Vardhman Mahaveer Open University Tender

Centering & Shuttering with plywood or steel sheets including strutting, propping, bracing bothways and removal of formwork for foundations in basements rafts, footings, strap beams bases of columns, etc. Upto plinth level.

Providing and laying in position specified grade of reinforced cement concrete including curing, compaction, finishing with rendering in cement sand mortar 1 : 3 (1 cement :3 coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement - All work up to plinth level : 1 : 1.5 : 3 (1 Cement : 15 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Random Rubble stone masonry for foundation and plinth in Cement Sand mortar above 30 cm thick wall in : Cement Mortar 1 : 6 (1- Cement : 6- Sand).

Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20cm. in depth, consolidating and watering including lead upto 50 Mtr. and lift upto 1.5 Mtr. using crusher sand in plinth including loading & unloading transportion etc. Complet.

Providing and fabricating reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo-mechanically Treated bars (Tata, SAIL) Qty. of R.C.C. asper Item no. 7 40 Kg/Cum for footings only

Plaster on new surface on walls in cement sand mortar 1 : 4 including racking of joints etc. Complete fine finish : 20 mm thick

Providing and fixing of required color coated Galvalume trapezoidal profile sheet of 0.45mm base material thickness of Hi - tensile steel with minimum 550 MPA yeild strength at all lead and lift upto pitch of 60 and as per detail technical specification and direction of engineer incharge. The total thickness i/c color coating shall be 0.5mm. (The mode of mearurement for payment shall be based on finished/covered net surface area). The quoted rates shall be the excluding the cost of purlins, rafters. and trusses etc.

Provinding and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide.

Add extra if square, rectangular hollow tubular sections are used.

Providing and fixing of precast concrete interlocking blocks of 80mm thick (M-30 Grade) manufactured from fully computerized automatic stationery hydraulic vibto perssed machine & full computerized automatic batching plant of class A-I as per BS: 6717-2001. The CC interlocking paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compected sub base as defined. The work includes earth work in cutting of B/T road, cutting of WBM road and disposal of unserviceable Material with all leads & lifts and stacking of serviceable Material complete job is to be executed as per the instructions of Engineer-in- charge. The rates to be inclusive of all lead, lifts & taxes General specification of Blocks:1. Shape : As specified by Engineer-in-charge. 2. Tensile splitting strength and breaking load as per BS : 6717-2001. 3. Colour : Grey cement natural colour and multi color 4. Variation in Dimension : Less than 1.6mm 5. Variation in thickness : Less than 3.2mm P & F –do--80mm thick (M-30 Grade) –do--

Painting with enamel paint of approved brand & manufacture to give an even shead. Two or more coats on new work.

Supplying and fixing of chain link fencing with angle iron posts 50 X 50 X 6 mm placed at every 3 Mtr. Apat 30 cm in ground embedded in cement concrete 1:3:6(30 X 30 X 45cm) corner and every tenth post to be strutted with (50 X 50 X6mm) angle iron provided and fixed and fitted with posts including earth work in excavation etc. complete with chain link Size 75 mm X 75 mm X 3.15 mm

Providing and laying in position cement concrete including curing, compaction etc. Complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1: 1.5 : 3 (1Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size).

Dry stone pitching including preparing the surface etc. complete. Random Rubble with stone weighing 30 to 40 kg. each.