
349595
349595.16
110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 11KV CR panel in control room.
1
303982
303982
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm
350
241934
691.24
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm
400
79256
198.14
Fire extinguisher 4.5 Kg DCP Type
6
55919
9319.88
Fire extinguisher 4.5 Kg CO2 Type
6
78748
13124.7
Fire extinguisher 22.5 Kg CO2 type
3
116835
38945.05
12 Fire buckets with stand
12
33859
2821.59
M.S angle 50mmx50mmx6mm
840.07
79235
94.32
75x12 mm G.I Flats for risers for equipments, columns and structure
0.9
121694
135215.67
Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished
15
33519
2234.63
Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room
15
475304
31686.98
G.I Strips 35x6 mm of 1 Mtr length conforming to IS 227.
150
20559
137.06
Associated civil works
1
6554900
6554900
NAMCHI DIVISION - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION
-
-
-
11 KV, 800 Amp indoor VCB Panels - Incomer
2
2185338
1092669.06
11 KV, 800 Amp indoor VCB Panels - Bus Coupler
1
928769
928769.74
11 KV, 800 Amp indoor VCB Panels - Outgoing Feeders
4
4370676
1092669.06
11 KV XLPE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 x 95 sq mm
285
724755
2543
Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm
4
52033
13008.5
Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm
12
251422
20951.84
Dry type maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required.
1
572064
572064
Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation.
1
349595
349595.16
110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm
300
207373
691.24
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm
300
59441
198.14
Fire extinguisher 4.5 Kg DCP Type
5
46599
9319.88
Fire extinguisher 4.5 Kg CO2 Type
4
52498
13124.7
Fire extinguisher 22.5 Kg CO2 type
4
155780
38945.05
12 Fire buckets with stand
12
33859
2821.59
M.S angle 50mmx50mmx6mm
340.25
32091
94.32
75x12 mm G.I Flats for risers for equipments, columns and structure
0.85
114933
135215.67
Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished
12
26815
2234.63
Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room
6
190121
31686.98
G.I Strips 35x6 mm of 1 Mtr length conforming to IS 227.
100
13705
137.06
Civil and other associated repair works
1
1787700
1787700
NAMCHI DIVISION - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM,XLPE ARMOURED CABLE
-
-
-
3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II
4200
10680612
2543
110 mm dia. (95/70/50/35 sq.mm) Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex)
4000
3497932
874.48
G.I Pipe 6" Heavy Duty
40
123291
3082.29
G.I Pipe 4" Heavy Duty
40
82949
2073.73
Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm
8
273589
34198.7
Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm
8
167614
20951.84
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
4000
2130940
532.74
NAMCHI DIVISION - CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 50 SQMM COVERED CONDUCTOR
-
-
-
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
10
237317
23731.72
Covered conductor 50 Sq. mm.
6180
5487166
887.89
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
72
227824
3164.23
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
72
50627
703.16
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
124
392364
3164.23
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
124
479556
3867.39
Insulating Piercing Connector
26
95981
3691.6
11 KV Tension Mid Span Jointing Kit for Covered Conductor
4
41486
10371.64
11 KV Termination Kit for Covered Conductor
4
34454
8613.74
M.S.channel 75X40X6mmX2.2 m long for DP.
80
7545
94.32
Back clamps of 75x8mm M.S. flat for holding channel.
30
6212
207.08
M.S. nuts & bolts of 16mm dia.X 40mm length.
4
792
198.14
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
132.4
12487
94.32
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
10.04
946
94.32
Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
6
30221
5036.85
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
6
17251
2875.22
Red oxide paint @ 2 ltr/ pole
20
3873
193.67
Aluminium paint @ 1.5 ltr / pole
15
5519
367.97
G.I. Barbed Wire
20
1877
93.85
11 kV Caution Board
10
1266
126.63
G.I. Wire 4 mm (8-SWG) for Continuous Earth
50
4692
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
10
20522
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
6
6264
1044.02
NAMCHI DIVISION - 250 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. 250 KVA, 11/ 0.433 KV, Copper Wound
4
4141618
1035404.56
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 630 A INCOMING: 1 No. 630 A, 4P,50KA, MDO ACB. OUTGOING: 3 Nos. 200A TP MCCB, 50 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
4
2566541
641635.33
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
4
112261
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
4
71853
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
40
63403
1585.09
Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 35 sqmm EPKT 3362
8
147354
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
8
189853
23731.72
M.S.channel ISLC75 (75X40X6mm)
252
23767
94.32
M.S.channel ISLC75 (75X40X6mm)
352
33199
94.32
Back clamps of 75X8mm Flat
32
6626
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
16
3170
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
12
43476
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
12
301120
25093.35
Red Oxide Metal Primer conforming to IS: 2074
24
4648
193.67
Aluminium paint
16
6674
417.13
Danger Board 11000Volts
4
506
126.63
Danger Board 440Volts
4
375
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
8
16418
2052.28
Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
4
27606
6901.71
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
4
8709
2177.42
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
4
201705
50426.25
NAMCHI DIVISION - INSTALLATION OF NEW 500 KVA 11/0.43 kV PACKAGED SUB-STATION
-
-
-
PACKAGED SUB-STATIONS 11/0.433 KV CONSISTING OF 3 WAY SF6 / VCB INSULATED COMPACT RMU, OIL COOLED (ALUMINUM WOUND)/ DRY TYPE COPPER WOUND TRANSFORMER AND L.T SECTION WITH ONE ACB AS INCOMING AND 3 NOS OUTGOING MCCB FEEDERS AND WITH ENCLOSER MADE OF ELECTROMECHANICALLY GALVANIZED:- 500 KVA Oil cooled transformer (Al)
1
3532203
3532203.21
Placement of 100 KVA to 500 KVA Compact Packaged Substation on parapet of size 3.3mtrx2.75x0.5mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
27207
27207.6
Fencing for 400/500/630/750 KVA parapet mounted distribution sub-station of size 3.5x4 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No. 3/F/E&PD/400-750 KVA.
1
63111
63111.77
NAMCHI DIVISION - 3.5 x 240 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 240 sqmm
1050
3331826
3173.17
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia
1000
1860698
1860.7
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 240 sqmm
2
26389
13194.72
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
1
270146
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
5
750401
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
6
150917
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
28
33370
1191.8
Aluminum thimble ring 240sqmm
8
810
101.3
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
1000
532735
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
6
13064
2177.42
NAMCHI DIVISION - 3.5 x 185 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm
2100
5208903
2480.43
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
2000
1748960
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm
4
52778
13194.72
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
2
540293
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
10
1500804
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
12
301835
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
56
66740
1191.8
Aluminum thimble ring 185sqmm
16
953
59.59
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2000
1065470
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
12
26129
2177.42
NAMCHI DIVISION - 3.5 x 150 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 150 sqmm
2100
4198414
1999.25
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
2000
1748966
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 150 sqmm
4
30015
7503.87
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
2
540293
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
10
1500803
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
12
301835
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
56
66740
1191.8
Aluminum thimble ring 150sqmm
16
762
47.67
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2000
1065470
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
12
26129
2177.42
NAMCHI DIVISION - 3.5 x 120 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 120 sqmm
2100
3547691
1689.38
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
2000
1748966
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 120 sqmm
4
38411
9602.93
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
2
540293
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
10
1500803
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
12
301835
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
56
66740
1191.8
Aluminum thimble ring 120 sqmm
16
595
37.24
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2000
1065470
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
12
26129
2177.42
NAMCHI DIVISION - 4 x 16 sq.mm New LT Underground Feeder
-
-
-
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
2000
807440
403.72
Aluminum thimble ring 16sqmm
416
3719
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
1000
184730
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
200
42904
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
2
44692
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
1200
639282
532.74
NAMCHI DIVISION - MIXED TYPE LT CABLE FOR SERVICE CONNECTION
-
-
-
2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
2000
527380
263.69
2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
2000
595900
297.95
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
1000
403720
403.72
Aluminum thimble ring 10 & 16sqmm
1040
9297
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
2500
461825
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
500
107260
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
5
111731
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
3000
1598205
532.74
NAMCHI DIVISION - 3x50+1x35+1x16 sq.mm, LT Aerial Bunched Cables
-
-
-
8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21
36
1034917
28747.71
8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs.
24
423506
17646.09
3 x 50 sq.mm + 1 x 16 sq.mm + 1 x 35 sq.mm, 1.1 KV with aluminum alloy bare messenger wire
3150
1661221
527.37
LT A.B Cable tension clamps (Galvanized)
60
37094
618.25
LT A B cable Suspension clamps (Galvanized)
60
29675
494.6
Clamps for neutral for AB Cable
60
2949
49.16
LT Dead End Clamp for L.T.A.B Cable
60
34770
579.51
Service Rings half round
60
10547
175.79
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
240
24312
101.3
Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm)
210
30971
147.49
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
45
70189
1559.77
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
24
602240
25093.35
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
60
13675
227.93
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
30
78748
2624.94
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
30
50815
1693.85
Anti-Climbing Device (Barbed Wire)
120
11262
93.85
11 KV Caution Board
60
8402
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
108.15
20945
193.67
Aluminium paint @ 1.0 ltr / pole
60
25027
417.13
Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
60
123136
2052.28
Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
45
46980
1044.02
NAMCHI DIVISION - 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables
-
-
-
8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21
24
689944
28747.71
8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs.
16
282337
17646.09
3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV with aluminum alloy insulated messenger wire
2100
1833287
872.99
LT A.B Cable tension clamps (Galvanized)
40
24729
618.25
LT A B cable Suspension clamps (Galvanized)
40
19783
494.6
Clamps for neutral for AB Cable
40
1966
49.16
LT Dead End Clamp for L.T.A.B Cable
40
23180
579.51
Service Rings half round
40
7031
175.79
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
160
16208
101.3
Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm)
140
20647
147.49
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
30
46793
1559.77
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
16
401493
25093.35
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
40
9117
227.93
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
20
52498
2624.94
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
20
33876
1693.85
Anti-Climbing Device (Barbed Wire)
80
7508
93.85
11 KV Caution Board
40
5601
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
72.09
13961
193.67
Aluminium paint @ 1.0 ltr / pole
40
16685
417.13
Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
40
82091
2052.28
Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
30
31320
1044.02
NAMCHI DIVISION - 3 x 95 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables
-
-
-
8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21
24
689944
28747.71
8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs.
16
282337
17646.09
3 x 95 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV aluminum alloy insulated messenger wire 1100V
2100
2277529
1084.54
LT A.B Cable tension clamps (Galvanized)
40
24729
618.25
LT A B cable Suspension clamps (Galvanized)
40
19783
494.6
Clamps for neutral for AB Cable
40
1966
49.16
LT Dead End Clamp for L.T.A.B Cable
40
23180
579.51
Service Rings half round
40
7031
175.79
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
180
18234
101.3
Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm)
180
26547
147.49
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
40
62390
1559.77
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
20
501866
25093.35
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
40
9117
227.93
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
22
57748
2624.94
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
18
30489
1693.85
Anti-Climbing Device (Barbed Wire)
73.2
6870
93.85
11 KV Caution Board
40
5601
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
60
11620
193.67
Aluminium paint @ 1.0 ltr / pole
40
16685
417.13
Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
40
82091
2052.28
Concreting of LT Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
40
41760
1044.02
SORENG DIVISION - NEW 1 no x 5 MVA 66/11 kV POWER TRANSFORMER
-
-
-
66/11 KV, 5 MVA Power transformer
1
16824908
16824908.76
SF6, 800amps 72.5 KV, 13.1 KA rated short circuit complete with operating mechanism and first filling of SF6 gas with supporting structure.
1
2268186
2268186.09
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm
230
108617
472.25
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm
229
48784
213.03
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm
230
54480
236.87
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm
220
88163
400.74
Indoor switchgear VCB panel for 11 KV Line feeder (Incomer)
1
1092669
1092669.06
Indoor switchgear VCB panel for 11 KV (bus sectionalizer)
1
928769
928769.74
Indoor switchgear VCB pannel for 11 kV line feeder ( outgoing )
2
2185338
1092669.06
200 KVA, 11/0.433 KV , 3-phase (outdoor type) with first filling of oil with off load tapping + 2.5 %, + 5% with copper winding.
1
922724
922724.34
Fencing for 200KVA parapet mounted distribution substation of size 3x3 mtrs. constructed with 50x50x5mm MS angle vertical props, 35x35x6mm MS angle supports (double run), G.I. wire mesh, 50x6mm MS Flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc.
1
63032
63032.81
L.T. distribution Switch Board, outdoor type kiosk , 400 Amp, having electrolytic annealed copper bus bar 50x12 mm for phase & 50x6 mm for neutral circuits mounted on glazed porcelain or bakelite base and fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps, cabin light, fabricated with 12 gauge M.S. plain sheet, painted with anti rust primer & two coats of Epoxy paint of sade 631 as per IS:5, front & back opening doors with Gasket and locking arrangement complete. Incoming : 1 No. 400A, 415 V, FP MCCB breaking capacity 50 KA with built in Thermo Magnetic Release. Outgoing : 1 No. 200A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 3 Nos. 100A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release. 1 No. 63A TP MCCB breaking capacity 35 KA with built in Thermo Magnetic Release.
1
272475
272475.28
11 KV XPLE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR. - 1 core X 300 sqmm
271
488907
1804.09
HEAT SHRINKABLE OUTDOOR TYPE END TERMINATION KIT FOR 11 KV CABLE- 1 core X 300 sqmm
6
42127
7021.19
11 KV 3 core XLPE cable for outgoing feeders 3 X 95 sqmm
190
624696
3287.88
11 KV 3 core XLPE cable for outgoing feeders 3 X 120 sqmm
186
507081
2726.24
Heat shrinkable outdoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EOKT -3332-3382) ( Raychem make or equivalent) 3 C x 120 sqmm EPKT 3362
6
134989
22498.21
Heat shrinkable outdoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EOKT -3332-3382) ( Raychem make or equivalent) 3 C x 095 sqmm EPKT 3352
6
125711
20951.84
Heat shrinkable indoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EPKT -3091-3131) ( Raychem make or equivalent) 3 C x 120 sqmm EPKT 3111
4
62271
15567.89
Heat shrinkable indoor type end termination kit for 6.6 kV (UE) / 11 kV (E) 3 core XLPE (Kit No. EPKT -3091-3131) ( Raychem make or equivalent) 3 C x 095 sqmm EPKT 3101
8
104067
13008.5
Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429)
32.69
2775
84.92
Dry powder type extinguisher of 50lb capacity mounted on wheel
2
47526
23763
CO2 Fire Extinguisher of 4.5 kg capacity wall mounted
3
39374
13124.7
Foam type Fire Extinguisher of one gallon capacity wall mounted
3
51324
17108.29
Laying of hand packed stone in switchyard and other control room repair works
1
595900
595900
SORENG DIVISION - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION
-
-
-
11 KV, 800 Amp indoor VCB Panels - Incomer
1
1092669
1092669.06
11 KV, 800 Amp indoor VCB Panels - Outgoing Feeders
3
3278007
1092669.06
11 KV XLPE INSULATED ARMOURED CABLE WITH ALUMINIUM CONDUCTOR - 3 x 95 sq mm
285
724755
2543
Heat shrinkable Indoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm
4
52033
13008.5
Heat shrinkable outdoor type end termination kit for 11 KV XLPE cable 3 x 95 sq mm
12
251422
20951.84
Dry type maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required.
1
572064
572064
Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation.
1
349595
349595.16
110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 10 x 2.5 sq.mm
300
207373
691.24
1.1 KV heavy duty PVC insulated PVC sheathed copper conductor control cable armoured 4 x 2.5 sq.mm
300
59441
198.14
Fire extinguisher 4.5 Kg DCP Type
5
46599
9319.88
Fire extinguisher 4.5 Kg CO2 Type
4
52498
13124.7
Fire extinguisher 22.5 Kg CO2 type
4
155780
38945.05
12 Fire buckets with stand
12
33859
2821.59
M.S angle 50mmx50mmx6mm
340.25
32091
94.32
75x12 mm G.I Flats for risers for equipments, columns and structure
0.85
114933
135215.67
Electrically insulated 11KV mats in front of electrical control panel 1m x2.5mx8mm one side checkered finished
12
26815
2234.63
Safe Earthing model T-39 short time current 50 KA rms for 1 sec (EHV) application 80 mm dia x 3 mtrs. Electrode & two bags backfill chemical compound for auxilary transformer and control room
6
190121
31686.98
G.I Strips 35x6 mm of 1 Mtr length conforming to IS 227.
100
13705
137.06
Repair works of existing structure
1
1191800
1191800
SORENG DIVISION - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM XLPE ARMOURED CABLE
-
-
-
3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II
5250
13350765
2543
110 mm dia. (95/70/50/35 sq.mm) Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex)
5000
4372415
874.48
G.I Pipe 6" Heavy Duty
50
154114
3082.29
G.I Pipe 4" Heavy Duty
50
103686
2073.73
Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm
10
341987
34198.7
Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm
10
209518
20951.84
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
5000
2663675
532.74
SORENG DIVISION - 500 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. 500 KVA, 11/0.43KV Copper Wound
1
1627958
1627958.58
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 1000 A INCOMING: 1 No. 1000 A, 4P,50KA, MDO ACB. OUTGOING: 1 No. 400 A TP MCCB, 50 KA, 3 No. 200A TP MCCB, 50 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
1
685582
685582.95
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
1
28065
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
1
17963
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
10
15850
1585.09
Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 35 sqmm EPKT 3362
2
36838
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
2
47463
23731.72
M.S.channel ISLC75 (75X40X6mm)
63
5941
94.32
M.S.channel ISLC75 (75X40X6mm)
88
8299
94.32
Back clamps of 75X8mm Flat
8
1656
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
4
792
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
3
10869
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
3
75280
25093.35
Red Oxide Metal Primer conforming to IS: 2074
6
1162
193.67
Aluminium paint
4
1668
417.13
Danger Board 11000Volts
1
126
126.63
Danger Board 440Volts
1
93
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
2
4104
2052.28
Placement of 500 KVA distribution Transformer on parapet of size 1.5x1.5x1mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
1
10208
10208.96
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
1
2177
2177.42
Fencing for 400/500/630/750 KVA parapet mounted distribution sub-station of size 3.5x4 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No. 3/F/E&PD/400-750 KVA.
1
63111
63111.77
SORENG DIVISION - 100 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. - 100 KVA, 11/ 0.433 KV, Copper Wound
1
574434
574434.19
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 200 A INCOMING: 1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
1
163485
163485.17
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
1
28065
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
1
17963
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
10
15850
1585.09
Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm
2
36838
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
2
47463
23731.72
M.S.channel ISLC75 (75X40X6mm)
63
5941
94.32
M.S.channel ISLC75 (75X40X6mm)
88
8299
94.32
Back clamps of 75X8mm Flat
8
1656
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
4
792
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
3
10869
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
3
75280
25093.35
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
6
1162
193.67
Aluminium paint @ 1.0 ltr / pole
4
1668
417.13
Danger Board 11000Volts
1
126
126.63
Danger Board 440Volts
1
93
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
2
4104
2052.28
Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
6901
6901.71
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
1
2177
2177.42
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
1
50426
50426.25
SORENG DIVISION - INSTALLATION OF NEW 250 KVA 11/0.43 kV PACKAGED SUB-STATION
-
-
-
PACKAGED SUB-STATIONS 11/0.433 KV CONSISTING OF 3 WAY SF6 / VCB INSULATED COMPACT RMU, OIL COOLED (ALUMINUM WOUND)/ DRY TYPE COPPER WOUND TRANSFORMER AND L.T SECTION WITH ONE ACB AS INCOMING AND 3 NOS OUTGOING MCCB FEEDERS AND WITH ENCLOSER MADE OF ELECTROMECHANICALLY GALVANIZED:- 250 KVA Oil cooled transformer (Al)
1
2622658
2622658.69
Placement of 100 KVA to 500 KVA Compact Packaged Substation on parapet of size 3.3mtrx2.75x0.5mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
27207
27207.6
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
1
50426
50426.25
SORENG DIVISION - 3.5 x 240 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 240 sqmm
1050
3331826
3173.17
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia
1000
1860698
1860.7
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 240 sqmm
2
26389
13194.72
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
1
270146
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
5
750401
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
6
150917
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
28
33370
1191.8
Aluminum thimble ring 240sqmm
8
810
101.3
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
1000
532735
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
6
13064
2177.42
SORENG DIVISION - 3.5 x 185 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm
2100
5208911
2480.43
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
2000
1748966
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm
4
52778
13194.72
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
2
540293
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
10
1500803
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
12
301835
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
56
66740
1191.8
Aluminum thimble ring 185sqmm
16
953
59.59
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2000
1065470
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
12
26129
2177.42
SORENG DIVISION - 3.5 x 120 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 120 sqmm
4200
7095383
1689.38
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
4000
3497932
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 120 sqmm
8
76823
9602.93
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
4
1080587
270146.8
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
20
3001607
150080.4
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
24
603670
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
112
133481
1191.8
Aluminum thimble ring 120 sqmm
32
1191
37.24
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
4000
2130940
532.74
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
24
52258
2177.42
SORENG DIVISION - 3.5 x 50 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 50 sqmm
1050
832174
792.55
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 75 mm dia
600
254747
424.58
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 50 sqmm
20
150077
7503.87
Aluminum thimble ring 50sqmm
8
143
17.88
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
600
319641
532.74
SORENG DIVISION - 4 x 16 sq.mm New LT Underground Feeder
-
-
-
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
1000
403722
403.72
Aluminum thimble ring 16sqmm
208
1859
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
500
92364
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
100
21452
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
1
22346
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
600
319641
532.74
SORENG DIVISION - MIXED TYPE LT CABLE FOR SERVICE CONNECTION
-
-
-
2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
1600
421897
263.69
2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
1600
476720
297.95
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
800
322977
403.72
Aluminum thimble ring 10 & 16sqmm
832
7437
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
2000
369458
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
400
85809
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
4
89385
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
2400
1278564
532.74
SORENG DIVISION - 3 x 50 sq.mm + 1 x 80 sq.mm HT Aerial Bunched Cables
-
-
-
11 KV AERIAL BUNCHED CABLE (ABC) 3x50 + 1x70 sqmm
1050
844688
804.47
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
20
474634
23731.72
9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs
13
445415
34262.76
AB Cable hanging clamps / tension clamps (Galvanized)
30
27932
931.09
11 KV Suspension Clamp with attachment for AB Cable
12
9170
764.24
J-Hook for laying of 11 KV AB cable
42
5568
132.59
J-Hook Clamp for laying of 11 KV AB cable
42
5881
140.04
Straight through Joint kit suitable for 95 - 120 sqmm
3
15624
5208.17
T-Jointing kit for 95 -120 sqmm
1
6604
6604.06
Termination kit for 95 - 120 sqmm
15
49541
3302.78
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
6
17251
2875.22
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
16
401493
25093.35
Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required.
33
7521
227.93
Anti-Climbing Device (Barbed Wire)
66
6194
93.85
11 KV Caution Board
33
4621
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
49.5
9586
193.67
Aluminium paint @ 1.0 ltr / pole
33
13765
417.13
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
33
67725
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
6
6264
1044.02
SORENG DIVISION - 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables
-
-
-
8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21
12
344972
28747.71
8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs.
8
141168
17646.09
3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV with aluminum alloy insulated messenger wire
1050
916643
872.99
LT A.B Cable tension clamps (Galvanized)
20
12364
618.25
LT A B cable Suspension clamps (Galvanized)
20
9891
494.6
Clamps for neutral for AB Cable
20
983
49.16
LT Dead End Clamp for L.T.A.B Cable
20
11590
579.51
Service Rings half round
20
3515
175.79
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
80
8104
101.3
Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm)
70
10323
147.49
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
15
23396
1559.77
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
8
200746
25093.35
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
20
4558
227.93
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
10
26249
2624.94
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
10
16938
1693.85
Anti-Climbing Device (Barbed Wire)
40
3754
93.85
11 KV Caution Board
20
2800
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
36.05
6980
193.67
Aluminium paint @ 1.0 ltr / pole
20
8342
417.13
Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
20
41045
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
15
15660
1044.02
SORENG DIVISION - LED STREET-LIGHTING SYSTEM
-
-
-
LED Street light 45 Watt
120
1598025
13316.88
1.0 sqmm. ISI marked FRLSH PVC insulated Single core industrial multistrand copper conductor voltage grade upto 1100 V.
5104
76039
14.9
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED 4 Core x 16 sqmm
4200
1695632
403.72
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
4000
738916
184.73
Polycarbonate junction box with bus bar arrangement & 6 Amp MCB
120
158568
1321.41
Red oxide paint.
180
34860
193.67
Al.paint.
120
50055
417.13
SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 2 Mtrs. Electrode & one bag backfill chemical compound.
8
128952
16119.1
G.I Earth Spike conforming to IS 227.
120
179485
1495.71
G.I.street light bracket
120
142479
1187.33
8.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs
120
2608254
21735.45
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
4000
2130940
532.74
Concreting of above 8.5 mtr pole in 1:4:8 mix ccm in 54'x2'x2'depth earth pit and plastered parapet
120
286032
2383.6
GYALSHING - NEW 1 no x 5 MVA 66/11 kV POWER TRANSFORMER
-
-
-
66/11 KV, 5 MVA, POWER TRANSFORMER
1
16824908
16824908.76
SF6, 800amps 72.5 KV, 13.1 KA rated short circuit complete with operating mechanism and first filling of SF6 gas with supporting structure.
1
2268186
2268186.09
72.5 KV, 3 core current transformer having ratio 400 -300-200/1+1+1 A and of accuracy class and burden of 30 VA with first filling of oil and complete with terminal connectors.
3
795258
265086.12
60 kV Lightning arrestor complete with insulating base and surge monitors & connector terminals connection.
3
368887
122962.48
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 12 x 1.5 sq. mm
500
236125
472.25
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 2 x 2.5 sq. mm
500
106515
213.03
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 4 x 1.5 sq. mm
500
118435
236.87
1.1 kV grade heavy duty PVC insulated sheathed copper conductor cable 8 x 2.5 sq.mm
500
200370
400.74
Indoor switchgear VCB panel for 11 KV Line feeder (Incomer)
2
2185338
1092669.06
Indoor switchgear VCB panel for 11 KV (bus sectionalizer)
2
1857539
928769.74
Indoor switchgear VCB pannel for 11 kV line feeder ( outgoing )
6
6556014
1092669.06
Overhead Shielding wire of size 7/3.15 mm of 100 Kg.F/M (600*0.429)
91.86
7800
84.92
3 x 300 sqmm, 11 KV(E) XLPE, Al. Conductor cable.
172
907334
5275.2
Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size; (3x300 sqmm)
2
50591
25295.96
Heat shrinkable indoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size; (3x300 sqmm)
2
33218
16609.22
GYALSHING - AUGMENTATION OF EXISTING 11/ 11 KV SWITCHING STATION
-
-
-
11 KV, 800 Amp indoor VCB Panels - Incomer
1
1092669
1092669.06
11 KV, 800 Amp indoor VCB Panels - Outgoing Feeders
3
3278007
1092669.06
Dry type maint free battery packs of capacity 200 AH 55 nos x 2 volt with terminal voltage of 110 volt complete with all accessories as required.
1
572064
572064
Battery charging sets, one for trickle charging and other for boost charging suitable for operation as detailed in the specification . Each charging set shall be complete with necessary transformers proective control gear, indicating instrument such as ammeters, voltmeters and indicating lamps and other accessories all suitably mounted for its satisfactory operation.
1
349595
349595.16
110V DCDB totally enclosed metal clad type complete with copper bus bar, cable socket, 200A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
415V ACDB totally enclosed metal clad type complete with copper bus bar, cable socket, 400A MCCB for incoming and required MCB of 32A DP, 64A FP for outgoing to 66KV & 11KV CR panel in control room.
1
303982
303982
GYALSHING - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 120 SQ.MM XLPE ARMOURED CABLE
-
-
-
3 x 120 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II
800
2318051
2897.56
160 mm. dia. (240/185/150/120 sq.mm) Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex)
800
1488560
1860.7
G.I Pipe 6" Heavy Duty
10
30822
3082.29
G.I Pipe 4" Heavy Duty
10
20737
2073.73
Aluminium Thimble of size 120 sq.mm
12
858
71.51
Heat shrinkable outdoor type end termination kit 6.35 KV (Uo)/11 KV (U) 3 coreXLPE (Kit No. EOKT 3332-3382) 3 C X 120 sqmm EPKT 3362
4
89992
22498.2
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
800
426188
532.74
GYALSHING - NEW 11 KV UNDERGROUND FEEDER WITH 3 X 95 SQ.MM XLPE ARMOURED CABLE
-
-
-
3 x 95 sq.mm, 6.6 KV(UE)/11 KV(E) XLPE insulated armoured cable with Aluminium conductor confirming to IS: 7098 part II
800
2034400
2543
110 mm dia. (95/70/50/35 sq.mm) Rigid U PVC pipe as per IS 4985-2000 working pressure 6Kgf/cm2 (Finolex)
800
699584
874.48
G.I Pipe 6" Heavy Duty
10
30822
3082.29
G.I Pipe 4" Heavy Duty
10
20737
2073.73
Heat shrinkable straight through jointing kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size3 x 95 q.mm
2
68397
34198.7
Heat shrinkable outdoor type end termination kit (Raychem make or equivalent) suitable for 3 core 11 kV XLPE cable of size 3 x 95 sq.mm
4
83807
20951.84
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
800
426188
532.74
GYALSHING - NEW 11 kV LINE ON 11 KV COVERED CONDUCTOR 70 SQMM
-
-
-
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
20
474634
23731.72
Covered conductor 70 Sq. mm.
3090
3309791
1071.13
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
12
37970
3164.23
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
12
8437
703.16
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
60
189853
3164.23
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
60
232043
3867.39
Insulating Piercing Connector
12
44299
3691.6
11 KV Tension Mid Span Jointing Kit for Covered Conductor
3
31114
10371.64
11 KV Termination Kit for Covered Conductor
3
25841
8613.73
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
10
28752
2875.22
M.S Channel ISLC75 ( 75x40x6mm) SAIL Brand conforming to IS: 808
50
4738
94.76
Back Clamps 75 x 8 mm flat for holding the channels
48
9939
207.08
11 KV Disc Insulator70 KN T/C Type (Porcelain/Polymer)
10
15716
1571.69
Complete hardware fittings for 11 kv disc insulator t/c type conforming to is: 731 suitable for Squirrel Conductor
10
3143
314.34
M.S Nuts & Bolts 16mm diax 40mm full thread conforming to IS: 1364
10
1981
198.14
SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
6
150560
25093.35
Aluminum thimble ring 50sqmm
6
107
17.88
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
10
15597
1559.77
Red Oxide Metal Primer conforming to IS: 2074
35
6778
193.67
Aluminum Paint conforming to IS: 2339
20
7359
367.97
Danger Board 11000Volts
20
2532
126.63
G.I Barbed Wire
40
3754
93.85
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
10
10440
1044.02
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
20
41045
2052.28
GYALSHING - NEW 11 kV LINE ON 11 KV COVERED CONDUCTOR 50 SQMM
-
-
-
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
30
711951
23731.72
Covered conductor 70 Sq. mm.
3090
2743580
887.89
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
30
94926
3164.23
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
12
8437
703.16
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
60
189853
3164.23
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
60
232043
3867.39
Insulating Piercing Connector
12
44299
3691.6
11 KV Tension Mid Span Jointing Kit for Covered Conductor
3
31114
10371.64
11 KV Termination Kit for Covered Conductor
3
25841
8613.73
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
10
28752
2875.22
M.S Channel ISLC75 ( 75x40x6mm) SAIL Brand conforming to IS: 808
50
4738
94.76
Back Clamps 75 x 8 mm flat for holding the channels
48
9939
207.08
11 KV Disc Insulator70 KN T/C Type (Porcelain/Polymer)
10
15716
1571.69
Complete hardware fittings for 11 kv disc insulator t/c type conforming to is: 731 suitable for Squirrel Conductor
10
3143
314.34
M.S Nuts & Bolts 16mm diax 40mm full thread conforming to IS: 1364
10
1981
198.14
SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
6
150560
25093.35
Aluminum thimble ring 50sqmm
6
107
17.88
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
10
15597
1559.77
Red Oxide Metal Primer conforming to IS: 2074
35
6778
193.67
Aluminum Paint conforming to IS: 2339
20
7359
367.97
Danger Board 11000Volts
20
2532
126.63
G.I Barbed Wire
40
3754
93.85
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
10
10440
1044.02
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
30
61568
2052.28
GYALSHING - CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 70 SQMM COVERED CONDUCTOR
-
-
-
11.0 Mtr. Long Steel Lattice Structure with (65 x 65 x 6 mm) M.S. angle suitable for Covered 99 sqmm Conductor including all nuts & bolts complete without arms.
5
197265
39453.05
Covered conductor 70 Sq. mm.
2800
2999164
1071.13
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
36
113912
3164.23
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
36
25313
703.16
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
62
196182
3164.23
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
62
239778
3867.39
Insulating Piercing Connector
15
55374
3691.6
11 KV Tension Mid Span Jointing Kit for Covered Conductor
2
20743
10371.64
11 KV Termination Kit for Covered Conductor
2
17227
8613.73
M.S.channel 75X40X6mmX2.2 m long for DP.
40
3772
94.32
Back clamps of 75x8mm M.S. flat for holding channel.
15
3106
207.08
M.S. nuts & bolts of 16mm dia.X 40mm length.
2
396
198.14
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
66.02
6227
94.32
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
5
471
94.32
Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
3
15110
5036.84
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
3
8625
2875.22
Red oxide paint
10
1936
193.67
Aluminium paint
7.5
2759
367.97
G.I. Barbed Wire
10
938
93.85
11 kV Caution Board
5
633
126.63
G.I. Wire 4 mm (8-SWG) for Continuous Earth
25
2346
93.85
Concreting of 11Mtrs Lattice Structure in 1:4:8 cc in 0.9x0.9x2.05mtrs cement plaster of parapet in 1:4 mix.
5
19468
3893.61
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
3
3132
1044.02
GYALSHING - CONVERSION OF EXISTING 11 KV OVERHEAD LINE ON ACSR BARE CONDUCTORS TO 50 SQMM COVERED CONDUCTOR
-
-
-
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
5
118658
23731.72
Covered conductor 50 Sq. mm.
3090
2743580
887.89
11 KV Class Polymeric Pin Insulator for covered conductor with GI Pin, Nuts & Bolts
36
113912
3164.23
Metallic Ties (Top / Side) for 11 KV Class Polymeric Insulator
36
25313
703.16
11 KV Polymeric Tension Insulator, 70 KN with Clamps, Nuts & Bolts
62
196182
3164.23
11 KV Class Polymeric Tension Hardware with Clamps, Nuts & Bolts
62
239778
3867.39
Insulating Piercing Connector
13
47990
3691.6
11 KV Tension Mid Span Jointing Kit for Covered Conductor
2
20743
10371.64
11 KV Termination Kit for Covered Conductor
2
17227
8613.73
M.S.channel 75X40X6mmX2.2 m long for DP.
40
3772
94.32
Back clamps of 75x8mm M.S. flat for holding channel.
15
3106
207.08
M.S. nuts & bolts of 16mm dia.X 40mm length.
2
396
198.14
M.S. channel 75X 40X 6mm 1.8 m long for S.P.structure.
66.2
6243
94.32
Pole top channel 75X40X 6mmX0.3m long S.P. structure.
5.02
473
94.32
Line Earthing: 25 x 3 mm G.I. Flat with perforated G.I. pipe of 19mm dia x 95 cm. and 38 mm dia x 250 cm combination with Reducer, Funnel and Cover Arrangement as per design to be provided and Salt (80 Kgs) & Charcoal (3 bags) Combination etc.
3
15110
5036.84
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
3
8625
2875.22
Red oxide paint @ 2 ltr/ pole
10
1936
193.67
Aluminium paint @ 1.5 ltr / pole
7.5
2759
367.97
G.I. Barbed Wire
10
938
93.85
11 kV Caution Board
5
633
126.63
G.I. Wire 4 mm (8-SWG) for Continuous Earth
25
2346
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
5
10261
2052.27
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
3
3132
1044.02
GYALSHING - 250 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, ONAN COOLED, OUTDOOR/INDOOR TYPE DISTRIBUTION TRANSFORMER PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS: 1180(PART-I)2014:ENERGY EFFICIENCY LEVEL 2 -- 250 KVA, 11/ 0.433 KV, Copper Wound
2
2070809
1035404.56
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 630 A INCOMING: 1 No. 630 A, 4P,50KA, MDO ACB. OUTGOING: 3 Nos. 200A TP MCCB, 50 KA & 1 No. 63A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
2
1283270
641635.33
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
2
56130
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
2
35926
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
20
31701
1585.09
Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm
4
73677
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
4
94926
23731.72
M.S.channel ISLC75 (75X40X6mm)
126
11884
94.32
M.S.channel ISLC75 (75X40X6mm)
176
16600
94.32
Back clamps of 75X8mm Flat
20
4141
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
56
11095
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
6
21738
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
6
150560
25093.35
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
4
774
193.67
Aluminium paint @ 1.0 ltr / pole
4
1668
417.13
Danger Board 11000Volts
4
506
126.63
Danger Board 440Volts
4
375
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
4
8209
2052.28
Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
2
13803
6901.71
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
2
4354
2177.42
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
2
100852
50426.25
GYALSHING - 100 KVA, OIL COOLED, NEW DISTRIBUTION TRANSFORMER
-
-
-
50 HZ, DYN 11, 3 PHASE, ONAN COOLED, OUT-DOOR TYPE DISTRIBUTION TRANSFORMER WITH OFF-CIRCUIT TAPPING +2.5%, +5%, ON H.V SIDE WITH BARE BUSHING ON HV & LV SIDE & PROVIDED WITH STANDARD FITTINGS & ACCESSORIES WITH FIRST FILLING OF TRANSFORMER OIL CONFORMING TO IS:1180(PART-I)2014:ENERGY EFFICIENCY LEVEL -2. - 100 KVA, 11/ 0.433 KV, Copper Wound
1
574434
574434.19
L.T distribution switch board with copper bus bar, out-door type Kiosk, having electrolytic annealed copper bus bar 50x12mm for phase & 50x6mm for neutral circuits mounted on glazed porcelain or Bakelite base & fitted with voltmeter, ammeter, selector switches for ammeter & voltmeter, electronic KWH meter, indicating lamps cabin light, fabricated with 12 gauge M.S plain sheet, painted with anti- rust primer & two coats of Epoxy paint of shade 631 as per IS: 8623-1, front opening doors with gasket & locking arrangement complete with following incoming & outgoing controls: LTDB 200 A INCOMING: 1 No. 200 A, 4P,50KA, MCCB OUTGOING: 3 Nos. 100A TP MCCB, 35 KA, & 1 No. 32A TP MCCB, 35 KA all with built in Thermo Magnetic Release.
1
163485
163485.16
11 KV, 3 Pole 400amp, Air Break G.O.S tilting type, three insulator per phase, complete with all fittings conforming to IS:9920 & IS: 9921 (Porcelain/Polymer)
1
28065
28065.4
11 KV, 3 Pole, 400 amp. D.O.F Unit complete with all accessories conforming to IS: 9385 (Porcelain/Polymer)
1
17963
17963.41
3 X 35 sq.mm 11 KV XPLE Cable
10
15850
1585.09
Heat Shrinkable Outdoor type end termination kit for 11 KV (E) 3 core XLPE (Kit No.EOKT 3091-3131) Raychem make or equivalent : 3 C X 35 sqmm
2
36838
18419.27
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
2
47463
23731.72
M.S.channel ISLC75 (75X40X6mm)
63
5942
94.32
M.S.channel ISLC75 (75X40X6mm)
88
8300
94.32
Back clamps of 75X8mm Flat
8
1656
207.08
M.S. nuts & bolts of 16mm dia.X 40mm Full thread IS: 1364
4
792
198.14
9 KV, 10 KA Single pole unit Metal Oxide Gapless Surge Arrestor for 11 KV, 50 c/s solidly earthed neutral system conforming to IS:3070 (Part 3)
3
10869
3623.07
50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
3
75280
25093.35
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
6
1162
193.67
Aluminium paint @ 1.0 ltr / pole
4
1668
417.13
Danger Board 11000Volts
1
126
126.63
Danger Board 440Volts
1
93
93.85
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
2
4104
2052.27
Placement of 100 & 300 KVA Distribution Transformer on parapet of size 1.2x1.2x1mtrs. In 1:3:6 cc Mix including 12 mm thick cement plaster in 1:4 Mix.
1
6901
6901.71
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
1
2177
2177.41
Fencing for 100/150/200/315 KVA parapet mounted distribution sub-station of size 3x3 mtrs.constructed with 50x50x5mm M.S angle vertical props, 35x35x6mm M.S angle supports(double run), M.S wire mesh, 50x6mm M.S flat iron for clamping wire mesh complete with gate with locking arrangement, site development, concreting of props in 1:2:4 cc i/c soling & flooring works in 1:4:8 cc as per Layout No.2/F/E&PD/100-315 KVA.
1
50426
50426.24
GYALSHING - 3.5 x 300 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 300 sqmm
500
1941890
3883.78
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia
450
837315
1860.7
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 300 sqmm
4
52778
13194.72
Main Feeder Panel: Cubicle design totally enclosed and water proof outdoor type floor mounted suitable for use in 440 V,400A main feeder pillar Incomer : 1 No 400 A, MCCB, 50KA Outgoing: 2 Nos. 200 A TPN MCCB & 4 Nos. 32 A TPN, MCB for individual service connections.
2
540293
270146.8
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
2
50305
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
8
9534
1191.8
Aluminum thimble ring 240sqmm
12
1215
101.3
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
450
239728
532.73
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
2
4354
2177.42
GYALSHING - 3.5 x 240 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 240 sqmm
2200
6980974
3173.17
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 160 mm dia
2000
3721400
1860.7
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 240 sqmm
18
237504
13194.72
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
15
2251205
150080.39
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
10
251529
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
28
33370
1191.8
Aluminum thimble ring 240sqmm
60
6078
101.3
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2000
1065460
532.73
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
15
32661
2177.42
GYALSHING - 3.5 x 185 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 185 sqmm
2200
5456946
2480.43
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 110 mm dia
2100
1836408
874.48
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 185 sqmm
20
263894
13194.72
Sub-Main Feeder Panel: Cubicle design totally enclo.& water proof outdoor type floor mounted suitable for use in 440V 200 A as a sub-main feeder pillar: Incomer: 1 No. 200 A, TPN MCCB Outgoing: 3 Nos. 63 A TPN MCCB & 4 Nos. 32 A MCCB for individual service connections &8 Nos16 TPN for individual service connection.
15
2251205
150080.39
Safe earthing electrode Model T-19 short time current 20 KA rms for 1 sec (MV) application: 50 mm dia.x3 mtrs. electrode & 2 bags backfill Chemical compound.
15
377294
25152.94
Copper strips 25mm X 5mm from Cu. plate earth electrode
30
35754
1191.8
Aluminum thimble ring 185sqmm
30
1787
59.59
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2100
1118742
532.73
Placement of L.T Distribution Board on parapet of size 2x0.61x0.35x0.61 mtrs. In 1:3:6 cc Mix including 12mm thick cement plaster in 1:4 Mix.
15
32661
2177.42
GYALSHING - 3.5 x 50 sq.mm New LT Underground Feeder
-
-
-
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED - 3.5 Core x 50 sqmm
1050
832177
792.55
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 - 75 mm dia
600
254748
424.58
L.T 1.1 KV HEAT SHRINKABLE INDOOR / OUTDOOR END TERMINATION KIT FOR PVC/ XLPE CABLES 2,3 &1/2 CORE CONFORMING TO IS: 13573 - 3.5 x 50 sqmm
20
150077
7503.87
Aluminum thimble ring 50sqmm
8
143
17.88
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
600
319638
532.73
GYALSHING - MIXED TYPE LT CABLE FOR SERVICE CONNECTION
-
-
-
2 core 10 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
500
131845
263.69
2 core 16 sq.mm 1.1 kV grade PVC L.T. aluminium armoured cable
500
148975
297.95
4 core 16 sqmm. 1.1 kV grade PVC L.T. aluminium armoured cable
500
201860
403.72
Aluminum thimble ring 10 & 16sqmm
208
1859
8.94
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
800
147784
184.73
FLEXIBLE SUPER PVC GREEN PIPE 3.5KG/CM2 CONFORMING TO IS: 4985-2000. - 2" dia
500
107260
214.52
Sundries like saddle, chinese nails, insulation tape, drill bits etc
1
22346
22346.25
Excavation of 0.45x0.90x1.00 m cable trench in mix soil & refilling with available excavated earth and providing concreting on the top of the trench.
1200
639276
532.73
GYALSHING - 3 x 70 sq.mm + 1 x 80 sq.mm HT Aerial Bunched Cables
-
-
-
11 KV AERIAL BUNCHED CABLE (ABC) 3x70 + 1x70 sqmm
1050
1262341
1202.23
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
20
474634
23731.72
9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs
13
445415
34262.76
AB Cable hanging clamps / tension clamps (Galvanized)
30
27932
931.09
11 KV Suspension Clamp with attachment for AB Cable
12
9170
764.24
J-Hook for laying of 11 KV AB cable
42
5568
132.59
J-Hook Clamp for laying of 11 KV AB cable
42
5881
140.04
Straight through Joint kit suitable for 95 - 120 sqmm
3
15624
5208.17
T-Jointing kit for 95 -120 sqmm
1
6604
6604.06
Termination kit for 95 - 120 sqmm
15
49541
3302.78
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
6
17251
2875.22
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
16
401493
25093.35
Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required.
33
7521
227.93
Anti-Climbing Device (Barbed Wire)
66
6194
93.85
11 KV Caution Board
33
4621
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
49.5
9586
193.67
Aluminium paint @ 1.0 ltr / pole
33
13765
417.13
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
33
67725
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
6
6264
1044.02
GYALSHING - 3 x 50 sq.mm + 1 x 80 sq.mm HT Aerial Bunched Cables
-
-
-
11 KV AERIAL BUNCHED CABLE (ABC) 3x50 + 1x70 sqmm
1050
844688
804.47
9 Mtrs. Steel lattice structure of 50x50x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 2/L/FT/E&PD/ 9 Mtrs.
21
498366
23731.72
9 Mtrs. Long 410-SP-33 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 245 Kgs
17
582466
34262.76
AB Cable hanging clamps / tension clamps (Galvanized)
30
27932
931.09
11 KV Suspension Clamp with attachment for AB Cable
12
9170
764.24
J-Hook for laying of 11 KV AB cable
42
5568
132.59
J-Hook Clamp for laying of 11 KV AB cable
42
5881
140.04
Straight through Joint kit suitable for 95 - 120 sqmm
3
15624
5208.17
T-Jointing kit for 95 -120 sqmm
1
6604
6604.06
Termination kit for 95 - 120 sqmm
15
49541
3302.78
Guy Assembly complete with 7/10 SWG Stay Wire, 140x85 mm H.T Guy Insulator, 18mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 300x300x6mm anchor plate
6
17251
2875.22
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
16
401493
25093.35
Earthing Coil of 115 turns of 50 mm dia and 2.5 Mtr lead of 40 mm GI wire etc., as required.
33
7521
227.93
Anti-Climbing Device (Barbed Wire)
66
6194
93.85
11 KV Caution Board
33
4621
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
49.5
9586
193.67
Aluminium paint
33
13765
417.13
Concreting of 9 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.75 mtrs Pit, Construction of parapet 0.61 x 0.61x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
33
67725
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
6
6264
1044.02
GYALSHING - 3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, , LT Aerial Bunched Cables
-
-
-
8.5 Mtr Steel Tubular Pole complete with Nuts & Bolts - 410-SP-21
8
229981
28747.71
8.5 Mtrs. Steel lattice structure of 35x35x6mm M.S Angle complete with nuts & bolts conforming to specification of design detail No. 3/L/FT/E&PD/ 8.5 Mtrs.
12
211753
17646.09
3 x 70 sq.mm + 1 x 16 sq.mm + 1 x 50 sq.mm, 1.1 KV with aluminum alloy insulated messenger wire
1062
927119
872.99
LT A.B Cable tension clamps (Galvanized)
20
12364
618.25
LT A B cable Suspension clamps (Galvanized)
20
9891
494.6
Clamps for neutral for AB Cable
20
983
49.16
LT Dead End Clamp for L.T.A.B Cable
20
11590
579.51
Service Rings half round
20
3515
175.79
Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)
80
8104
101.3
Piercing connector Type-I 1P/3P for single / three phase (Main 16-50 sqmm tap-off 16-50 sqmm)
72
10618
147.49
Guy Assembly complete with 7/12 SWG Stay Wire, 110x75 mm L.T Guy Insulator, 16mm diameter Stay Rod 1.8 mtrs Long with bow thimble, turn buckle & 150x150x6mm anchor plate
15
23396
1559.77
T-19 50 mm diameter x 3 Mtrs. Electrode & two bags backfill chemical compound.
8
200746
25093.35
Earthing Coil of 115 Turns of 50 MM Dia and 2.5 Mtr Lead of 4.0 mm G.I Wire
20
4558
227.93
Spring Loaded Busbar System suitable for 1 Incoming 3 Outgoing 3 Phase Circuit
10
26249
2624.94
Spring Loaded Busbar System suitable for 1 Incoming 6 Outgoing 1 Phase Circuit
10
16938
1693.85
Anti-Climbing Device (Barbed Wire)
40
3754
93.85
11 KV Caution Board
20
2800
140.04
Red Oxide Metal Primer conforming to IS: 2074 (1.5/pole)
36.05
6980
193.67
Aluminium paint @ 1.0 ltr / pole
20
8342
417.13
Concreting of 8.5 Mtrs. Lattice Structure / Swaged Steel Tubular Pole in 1:4:8 cc in 0.9x0.9x1.50 mtrs Pit, Construction of parapet 0.35 x 0.47x0.153 mtrs. In 1:3:6 cc i/c 12mm cement plaster of parapet in 1:4 Mix.
20
41045
2052.28
Concreting of H.T Guy Assembly in 1:4:8 cc in 0.40x0.40x1.05mtrs Pit.
15
15660
1044.02
GYALSHING - LED STREET-LIGHTING SYSTEM
-
-
-
LED Street light 45 Watt
80
1065350
13316.88
1.0 sqmm. ISI marked FRLSH PVC insulated Single core industrial multistrand copper conductor voltage grade upto 1100 V.
2592.21
38617
14.9
1.1 KV PVC / XLPE INSULATED HEAVY DUTY POWER CABLES FOR WORKING VOLTAGE UPTO & INCLUDING 660/1100 VOLTS ALUMINIUM CONDUCTORS ARMOURED 4 Core x 16 sqmm
2500
1009300
403.72
RIGID U PVC PIPE AS PER IS 4985-2000 WORKING PRESSURE 6 KGF/CM2 50 mm dia
2100
387933
184.73
Polycarbonate junction box with bus bar arrangement & 6 Amp MCB
80
105712
1321.41
Red oxide paint.
120
23240
193.67
Al.paint.
80
33370
417.13
SAFE EARTHING MODEL T-19 SHORT CURRENT 20KA RMS FOR 1 SEC(LV / MV) APPLICATION CONFORMING TO IS: 3043 50 mm diameter x 2 Mtrs. Electrode & one bag backfill chemical compound.
39
628644
16119.1
8.5 Mtrs. Long 410-SP-18 swaged type steel tubular pole with CI base plate & cap, double part ( Nuts & bolts type) working load 120 Kgs
80
1738836
21735.45
Excavation of 0.45x0.90x1.00mtrs. Cable trench in mix soil & re-filling with available excavated earth & providing cement concrete on the top of the trench.
2097
1117134
532.73
Concreting of above 8.5 mtr pole in 1:4:8 mix ccm in 54'x2'x2'depth earth pit and plastered parapet
80
190688
2383.6
GYALSHING - RENOVATION & ESTABLISHMENT OF ELECTRICAL STORAGE ROOM IN THE EXISTING OLD CONTROL ROOM NEAR 11/11 KV SWITCH YARD AT KYONGSHA POWER COLONEY GYALSHING, WEST SIKKIM.
-
-
-
Dismantling of Structures (Dismantling of existing structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres)
60
28603
476.72
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
7.76
8969
1156.66
Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual Means)
6.5
8606
1324.02
Providing and Laying in position cement concrete of (1:2:4) specified grade including compacting curing etc all complete.
3.25
22010
6772.36
Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete
173.99
222937
1281.32
Provision for fitting and fixing for scaffolding for plastering and painting etc.All complete. Bamboo
29
6566
226.44
Provision for fitting and fixing for scaffolding for plastering and painting etc.All complete. Labour
18
4075
226.44
Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete.
5055.12
512761
101.43
Providing, fitting, fixing of 24 BWG Pre-painted HULAS sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete
243.78
259405
1064.1
Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Pre-painted HULAS Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
30.28
22938
757.56
Providing fitting and fixing 23cm deep 24BWG GP sheet eaves board including (50x25mm) dressed sal timber beading and M.S. rod brackets complete.
60.56
39211
647.48
Providing and Laying 12mm thick cement plaster of 1:3 mix in single coat including finishing even and smooth and curing complete.
610.79
145580
238.35
Providing and Laying 40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 stone aggregate of size 12.5mm and down )flooring with floating coat of neat cement to give a smooth surface in not exceeding 02 sqm. (without glass strip) curing etc complete in all building floors wherever specified.
244.01
122507
502.06
Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete. With locally available timber.
0.5
16984
33968.45
Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.
9.69
58125
5998.51
Providing fitting and fixing water proof flush doors shutters, solid block hard core construction with frame of 1st class hard timber, with well matched 3mm commercial ply (both faces) including hinges with screws complete.
4.46
18912
4245.28
P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete.
25.18
104882
4165.32
White washing with white lime in two or more coats to give an even shade include- ding cleaning the surface to remove dirt, dust, mortar drops etc on old surface complete.
199.64
4708
23.59
Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand and manufacture to give an even shade including preparation of surface etc complete.
347.98
22631
65.04
Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on old surface.
347.98
36244
104.16
Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.
22.44
2670
119
Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
22.44
3090
137.7
Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Brass (Chromium Plated) Size 300x16mm
8
10741
1342.63
Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. Ms (Bright Finish) Size 250x16mm
8
3208
401.11
Providing and fixing Tower bolt 200x100mm with necessary screws etc complete. MS
8
1193
149.17
Providing, fitting and fixing. handles 125mm size with necessary screws etc complete. Brass (Chromium Plated)
10
2354
235.43
Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
7.63
14793
1938.87
Providing and Laying plain colored glazed ceramic tiles of size 300mm x 300mm in plain colours (white, grey, ivory platinum, leather brown etc or equivalent), on floors landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
17.97
32318
1798.49
PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification.
243.78
666242
2732.97
Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Surfaced Road
2093.52
17035
8.14
Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Loading& Unloading
51.06
13903
272.29
Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Headload of stock material (within 100 mts)
510.62
6724
13.17
Cost of Haulage excluding loading and unloading on surfaced road. SAND Surfaced Road
1839.91
14971
8.14
Cost of Haulage excluding loading and unloading on surfaced road. SAND Loading& Unloading
22.44
2852
127.11
Cost of Haulage excluding loading and unloading on surfaced road. SAND Headload of stock material (within 100 mts)
22.44
6992
311.61
Cost of Haulage excluding loading and unloading on surfaced road. STONE Surfaced Road
173.31
1410
8.14
Cost of Haulage excluding loading and unloading on surfaced road. STONE Loading& Unloading
6.18
785
127.11
Cost of Haulage excluding loading and unloading on surfaced road. STONE Headload of stock material (within 100 mts)
6.18
1925
311.61
Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Surfaced Road
922.85
7509
8.14
Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Loading& Unloading
10.23
1300
127.11
Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Headload of stock material (within 100 mts)
10.23
3187
311.61
Protective Wall - Provision for Slip and Debris Clearance and throwing of soil all complete.
90
42904
476.72
Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
13.45
13080
972.52
Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge.
62.68
276998
4419.25
Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Surfaced Road
250.1
2035
8.14
Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Loading& Unloading
6.1
1660
272.29
Cost of Haulage excluding loading and unloading on surfaced road. CEMENT Headload of stock material (within 100 mts)
61
803
13.17
Cost of Haulage excluding loading and unloading on surfaced road. SAND Surfaced Road
1387.83
11293
8.14
Cost of Haulage excluding loading and unloading on surfaced road. SAND Loading& Unloading
33.85
4302
127.11
Cost of Haulage excluding loading and unloading on surfaced road. SAND Headload of stock material (within 100 mts)
33.85
10548
311.61
Cost of Haulage excluding loading and unloading on surfaced road. STONE Surfaced Road
1010.08
8219
8.14
Cost of Haulage excluding loading and unloading on surfaced road. STONE Loading& Unloading
67.34
8559
127.11
Cost of Haulage excluding loading and unloading on surfaced road. STONE Headload of stock material (within 100 mts)
67.34
20984
311.61
Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Surfaced Road
2890.81
23523
8.14
Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Loading& Unloading
70.51
8962
127.11
Cost of Haulage excluding loading and unloading on surfaced road. STONE CHIPS Headload of stock material (within 100 mts)
70.51
21971
311.61
Cost of Haulage by manual means. EARTH Loading& Unloading
61.49
7815
127.11
Cost of Haulage by manual means EARTH Headload of stock material (within 200 mts)
61.49
38645
628.48
Provision for internal & external water supply & sanitation
1
148903
148903.49
Provision for Furniture & Furnishing
1
367062
367062.48
GYALSHING - UPGRADATION & EXTENSION OF 11/11KV CONTROL ROOM (STAGE-III) AT PELLING UNDER IPDS IN WEST SIKKIM
-
-
-
Dismantling of Structures (Dismantling of existing structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres)
5.3
2592
489.23
Provision for Chipping, Scrapping & removing of old flooring, plastering and un-serviceable portion, removal of damaged parts of buildings, by manual mean etc, all completes.
75
35754
476.72
Excavation in soil in hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 50 metres.
3.38
1253
370.87
Excavation work by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains exceeding 30cm depth, 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
14.23
13939
979.56
Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete.
7.08
9374
1324.02
Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse sand, 4 graded stone aggregate of 40mm & down size)
3.23
21874
6772.36
Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge.
1.15
10279
8938.5
Filling inside plinth in building works with 23cm layers, consolidated to 15cm including watering, ramming etc, all complete.
15.14
4637
306.32
Providing and Laying damp proof coarse 40 mm thick with cement concrete 1:2:4 ( 1 cement, 2 Clean coarse sand, 4 graded stone aggregate 12.5 mm & nominal size) as per the direction of Engineer in Charge.
25.08
47824
1906.88
Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements. 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge)
16.91
137855
8152.32
Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
21.98
210575
9580.34
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - foundation CR trench
8.9
8754
983.62
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - column
63.58
87096
1369.87
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - slab
7.56
8127
1075.09
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) - lintel and beam
92.87
89533
964.07
Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete.
243.25
311681
1281.32
Providing and Laying 40 mm thick 1:2:4 c.c. (1cement, 2coarse sand,4 of 12.5mm and down stone aggregate) flooring with floating coat of neat cement to give a smooth surface in not exceeding 02 sqm. including cost of glass strips and curing etc complete in all building floors wherever specified.
284.6
146301
514.06
Providing and Laying 12mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete.
969.31
231033
238.35
Providing, fitting and fixing of dressed local timber (tooni, katus equivalent) in all types of frames complete.
1.5
166750
111167.03
Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete.
11.75
53897
4586.99
P/F/F in position of fully glazed shutters in windows and doors of champ wood or equivalent including steel butt hinges, screws, 3mm glass panes of modi guard or equivalent etc complete.
1.11
4623
4165.32
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately)
13.5
122837
9099.06
Providing and Laying plain colored glazed ceramic tiles of size 300mm x 300mm in plain colours (white, grey, ivory platinum, leather brown etc or equivalent), on floors landing etc laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
18.35
33002
1798.49
Providing and Laying white or colored glazed tiles anti skid ( elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry.
6.08
11788
1938.87
Providing, fitting, fixing of 24 BWG GCI sheet roofing with lapping of 150mm (two corrugation) with G.I. hooks, bolts and nut 8mm dia with bitumen, GI limpet washers filled with white bad including coat of approved steel primer and two coats of approved paint, on overlapping of sheet excluding carriage all complete.
289.61
308173
1064.1
Providing fitting fixing ridges or hips of 60cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8mm dia Limpets, Bitumen washers complete.
32.79
24840
757.56
Providing, fitting and fixing 23cm deep 24BWG Pre-painted HULAS. sheet eaves board including (50mmx25mm) dressed sal timber beading and M.S. Rod brackets all complete.
70.06
45362
647.48
Supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer - in- Charge all complete.
6068.04
615506
101.43
PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification.
91.86
251050
2732.97
Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete.
11.75
1398
119
Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
1040.93
143336
137.7
Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc and sand papering and filling the scratches complete on New surface.
445.88
70685
158.53
Providing U shaped drain of 23cm (ht) x 23 cm (width) of internal dimension with 1:2:4 Plum concrete (40mm & down) side wall thickness of 23 cm on both side with 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including 1:3 cement plaster with neat cement polishing & rounding of junction, as per the direction of the Engineer in Charge.
11.8
14284
1210.56
Cost of Haulage Excluding Loading and Unloading.Non stock materials. SAND - SURFACE ROAD
3831.24
91321
23.84
Cost of Haulage Excluding Loading and Unloading.Non stock materials. SAND - LOADING & UNLOADING
38.31
12528
327.03
Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE - SURFACE ROAD
448.85
10698
23.84
Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE - LOADING & UNLOADING
9.23
3018
327.03
Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE CHIPS - SURFACE ROAD
2384.01
56825
23.84
Cost of Haulage Excluding Loading and Unloading.Non stock materials. STONE CHIPS - LOADING & UNLOADING
21.67
7086
327.03
Cost of Haulage Excluding Loading and Unloading. stock materials. CEMENT - SURFACE ROAD
1083.59
25828
23.84
Cost of Haulage Excluding Loading and Unloading.stock materials. CEMENT - LOADING & UNLOADING
21.67
7086
327.03
Cost of Haulage Excluding Loading and Unloading. stock materials. TOR STEEL - SURFACE ROAD
434.71
10361
23.84
Cost of Haulage Excluding Loading and Unloading.stock materials. TOR STEEL - LOADING & UNLOADING
8.69
20713
2383.6
Protective Wall - Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.
28
13348
476.72
Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
291.82
102777
352.2
Providing and Laying Plum concrete in 1:2:4 c.c. (1cement, 2coarse sand, 4clean hard graded stone chips of 20 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. .
271.83
1377876
5068.89
Loading and unloading of stock and non stock material. CEMENT
43.49
11841
272.29
Loading and unloading of stock and non stock material. SAND
93.71
11911
127.11
Cost of haulage of stock and non-stock material. CEMENT (Within 15 km)
652.39
5308
8.14
Cost of haulage of stock and non-stock material. STONE (Within 23 km)
4006.77
32604
8.14
Cost of haulage of stock and non-stock material. SAND (Within 50 km)
97.49
793
8.14
Headload of stock materials for a distance beyond 30 m and within 100m distance.
434.93
5727
13.17
Headload of non-stock materials for a distance beyond 30m and within 100m distance.
93.71
29201
311.61
Provision for internal & external water supply & sanitation
1
609998
609998.99
Provision for Furniture & Furnishing
1
307547
307547.57
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements