Urban Improvement Trust Tender

CABIN TABLE: Table of Size 1500Lx750Dx750H:- with Side Unit & Partition Panel. Table top made up of 25mm thick Prelaminated partcle board. All Edges are sealed with 2mm thick PVC edge-band from Rehau. Gable End. Modesty Panel:- Privacy panel in 18mm thick sleeker made up of PPB and hold with bracket. Panel available in 400-450mm Height for Below Table Configuration & 1650mm/Required Length. 54mm thick Panel Based Partition Panel Powder coated aluminium half height partition with necessary white board, fabric board and raceways of Approved Fabric shade and colour. Low Ht Side Storage of size 900Lx400Dx750H with Levellor, Low Ht Storage Consisting 2Nos Openable Door & Open Shelves Below The Table Top. Storage Carcase & Facia made up of 18mm thick Pre-laminated particle board. Back Panel from 9mm PPB. Storage with proper arrangement for Locking system and D type ss brush handle. Storage all required hardwares including locks etc are ebco of equivalent.Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

MODULAR WORKSTATIONS : Providing and fixing of 54mm thk Powder coated aluminium half height (4'ft Panel) Panel based partitions with necessary white board, fabric board and double raceways of Approved Fabric shade and colour. Make - Methodex/Customised. Work station : Size (1200 L x 1200 B x 600 D x 750 H) of the table top. 25mm thick table top made of Prelaminated particle board with 2 MM PVC edge binding. With Key board Tray plastic. Providing and fixing of Pedestal's under the Work Station made up of PLPB on three sides and shutters in 18mm PLPB edge banded and fixed type lock. Cost inclusive of all hardware and finish complete. The Pedestal have 3 Drawer. Size (400mm x 400mm x 730mm). Metallic with PVC base CPU trolly. Set of 4 Nos. Cubicals. Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA .

MEETING TABLE: Round Table of size - 1800 mm dia of 25mm lipped table top with 18mm Thk. PLPB Leg Support from four sides. Mica Shade to be choosen from action tesa catalogue. Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

REVOLVING CHAIR (VOGUE - HB) : Providing and Fixing of Revolving Chair seat/back Assembly is made up of 12 MM thick hot pressed plywood upholstered with Leatherette and Polyurethane Foam (HD FOAM). The back is made up 12 MM. thick hot pressed plywood upholstered with Leatherette and molded polyurethane foam (HD FOAM). The back ply and foam is designed to provide maximum lumber support for comfortable seating posture 2. POLYURETHANE FOAM: The polyurethane (High density) foam for seat and back is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2. ARMRESTS: Soft cushioning over chrome armrests. TORSION BAR MECHANISM : The mechanism is designed with the following features Single point control. Provides maximum adjustability and scope for comfort. Seat & Back moves in same direction in the ratio of 1:3 and thus affecting a 9 degrees opening up of body. 1 position locking with anti shock feature. PNEUMATIC HEIGHT ADJUSTMENT The pneumatic height adjustment for (I030300001 Model) has an adjustment of 100 MM. PEDESTAL ASSEMBLY: The pedestal is fabricated from Wooden and steel frame and assembled with injection moulded black polypropylene hub cap and 5 nos. twin wheel castors). The pedestal is 570 ±8 MM. Pitch-center dia. (680 ±10 MM with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in black Nylon. (Castor wheel dia. 5.0 cm). Make - Methodex/ Godrej / Herman Miller . Make - Methodex. Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

REVOLVING CHAIR (M HB) : Providing and Fixing of REVOLVING CHAIR of size : H 1120 x D 680 SEAT/BACK ASSEMBLY. The seat is made up of 12mm thick hot pressed plywood upholstered with Fabric and molded polyurethane foam. The back is made up 12mm. thick hot pressed plywood upholstered with Fabric and molded polyurethane foam. The back ply and foam is designed to provide maximum lumber support for comfortable seating posture 2. POLYURETHANE FOAM : The polyurethane (High Density) foam for seat is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2.9. ARMRESTS: PU Armrest Centre Tilt MECHANISM: The mechanism is designed with the following features: Front pivot for tilt with feet resting on ground ensuring more comfort. Provides maximum adjustability and scope for comfort.Seat & Back moves in same direction in the ratio of 1:3 and thus effecting a 9 degreesopening up of body PNEUMATIC HEIGHT ADJUSTMENT The pneumatic height adjustment for (I030050010 Model) has an adjustment of 100 MM. PEDESTAL ASSEMBLY: The pedestal is fabricated from Steel Inserted injection moulded black polypropylene hub cap and 5 nos. twin wheel castors). The pedestal is 615 ±8 MM. Pitch center dia. (715 ±10 MM with castors). Base Seat Back Seat Seat Height from Ground Width Depth/ length Thickness Width length Thickness 450 450 70 440 650 90 500. Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

VISITORS CHAIR: Visiotor Chair Model Honcho VIsitor: SEAT/BACK ASSEMBLY: 1070b (H) x 580b D X W 560. The seat is made up of 15 MM thick hot pressed plywood upholstered with Leatherette and Polyurethane Foam. The back is made up 15 MM. thick hot pressed plywood upholstered with Leatherette and molded polyurethane foam. The back ply and foam is designed to provide maximum lumber support for comfortable seating posture2. POLYURETHANE FOAM: The polyurethane (High density) foam for seat and back is moulded with density = 45 +/-2 kg/m3 and Hardness = 20 +/- 2.3. ARMRESTS: Wooden cladding on CRC Base and on Chrome plated Steel armrest. Make - Methodex/ Godrej / Herman Miller Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

VISITORS CHAIR (V-29 Visitor) : Providing & Fixing of Visitor Chair With Arms Rest : Overall dimensions : W 590 x D 630 x H 815 Seat Height - 450mm, Seat Size - W 490 x D430, Back Size - W 485 x H 450 Material : The seat and back shall be made of 12mm+1mm thick hot pressed ply and wood, upholstered with high quality fabric & molded polyurethane foam of 45-50kg/m3 density and 60mm thick. The foam shall have designed with contoured lumber support. Fabric cost Rs.300/mtr. app.Armrest: The armrest shall be made in one piece polyurethane reinforce with MS insert. Frame: The frame shall be made of CR tube 25x1.8 dia in cantilever shape reinforced at load bearing bands from inside.Back-ABS plastic cover. Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

REVOLVING CHAIRS (Model TB-R) : Size - H 1020 x D 715 x W 715 - SEAT/BACK ASSEMBLY : The seat is made up of 12 MM thick hot pressed plywood upholstered with Mesh fabric and seat of material PU Foam covered with Fabric. The back is made up High quality Nylon mesh. central tilt synchronic mechenisem .The back is made of stretched Mesh designed to provide maximum lumber support for comfortable seating posture POLYURETHANE FOAM: The polyurethane (High density) foam for seat is moulded with density = 45 +/-2 kg/m3and Hardness = 20 +/- 2.The mechanism is designed with the following features: Front pivot for tilt with feet resting on ground ensuring more comfort. Provides maximum adjustability and scope for comfort. Thickness of Polyurethane Foam Used in Seat in mm (+/- 2 mm)60 Seat & Back moves in same direction in the ratio of 1:3 and thus effecting a 9 degrees opening up of body. Backrest is made of one piece injection moulded frame. ARMRESTS: Fixed type Steel covered with polypropelene. Pedestal Base ABS Plasstic with ABS/Nylon Twin Caster Wheels Minimum 5 Nos of 50mm. Material of Fabric of Seat Cover foam laminated mesh fabrics GSM/Thickness of fabric ±5%(Gram/Square meter) 220 gram. Thickness of MS Plate Joining the under structure with Seat 2mm. Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

3 SEATER SOFA: Providing & Fixing Senate Two Seater Sofa Made of Good Quality Products of MSPL Standard Models. 12mm & 6mm Ultra Coat Ply Used Made Of Back & Base. Upholstery Made of Prime Quality Rexine Brown. Base Seat Moulded With Bonded Foam, ( 45mm + 21mm + 25mm ) Thick, D - 28KG/m3. Back Seat Moulded With Foam, 45 Thick, D - 28KG/m3. Front Body Moulded With Foam, 45 Thick, D - 28KG/m3. Back Inserted Foam Super Softy Foam 42mm + 90mm ) Thick D -28KG/m3. Back Body Made Of LD Foam 12mm Thick. Understructure Made of Base Frame Strongly Jointed Wooden Plywood Parts. Pinewood 25W x 25mm Thick. Seat Height From Bottom To Base 356mm. Back Height From Base Seat To Top 508mm. Seat 508 Depth.Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

CORNER TABLE: Providing & Fixing Overall Size 600 x 450 x 450H CORNER TABLE Table Top Square Type Made Of Prime Quality 19mm Thick Commercial Board Affix With 3mm Veneer At Top . Table Top in 19mm Thick Commercial Board . Wooden Leg Size 430mm Height. Understructure Top Supported Frame & Leg Made Of Prime Quality Solid Wood. Commercial Board Use Prime Quality With ISI Marked. All Wooden Panels Cleaning Corner Knitted Finish. Wooden Panel Joint Leg To Leg Supported To Top. Make - Methodex/ Godrej / Herman Miller .Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

CENTER TABLE: Providing & Fixing Overall Size 1200W x 600D x 450H CENTER TABLE Table Top Rectangular Type Made Of Prime Quality 19mm Thick Commercial Board Affix With 3mm Veneer At Top . Table Top in 19mm Thick Commercial Board . Wooden Leg Size 430mm Height. Understructure Top Supported Frame & Leg Made Of Prime Quality Solid Wood. Commercial Board Use Prime Quality With ISI Marked. All Wooden Panels Cleaning Corner Knitted Finish. Wooden Panel Joint Leg To Leg Supported To Top.Make - Methodex/ Godrej / Herman Miller . Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

CONFERENCE TABLE: Strategy 01 Providing Conference Table of size 6500 x 1800 x 750 structure as per approved drg., made up of 18mm thick plywood Front and side panels are made of 18mm.th. Ply board on exposed surfaces and internal surface is finished with 1mm mica laminate of approved shade (are over exposed surface). Footrest is provided at 150mm. ht from floor made of T.W. section 80mmx40mm. all hardware and adhesive of approved quality.Edges of the ply is to be protected by 6mm. thick T.W. Beading. Cable manager is to be provided in each module of ( 1.2mt. span) table .Malamine polish on veneer & T.W. members as per the approval of Engineer In charge in approved shade,texture& colour. Work include all material,labour, installation at site etc. complete.All work is to be executed as per the direction and approval of Engineer in charge . This work will include all hardware adhesive lead, lifts for all floor, labour etc complete and nothing will be paid extra for execution of the item. All work is to be executed as per the direction and approval of design team. Table Top surface area will be measured for payment. Make - Methodex/ Godrej / Herman Miller .. Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA

CONFERENCE TABLE: Strategy 03 Conference Table Top 36mm Thick PLPB Board ( OSL ) with 2mm Thick Pvc Edgebanded Finish With As Per Approved Laminate Shade. Top Supported Understructure of Table Gable - End ( OSL ) Made Of Prime Quality 36mm Thick PLPB Board. Modesty Panel Prime Quality 18mm Thick 450mm High PLPB Board Supported To Top. Conference Table Top Provided Pvc Wire Manager Flushed With Top.Wooden Panels Flat Edge Duly Sealed With 2mm Thick Pvc Beading. 36mm Thick Gable - End Top & Bottom Screw With SS Profile Leg. Conference Table Top Size 3600W X 1200D in 25mm Thick PLPB Board. Wooden Gable - End Size 625H. Conference Table Top Between Part Hollow Section Provision For Wire Management. Conference Table Top Divided Into Two Parts. All Wooden Panels Cleaning Corner Knitted Finish. All Wooden Panels, Gables & Modesty Fix Joints With Minifix Dowels & Other Fitting Equipment. All Wooden Panels Prime Quality Board With ISI Marked. Make - Methodex/ Godrej / Herman Miller .Certification Required ISO 14001,ISO 9001,45001 , GREEN PRO , AIOTA