West Central Railway Tender

Drilling of Horizontal bore below track/road by pushing method for laying of HDPE/DWC pipe of various size.

Supply of material, providing, commissioning and laying of DWC/HDPE pipe of 160/138 mm dia cabling under road/track.

Digging of trench in pucca trench in yard/ platform 50 cm. deep and 35 cm. wide 06 including re-plaster on surface by cement concrete after laying of cable. Wherever the digging of trench to full size is not possible, measurement will be proportionate to the actual volume of cross section and length of the trench.

Digging of trench in all type of soils/ road cutting 100 cm. deep and 50 cm. wide. B class bricks on both sides and top of the cable are to be provided. Brick length to be kept across the length of the cable including refilling the trench after laying of cable. Payment for trench will be made on flat rate basis, if it is dug more or less by 1 meter, payment will be made proportionately.

Supply of material, providing and laying of RCC hume pipe 6" dia (150mm) as per 08 latest IS in existing trench under Railway track including jointing and all required accessories etc. NOTE :- Before starting laying of RCC Hume pipe, the contractor shall obtain permission from Railway Authority and shall observe all safety precautions while working near Railway track. They should not cause any obstacle in train movement on track.

Digging of the trench and refilling after laying of pipe under track at the depth of 1 meter from the formation level etc.

Supply, laying, fixing of heavy duty ISI marked B class GI pipe of 3.65 mm wall thickness & 50 mm diameter to be laid along the wall or floor with proper galvanized clamp through the wall or underneath the floor in cement concrete.

Supply of material, fabrication, fixing , connecting , testing and commissioning of heavy duty ISI marked B class GI pipe of 80 mm diameter with suitable clamps on rail/pole/joists with nut/bolts and GI socket as per site requirement.

Supply of material & providing GI. pipe earthing arrangement by digging the pit as per 12 DRM/KTT's Drg. No. 01913EL/R1 or latest complete in all type of soils including rocky area. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor.

Supply of material & Erection of Maintenance Free Earth Electrodes station as per 13 RDSO Specification No. RDSO/Spn./197/2008 or latest as per attached detailed specification. Earth value will be taken by the contractor in the presence of Railway representative and written on the earth pit by the contractor.

Supply, Installation, fabrication, testing & commissioning of LT Distribution panel Outdoor Type Enclosure 14/16 SWG CRCA Sheet wall mounting / self-standing type fabricated double door and locking arrangement , dust & vermin proof, suitable space for control & power armoured cable, cable entry Incoming & outgoing at top/bottom side, with following items: INCOMING CIRCUIT- MCCB 4 pole 100 Amp. 25 KA with Adj. O/L 80-100%, Adj. S/C 5-10In(Ics=100%Icu) - 01 no., Spreader Terminals - 02 nos., Extended Rotary Handle - 01 no., Ampere meter with selector switch -01 no., voltmeter with selector switch -01 no., indication lamp RYB 03 nos., CT 100/5A CL1.0 5VA- 01 no., Fuse Terminal - 03 nos., Neutral Link - 01 no. OUTGOING CIRCUIT- MCCB 4 pole 63 Amp. 25 KA with 14 Adj. O/L 80-100%, Adj. S/C 5-10In(Ics=100%Icu) - 02 no., Spreader Terminals - 04 nos., MCCB 4 pole 32 Amp. 25 KA with Adj. O/L 80-100%, (Ics=100%Icu) - 02 no., Spreader Terminals - 04 nos., MCCB Canopy - 04 nos., MCB 4 pole 16 Amp. 10 KA - 01 no., DIN Type HRC Fuse 160 A Size 00 with Breaking capacity 80 KA conforms IS 13703-part 2, IEC 60269-part-2 - 16 nos., DIN Type Fuse 63 A Size 00 with Breaking capacity 80 KA conforms IS 13703-part 2, IEC 60269-part-2 (ISI mark) - 08 nos., DIN Type Fuse 32 A Size 00 with Breaking capacity 80 KA conforms IS 13703-part 2, IEC 60269-part-2 (ISI mark) - 08 nos.. COMMON MATERIAL- 2.5 mm Sq. s/c wire - 1 Lot., 1.5 mm sq. s/c wire - 1 Lot., Copper Busbar - 50X5 mm - 1 lot., 16 mm Sq. CU Flexible Wire - 1 lot., Insulators - Hardware - Busbar Sleeve etc. - 1 Lot., Miscellaneous Items - 1.5 to 2.5 mm sq. single core wire, legend plate, cu. luges, Holo luges, Cable tie, MCB / PVC channel, hardware, gaskit etc. - 1 Lot.. as per attached detailed specification.

Design, Survey, Proposal with Technical Elevation Drawings & 3D layout, Manufacture, Display, Erection, Installation and testing of wall / hanging / floor / pole mounting type LED illuminated, Modular, Changeable Aluminium extruded profile signage / direction board in full/half Parabolic and Elliptical square and multi angle shape, with die molded internal structural brackets (Nylon/SS) and aluminium extruded heat sink. Suitable size end cap PC/SS304 should be provided with provision of illuminated Logo. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter vision angle shall not be less than 160 degree and visibility not be less than 75%. The approved color text and graphics shall be printed / router cut on monomeric calendared vinyl of 70 um thickness and shall be firmly pasted on display sheets. A pole with grooves for tricolor LED/Neon light installation. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light as per Detailed Specification in attached document.

Supply & fixing of Recess mounting fitting LED Panel 36 Watt in 2' x 2' size. Optics diffuse for 230 Volt, 50 hz cut out size 595 x 595 mm.

Supply of material and wiring, testing and commissioning of light/fan point in PVC rigid 17 conduit pipe size 19/20 mm medium class with 1.5 sqmm multistrand PVC insulated copper conductor cable confirming to IS: 694-1990 or latest amd 2.5 sqmm PVC insulated copper wire coloured for earthing alongwith connections etc.

Supply of material and wiring, testing and commissioning of sub main phase and 18 neutral in PVC rigid conduit pipe size 25 mm dia. Medium class mark with 4 sq.mm. PVC insulated single core multistransd copper cable with 2.5 sq.mm. PVC insulated copper wire green coloured for earthing and connection etc. Separate PVC pipe to be provided for this item.

Supply of materials and fixing of main distribution box 4+2 way suitable for housing MCB and ELCB with neutral link. Distribution box should be fixed on wooden taper plug or steel 19 fasteners etc. with supply and fixing of 01 no. MCB SPN 16 Amp. breaking capacity 10 KA and 02 Nos. MCB SP 6-32 Amp. breaking capacity 10 KA with 01 No. ELCB 25 Amp. DP, sensitivity 30 m.Amp. and connections etc. The distribution board is to be fixed on wall with the help of rag bolt /fastener or on board and connecting the same with suitable size of wire duly crimped lugs.

Supply, Installation, testing and commissioning of IP Dome Camera 2 Megapixels 20 (HIKVISION/CP PLUS /Similar) 1/2.8" progressive scan CMOS up to 2 Megapixels resolution Full HD1080p real-time video 120dB Wide Dynamic range 3D DNR EXIR high performance LEDs 12V DC +- 25% & PoE (802.3af Class 3) Support H. 264+ IP67 for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of IP Bullet Camera 2 Megapixels 21 (HIKVISION/CP PLUS /Similar) 1/2.8" progressive scan CMOS up to 2Megapixels resolution Full HD1080p real-time video 120dB Wide Dynamic range 3D DNR EXIR high performance LEDs 20 mtr IR range 12V DC +- 25% & PoE (802.3af Class 3) Support H. 264+ IP66 for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of NVR 8 Ch (HIKVISION/CP PLUS 22 /Similar) 1 SATA Third party network cameras supported up to 8 Megapixels resolution recording support 1-ch HDMI, 1-ch VGA, HDMI at up to 4K(3840x2160) resolution. support H.265/H.264/MPEG4 video formats for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of HDD 2 TB Toshiba/Seagate 23 Surveillance 3.5" SATA Hard Drive 7200/5400rpm 256/128 MB buffer 24/7 operation Supports up to 64 video camera high reliability and enhanced real- time performance for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of 8 port Gigabyte switch (D- LinkTenda/Iball/Similar) 100Mbps : 148800pps, 1000Mbps : 1488000pps for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of wifi Router 4 port Tenda/Tp Link /Similar for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of Power Supply 8 Ch ERD/RTX/Similar 10 Amp. 12v DC for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of Wire copper for power two pair of camera 500 mtr . Length 90mtr., Voltage 220v., Inner Material - copper., Conductor material PVC for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of Wire cat-6 copper (HIKVISION/Digisol/Similar) 500mtr Solid - Bare Copper , Thickness :- 0.55+-0.05mm, Material - PVC (complies RoHS), CM for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of Electricity board 3 board, 2 socket 6Amp. / 4 socket 6Amp for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of 4u rack for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of LED 32 Inch (MI/LLOYD/SHARP/Similar Display, 32-Inch Display, Ideal viewing distance of 4-6 ft. 733 x 435 x 80 mm Product Dimension 3.9kg. Weight. for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of PVC Pipe for conduit with accessories band flexible pipe etc. for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of 1000 VA UPS FOXIN/PIXELS/Similar for IP Based Camera for surveillance/security System.

Supply, Installation, testing and commissioning of Installation Charges for Complete project for IP Based Camera for surveillance/security System.

Supply, Installation Testing and Commissioning of Intelligent Field Device (IFD) having inbuilt energy metering, Analog Inputs, Analog Outputs, Digital Inputs, Digital Outputs, GPRS communication/ethernet, LAN, WiFi, etc., display along with filter power circuit having fuses, AC to DC 35 power supply providing adequate DC Supply options (Viz. 5V/12V/24V etc.) with battery back for monitoring and control of Pumps, 30-70% Lighting, Street Light(s), Escalator(s), Escalator(s), Substation, etc. capable of monitoring & control electrical parameters, sensors parameters with necessary control capability through internet cloud computing along with integration with CRIS software & technical support as per specifications (for Item no. 38 to 48)

Supply, installation testing & commissioning of cable tray hot dip galvanized 3 meter length, 105x400mm. 37

Supply, installation testing & commissioning of cable tray item EDRNDC- FAST SPLICE

Supply, installation testing & commissioning of cable tray item CONSOLE 41X41 S 400 GC

Supply, installation testing & commissioning of cable tray item BAG OF 100 BOLTS TRCC 6X20 DC

Supply, installation testing & commissioning of cable tray item CE25DC-SQ SPLICE WASHER

Supply, installation testing & commissioning of cable tray item Kitasstr - to create bend. (50/bag) 42

Cable tray cutter - COUPFIL - Bolt cutter

Laying, testing and commissioning of Stranded compacted circular aluminium conductor A2XFY conductor screened with extruded, semi conducting compound XLPE insulated screened with extruded semi conducting compound in combination with copper tape (0.3 kA to 1 sec) core laid up inner sheath (ST-2) PVC galvanized steel strip armoured and overall PVC sheathed black cable HT cable size 3 core x 70 sq. mm suitable for 11 kV(E) 6.6 kV (UE) confirming to IS 7098(Part-II) 1985 /with latest amendments.

Supply and fixing of 11 kV cable end box outdoor type heat shrinkable type for 11kV XLPE 3 core 50-95 sq. mm size and connection with crimped lugs on cable end box.

Supply, erection, testing & commissioning of GO switch 11KV 400Amp 3pole with 9 Nos insulators operating handle along with locking arrangement system hot deep galvanized vertical type .

Supply, erection, testing & commissioning of DO switch fuse 11KV 400Amp pole operated outdoor vertical mounting expulsion type having hot deep galvanized base post type insulator and fiber glass fuse carrier.

Supply, erection, testing & commissioning of 11KV gapless metal oxide lighting arrester complete with hardware, fixtures, hot dipped galvanized pin, nut, bolts, washers etc. to relevant ISS.

Supply of material and Providing of copper plate Earthing arrangement by digging the Pit. Copper Plate size 600 X 600 X 3 mm as per drg. No. DRM/KOTA/01927/ELR. 49

Supply & Erection of material for fabricated steel work other than mast with SPS.

Supply & fixing of 9 mtrs long steel joist pole size 175 mm X 85 mm approx. weight 19.1 Kg/m .

206871.70 Comprehensive Annual Maintenance Contract (CAMC) by OEM / Authorized Dealer for First Year as per specification attached and RDSO specification no. RDSO/PE/SPEC/TL /0095(Rev-'3')-2019 or latest

Comprehensive Annual Maintenance Contract (CAMC) by OEM / Authorized Dealer for Second Year as per specification attached and RDSO specification no. RDSO/PE/SPEC/TL /0095(Rev- '3')-2019 or latest

Comprehensive Annual Maintenance Contract (CAMC) by OEM / Authorized Dealer for Third Year as per specification attached and RDSO specification no. RDSO/PE/SPEC/TL /0095(Rev-'3')- 2019 or latest

Comprehensive Annual Maintenance Contract (CAMC) by OEM / Authorized Dealer for Fourth Year as per specification attached and RDSO specification no. RDSO/PE/SPEC/TL /0095- 2019(Rev-3) or latest

Comprehensive Annual Maintenance Contract (CAMC) by OEM / Authorized Dealer for Fifth Year as per specification attached and RDSO specification no. RDSO/PE/SPEC/TL /0095(Rev-'3')- 2019 or latest

CPWD DSR-2021 Civil Engg. items as NS items

Civil Engg. NS Items