Watershed Development And Soil Conservation Department Tender

Providing & Fixing of IK07 IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum LM6/ ADC12 material with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (UV stablzation report submitted for UV cover ) and secondary lens on each LED & should be SMD type . The System level Luminaire efficacy =120 lm/ wt with High Power LEDs is to be used and potted driver must be potted & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @=300 V AC and Auto resetting Safety ,Input Frequency 50Hz±3% Power Factor 0.95 driver Efficiency 85% ,THD(I) 10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current 1000mA shown in LM79 report. The luminaire shall be BIS certified and T.C. certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened ,color Rendering Index 70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced. .LED Street Light fixture 30 Watt

Providing & Fixing of Street light bracket made out from following size of 'B'class, Medium class G.I. Pipe confirming to IS:1239P-1(2004) with heavy duty pole clamp, Saddles suitable fastners etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/work,referAnnexure"A" attached with this BSR .20 mm Dia

Providing & Laying P.V.C./XLPE insulated &P.V.C. sheathed Un-armoured/ Armoured aluminium cable of 1.1KV grade as per PWD specification for electrical Works in existing RCC/Hume/Stoneware/PVCpipe/openduct/cable trench with filling of excavated earth in trench, on existing cable trays or on surface etc. including making necessary connection, testing etc. as required of size and as per points (a),(b),(c),mentioned below:- (a)Material:-H4-Grade aluminium conductor of purity 99.6 % & as per IS:1554 P-I / IS :7098 P - I (b)conductor shall have electrolytic aluminium confirming to IS 8130, IS 3975-1999 for armouring of cables in armoured cable items ,IS5831 for sheath ,IS10810 (Part 0 to 64 ) for testing procedures . (c) OEM Must have ISO9001&14001 certifications forquality assuarance & its own in house NABL lab setup for alltest ingfacilities forcables. Appropriatetypetest certificate/OEM test report shall be submitted. All above as per preapproved by Engineer in charge. For additional technical parameters of products/work, refer Annexure"A" attached with this BSR .Armoued Cable 6.0 Sqm 2 core