Water Resources Department Tender

Random rubble stone masonry(using R.R stones where 75% stones to be not less than 15 cm in size in any direction and weighing nt less than 23 kg.) for superstructure including curing with all leads of all construction materials including curing etc. complete.(c) In cement sand mortar 1:5

Plaster in cement sand mortar 1:3 including racking of joints, smooth finishing & curing etc. complete including all leads of all construction materials of thickness: 20mm

Centering and shuttering for slabs,beams,lintels Columns,trough with or without caps and base including propping and remove

Supplying of M.S. reinforcement including labour charges for bending binding and placing in position all reinforcement as per drawing including cost of binding wire and all leads and lifts using Tor or ribbed bars (IS: 1786-1985)

Providing and Laying in position 0f Cement concrete Nominal mix (1:1.5:3) including leads of all construction materials,curing,compaction and finishing with rendering in cement sand mortar 1:3 (1 cement:3 coarse sand) and making good the joints excluding the cost of centering,shuttering and reinforcement.Well graded crusher broken stone aggregate of maximum size upto 20 mm

Design,Drawing,fabrication,supply,erection,testing and commissioning of Vertical lift slide type gate with frame consisting of skin plate,sealing frame,stiffeners,horizontal and vertical girders,guide,stainless steel flat/Brass flat,rivets,wedges,lifting rods etc.,with all accessories as per relevant IS code including frame & gate complete set for Canal Cross Escape,head regulator/Tank head regulator including cost of all materials,machinery,labour cutting,aligning,welding,finishing,cleaning,seal fixing,tools and tackles etc.,applying two coat coat of zinc rich epoxy primer to give dry film thickness of 70+-5 microns and finish coat(two coats) of solvent less coal tar epoxy paint using airless spray to provide dry film thickness of 150+-5 microns per coat thus total dry film thickness of all coats,including primer coating,should not be less than 350 microns,complete as per specifications and approved drawings with all leads and lifts,including packing & forwarding,transportation charges for structural steel components and other materials.

Providing,Fabrication, machining with straightening work of Guide Tee,Track,Sealing frame,Leaf frame or any part of gate's, complete as per drawing with testing,including cost of all materials with machinery,labour,tools and tackles cutting ,aligning,welding,finishing,cleaning etc,apply one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint,etc,complete as per specifications and approved drawings with all lead and lifts,,including packing & forwarding,transportation charges for structural steel components and other materials.

Providing,Fabrication, machining and assembling of different types of MS Anchors/MS chuck nut for Gate assembly, complete as per drawing with testing,including cost of all materials, applying one coat of zinc rich epoxy primer and two coats of cold applied coal tar epoxy paint with machinery,labour, cutting,aligning, welding,finishing,cleaning etc,complete as per specifications and approved drawings with all lead and lifts,,including packing & forwarding,transportation charges for structural steel components and other materials. A. MS Chuck Nut

Providing and Laying in position 0f Cement concrete Nominal mix (1:2:4) including leads of all construction materials,curing,compaction and finishing with rendering in cement sand mortar 1:3 (1 cement:3 coarse sand) and making good the joints excluding the cost of centering,shuttering and reinforcement.Well graded crusher broken stone aggregate of maximum size upto 20 mm