Watershed Development And Soil Conservation Department Tender

सीमेंट ककंक्रीट 1 सीमेंट : 4 बजरी तथा 8 गिट्टी / 1 सीमेंट, 3 बजरी तथा 6 गिट्टी पत्थर की 20 मिमी नामीय माप की नींव में डालना , कूटना तथा तराई आदि सहित एनीकट के लिए। इका ई : घन मीटर xzkeh.k dk;Z funsZf'kdk 2024 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-la- #170(v) 1:4:8 इकाई : घन मीटर

सीमेंट ककंक्रीट 1 सीमेंट : 4 बजरी तथा 8 गिट्टी / 1 सीमेंट, 3 बजरी तथा 6 गिट्टी पत्थर की 20 मिमी नामीय माप की नींव में डालना , कूटना तथा तराई आदि सहित एनीकट के लिए। इका ई : घन मीटर xzkeh.k dk;Z funsZf'kdk 2023 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-la- #170(ब) 1:3:6 इकाई : घन मीटर

सीमेंट कंक्रीट 1:2:4 /1:1.5:3 मिश्रण की प्रवलित सीमेंट कंक्रीट में डालना तथा आपूर्ति करना, छत की स्‍लैब, छज्‍जे, बीम, लिंटल आदि में दबाना, तराई करना तथा सतह को 1:3 सीमेंट मसाले से समतल करना आदि समेत पाडबन्दी सहित परन्‍तु स्‍टील तथा शटरिंग की कीमत अलग से।  xzkeh.k dk;Z funsZf'kdk 2023 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-la- #13(अ) अनुपात 1:2:4 इका ई : घन मीटर   

सेन्‍टरिंग'शटरिंग (तख्ता एवम ढुलाबंदी) का आर.सी.सी. छत, स्‍लेब, छज्‍जे, लिन्‍टल आदि डालने के लिए लगाना 4.5 मीटर ऊचाई तक के लिए तथा हटाना आदि विशेष विवरण के अनुसार। xzkeh.k dk;Z funsZf'kdk 2023 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-l #93(ब) शटरिंग स्टील    इकाई : वर्ग मीटर        

आर.सी.सी. काम के लिए लोहे को काटना , मोड़ना तथा स्थान पर लगाना तथा बां बांधने ने का कार्य मय आपूर्ति के । इकाई : किलोग्राम xzkeh.k dk;Z funsZf'kdk 2023 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-l 61

15 से 30 सेमी मोटे हथोड़े से तरासे हुए एकल पत्‍थर की पिचिंग समस्‍त उठान के साथ, आपूर्ति के साथ इकाई : घन मीटर xzkeh.k dk;Z funsZf'kdk 2023 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-l 167

जेसीबी . मशीन/ट्रेक्टर मय स्क्रेपर द्वारा मिटटी खुदाई कार्य , खोदी हुई मिटटी के डगलों को तोडने (Breaking of clods), घास एवं कंकर, पत्थर को अलग करना (Sorting of grass & pebbles) एवं बण्ड (Bund) का सेक्शन (काट क्षेत्रफल में)/प्रोफाइल संधारित करना मय चढाना एवं वं उतारना प्रांरंभिक लीड 250 मी . एवं लिफ्ट 3मी . तक। Draft based on chapter 5th of irrigation page number 32 to 34 (दिनाँक 01/02/2017 से से मान्य ) ईकाई 1 घन मी . इकाई : घन मीटर xzkeh.k dk;Z funsZf'kdk 2024 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-l #196(ब) मशीनरी कार्य सख्त मिट्टी (in Hard Soil) इकाई : घन मीटर

Compaction of earth or highly weathered strata By manually or plain roller. (density 90% of Proctor)

Watering of earth including cost of carriage of water when source of water is up to 1 KM.

सीमेन्ट प्लस्टर दीवार पर 1:4 अनुपात में सीमेन्ट - बजरी मिलाकर जोडों को कुरेदने तथा 14 दिन तक नियमित तराई सहित इकाई : वर्गमीटर  xzkeh.k dk;Z funsZf'kdk 2024 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-la- 76c   

क्वेवेरी रविस जिसमें में 40 प्रतिशत पत्थर के स्पाल हो या कंकर या घाड़ला को बिछाना तथा आपूर्ति करना , पानी छिड़कना तथा दुरमुमुट से कूटना । इकाई : घन मीटर xzkeh.k dk;Z funsZf'kdk 2024 dh CykWd Lrjh; nj vuqlwph iapk;r lfefr NhikcM+kSn ds dz-l 124

uhao] [kkbZ] ijukyk esa 1-5 xgjkbZ rd feêh dh [kqnkbZ djuk] ry dks dwVuk] ikuh Mkyuk] cxy dks laokjuk] [kqnh feêh dks ckgj fudkyuk] uhao Hkjus ds ckn [kkyh LFkkuksa dks iqu% feêh ls Hkjuk rFkk cph gqbZ feêh dks 50 ehVj dh nwjh rd fuLrkj.k djukA Item No.#2(ब) G.K.N. BSR 2024 Block Chhipabarod

lhesUV dkaØhV uhao ;k Q'kZ esa 40 fe- eh- ukeh; eki dh iRFkj fxÍh@bZV fxÍh] lhesUV & jsr elkyk esa 1 lhesUV % 4 jsr % 8 fxÍh vuqikr eas feykdj Mkyuk rFkk dqVkbZ djuk] rjkbZ lesrA Item No.#15(अ) G.K.N. BSR 2024 Block Chhipabarod

  फर्श के नीचे सूखा खरंजा हेतु 15 से सेमी उंचे पत्थरोंरों की आपूर्ति एवं वं खरंजा लगा का पूर्ण कार्य Item No.#65 G.K.N. BSR 2024 Block Chhipabarod   

सीमेंट कंक्रीट 1 सीमेंट : 2 बजरी : 4 पत्थर एग्रीगेट अनुपात में 12 मिमी नामीय माप की एग्रीगेट के के साथ डालना ,कूटना तथा तराई आदि सहित । Item No.#16 G.K.N. BSR 2024 Block Chhipabarod

SEATED PULLER Providing and fixing of Seated Puller of size not less than l900mm (Length) x 740mm. (width) x 1920mm. (Height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio- pulmonary function. The main structure frame shall be made from G.I. pipe minimum of 60NB "C" class welded with MS. round base plate at least 250 mm & 10mm thick. The handle frame shall be minimum of 32NB “C” class G.I. pipe. The seat frame minimum of 32NB "C" class G.I. pipe, Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The wder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fulfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 4. (The cement concrete and excavation work shaI1 be paid separately).

LEG PRESS Providing and fixing of Leg Press of size not less than l840mm (Length) x 360mm (Width) x 1560mm. (Height), to build up the muscles of thigh and enhance the strength of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least Ø250 mm & l0mm thick. The Sleeve frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main frame. The footrests shall be made from casted Aluminum material, having sizes minimum of l30mm X 310mm X 5mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nut bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with 60 to 70-micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in- charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 5. (The cement concrete and excavation work shall be paid separately).

SIT UP BOARD DOUBLE Providing and fixing of Sit up Board double of size not less than l760mm (Length) x 1 l40mm (Width) x 660mm (Height), to enhance the flexibility of whole body. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate at least 0250 mm & 10mm thick. The remaining frame of the sit up board minimum of 32mm NB shall be made from "C” class Gl pipe. The powder coating shall be done with Pure Polyester powder Ackzonoble/ Berger/ Nerolac Paints with 60 to 70-micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed Photo No. 6. (The cement concrete and excavation work shall be paid separately).

CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 7l0mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main structure frame shall be made from G.l. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 250 mm & 10mm thick. The horrific frame shall lie made up from at least 32NB "C" class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made M.S. Sheet of size nut less than 330mm X 300 mm X2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shell be done with Pure Polyester powders front Ackzonoble/ Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in al I respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 7. (The cement concrete and excavation work shall be paid separately).

DOUBLE STANDING TWISTER Providing and fixing of Double Twister Standing of size not less than I500mm (Length) x 600mm (Width) x l300mm. (Height), to enhance flexibility of waist. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame is minimum of 25NB shall be made from "C" class G.L. pipe. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 0300mm and 10mm thick. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement, The indicative Design/Photo is as per enclosed Photo no. 9. (The cement concrete and excavation work shall be paid separately)

CHEST CUM SHOULDER PRESS Providing and fixing of Seating & Standing Twister of size not less than l700mm (Length) x 540mm (Width) x 1250mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB "C" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The bottom frame of the Seating & Standing twister be atleast of 32 NB, 50 NB, and 25 NB shall be made from "C" class G.I. pipe. The handle frame of Seating & Standing Twister of minimum 25 NB & Foot resting frame of seating side shall be made from "C" class G.l. pipe minimum of 25mm NB. The Twister plate to be fitted on the bottom frame shall be made up of M.S. Round Plate of minimum size 300mm diameter and 10mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shal I be done by Pure Polyester powder of Ackzonoble/ Berger/ Nerolac Paint with 60 to 70 micron thickness, complete in all respect including fixing The M.S. holdfast in cement concrete to hold the whole structure, under the directions of Engineer-in-charge to full fil the functional requirement. The indicative Design/Photo is as per enclosed Photo no. 10. (The cement concrete and excavation work shall be paid separate)

SEATER MRG Providing and fixing of For Seater MRG swing of size 4/5 Feet (Diameter), 3 Feet (Height) fabricated with a Center Pipe/ Frame of 50 NBshall be made from "C" Class G.I. pipe and FRP material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe. The handle frame of 25NB shall be made from "C" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB"C" class welded with M.S. round plate of Ø250. mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately)

CIRCULAR SWING FOUR SEATER Providing and fixing of CIRCULAR SWING FOUR SEATER of size 6.0 X 5.25 X 5.0 Feet fabricated with a Center Pipe/ Frame of 63 NB shall be made from "C" Class G1 Pipe and FRP material. The bottom shall be welded with support of MS round plate of Ø250 mm & 10mm thickness, the bottom frame of 32NB shall be made from "C" class G.I. pipe. The The bottom handle frame of 25NB shall be made from "C" class G.I. pipe. The foundation should be used for fixing is a structure and shall be made from pipe of G.I. of 65 NB "C" class welded with MS round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm MS angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3 mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in charge regarding material, shape of equipment, colour (of metal, seat and padal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid seperately)

FOUR SEATER SEE SAW Providing and fixing of FOUR SEATER SEE SAW of size 5.5 X 6.25 X 2.5 Feet fabricated with a Center Pipe/ Frame of 50 NBshall be made from "C" Class G.1. material. The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.I. pipe. The handle frame of 25NB shall be made from "C" class G.1. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 50 NB"C" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder conting shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc (The cement concrete and excavation work shall be paid separately

HORSE/ DUCK/ RABET SPRING RIDER Providing and fixing of HORSE SPRING RIDER of size 3.0 X 2.5 Feet fabricated with a Center Pipe/ Frame of 40 NB shall be made from "C Class G.1. material and FRP Material The bottom shall be welded with support of M.S. round plate of Ø250 mm & 10mm thickness. The bottom frame of 32NB shall be made from "C" class G.1. pipe. The handle frame of 25NB shall be made from "C" class G1. pipe. The foundation should be used for fixing is a structure and shall be made from center pipe of G.I. of 40 NB "C" class welded with M.S. round plate of Ø250 mm & 10mm thick. Main pipe shall be supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts and bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders from Ackzonoble or Berger Paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of Engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (The cement concrete and excavation work shall be paid separately)