Urban Improvement Trust Tender

Supplying and making end termination with heavy duty Copper lugs ( ANY type ) confirming to IS 8337 -1976 duly crimped with crimping tool, PVC tape etc of following size.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

6.0 Sq.mm

Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS: 1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Supply & Laying following size earth wire in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection with GI/Cu purity purity 95% thimble etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

10 SWG copper. Wire

Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

Single pole MCB (With B/C curve tripping Characteristics)

6 A to 32 A rating

Supplying , installation , Testing and commissioning of grid connected SPV power plant in accordance with latest MNRE approved specifications/ BIS standards with free comprehensive maintenance for 5 years as Per following details :

(a) SITC of MNRE specifications/Approved Polycrystalline standard lP-65 SPV modules of following capacity with minimum rating of each module 200 Wp with equal no. of module to be in each series circuit. PV module made out from min' 72 nos poly crystalline solar cells and frame made out from Anodized Allunimium alloy with hot dipped galvanized steel mounting structure, civil structure, lightning and over volage protection, earthing protection as per specification as required for making the solar system functional complete in all respect as required.

(b) SITC of lP-65 rating wall/floor mounted string inverter 3 phase, low maintenance, full sine wave, 50 Hz AC out put with grid tied features along with all protection, controlling arrangement and required accessories of following capacity.The inverter AC nominal power output rating must be equal or greater than the required KWp of the module at standard test condition(STC) and as per MNRE specification.The inverter unit shall be suitable for indoor and outdoor installations including all DC/Ac plugs and socket, D.B.'s and with all necessary electrical DC solar cables between modules and inverters and ac cables from inverter to AC panel (Any length as required) & lugs and terminations with solar metering and net Metering, conduits and cable trays and all other material and workmanship required to connect with main distribution panel as per the direction of engineer - in- charge.

10.0 KW Capacity