West Central Railway Tender

Supply and fixing of PPR drain pipe (1" in main line & 1⁄2" in branch line) concealed in wall complete with all accessories like T, Elbow, Socket etc.

Supply & Installation of copper tube line 5/8"+1⁄4" copper tube with 2.5 sq.mm TRS cable & insulation for 2.0 Ton Split AC.

Supply of material & wiring of sub main phase and neutral in PVC casing caping 25 06 mm. with 6 mm2 single core multistrand copper cable and 2.5 sq.mm PVC insulated copper stranded green colour wire for earthing alongwith wiring and connections Note- (i) Separate PVC casing caping to be provided for this item. (ii) All material needed for this item are to be supplied by the contractor.

Supply and fixing of Digital Auto Time Switch DIN Mounted Contact Type: 1 C / 0, Contact Rating (Resistive Load): 16 Amp. @ 250 V AC.

Supply and fixing of 2 Pole Contactor, Rated current Ie AC3 upto 415 V: 25 Amps., Coil Voltage : 230 V AC, without any Auxiliary contacts.

Supply of 5.0 KVA Automatic line voltage stabilizer as per detailed technical specifications attached. 10

Supply and fixing of 'L' type wall mounted stand for outdoor split AC units.

Supply and fixing of metallic powder coated box double door size 10"x10" and thickness 2 mm.

Laying, testing & commissioning of circular armoured L.T. XLPE cable. stranded aluminum conductor 1100 volt with connection etc. Note: Cable will be supplied by Railway.

Digging of trench in pucca trench in yard/ platform 50 cm. deep and 35 cm. wide 13 including re-plaster on surface by cement concrete after laying of cable. Wherever the digging of trench to full size is not possible, measurement will be proportionate to the actual volume of cross section and length of the trench.

Digging of trench in all type of soils/ road cutting 100 cm. deep and 50 cm. wide. B 14 class bricks on both sides and top of the cable are to be provided. Brick length to be kept across the length of the cable including refilling the trench after laying of cable. Payment for trench will be made on flat rate basis, if it is dug more or less by 1 meter, payment will be made proportionately.

Supply of material & providing GI. pipe earthing arrangement by digging the pit as per 15 DRM/KTT's Drg. No. 01913EL/R1 or latest complete in all type of soils including rocky area. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor.

Supply & fixing of MCB distribution board double door Wall mounted having MCCB 100 Amp TPN on incoming & 12 Nos MCB SP 06-32 Amp braking capacity 10 KA, on outgoing connected through busbar & equally distributed on 3- phase complete with connection.

Laying and commissioning of Stranded compacted circular aluminium conductor A2XFY conductor screened with extruded , semi conducting compound XLPE HT cable Note- Cable will be supplied by railway.

Supply and fixing of 11 kV cable end box outdoor type heat shrinkable type for 11kV XLPE 3 core 50-95 sqmm size and connection with crimped lugs on cable end box.

Supply, erection, testing & commissioning of GO switch 11KV 400Amp 3pole with 9 Nos insulators operating handle along with locking arrangement system vertical type.

Supply, erection, testing & commissioning of DO switch fuse 11KV 400Amp pole operated outdoor vertical mounting expulsion type having MS base post type insulator and fiber glass fuse carrier.

Supply, erection, testing & commissioning of 11KV gapless metal oxide lighting arrester complete with hardware, fixtures, hot dipped galvanised pin, nut, bolts, washers etc to relevant ISS.

Supply & fixing of Rail Pole of 07 /09 mtrs or 9 mtrs long steel joist pole size 175 mm X 85 mm approx weight 19.1 Kg/m.

Providing, fabrication & erection of MS angle/channel size 100x50x6mm complete with 23 fixing by MS clamps size 50x6mm fixtures and hot dipped galvanized GI bolts, nuts, washers of 16mm dia confirming to relevant ISS. MS channels, clamps, fixtures are to be painted with two coats of red oxide primer and then two coats of aluminum paint.

Supply of material and Providing of copper plate Earthing arrangement by digging the Pit. Copper Plate size 600 X 600 X 3 mm as per drg.No. DRM/KOTA/01927/ELR.

Supply & fixing of Recess mounting fitting LED Panel 36 Watt in 2' X 2' size. Optics diffuse for 230 volt, 50 HZ Cutout Size 595 X 595 X 11.5 mm.

Installation, testing and commissioning of floor mounted distribution panel as per detailed technical specifications attached. INCOMING SUPPLY (a) 01 no. MCCB 4-pole 400 Amp. , 26 Breaking capacity 50 KA with thermal magnetic base release, auxiliary and alarm contact, spreaders with extended rotary handle. (b) 03 nos. phase indicator lamps LED type. (c) 01 No. Voltmeter 0- 500Volt, size 96X96 mm. (d) 01 No. selector switch. (e) 01 No. Ammeter AC 0-400Amp. With suitable size of CT 96X96 mm Shaped. (f) 01 No. manual on load change over switch 400 Amp, 4-pole OUTGOING CIRCUIT (a) 02 No. MCCB, 200 Amp. 4-pole , Breaking capacity 50 KA (b) 03 Nos. HRC fuses, 200 Amps. With base on each outgoing feeders. (c) 06 No. MCCB, 100 Amp. 4-pole, Breaking capacity 50 KA (d) 03 Nos. HRC fuses, 100 Amps. With base on each outgoing feeders

Supply, laying , fixing of heavy duty ISI marked B class GI pipe of 3.65 mm wall thickness & 50 mm diameter to be laid along the wall or floor with proper galvanized clamp through the wall or underneath the floor in cement concrete.

Supply of material, fabrication, fixing, connecting, testing and commissioning of heavy duty ISI marked B class GI pipe of 80 mm diameter with suitable clamps on rail/pole/joists with nut/bolts and GI socket as per site requirement. 29

Supply & Erection of material for fabricated steel work other than mast with SPS.

Supply, fabrication, installation, testing & commissioning of LT Junction box of four copper bus bar having rating 240 Amps for outdoor usage with foundation as details attached.

Supply, Installation, fabrication, testing & commissioning of LT Distribution panel Enclosure 16 Gauge fabricated with MS angle Size 1575X1200X400 mm (HXWXD) approx. with door and locking arrangement duly painted red oxide and power coated enamel paint consisting of following items - INCOMING CIRCUIT- 01 No. MCCB 4 pole 160 Amp. 25 KA TM Release, Type : DN1- 31 250C, 415V AC, 50 HZ. Ampere meter with selector switch -01 no., voltmeter with selector switch -01 no., indication lamp RYB 03 nos., Change over Onload Manual 160 Amp. 04 Pole 01 no. with indicator 02 no., CT 150/5A 15VA- 03 nos., Copper busbar Main 200 Amp. Rating- 01 set & Earth 200 Amp. - 01 Set, MCB 6A SP C 10KA - 04 nos. OUTGOING CIRCUIT- TM Release 04 no. MCCB 4 pole 63 Amp. 25 KA.. All MCCB in incoming and outgoing circuit will provided with Extended Rotary Handle and Spreader Terminals - 4 Pole (Set of 8) etc. as per attached detailed specification.

Supply, fabrication, installation, testing & commissioning of LT distribution board fabricated with MS angle Size 40X40X5 mm with door and locking arrangement duly painted red oxide and power coated enamel paint consisting of following items - IN COMING - MCCB TPN 4P 250 Amp. Breaking capacity 35 KA - 01 NO. , Ampere meter with selector switch 0-300 Amp.-01 no., 32 voltmeter with selector switch 0-500 volt -01 NO., indication lamp RYB 03 nos., fuse for indication 05 nos., CT 300/5- 03 nos., busbar 400 Amp. rating- 01 set & busbar insulator-1 set, Changeover 4P 400 Amp. - 01. OUT GOING - MCCB 200 Amp. 4P breaking capacity 25 KA- 02 nos. and MCCB 100 Amp. 4P breaking capacity 25 KA- 02 nos. Complete in all respect. All MCCB in incoming and outgoing circuit will provided with Extended Rotary Handle and Spreader Terminals etc. as per attached detailed specification.