Tribal Area Development Department Tender

If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.

Tribal Area Development Department Tender

Works
Civil And Construction
Building Construction
Eprocure
Opening Date14 Nov 2022
Closing Date5 Dec 2022
Tender Amount₹ 15,30,89,000 
Notes
Download

Costs

  • EMD

    ₹ 30,61,780
  • Document Cost

    ₹ 20,000
  • Tender Fee

    ₹ 1,000

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Random rubble dry stone kharanja under floor.

1302.72

-

567

... More
Filling available excavated earth (excluding rock) in trenches plinth side of foundation etc. in layers not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead up to 50 mtr and with all lift.

5200.96

-

52

... More
Providing and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III (1971) as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment).

3439.67

-

236

... More
Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate. M20 grade Nominal Mix (with graded stone aggregate 20mm nominal size)

26.15

-

4317

... More
Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate. M15 grade Nominal Mix (with graded stone aggregate 20mm nominal size)

54.7

-

3895

... More
Providing and laying in position cement concrete including curing compaction etc. Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size.)

1080.28

-

2988

... More
Providing and laying in position cement concrete including curing compaction etc. Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size.)

120.47

-

2840

... More
Random Rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in : Cement Mortar 1:6 (1 cement : 6 Sand)

2617.3

-

2117

... More
Random Rubble stone masonary for superstructure above plinth level one storey height above 30 cm. thick walls in : Cement mortar 1:6 ( 1 Cement : 6 Sand )

470.4

-

2504

... More
Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M25 Grade nominal mix (with graded stone aggregate 20mm nominal size)

1185.97

-

5165

... More
Random Rubble stone masonry for foundation and plinth in cement sand mortar above 30 cm thick wall in : Cement Mortar 1:4 (1 cement : 4 Sand)

72.16

-

2444

... More
Providing and layingin position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with redering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering shuttering and reinforcement for. Walls (any thickness) including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. M25 graded Nominal Mix ( with greded ston aggredgate 20mm nominal size

753.78

-

5325

... More
Providing and layingin position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with redering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering shuttering and reinforcement for. Beams, suspended floors, roofs, griders having slopes up to 15', landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. M25 grade Nominal Mix ( with greded ston aggredgate 20mm nominal size

2271.33

-

5349

... More
Providing and layingin position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with redering in cement sand mortar 1:3 (1 cement : 3 coarse sand) and making good the joints excludingthe cost of centering shuttering and reinforcement for. Beams, suspended floors, roofs, griders having slopes up to 15', landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases. M20 grade Nomial mix (with graded stone aggregate 20MM nominal size)

32.14

-

5197

... More
Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation in basements rafts, footings, straps beams, bases of columns etc. up to plinth level.

2524.19

-

109

... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for: Walls (any thickness) including attached pilasters, buttresses plinth and string course.

939.04

-

166

... More
Providing and laying in position specified grade of reinforcement cement concrete all RCC structural elements upto plinth level including curing compaction finishing with rendering in cement sand mortar 1:3 ( 1 cement : 3 coarse sand) and making good the joints excluding the cost of centering shuttering and reinforcement M20 Grade nominal mix (with graded stone aggregate 20mm nominal size)

60.42

-

5013

... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for Suspended floors, roofs landings staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam etc.

14324.38

-

216

... More
Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with wooden members and removal of formwork for upto floor three level for Columns, pillars, posts and struts etc.

7865.72

-

204

... More
Add extra for shuttering in circular work in plan up to dia 10mtr

44.63

-

36.5

... More
Extra for using steel telescopic prop instead of wooden member

4254.37

-

22

... More
Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Thermo-mechanically Treated bars (TMT) (Conforming to relevent IS code)

462557.13

-

72

... More
Brick masonary in brick work in super structure up to third storey of class designation 75 in Cement mortar 1:6(1 cement : 6 coarse sand)

3052.77

-

3700

... More
Brick masonary in foundation and plinth with bricks of class designation 75 in Cement mortar 1:6(1 cement : 6 coarse sand)

52.29

-

3507

... More
Half brick masonry in super structure up to third story including cost of nominal hoop reinforcement (2 nos. 6mm Dia ms bar at every forth course) using bricks of designation 75 in (for non load bearing walls) Cement mortar 1 : 4 (1 cement : 4 coarse sand)

2070.28

-

468

... More
Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges : 50mm thick.

133.9

-

798

... More
Supplying and fixing dressed sand or other approved stone shelves, tands in cement mortar 1:3 with fine dressed edges : 75mm thick.

1.86

-

1197

... More
Supplying and fixing rough dressed stone sills, dasa, coping cornices sriwan, string courses etc. in cement mortar 1:4 including pointing with admixture of pigment matching with the stone shades. 75 mm thick

98.24

-

1300

... More
Brick masonary in foundation & plinth with brick of class designation 75 in Cement mortar 1:4 (1 cement : 4 coarse sand)

13.37

-

3659

... More
Supplying and fixing in walls machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges : Kota stone 25 to 30mm thick.

1702.99

-

629

... More
Extra over item for machine cut both side polished stone is used.

1578.66

-

65

... More
Providing and fixing Granite stone slab thickness 16-18 mm mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of: Jhanshi (Red / Choclate Colour)

545.39

-

4501

... More
Extra for providing edge moulding to 16 - 18 mm thick marble stone counters . vantities etc. Over item including machines polishing to edge to give high gloss finish etc. Complete as per design approved by Engineer - in- charge.

-

-

-

... More
Marble work / Kota stone

2647.33

-

160

... More
Granite Work

417.72

-

250

... More
Providing and fixing 1st quality standard white, grey, ivoty, fume red brown, light green, light blue and other light shades glazed tiles ISI marked [IS : 13753] & IS 15622 of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster on walls and pillar.) Category-B : Bell, Orient, Thar make etc.

2752.03

-

776

... More
Providing and fixing 1st quality MAT finished ceremic tile size 400x400mm comfirming to IS : 13753 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of meat cenent slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing wiht flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) Category - B Bell, Orient, Thar make etc.

832.65

-

1087

... More
Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm comfirming to IS : 13753 & Is 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry including nicely finished joints using water proof joint filler powder (Untile or Roffe make) and finishing wiht flush pointing in white cement mixed with pigment to match the shade of tile complete (including the cost of cement mortar bed 1:4) Category - B Bell, Orient, Thar make etc.

119.24

-

932

... More
P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. Size 600 mm x 600 mm

670.31

-

1419

... More
Supplying & fixing door, window, chowkhats and other frames, including antitermite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded in cement concrete M-15 grade : Sal wood Grade - I.

1.64

-

79144

... More
Providing and fixing fully panelled double leaf shutter for doors as per approved design and drawing with approval ordinary C.P./ oxidised steel fittings as per Annexure 'A' and width of styles & top rails of 100 mm and lock rails width of 150 mm and bottom rails of 200 mm width including teak wood beading of size 19 mm x12 mm on both faces complete. 40 mm thick wood sqm M.P. Teak Wood Gr-II ISI 12 mm thick teak ply (both faces panels)

30.25

-

6874

... More
Providing and fixing partly panelled and partly glazed with 4mm plain glass double leaf shutters for windows and ventilators as per approved design and drawings with approved steel fittings as per Annexure ‘A’ and width of styles, bottom and top rails 75mm including intermediate rails 50mm wide, beading of 25mm x 15mm size on both faces : 30mm thick MP teak wood grade-II ISI 12mm thick teak ply (both faces) panels

7.53

-

4814

... More
Providing Brass fittings (Bush or equi.) partly panelled and partly glazed doors & windows

37.79

-

328

... More
Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure 'A' : 35 mm thick .

503.33

-

2095

... More
Add extra in Flush doors : For external teak wood lipping on flush door. 35mm x 6 mm

1488.03

-

102

... More
Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete above plinth level upto 4.5 mtr height. Hot finished welded type tubes.

4900

-

119

... More
Providing and fixing T -iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws of rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

16933

-

100

... More
Provinding and fixing in position S.S. hand rail in main stair case. Landing , balaconies etc. in 2" (50mm) dia S.S. pipe 1.5mm 304 grade testing on 1" (25mm) S.S. pipe 1.5mm thick 304 grade size S.S. 304 grade square bars 10mm , of clear height 90cms placed at 30cm C/C including making necessary hold fass fixture (10mm square bars 22 cm long ) embedded in starecase conctete for resting the S.S. 304 grade. vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete.

170.61

-

2250

... More
Provinding and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and bracket with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia steel pulleys/ball bearing complete with bolts, nuts locking arrangements inside and outsinde stoppers, handles etc. as per specification including applyig a priming coat of approved steel primer. (To be measured and paid as per outer dimension.) with 100mm opening when closed.

58.8

-

3093

... More
Providing and fixing M.S. sheet single leaf door shutter in angle iron fram 35x35x5mm suitabilly diagonally bracked with 25x3mm flat iron above and below lock rail of size 50x5mm beading extra including all fittings, as per direction of Engineer-in-charge but excluding cost of chowkhats: including two coats of anti-corrosive red oxide primer paint. M.S. Sheet 22 S.W.G.

307.92

-

1670

... More
Provinding and fixing steel glazed doors windows and ventilator shutterd of standard rolled steel section joints mitred and welded eiht steel lugs 13x3mm, 10cm, long embedded in cement concrete block 15x10x10cm of 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm mominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and othe fitting except necessary hinges of pivots steel handles peg stay etc. as per required: For overall portion treated as fixed

65.4

-

1042

... More
-----do ---- Partly fixed and partly openable [fixed area not to exceed 33%]

708.94

-

2665

... More
Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.

774.34

-

585

... More
Providing and fixing square bars or other flats welded to window, ventilators etc 10mm Square bars.

4677.29

-

86

... More
Supply and fixing steel sheet double leaf shutter (almirah Type) with 18 gauge steel frame (Border) and 20 gauge steel shutter including vertical ribs of 40 mm width and 10 mm depth to be spot welded at every leaf or width more than 400 mm of 20 gauge, internal lever locking arrangement and direction of engineer incharge.

1055.58

-

2306

... More
Providing batta (Gola) 75mmX75mm in cement concrate (1:2:4) including finishing with cement morter 1:3 as per standerd design.

1597.23

-

40.5

... More
Spreading of hot blown bitumen (IS grade 25/85, 25/90 industrial grade) applied at 175 to 180 degree C @ rate of 1.70 kg per Sqm complete.

3744.55

-

89

... More
Provinding brick kharanja in cement sand mortar 1:4 in square pattern over roof of ground floor: 75 mm to 100mm thick average

3744.55

-

338.5

... More
Add extra laying brick kharanja over F.F & subsiquvant story for each

2851.95

-

62

... More
Filling of sunk portion of roof with earthen pots os required height including filling voids with 1:2:4 light concrete, using brick bats with cmplete levelling and dressing the surface by 50mm thick cement concrete 1:2:4 as per specification.

218.09

-

1080

... More
Providing and laying water proofing treatment in sunken portion of WCs ,bathroom etc., by applying Polymer modified cementous slurry mixed with Armour cerate of M/s The Structural Water Proofing Company Pvt. Ltd. Or Tapecrete of M/s Cico Engineer Service or Hydro Proof of Fosroc consist ing of appearing: first layer of slurry of cement @ 0.488 kg/sqm mixed with Armourcrete or Tapecrete @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours Second layer of slurry of cement @ .242 kg/sqm mixed with Armourcrete or Tapecrete @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry.

757.14

-

181

... More
P & F Plain Fiber glass sheet (FRP sheet fiber Reinforcement product sheet confirming to IS:12866-1989 having minimum thickness as below including fixing with nuts bolts hooks and bitumen washer etc. complete.) 3mm thick (Wt. 5.0 Kg./Mtr.Sq.)

683.47

-

1734

... More
Finishing with 25mm thick cement plaster on roofs in cement sand mortar 1:4 mix including water proofing compound @ 2% of cement used, with neat cement finished curing etc. complete in all respect including making of 300mm x 300mm square.

790.14

-

173

... More
Providing and fixing steel gate grating and grills made of angles, tees, square bars or flats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide.

1500

-

93

... More
Provinding brick kharanja in cement sand mortar 1:4 in square pattern over roof of ground floor: 55 mm to 60mm thick average

44.13

-

322.5

... More
--- do---- Add extra laying brick kharanja over F.F & subsiquvant story for each

884.16

-

31

... More
Providing and laying 20 to 25 mm size glazed tiles pieces for roof treatment having colour and shade as approved by the Engineer incharge over 25mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect washing with acid.

3501.58

-

400

... More
Providing corrugated G.I. sheet roofing fixrf with G.I.J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto a pitch of 60 degree) & excluding the cost of purlins rafters and truses, for class of sheets.

157.93

-

583

... More
Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete: for area of slab upto 900Sq. Cm. 25mm thick slab

488.49

-

667

... More
Polished Blue Kota Stone flooring skirting, laid over 20mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete:25mm thick slab. Area 2001 to 5000 sqcm

6518.69

-

772

... More
35mm thick Rough chiesel dressed stone flooring of approved shade set in pattern over 20mm thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) and jointed with cement sand mortar 1:3 complete in all respects: Kota Stone

1173.9

-

470

... More
Providing & laying Chequered plain cement concrete embossed o specially manufatured non-slipping tiles of approved make 20mm thick laid on 20mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete.

188.05

-

341

... More
Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 20mm thick

26757.78

-

142

... More
Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 25mm thick

16253.9

-

178

... More
6 mm cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand)

9054.14

-

120

... More
Finishing with neat cemant (punning)

379.59

-

31

... More
Making grooves as per design in plaster 10mm to 20mm wide

4221.32

-

6.8

... More
Applying white cement based putty with approved brand over cement plaster surface for making even surface

35811.93

-

176

... More
Finishing wall with water proofing cement paint of approved brand and manufacture and or required shade to give an even shade including all scaffolding. New Work ( Three or more coats)

3363.45

-

40

... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding New work (two or more coats) over and including scrapping and priming coat with cement Drimer.

35811.91

-

54

... More
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work incluidng prepraton of base with primer putty lipp complete in all reapect.

11122.02

-

66.5

... More
Painting with enamel paint of approved brand and manufacture to give an even shade :

5229.16

-

67

... More
Painting on new surface with duco paint (IC or equivalent) to give an even shade (minimum 4 coats) with preparation of surface by rubbing, primer coats, duco filler putty including polishing etc. complete: on New steel work

2193.92

-

223

... More
French sprit polishing Two or more coats on new work including a coat of wood filler

87.89

-

145

... More
Add extra over for combination flooring of Blue Kota and Marble stones Using above 15% and upto 20% marble stone

2563.95

-

80.5

... More
Making rebaring of steel reinforcement 8mm to 25mm dia bar including drilling of hall by mechanical means in RCC, Encasing reinforcement & filling apoxi. by gun.

300

-

50

... More
providing & fixing chicken mesh in plaster for column, beam & wall joints

380

-

50

... More
Making grove upto 5mm in granite stone step of staircase etc as per engineer incharge .

696.67

-

30

... More
Making of Drip course (Tapaka) in cement sand mortar 1:6 width upto 40 mm and 10 mm thick as per approved design

525.49

-

6.8

... More
Providing and fixing in position Aluminum plate as per design for expansion joints.

75

-

369

... More
Providing and fixing in position bitumen impregnated fiberboard confirming to IS: 1838-1961 in expansion joints including the cost of primer sealing compound. 25 mm. thick

241.54

-

1201

... More
Providing and fixing Aluminum sheet 2.0 mm thick and 150mm. Wide over expansion joint with fixing rowl plug and aluminum screws as per designs to match the colour shade of the distemper or wall treatment.

79.25

-

304

... More
Providing and placing in position suitable PVC water Stops confirming to IS: 12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete. Kickers (320 mm wide, 5 mm thick)

91.44

-

640

... More
Grinding and polishing on mosaic/polished stone flooring: New Surface

10

-

109

... More
Providing and fixing steel gate grating and grills made of angles, tees, square bars or flats black pipe with holdfast and fittings complete as per deign and drawing including cutting welding and fabrication with priming coat of red oxide.

1515.23

-

93

... More
Add extra of square rectangular hollow tubular section are used.

315.23

-

12

... More
120CM high fencing with angle iron posts 50x50x6mm placed at every 3 Mtr. apart embedded in cement concrete, 1:1.5:3 (60x60x30cm) corner and every tenth post to be strutted with 50x50x6mm angle iron provided with three horizontal lines and two diagonal of black barbed wire between two posts fitted and fixed with G.I. staples 1:1.5:3 concrete will paid extra complete.

557.78

-

442.33

... More
Providing and fixing of precast concrete interlocking block of M 30 grade manufactured from fully computerised automatic stationery hydraulic vibropressed machine and fully computerised automatic batching plant of class A1/A2 as per BS 6717:2001. The CC interlocking paving blocks be laid on average 50 mm. thick bed of coarse sand and the joint on is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead, Lifts and taxes General specification of blocks: 1) Shape as defined by Engineer incharge 2) Tensile splitting strength and braking load as per BS 6717:2001 3) Color : Grey cement natural colour. 4) Variation in dimension : Less than 1.6 mm. 5) Variation in thickness : Less than 3.2 mm. 6) Abrasion : As per BS : 6717:2001 (11.57) 60mm thick interlocking blocks

2837.64

-

430

... More
S & FCC 1:2:4 (M-15) Precast kerb on dand upto 60 cm length over 20mm thick base of cement mortar 1:6 including jointing, earthwork, painiting and jointing with cement mortar 1:4 of size. 15x40cm

1205.24

-

300

... More
Supply of different varities of tree/shrubs/climbers according to height and age of the plant at side including loading/unloading & transportation etc. complete Different varieties of climbers 900mm to 1500 mm

200

-

96.6

... More
Digging pits in ordinary soil and refilling the same with the excavated earth mixed with manure in the ratio of 2:1 by volume ( 2parts of stacked volume of earth after reduction by 20% 1 part of stacked volume of manure after reduction by 8%) flooding with water and dressing including removal of surplus earth (Cost of manure or extra good earth if needed to be paid separately) pit dia 60 cm x60 cm deep.

200

-

28

... More
Finishing with white cement punning for wall tiles

1392.85

-

31

... More
Renewing glass panes, with putty and nails wherever necessary : 4 mm thick plain glass panes Unit 10 Sqm

-

-

-

... More
Door vent

69.77

-

648

... More
Water supply & sanitary

-

-

-

... More
P & F Indian type white glazed vitreous china 1st quality W.C. orissa pan (I.S: 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor:

-

-

-

... More
Size 580x440 mm

77

-

1794

... More
P & F European type white glazed vitreous china 1st quality W.C. pan (I.S: 2556 Mark) with P or S trap including cutting and making good the wall and floor.

19

-

1499

... More
P&F Water closet Seat Covers with brass hinges Complete: Solid Pvc (ISI Marked) grade -1 Black for EWC

19

-

684

... More
P & F Low level Flushing Cistern of 10 litres capacith (IS : 2556 mark), of approve make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS : 1703 mark) complete including cutting and making good the wall:

-

-

-

... More
PVC with PVC bend as per IS 7231

11

-

1463

... More
P & F WVC wash basin (1st quality, I.S.: 2556 mark) of approved make with C.P. pillar cock (I.S.: 8934 mark) & 32mm C.P. brass waste coupling of approved make, 25 mm G.I. waste pipe complete including cutting & making good the wall. Size 580 X450 mm

102

-

2570

... More
P & F Beveled edge Mirror of special glass of approved make complete with 6 mm thick asbestos cement sheet ground fixed to wooden screw & washers. Size 600 x 450mmx4mm thick.

125

-

427

... More
P & F Gratting of approved quality / make Stanless steel sheet size 125 mm dia

350

-

78

... More
P & F GI pipes (Internal works) with GI fitting excluding Union (IS 1239 mark) and MS clamps, including Concealed pipe in wall including anticorrosive bitumen paint

-

-

-

... More
15 mm dia nominal bore B class

470

-

239

... More
25 mm dia nominal bore B class

545

-

341

... More
P & F GI pipes (External works) with GI fitting excluding Union (IS 1239 mark) and MS clamps, including cutting and Exposed on wall

-

-

-

... More
15 mm dia nominal bore B class

320

-

213

... More
25 mm dia nominal bore B class

418.71

-

313

... More
32 mm dia nominal bore B class

300

-

428

... More
50 mm dia nominal bore B class

485

-

607

... More
63 mm dia nominal bore B class

80

-

651

... More
S&F G.I/. Union ISI Marked In G.I. Pipe line as required complete in all respect of size.

-

-

-

... More
15 mm dia nominal bore

81

-

65

... More
25 mm dia nominal bore

81

-

138

... More
32 mm dia nominal bore

60

-

183

... More
50 mm dia nominal bore

62

-

330

... More
P & F Bib cock (IS : 8931 mark) superior quality of approved make C.P. brass bib cock 15mm nominal bore.

161

-

711

... More
P & F Bib cock (IS : 8931 mark) superior quality of approved make long body C.P. brass bib cock 15mm nominal bore. Weight not less than 690 gm

163

-

922

... More
P & F stop cock (IS :8931 mark), superior quality & of approved make brass 400 gm 15mm nominal bore.

6

-

396

... More
P & F stop cock (IS :8931 mark), superior quality & of approved make 15mm nominal bore. C.P. brass

80

-

766

... More
P&F Inlet connection (Angle Valves) Superior quality, of approved make, for Wash basin, gyser etc, C.P, Inlet connection 15 mm brass (IS : 8931 marked) with 37cm long pipe & nut

120

-

844

... More
P & F Flush cock /Flush Valve (IS : 9758 mark For WC of approved Quality make CP brass Concealed 25 mm nominal bore

95

-

1132

... More
P & F Full way valve (IS : 778 mark or wheel valve of approved make.

-

-

-

... More
Gun-metal 15 mm dia nominal bore

68

-

363

... More
Gun-metal 25 mm dia nominal bore

64

-

705

... More
Gun-metal 32 mm dia nominal bore

23

-

855

... More
Gun-metal 50 mm dia nominal bore

23

-

1655

... More
P & F ball cock (IS: 1703 Mark) with rod & pvc ball complete make 750 gm 15mm nominal size

61

-

383

... More
P&F PVC Storage Tank (IS : 12701 marked indicating the BIS license No.) of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design. 1000 litres

43

-

9348

... More
--Do-- 750 litres capacity

15

-

6288

... More
--Do-- 500 litres capacity

2

-

4982

... More
P & F stop cock (IS :8931 mark), superior quality & of approved make 15mm nominal bore. C.P. brass Concealed Stop Cock 15mm.

37

-

911

... More
Providing & laying C.C. 1:5:10 (stone aggregate 40mm nominal size) all around S.W. pipe including 15Cm. Thick bed concrete(width W = diameter of pipe in cm+30cm) copncrete width to be reduced from width W at center of pipe to O at top of pipe, (excluding cost of pipe)

-

-

-

... More
around 160mm rigid PVC pipe

248

-

338

... More
P& F& Joining R.C.C. class NP-2 Non Pressure pipes (IS:458 mark) of approved make with collars, jointed with C.M. 1:2 or having spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete: 300mm dia internal

162.15

-

510

... More
P&F rigid PVC pipe fitting (IS : 4985 mark) of approved quality/makw including joining the pipe with solvent cement ruber ring and lubricant :

-

-

-

... More
Coppler

-

-

-

... More
110 mm dia

216

-

106

121

-

96.5

... More
Plain Tee

-

-

-

... More
110 mm dia

204

-

194

122

-

118

... More
Door Y

-

-

-

... More
110 mm dia

180

-

278

115

-

178

... More
Bend 87.5

-

-

-

... More
110 mm dia

296

-

150

124

-

102

... More
Plain Floor Trap

-

-

-

... More
110 mm dia

266

-

213

... More
Pipe Clip

-

-

-

... More
110 mm dia

511

-

43.5

175

-

38

... More
P & F rigid PVC pipe (IS:4985 mark) class II(4kg./Cm.) approved quality / make including joining the pipe with solvent cement rubber ring and lubricant.

-

-

-

... More
75 mm dia

440

-

139

... More
110 mm dia

1905

-

228

... More
160 mm dia

295

-

285

... More
Construction of Main hole, in all types of soil, inner size .90 * .60 M, with 450mm thick masonry in CM 1:6, 10 CM. thick cement concrete 1:5:10 in foundation, 20mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring Ferro cement cover with frame of 450mm dia earth work etc complete including disposal of surplus earth with in 50 mtr lead as per design Depth up to 0.5 M

34

-

3681

... More
Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring, earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.:

-

-

-

... More
Size 240 Cm. dia outside & 240 Cm. depth

8

-

10120

... More
Making of hole (with up to 150 mm) in R.C.C. slab/ wall beams bt power driven drilling machine complete as per directions EI.

-

-

-

... More
Upto 150mm thick.

125

-

127

... More
P &F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor. 1.0 mm thick Salem stainless steek AISI- 304 kitchen sink of approved make with large waste couplin Overall Sizes 24 x 18 x 8 Bowl sizes 20 x 16 x 8

14

-

5565

... More
Add extra if R.C.C slab of designed thickness & reinforcement is provided on manhole in place of stone slab( Actual area of R.C.C slab to be measured).

46

-

245

... More
Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr. Size 200 x 100 x 130 cms (for 10 users)

2

-

18370

... More
Making connection of GI distribution branch with GI main including all fitting

-

-

-

... More
Upto 25mm dia

44

-

220

... More
Beyond 25mm dia and upto 100mm dia

27

-

426

... More
Tube Well

-

-

-

... More
Construction Of Tube Well upto 100mtr depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of followinf sizes in all types of soil and over burdens including lowering of casing pipes but excluding cost of casing pipes as per IS:2800(Part I & II) 1979 specifications the work would be completed after obtaining sand free water. the tube well should have throughout bore as pere nominal dia. of casing pipe (site to be verified by approved geologist): 150mm Dia nominal bore.

305

-

998

... More
Supply of ERW M.S. black casing pipe ISI marked (IS : 4270/1992) OF GRADE Fe410 of following sizes at site of work. Nominal bore of pipe (mm) 150, Outside dia of pipe (mm) 168.30, Thickness of pipe (mm) 5.0, Massof plane tube (kg/m) 20.13

80

-

1970

... More
S & F tube well cover of M.S. Sheet (6mm thick) with nuts and bolts complete for casing size 150 mm dia

3

-

397

... More
S & F M.S. clamp set of 50x 6 mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.

3

-

422

... More
Providing & fixing of HDPE pipe ISI mark (IS:4984/95) for water supply (suitable for submersible & jet pump) with required fittings.

-

-

-

... More
Vertical installation 63 mm OD 6kg/cm2

300

-

130

... More
Horizantal installation 63mm OD 4kg/cm2

244

-

117

... More
SITC of radial / mixed flow submersible motor pump sets ISI marked (IS:8034-1989) of approved make with required accessories including making connection suitable for T.W./ D.C.B./ Open well. The job includes lowering of riser pipe, G.I./ H.D.P.E. pipe with rope, cables, installation of complete fitting and accessories, jointing of electrical cables up to switch board. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. 100 mm diameter Submersible pump shall have following HP Rating, phase, Head, minimum Discharge respectively.

-

-

-

... More
3.00 HP 1-Ø (69-125)mtr (110-33)LPM

3

-

23057

... More
Providing of synthetic rope for submersible pump ISI marked ( IS:5175) of following size.

-

-

-

... More
16mm (suitable above 50mm & up to 75mm OD pipe)

315

-

37

... More
P/Laying ISI marked P.V.C. insulated submersible cable confirming to IS:694 with flexible copper conductor including making connection etc. as required.

-

-

-

... More
4.0 Sq.mm 3 core flat / Round (Gr. 1)

432.81

-

128

... More
Supply and fixing of Oil / Air break Starter panel made out of sheet steel powder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors. For single phase Submersible / Monoblock pump 0.5 HP to 3.0 HP

3

-

3150

... More
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. Gr-I

-

-

-

... More
Short point (up to 3 mtr.)

259

-

260

... More
Medium point (up to 6 mtr.)

716

-

377

... More
Long point (up to 10 mtr..)

1098

-

508

... More
Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. Gr-I

-

-

-

... More
On board

486

-

244

... More
Medium point (up to 6 mtr.)

19

-

445

... More
Long point (up to 10 mtr..)

330

-

571

... More
Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection, testing, etc. as required. Gr-I

143

-

538

... More
P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required. Gr-I

-

-

-

... More
5 step fan regulator 2 Module

544

-

460

... More
Blanking plate

356

-

19

... More
Modular MCB 6 A to 32 A DP (IS:8832 marked)

17

-

285

... More
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. Gr-I

-

-

-

... More
1 x 1.5 sq.mm

4650

-

14

... More
2 x 2.5 sq. mm. + 1x1.5sqmm

6175

-

53

... More
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm

3209

-

77

... More
2 x 6.0 sq. mm. + 1 x 2.5 sq. mm

1560

-

109

... More
4 x 6.0 sq.mm

683

-

176

... More
1 x 10.0 sq.mm

50

-

78

... More
4 x 10.0 sq.mm

1170

-

305

... More
1x 4.0 Sq.mm.

1470

-

30

... More
1 x 16.0 sq.mm

95

-

131

... More
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Gr-I

-

-

-

... More
Double door (Three phase)

-

-

-

24

-

2070

6

-

1820

... More
Double door (single phase)

-

-

-

... More
12 Way

30

-

1065

1

-

860

... More
P&F recessed mounting heavy duty sheet steel End Box for distribution board duly phophatised powder coated complete as required. Gr-I

-

-

-

... More
6 way DB

24

-

550

... More
P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. Gr-I

-

-

-

... More
Single pole MCB 6 A to 32 A rating

824

-

151

... More
Double pole MCB 6A-32rating

26

-

401

... More
Double pole MCB 40 A rating

24

-

689

... More
Four pole MCB 40-63 A rating

18

-

1378

... More
S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. Gr-I

-

-

-

3840

-

32

5090

-

42

1330

-

81

20

-

107

... More
Making of hole in wall of required size for housing exhaust fan and making good the same, with cement plaster as required of following size:

45

-

200

... More
Up to 457 mm size

-

-

-

... More
P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . Gr-I

544

-

95

... More
P&F of Heavy duty capacitor start, Double ball bearing 900/1400 RPM single phase ISI marked Exhaust fan,IS:2312 marked in existing opening including making connections testing etc. as required. Gr-I

-

-

-

... More
300 mm sweep(900/1400 RPM)

38

-

3002

... More
P & F of IP20 LED tube ligh20 watt with externalbatten made from CRCA sheet steelsuitable to replace T-8/T-12 tube light ,integral driver ,2000 lumen +5% tolerence system lumen efficiency of 100 Lm /watt minimum expected life timeof 25000 burning hours ,CCT 5700K ANSI ,CRI 80 ,driver efficiency 85%,Life expantancy of driver minimum 30000 Hr. PF 0.95 at full load /230 volt Gr-I

-

-

-

... More
4' LED Tube shape fixture 18W

521

-

280

... More
P&F of Gravity Louver shutter of superior quality made out of 18 S.W.G.M.S. sheet and Louvers made from 24 swg MS sheet with enamel paint including cost of nuts, bolts, etc as reqd.

-

-

-

... More
Up to 380 mm size

24

-

169

... More
P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. Gr-I

-

-

-

... More
1200 mm Sweep 5 Star rated

345

-

1896

... More
P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required. Gr-I

-

-

-

... More
400 mm sweep(Oscillating type)

8

-

2649

... More
P&F of Double ball bearing, capacitor start single phase metallic blade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required. Gr-I

-

-

-

... More
300 mm sweep

3

-

1856

... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. Armored Cable

-

-

-

... More
120 sqmmx 3.5 core

200

-

636

... More
50 sqmmx 3.5 core

20

-

299

... More
10 sqmmx 4 core

1000

-

170

... More
16 sqmmx 4 core

590

-

178

... More
6 sqmmx 2 core

71

-

124

... More
95 Sq.mm x 3.5 core

80

-

523

... More
10.0 Sq.mm x 2 core

300

-

137

... More
P & F double ball bearing capacitor start aliminium body & blade ceiling fan of with down rod up to 30 cm with 3 x 1.5 sq. mm PVC insulated flexible copper conductor making testing etc. as required. Group-1 1200mm sweep

136

-

1451

... More
P & Laying XLPE insulated IS:7098/II/85 of Group1 and approved make H.T.cable for working voltage 11 K.V.Earthed direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, IInd class bricks covering, refilling earth, compaction of earth, making necessary connection testing etc.as required of size.

-

-

-

... More
3 core 120.0 Sq.mm

200

-

983

... More
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of Group1 and approved make suitable for XLPE insulated 11 KV / 33 KV cable, with required components, prepration of cable ends,testing etc. as required of following sizes .

-

-

-

... More
11 KV End Termination Kit Indoor type

-

-

-

... More
3 core 120/150/185 Sq.mm

4

-

5000

... More
11 KV End Termination Kit Outdoor type

-

-

-

... More
3 core 120/150/185 Sq.mm

4

-

6500

... More
P / L of Double wall corrugated HDPE pipe confirming to IS : 14930 P - 1 & 2 with HDPE Coupler at 1 mtr. Depth below the ground for laying cable including making the trench and back filling , compaction of earth as required of Gemini or IS:14930 marked make. Outer Dia. / Inner dia.

-

-

-

... More
110 / 95 mm

1000

-

200

... More
160 / 136 mm

350

-

295

... More
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.

-

-

-

... More
GI pipe 2000 mm long ,50 / 25mm, ,terminal 12mm GI strip

11

-

6150

... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

-

-

-

... More
8 SWG copper Wire

160

-

79

... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

-

-

-

... More
25mm x 3mm copper strip

40

-

488

... More
S & Laying following size' B ' class G.I. Pipe confirming to IS : 1239 P - 1 ( 1990 ) with accessories for laying earth conductor/strip / cable in ground/surface/recess as required

-

-

-

... More
40 mm dia.

40

-

274

... More
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.

-

-

-

... More
With Strip in Pipe Technology with 80 - 100 micron GI Coating

-

-

-

... More
GI pipe 2000 mm long ,63 / 80mm, Inner strip 50 mm x 3 mm copper

2

-

8970

... More
P&F of IP 20 LED Recessed/Surface Mounted Round/ Square non-Dimmable Downlight with die-cast aluminum housing & Heat Sing for heat dissipation, high purity reflector with externa. BIS certified 2.5 KV surge protected driver having efficiency -85% and in compliance to IEC standards. System Lumen efficacy of 100 Lm / Watt and life time of minimum 35000 burning hours with 70% of intial lumen maintaned, CCT 3000K/4000K/6000K, maximum power consumption should not more than the specified rating and fixtures shall be of CE complianed. LED Downlight 18/20 watt

70

-

947

... More
P&F of IP65 protected LED Street Light Luminaire on existing bracket. Fixture made of powder coated single piece pressure die cast aluminum with heat dissipation fins on housing with UV stabilized PC/Toughened Glass cover (from 45W onwards) and should be secondary lens on each LED The System level Luminaire efficacy =100 with High Power LEDs of CREE / NICHIA / 0SRAM / PHILIPS / SEOUL make is to be used. The LED Driver shall be BIS certified and lnput Voltage AC 110 to 270V AC with Input Frequency 50Hz+3% Power Factor 0.95 Driver Efficiency 85%, THD(I) 10% Humidity 10% to90% RH Working Temp -20C to 50C Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% initial lumens maintained , Rendering Index 75%. Surge protection shall be min a5 KV internal and min 10KV external. Manufactures Word Mark/Name Engraved/Embossed on die cast housing to allow traceability/authenticity till life of fixture. Fixtures shall be CE complianed.

-

-

-

... More
LED Street Light fixture 45 Watt

4

-

4284

... More
LED Street Light fixture 70 Watt

8

-

5063

... More
LED Street Light fixture 100 Watt

18

-

8503

... More
LED street Lifht fixture 30 Watt.

10

-

2385

... More
LED Street Light fixture 90 Watt

10

-

7343

... More
P & F of Gravity Louver shutter of superior quality made out of frame of 18 swg M.S. sheet & Louvers made from 24 swg MS Sheet with enamel paint including cost of nuts, bolts, etc as reqd. Appropriate OEM test certificate shall be submitted by contractor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .Up to 380 mm size Gr-I

-

-

-

... More
Up to 380 mm size

16

-

169

... More
S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required.

-

-

-

... More
32 mm Dia.

30

-

410

... More
SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required. Gr-I

-

-

-

... More
up to 100 Amp , 25 kA, fixed O/L & S/C setting

14

-

4302

... More
up to 125 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu

2

-

7800

... More
200 Amp , 25/35kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu

4

-

16210

... More
up to 100 Amp , 25 kA, Adjustibal O/L & fixed S/C setting

6

-

6341

... More
250 Amp , 35 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu

1

-

18989

... More
Supplying and fixing of Aluminium / Copper bus bar by means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves.

-

-

-

... More
Electrolytic grade Copper bus bar

65

-

675

... More
SITC of wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel made out of CRCA sheet , required hardware ,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shade The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear . Thickness of sheet shall not be less than 1.6 mm up to 600 mm length / width of any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall be of 2.0 mm thick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / without detachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) Gr-I

27

-

2752

... More
SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Gr-I

-

-

-

... More
Digital type

4

-

1100

... More
SF of CT operated direct reading type Ampere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Gr-I

-

-

-

... More
Below 500A

4

-

1100

... More
SF of 110/220 V, LED (22.5 mm dia ) Indicating lamp with integral circuit, terminal block, including connection etc. as required. Gr-I

-

-

-

... More
Red/yellow/Green colour

14

-

150

... More
Blue colour

2

-

250

... More
SF of CT linked selector switch of 10 A for Ampere meter (4 position ) including making connection etc. as required . Gr-I

5

-

286

... More
SF of selector switch of 10 A for voltmeter (4 position ) including making connection etc. as required .

5

-

228

... More
P&F on load change over switch, front handle operated, four pole 415 V conforming to IS:13947 P-III including connections , testing etc. as required in the following rating: Gr-I

-

-

-

1

-

12558

... More
P & F Star rated double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.

-

-

-

... More
1200 mm Sweep 5 Star rated

63

-

1896

... More
P & F ISI marked ding dong/musical chime bell including making connection testing etc. as required.

7

-

115

... More
Supply & Fixing ISI marked ( IS : 15683 ) Portable Fire Exitnguisher, ABC type, finished externally with red enamel paint, complete in all respects including initial fill and wall suspension of following capacity.

-

-

-

14

-

5450

... More
Supply & Fixing ISI marked ( IS : 15683 ) Portable fire Extinguisher, Carbon‐dioxide type flat base including valve, discharge hose of not less than 10 mm dia. min. 600 mm long & complete in all respects including initial fill with C02 gas confirming to IS:307‐1966 filled to a filling ratio of not more than 0.667and wall suspension bracket. Capacity 4.5 Kg.

-

-

-

... More
Capacity 4.5 Kg.

6

-

8950

... More
S & F of Electrical insulating rubber matts confirming to IS: 15652 / 2006 with one side anti skid abberation marks and pasting the mat with synthetic rubber adhesive as required. Gr-I

-

-

-

... More
3.3 KV, 2 mm thick with proof voltage 10 KV / 3 min. and Break Down Voltage 30 KV

4

-

1800

... More
P & F extra down rod of 15 mm dia . ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe including cutting, threading, drilling, fixing quarter pin etc as reqd. Gr-I

168

-

89

... More
P & F of 4 star rated vertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloy connection, testing etc. as required. Gr-I

-

-

-

... More
15 Ltr.

3

-

7532.5

... More
P & F of 36 Watt IP 20 LED 2'x2' fixture, Recessed / surface type, having efficacy of not less than 100 lumen / watt , made out from CRCA housing and with high purity / transmisvity duffuser for uniform light distribution high efficiency driver electronics and in compliance to IEC standard (integral with light fixture) , life time of more than 50000 burning hours, CCT 6000K (minimum), CRI80 driver maintaining PF0.9

43

-

3950

... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.

-

-

-

... More
3.5x.95 Sqmm

2

-

286

... More
P & F of capacitor start, metal body, metal blade three speed wall mounting fan of following sweep with the help of anchor bolts including making connection testing etc. as required.

-

-

-

... More
400 mm sweep(Oscillating type)

3

-

2649

... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.

-

-

-

... More
3.5 x 120.0 sq.mm

4

-

310

... More
P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and enamel paint including cutting, welding, holes etc.of following sizes as required.

-

-

-

... More
40mm x 40mm x 5mm

25

-

209

... More
P & F of IP20 LED Recess ed / Surface Mounted, Round / Sqaure Non- Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external BIS certified 2.5 KV surge B5o/o and in compliance to IEC standards. System Lumen efficacy of 100 lm / watt and life time of minimum 35000 Burning Hours with 700/o of intial Lumen maintaned, CCT 3000"K / 4000"K / 6000oK , maximum power consumption should not more than the specified rating and Fixture shall be of CE complianed.

-

-

-

... More
LED Downlight 18/20W

356

-

947

... More
SF of Current Transformer , with all necessary support in existing panel including connection etc. as required. Gr-I

-

-

-

... More
up to 150 / 5 Ratio , 5 VA , class 1 accuracy

15

-

306

... More
SITC of self contained drinking water cooler with energy efficient hermetic sealed type compressor, non cFC refrigerant suitable for operation on230v/LpH/50H2 ac supply, Full stainless steel [S30a)body and tank, stainless steel water tray, minimum two nos faucets and suitable drainage system complete in all respect with 300mm height MS fabricated and painted plateform. complete in all respect of the following capacify

-

-

-

... More
cooling capacity 150 Ltr./Hr. and storage capacity 150 Ltrs

9

-

59700

... More
SITC of self healing MPP/MP type shunt capacitor (banks) conforming to IS:13340-41 / IEC :831-1&2 in existing panel or parallel with load terminals , the capacitor shall be fitted with discharge resistors, pressure sensitive disconnector ( PSD ) and shall have dissipation factor less than 0.0025 at 50 Hz and total wattage loss less than 0.5 Watt per KVAR . including making connections with suitable capacity conductors/cables testing etc. as required. Gr-I

-

-

-

... More
Heavy duty Three phase 525 V, 50 Hz cylindrical capacitor (Bank)

40

-

546

... More
Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning.

-

-

-

... More
Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. (See Table E - 10 for specs.)

-

-

-

... More
8 Mtr.

10

-

12300

... More
Supply, Erection and Fixing of hot dipped galvanised Overhang (48.3 X 3.25 mm) with cap (400 x 88.9 / 114.3 x 3.25 mm) over the existing poles

-

-

-

... More
Single arm overhang

10

-

890

... More
SITC of microprocessor based three phase sensing power factor correction relay having following sensing capacity secondary current , self analysing auto c/k setting according to targeted power factor setting, the relay shall have digit display unit for display of real power factor, targeted power factor, lag/lead capacitor switching status, alarm output for under current, over current, insufficient compensation, indication of switching on units, auto/manual status, and shall have over load protection, no volt release , having multi parameter like KW, KVA, KVAR, metering facility as required. Gr-I

-

-

-

... More
6 to 8 stage

1

-

17205

... More
P & F Cam operated rotary switches on existing panel with 2 way and off position Gr-I

-

-

-

... More
16 AMP

4

-

250

... More
32 AMP

4

-

296

... More
P & F of ac operated heavy duty 230 /440 Volt power contactor conforming to IS:13947-4-1/ IEC:947-4-1 having provision of mechanical interlocking, auuxilary contacts, Din rail mounting type including making connections, testing etc. as required. Gr-I

-

-

-

... More
3 pole Power contactors with following AC 3 Rating

-

-

-

... More
Up to 12 Amp

4

-

608

... More
13 to 25 Amp

4

-

965

... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.

-

-

-

... More
3.5 core

142.83

-

299

... More
Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.

-

-

-

... More
3.5 x 50.0 sq.mm

4

-

132

... More
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes.

-

-

-

... More
GI pipe 2000 mm long ,63 / 80mm, Inner strip 50 mm x 3 mm copper

2

-

8970

... More
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.

-

-

-

... More
8 SWG copper Wire

50

-

79

... More
Supply and erection of GI Octagonal / Conical pole of following length and dimension as per table E-10 with base plate on the cement concrete foundation of M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS: 1367 P III ). The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. Gr-I

-

-

-

... More
Octagonal MS Poles made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. (See Table E - 10 for specs.)

-

-

-

... More
7 Mtr.

18

-

11800

... More
Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i)Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii)Provision for fixing of combined CT PT Set (To be supplied by DISCOMs), (iii)TT Block, (iv) 6mm Bakelite sheet on all sides, (V) 3/6 core copper cable for interconnections etc. as required. Gr-I

1

-

20813

... More
SITC of RO water system with Filtration stage = Particilate filter-Membrane life enhancer filter - sediment filter - Pre carbon filter -RO Membrane filter - Post carbon filter, Input power Rating - 230 v AC , 50 HZ, Percentage of Rejection TDS - 9oo/o or better having following features [a)Double purification by RO with ESS or latest technology with TDS indicator.[b)Spin welded RO Membrane Housing to prevent tempering.[cJ Push fit components for leak proof performance [dJ Fully automatic operation with auto start and auto off.(e)SS/ABS construction for corrosion free lifespan. (f Equally suitable for water from all bore wells, overhead storage tanks, water tankers and even municipal taps.[g)R0 Membrane Flushing - Auto Flush @ Every Start Every Stop and every One Hour of working for one minute. complete in all respect with followins capaciW

-

-

-

... More
Purification capacity - 50 LPH , Duty Cycle 270-500liters / day

9

-

56600

... More
P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.

-

-

-

... More
I P 43 Double Door(Single phase).

-

-

-

... More
6 way (6 O/G+2 I/C)

1

-

860

... More
P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. Armored Cable

-

-

-

... More
6.0 Sq. mm 2.0 core

71

-

124

... More
Maintenance free Gel Earthing with Pipe in pipe / Pipe in strip technology filled with anti corrosive conductive compound ( CPRI Tested ) below the ground in 150 - 200 mm dia. earth pit & surrounding filled with required mineral filling compound ( MFC should have hygroscopic property to retain the moisture for long time to create low resistance zone ) and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete testing of earth resistance as required. of following sizes. With Strip in Pipe Technology with 80 - 100 micron GI Coating

-

-

-

... More
GI pipe 2000 mm long ,50 / 25mm, ,terminal 12mm GI strip

1

-

6150

... More
SITC of Four Pole By pass Change Over Switch conforming to IS:13947(Part 3) : IEC:60947-3-1 and IEC:60947-6-1, Open execution type in the following ratings.

-

-

-

1

-

12240

... More
11 KV, 2.5 mm thick with proof voltage 22 KV / 3 min. and Break Down Voltage 45 KV

2

-

2300

... More
P & F in position frame made out of M.S. angle (riveted or welded) finished with two coats of red oxide and two coats enamel paint including cutting, welding, holes etc.of following sizes as required.For additional technical parameters of product / work refer Annexure 'A' attached with this BSR

-

-

-

... More
40mm x 40mm x 5mm

15

-

367



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.