Urban Improvement Trust Tender

Providing and fixing steel gate, grating and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide

150cm high fencing with angle iron 50x50x6mm. placed at every 3Mtr. apart 30cm. in ground embedded in cement concrete 1:3:6 (30x30x45cm) corner and every tenth post to be strutted with 50x50x6mm. angle iron provided with 6 horizontal lines and two diagonals of black barbed wire between two posts fitted and fixed with G.I. staples including earth work in excavation etc. complete.

P & F GI pipes (External works) with GI fittings (IS:1239 Mark) including trenching & refilling earth etc.50mm dia nominal bore

Structural steel work welded in built up sections, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level upto 4.5 mtr height.In flats, tees, angles and channels

Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete as per MoRTH specification clause 602. Cement concrete M-25 grade

Providing and fixing of precast concrete interlocking blocks of M 30 Grade 80mm thick manufactured form fully computerised automatic stationary hydraullic vibropressed machine and fully computerised automatic batchi ng plant of class A1/A2 as per BS 6717:2001 the CC interlocking paving blocks be laid on average 50 mm thick bed of coarse sand and the joint is to be filled with fine sand. laying procdeure on compacted sub-base as defined. complete job is to be executed as per the instruction of Engineer incharge the rates to be inclusive of all lead, lifts and taxes Gereral specification of blocks. 1- Shape as defined by Engineer incharge. 2- Tensile splitting strength and braking load as per BS 6717:2001, 3- Color Grey cement natural colour. 4- Variation in dimension less than 1.6 mm 5- Variation in thickness less than 3.2 mm 6- Abrasion As per BS: 6717:2001

Providing glass strips in joints of terrazzo/cement concrete floor :40mm wide and 5.5mm thick